TP-Link 3G/3.75G Router :: MR3020 - Internet Access Required To Set This Up?
Feb 6, 2013
Region : U.SA
Model : TL-MR3220
Hardware Version : V2
I'm a court reporter trying to set up a connection between my laptop and my court reporting machine, which has built in wifi capabilities. My court house has public wifi but there is always some interference which causes transmission between my laptop and machine to freeze. I was told I could create my "own wifi" between my machine and laptop if i bought a router. is this possible with this hardware?
View 5 Replies
ADVERTISEMENT
Mar 11, 2013
Region : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
I set my TL-MR3020 to AP to act as a repeater to boost my wifi signal in the living.My TL-MR3020 is able to ping the main router but there is no internet access (no Internet light) on the TL-MR3020 . The main router ip is 192.168.1.1 and TL-MR3020 IS 192.168.254.0I followed exactly the instructions on how to configure the TL-MR3020 from TP-Link website and everything seems ok except no internet
View 3 Replies
View Related
Jan 15, 2013
Region : Hongkong
Model : TL-MR3020
Hardware Version : Not Clear
Firmware Version :
ISP :
I have installed a mini router type MR3020.I have set it up to WISP mode in order to get wifi signal from my main router and be able to deliver wifi to other devices The main router is working fine and I can access internet with no problem.However, the mini router, which detects the main router, is unable to supply internet connectivity. The ip addresses in teh WAN part under network is zero. Though I tried many times to renew the ip address I was not able to get a valid IP address.
View 2 Replies
View Related
Jan 18, 2013
set up my router. Trying to set up my 3G modem with TP-Link MR3020.
Tried troubleshooting to find out where it went wrong and just couldn't figure out. Just tried disabling the wireless security and *poof* I'm able to connect to the Internet. Right after setting up the Network Key, I can't connect to the Intertnet via my router.
Here are the datas.
Windows IP Configuration
Host Name . . . . . . . . . . . . : TOSHIBAM840
Primary Dns Suffix . . . . . . . :
[Code].....
View 5 Replies
View Related
Jan 7, 2013
Region : Others
Model : TL-MR3020
Hardware Version : Not Clear
Firmware Version : 3.14.2
ISP :
Can I set to 3g And then go back to 4g when I want to?
View 1 Replies
View Related
Jan 25, 2013
Region : Others
Model : TL-MR3020
Hardware Version : V1
Firmware Version : TL-MR3020_V1_120817
ISP : Vodafone
Can TP-Link add more Countries like Malta we have Vodafone,GO, Melita ISPs
View 1 Replies
View Related
Oct 31, 2012
Region : Germany
Model : TL-MR3020
Hardware Version : V1
Firmware Version : 3.14.2 Build 120817 Rel.55520n
ISP : T-Mobile
is it at all possible to lock a 2G/3G-Stick to 2G or 3G with the TL-MR3020 (e.g. if the desired network (2G or 3G) strength is low)? If not, this would be a useful feature for upcoming firmware versions
View 3 Replies
View Related
Mar 6, 2013
Region : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version : 3.14.2 Build 120817 Rel.55520n
I Recently Purchased MR3020 it Connected well the First day, and everything was fine but second day it dint got connected with internet - when i plugged into the system i noticed that it is not identifying the 3g Stick (data Card) i also upgraded the firmware as directed by the Global Customer Care - but there was no Improvement there is no Reponse on Email or Phone from the Tp-Link Support.
View 1 Replies
View Related
Mar 12, 2013
Region : UnitedKingdom
Model : TL-MR3020
Hardware Version : V1
Firmware Version : mr3020nv1_en_3_14_4_up(121129).bin
ISP : Three mobile data sim
Possible to use a mobile via the usb connection on a TL-MR3020. The reason being is that my mobile data plan allows unlimited tethering through my phone...yet when I place the sim from the phone in the usb modem I get blocked by the provider stating that the sim can only be used in a mobile phone. Mobile data plans in the UK are very expensive and you get very little for your money.
View 3 Replies
View Related
Jan 23, 2013
Region : Philippines
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP : Smart Communications Inc.
TP Link,
Your 3g router model TL MR3020 is not compatible with USB modem WM66E. Is there a workaround for this? Any existing bin files?
View 2 Replies
View Related
Dec 17, 2012
Region : Brazil
Model : TL-MR3020
Hardware Version : V1
Firmware Version : V1.00 120817
ISP : CLARO (Brazil)
I have three 3G Routers TP-Link TL-MR3020 120 817 V1.00, a modem 3G Huawei E303C and another 3G modem ZTE MF-190 with ship operator CLARO (BRAZIL). I can not get 3G Router 3G modems work with these, although it is loaded with the latest firmware.
