TP-Link 3G/3.75G Router :: TL-MR3020 - PPTP Passthrough Does Not Work
Mar 19, 2013
Region : UnitedStates
Model : TL-MR3020
Hardware Version : V1
Firmware Version : latest
ISP :
I have problem to get pptp working. I setup pptp VPN server on my home router and configured pptp dialup on my laptop. If my laptop connect to internet directly, I am able to connect to home router via PPTP VPN. However, if I connect TL-MR3020 to internet(wired) and then connect my laptop to TL-MR3020 wirelessly, I can browse internet without problem. The problem is I cannot connect to home router via PPTP VPN any more. I believe the problem is on TL-MR3020.
View 4 Replies
ADVERTISEMENT
Apr 10, 2012
How to enable PPTP passthrough on Cisco ASA 5505?I have a RRAS server inside and the client is trying to connect from outside.
View 1 Replies
View Related
Sep 22, 2011
I'm trying to access a machine via pptp through a new WAG320n without any success. PPTP Passthrough is enabled i've opened port 1723 TCP pointing to my machines ip-adress but i can't get the connection working.
View 9 Replies
View Related
Feb 10, 2013
I add a new Cisco ASA 5505 as firewall in of company network. I found the PPTP authentication did not get through to internal Microsoft Server.
ASA Version 8.4(3)!names!interface Ethernet0/0switchport access vlan 2!interface Ethernet0/1switchport access vlan 2!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!interface Vlan1nameif insidesecurity-level 100ip
[Code]....
View 4 Replies
View Related
Jan 7, 2013
Region : Others
Model : TL-MR3020
Hardware Version : Not Clear
Firmware Version : 3.14.2
ISP :
Can I set to 3g And then go back to 4g when I want to?
View 1 Replies
View Related
Jan 25, 2013
Region : Others
Model : TL-MR3020
Hardware Version : V1
Firmware Version : TL-MR3020_V1_120817
ISP : Vodafone
Can TP-Link add more Countries like Malta we have Vodafone,GO, Melita ISPs
View 1 Replies
View Related
Oct 31, 2012
Region : Germany
Model : TL-MR3020
Hardware Version : V1
Firmware Version : 3.14.2 Build 120817 Rel.55520n
ISP : T-Mobile
is it at all possible to lock a 2G/3G-Stick to 2G or 3G with the TL-MR3020 (e.g. if the desired network (2G or 3G) strength is low)? If not, this would be a useful feature for upcoming firmware versions
View 3 Replies
View Related
Mar 6, 2013
Region : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version : 3.14.2 Build 120817 Rel.55520n
I Recently Purchased MR3020 it Connected well the First day, and everything was fine but second day it dint got connected with internet - when i plugged into the system i noticed that it is not identifying the 3g Stick (data Card) i also upgraded the firmware as directed by the Global Customer Care - but there was no Improvement there is no Reponse on Email or Phone from the Tp-Link Support.
View 1 Replies
View Related
Mar 11, 2013
Region : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
I set my TL-MR3020 to AP to act as a repeater to boost my wifi signal in the living.My TL-MR3020 is able to ping the main router but there is no internet access (no Internet light) on the TL-MR3020 . The main router ip is 192.168.1.1 and TL-MR3020 IS 192.168.254.0I followed exactly the instructions on how to configure the TL-MR3020 from TP-Link website and everything seems ok except no internet
View 3 Replies
View Related
Mar 12, 2013
Region : UnitedKingdom
Model : TL-MR3020
Hardware Version : V1
Firmware Version : mr3020nv1_en_3_14_4_up(121129).bin
ISP : Three mobile data sim
Possible to use a mobile via the usb connection on a TL-MR3020. The reason being is that my mobile data plan allows unlimited tethering through my phone...yet when I place the sim from the phone in the usb modem I get blocked by the provider stating that the sim can only be used in a mobile phone. Mobile data plans in the UK are very expensive and you get very little for your money.
View 3 Replies
View Related
Jan 23, 2013
Region : Philippines
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP : Smart Communications Inc.
TP Link,
Your 3g router model TL MR3020 is not compatible with USB modem WM66E. Is there a workaround for this? Any existing bin files?
View 2 Replies
View Related
Dec 17, 2012
Region : Brazil
Model : TL-MR3020
Hardware Version : V1
Firmware Version : V1.00 120817
ISP : CLARO (Brazil)
I have three 3G Routers TP-Link TL-MR3020 120 817 V1.00, a modem 3G Huawei E303C and another 3G modem ZTE MF-190 with ship operator CLARO (BRAZIL). I can not get 3G Router 3G modems work with these, although it is loaded with the latest firmware.