View 2 Replies
View Related
Feb 7, 2013
Region : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
Region : UnitedStates
Model : TL-MR3220
Hardware Version : Not Clear
Firmware Version :
ISP : None
I'm a court reporter trying to set up a connection between my laptop and my court reporting machine, which has built in wifi capabilities. My court house has public wifi but there is always some interference which causes transmission between my laptop and machine to freeze. I was told I could create my "own wifi" between my machine and laptop if i bought a router. is this possible with this hardware?I don't need the internet or want an internet connection. I have the internal modem in my laptop. I just want to provide a connection between my laptop and writing machine wirelessly. That is, data being sent back and forth between the two. (Like your headset and smartphone connected with Buetooth). I can use the Bluetooth method to connect the two, but I opted for wireless connection because Bluetooth still can have some interference when attorneys come in the courthouse building with a Blackberry smartphone. I heard this router will provide a secured, private wifi connection between my laptop and machine.It doesn't say anywhere in the instructions that how to do this or I just don't know which method to use this router for what I want to do. Is it WISP, AP or BRIDGE, etc...?
View 1 Replies
View Related
Feb 9, 2013
Region : Australia
Model : TL-MR3420
Hardware Version : V2
ISP : Optus, Telstra
Whilst the MR3420 V2 is sold as a 4G usb router, it appears that it does not support many usb 4G devices.In Australia we currently have the Seirra 320u, ZTE MF821 (100Mbps Cat 3) and Huawei E3276 (150Mbps Cat 4)whilst the V2 supports the first two (not the E3276), it has one major failure!It does not work at full 4G speeds.
The V2 does not appear to allow download speeds in excess of 25Mbps or uploads much greater than 2Mbps. This occurs on fast 3G and 4G networks.The throttled speed is apparently due to slow modem protocols deployed in the router. High protocol overheads mean it cannot 'shuffle data' very fast.We have developed working solutions using the Openwork platform that overcome these issues and provides speeds in excess of 70mbps.
View 10 Replies
View Related
Mar 19, 2013
Region : UnitedStates
Model : TL-MR3020
Hardware Version : V1
Firmware Version : latest
ISP :
I have problem to get pptp working. I setup pptp VPN server on my home router and configured pptp dialup on my laptop. If my laptop connect to internet directly, I am able to connect to home router via PPTP VPN. However, if I connect TL-MR3020 to internet(wired) and then connect my laptop to TL-MR3020 wirelessly, I can browse internet without problem. The problem is I cannot connect to home router via PPTP VPN any more. I believe the problem is on TL-MR3020.
View 4 Replies
View Related
Apr 4, 2013
Region : UnitedStates
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP : Virgin Mobile with MC760 antenna
In remote areas, I use Virgin-Mobile's MC760 Broadband2Go antenna to provide Broadband to my netbook. This ISP service requires that you "sign in" with username and password to initialize the BB transmission. I would like to use my TL-MR3020 to host the Virgin-Mobile's Broadband2Go MC760 antenna to provide a wireless hotspot, instead of the hardwired direct-computer connection I have. I've gone thru the MR3020 quick setup with the MC760 but been unable to get it to connect. The 3020 is putting out the wireless signal...it's just not connected to my Virgin-Mobiles BB service...thus no www internet tie. how to use the MR3020 with Virgin-Mobile's MC760 (3G/4G) Broadband2Go antenna?
View 3 Replies
View Related
Nov 13, 2012
Region : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version : 3.14.2 Build 120817 Rel.55520n
ISP : BSNL India
I bought this device yesterday, I am using this device with BSNL's EVDO (cdma network).It detects my modem fine, and it connects fine, and I can browse.Exactly at 50th min(few seconds difference), my net gets disconnected.I have tried all modes, connect manually, automatically, on demand -- nothing solves the concern.Changed idle timeout to 0.The device when connected directly works fine for more than 12 hours.Updated firmware to the latest 3.14.2 Build 120817 Rel.55520n.Tried Resetting the Router to factory defaults and configured again.Tried all troubleshooting steps from FAQ as in change it to WEP security, connect manually, idle timeout setting.Most importantly, tried creating a BIN file using USB sniffer and used it, even then its the same issue.
View 12 Replies
View Related
Jan 1, 2013
Region : Argentina
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP :
I wan't to buy this 3g router, buy i don't sure if my MD300 Sony Ericsson is compatible.There are some site with information? In the compatibility list it's not listed.
View 1 Replies
View Related
Apr 1, 2013
Region : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version : 3.14.2 Build 120817 Rel.55520n
ISP : HNS/Instanet (Cable Internet)
I am using the Router in 3G/4G mode, with WAN only (PPPOE) enabled. I have set a personal SSID in the Wireless > Wireless Settings > Wireless Network Name field.