View 2 Replies
View Related
Feb 7, 2013
Region : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
Region : UnitedStates
Model : TL-MR3220
Hardware Version : Not Clear
Firmware Version :
ISP : None
I'm a court reporter trying to set up a connection between my laptop and my court reporting machine, which has built in wifi capabilities. My court house has public wifi but there is always some interference which causes transmission between my laptop and machine to freeze. I was told I could create my "own wifi" between my machine and laptop if i bought a router. is this possible with this hardware?I don't need the internet or want an internet connection. I have the internal modem in my laptop. I just want to provide a connection between my laptop and writing machine wirelessly. That is, data being sent back and forth between the two. (Like your headset and smartphone connected with Buetooth). I can use the Bluetooth method to connect the two, but I opted for wireless connection because Bluetooth still can have some interference when attorneys come in the courthouse building with a Blackberry smartphone. I heard this router will provide a secured, private wifi connection between my laptop and machine.It doesn't say anywhere in the instructions that how to do this or I just don't know which method to use this router for what I want to do. Is it WISP, AP or BRIDGE, etc...?
View 1 Replies
View Related
Feb 6, 2013
Region : U.SA
Model : TL-MR3220
Hardware Version : V2
I'm a court reporter trying to set up a connection between my laptop and my court reporting machine, which has built in wifi capabilities. My court house has public wifi but there is always some interference which causes transmission between my laptop and machine to freeze. I was told I could create my "own wifi" between my machine and laptop if i bought a router. is this possible with this hardware?
View 5 Replies
View Related
Feb 9, 2013
Region : Australia
Model : TL-MR3420
Hardware Version : V2
ISP : Optus, Telstra
Whilst the MR3420 V2 is sold as a 4G usb router, it appears that it does not support many usb 4G devices.In Australia we currently have the Seirra 320u, ZTE MF821 (100Mbps Cat 3) and Huawei E3276 (150Mbps Cat 4)whilst the V2 supports the first two (not the E3276), it has one major failure!It does not work at full 4G speeds.
The V2 does not appear to allow download speeds in excess of 25Mbps or uploads much greater than 2Mbps. This occurs on fast 3G and 4G networks.The throttled speed is apparently due to slow modem protocols deployed in the router. High protocol overheads mean it cannot 'shuffle data' very fast.We have developed working solutions using the Openwork platform that overcome these issues and provides speeds in excess of 70mbps.
View 10 Replies
View Related
Apr 4, 2013
Region : UnitedStates
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP : Virgin Mobile with MC760 antenna
In remote areas, I use Virgin-Mobile's MC760 Broadband2Go antenna to provide Broadband to my netbook. This ISP service requires that you "sign in" with username and password to initialize the BB transmission. I would like to use my TL-MR3020 to host the Virgin-Mobile's Broadband2Go MC760 antenna to provide a wireless hotspot, instead of the hardwired direct-computer connection I have. I've gone thru the MR3020 quick setup with the MC760 but been unable to get it to connect. The 3020 is putting out the wireless signal...it's just not connected to my Virgin-Mobiles BB service...thus no www internet tie. how to use the MR3020 with Virgin-Mobile's MC760 (3G/4G) Broadband2Go antenna?
View 3 Replies
View Related
Nov 13, 2012
Region : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version : 3.14.2 Build 120817 Rel.55520n
ISP : BSNL India
I bought this device yesterday, I am using this device with BSNL's EVDO (cdma network).It detects my modem fine, and it connects fine, and I can browse.Exactly at 50th min(few seconds difference), my net gets disconnected.I have tried all modes, connect manually, automatically, on demand -- nothing solves the concern.Changed idle timeout to 0.The device when connected directly works fine for more than 12 hours.Updated firmware to the latest 3.14.2 Build 120817 Rel.55520n.Tried Resetting the Router to factory defaults and configured again.Tried all troubleshooting steps from FAQ as in change it to WEP security, connect manually, idle timeout setting.Most importantly, tried creating a BIN file using USB sniffer and used it, even then its the same issue.
View 12 Replies
View Related
Jan 1, 2013
Region : Argentina
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP :
I wan't to buy this 3g router, buy i don't sure if my MD300 Sony Ericsson is compatible.There are some site with information? In the compatibility list it's not listed.
View 1 Replies
View Related
Apr 1, 2013
Region : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version : 3.14.2 Build 120817 Rel.55520n
ISP : HNS/Instanet (Cable Internet)
I am using the Router in 3G/4G mode, with WAN only (PPPOE) enabled. I have set a personal SSID in the Wireless > Wireless Settings > Wireless Network Name field.
I do not see the particular SSID on my computer, instead on every reboot / restart of the device a random SSID is generated. see attached screenshot. I can connect and everything works well, but I have to enter the WPA key after each reboot.
View 2 Replies
View Related
May 13, 2013
Region : Germany
Model : TL-MR3020
Hardware Version : V1
when visiting Switzerland and Italy with my German SIM card I noticed that roaming is not working very good with the TL-MR3020. The reason is that the internet provider needs to be set in the config, in my case to o2 Germany.When I travel with this SIM card to another country, I roam into other networks.As I cannot what provider is currently active (as o2 has contracts with almost every provider outside Germany) and even if I could see it I have to adjust the settings in the config if anything changes, the satisfaction effect on this trip was not very good.
Also I noticed that sometimes (only sometimes) the setting resetted itself to o2 Germany when unplugging the device, this added some extra negative satisfaction to everything.In my understanding the router should have an auto detection for the currently active network and auto setup for the dialin parameters and everything else. Like every smartphone on the planet. Maybe you can also add a setting where you can enable or disable data roaming to save people money if they do not have a international data option booked.
View 2 Replies
View Related
Jan 15, 2013
Region : UnitedStates
Model : TL-MR3020
I'm using a 3020 to bridge 3/4G to the ethernet port on my computer. Things work fine until I also join wireless hosts (like an iPhone or iPad). The routing of traffic to both the ethernet and wireless hosts seems to cause the 3/4G router to lose the signal and disconnect all hosts. I'm using a Verizon LG USB wifi device that is on the compatible list of 3/4G devices. I'm using the latest version of the firmware on the 3020 (I believe the date is Sep 2012).
View 1 Replies
View Related
Jan 15, 2013
Region : Hongkong
Model : TL-MR3020
Hardware Version : Not Clear
Firmware Version :
ISP :
I have installed a mini router type MR3020.I have set it up to WISP mode in order to get wifi signal from my main router and be able to deliver wifi to other devices The main router is working fine and I can access internet with no problem.However, the mini router, which detects the main router, is unable to supply internet connectivity. The ip addresses in teh WAN part under network is zero. Though I tried many times to renew the ip address I was not able to get a valid IP address.
View 2 Replies
View Related
Feb 7, 2013
Region : Turkey
Model : TL-MR3020
Hardware Version : Not Clear
Firmware Version : (120817)
ISP : turkcell
I have recently purchased the portable TP link 3020 which is a great solution for me in order to get wifi for multiple users till I get through the long process of getting ADSL in Turkey.The thing is that the 3G bundle Turkcell provided me with is not identified by the modem, so I looked it up on the internet and I found out that I needed to add the bin of the bundle, I searched within the list published on TPLINK website but without any luck.... finally I found the bin I was looking for in another country list... mine is Huawei E353 and the one I found is Huawei E353s2. Anyway I added the bin and still not luck identifying the bundle, I finally resorted to upgrade the firmware which I hate because I always worry of the bad consequence of failure, and unfortunately I was right! Once I upgraded the firmware, I couldn't get connected to the router, it keeps asking me for the key, but without any success! I tried hardware reset by holding the WPS button for 5 seconds as suggested in the manual, but any further success!
View 1 Replies
View Related
Aug 22, 2011
I have a DIR-655_RevB updated with the latest firmware 2.03NA. I have two VPN devices in my house trying to get to my corporate office: a VPN phone and my laptop with a VPN client, both use IPSec. Either device has no problem making a solid VPN connection separate from each other. Meaning that when my laptop is not connected, I can connect the VPN phone with no problem. And when the VPN phone is disconnected, the laptop also has no problem making a solid and stable VPN connection. So I know the router is configured correctly to let thru VPN traffic for either device. i.e. IPSec is enabled, UDP/TCP Endpoint Filtering are both set to Endpoint Independent (and I've tried every other combo), SPI is disabled.
The problem is that I need to have both devices connected simultaneously, which this router is supposed to handle. If I have the VPN phone connected first, then when I launch the laptop VPN client, the VPN phone gets disconnected. I'm assuming that at this point, all VPN traffic is being tunneled back to the laptop. I cannot re-establish the VPN phone connection until I disconnect the laptop client, at which point the VPN phone "automatically" reconnects (meaning I don't have to reboot it, the VPN traffic just somehoe gets redirected back to this device)
View 7 Replies
View Related
Jan 24, 2013
Region : United Kingdom
Model : TD-W8960N
Hardware Version : V3
Firmware Version :
ISP : ADSL24
How to successfully get VPN passthrough working with the W8960N?
I have the W8960N providing internet to local device. I want to setup a second router, TP-Link 1043ND with WW-DRT and PPTP set up to provide a separate access point for PPTP tunnelling to VPN servers outside of the UK. HideMyAss are providing VPN servers I wish to connect to.
I have followed instruction to set up both routers but would like to know if I am missing something.
First router 192.168.1.1 is basically untouched but with ports under NAT added: ports 1723 and 47 for my second router at local IP 192.168.1.111
Second router is set up according to [URL].
I know VPN work via just my first router. I can tunnel through using an Android tablet and connect to any HMA VPN server without changing anything on the 8960N.
View 1 Replies
View Related
Jan 18, 2013
set up my router. Trying to set up my 3G modem with TP-Link MR3020.
Tried troubleshooting to find out where it went wrong and just couldn't figure out. Just tried disabling the wireless security and *poof* I'm able to connect to the Internet. Right after setting up the Network Key, I can't connect to the Intertnet via my router.
Here are the datas.
Windows IP Configuration
Host Name . . . . . . . . . . . . : TOSHIBAM840
Primary Dns Suffix . . . . . . . :
[Code].....
View 5 Replies
View Related
May 15, 2006
Can I configure a PIX (515), as PPTP client to establish a tunnel with non-Cisco PPTP server ? Can my PIX initiate this type of connection ?Today, I use a PC with PPTP client to establish this and I want replace this with a PIX and I don´t want depends of a PC.
View 5 Replies
View Related
Sep 22, 2011
I have e3000 but in VPN Passthrough I don't have ( pppoe passthrough ). Just I have is ipsec + pptp + l2tp only. How could I add ppoe passthrough in my e3000.
View 2 Replies
View Related
Mar 23, 2013
Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Plusnet
I'm on a fibre connection from Plusnet and bought the TL-WR1043ND because of the advertised ability to use PPTP VPN to connect to my work server (the supplied Plusnet router doesn't allow it and is locked down).However, I cannot connect via PPTP VPN on this TL router either. I know my VPN settings are correct and I have had a brief search and found others have this problem, but short of installing third party firmware on the router, how to get this router running my PPTP VPN?
View 1 Replies
View Related
Mar 23, 2013
Region : Hongkong
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : TL-WDR4300_V1_121225
Even I have upgraded to the newest firmware for WDR-4300, it still not allowed me to connect to a windows PPTP VPN. It worked when I changed to use my old router. On the other hand, when I turned the hardware NAT, I found that the Cisco VPN connection would be dropped after I used for a few minutes. Similarly, it worked when I changed to use my previous old router.
View 7 Replies
View Related
Feb 18, 2011
I can't get the email to work from the router. It worked flawlessly for weeks then stopped working. I verified that the outgoing settings are still valid and that my antivirus is not blocking the email.
View 7 Replies
View Related
Aug 8, 2009
I have a DIR-825 since a couple of days, Hardware version B1, firmware 2.01EU (date Fri, 12, Jun, 2009 = latest european firmware) Have portforwarding for ports 25, 80, 443, 143, 993 via virtual server to a local linux server (192.168.0.3)
My (SIP protocol) VOIP phone (192.168.0.100) does not work anymore since I use this router. It worked fine on my old WRT54G. The phone logs-in normally at the voip provider but when I make a call, it seems that the ports are not forwarded or are blocked by the firewall. I have tried to manually setup portforwarding and virtual server instead of portforwarding.
I have tried many things, from disabling QOS, SPI, end point filtering and more but it does not work. I have also programmed DMZ for my ip-phone, but it does not work. Nothing found in the logfiles about frame drops. (I have setup a syslog on my linux-server)
There seems to be a bug causing frames dropped, as my setup has always worked with my WRT54, and should work with DMZ set, but it does not. The same setup works fine on a DIR-655 of a friend.
View 14 Replies
View Related
Jan 15, 2013
Region : New Zealand
Model : TL-MR3420
Hardware Version : V2
Firmware Version :
ISP : Telecom New Zealand
getting the MR3420 but will be using a ZTE 669 Turbo stick as the modem ISP Telecom New Zealand.I did notice that they seem to be supporting the ZTE 668+ which I'm guessing is a vary similar model.
View 3 Replies
View Related