I do not see the particular SSID on my computer, instead on every reboot / restart of the device a random SSID is generated. see attached screenshot. I can connect and everything works well, but I have to enter the WPA key after each reboot.
View 2 Replies
View Related
May 13, 2013
Region : Germany
Model : TL-MR3020
Hardware Version : V1
when visiting Switzerland and Italy with my German SIM card I noticed that roaming is not working very good with the TL-MR3020. The reason is that the internet provider needs to be set in the config, in my case to o2 Germany.When I travel with this SIM card to another country, I roam into other networks.As I cannot what provider is currently active (as o2 has contracts with almost every provider outside Germany) and even if I could see it I have to adjust the settings in the config if anything changes, the satisfaction effect on this trip was not very good.
Also I noticed that sometimes (only sometimes) the setting resetted itself to o2 Germany when unplugging the device, this added some extra negative satisfaction to everything.In my understanding the router should have an auto detection for the currently active network and auto setup for the dialin parameters and everything else. Like every smartphone on the planet. Maybe you can also add a setting where you can enable or disable data roaming to save people money if they do not have a international data option booked.
View 2 Replies
View Related
Jan 15, 2013
Region : UnitedStates
Model : TL-MR3020
I'm using a 3020 to bridge 3/4G to the ethernet port on my computer. Things work fine until I also join wireless hosts (like an iPhone or iPad). The routing of traffic to both the ethernet and wireless hosts seems to cause the 3/4G router to lose the signal and disconnect all hosts. I'm using a Verizon LG USB wifi device that is on the compatible list of 3/4G devices. I'm using the latest version of the firmware on the 3020 (I believe the date is Sep 2012).
View 1 Replies
View Related
Feb 7, 2013
Region : Turkey
Model : TL-MR3020
Hardware Version : Not Clear
Firmware Version : (120817)
ISP : turkcell
I have recently purchased the portable TP link 3020 which is a great solution for me in order to get wifi for multiple users till I get through the long process of getting ADSL in Turkey.The thing is that the 3G bundle Turkcell provided me with is not identified by the modem, so I looked it up on the internet and I found out that I needed to add the bin of the bundle, I searched within the list published on TPLINK website but without any luck.... finally I found the bin I was looking for in another country list... mine is Huawei E353 and the one I found is Huawei E353s2. Anyway I added the bin and still not luck identifying the bundle, I finally resorted to upgrade the firmware which I hate because I always worry of the bad consequence of failure, and unfortunately I was right! Once I upgraded the firmware, I couldn't get connected to the router, it keeps asking me for the key, but without any success! I tried hardware reset by holding the WPS button for 5 seconds as suggested in the manual, but any further success!
View 1 Replies
View Related
Nov 27, 2012
I have recently purchased a RVS4000 router and am experiencing major downtime.Almost everyday the RVS4000 router losing internet connectivity. I noticed that when this happens I cannot login into the router from my pc which is connected to the RVS4000 network.The only way to restore connectivity is to restart the RVS4000 by disconnecting power and powering back up.The router's WAN is connected to my Cable modem.The RVS400 has two PC connected to it. (port 3 & 4) I have a Cisco 8-port switch connect to the RVS4000 with 3 additional PCs/devices on it.
View 6 Replies
View Related
Nov 11, 2012
is it possible to eliminate the the guest login screen from being displayed/required to acess router from an added device(like a smart tv with a web browser)?router is an e2500,approx.
View 4 Replies
View Related
Oct 5, 2011
I am using wireless internet via D link router.I am connected to the router but there is no access to the internet.There is a small yellow triangle appearing on the wireless Network icon at the right bottom corner of my laptop.I can browse and download but I am getting the message that no internet access.
View 10 Replies
View Related
Jan 7, 2013
I am having a problem in setting up my Router. Its "TP-LINK WR 720N". I have a LAN connection in the main PC and a further dialer like thing with user name and password is executed to access the internet. Each of the customers have diff IDs and passwords based on the bandwidth of the connection. The problem is that first am i connecting the Router in the right way? I put the main LAN cable into the Router's WAN port and the Other Ethernet wire i put is that from PC's Lan port to Router's LAn port. Is this right? I am confused because in the guide a modem is also mentined and i think thats for DSL users...
If i use the above settings, my LAN gets connected and the dialer also works and gets connected but when i access the internet from it, that doesn't work and no webpage opens.
Similarly, the Wireless connetion is displayed in the Laptop and when i access it, it gets connected, but it has a yellow exclamation mark in it, and the same goes here that the internet does not work. My internet connection id fine because i am sing internet no using main Lan ports of Pc, so i guess the problem i s with my Settings...
View 2 Replies
View Related
Jul 27, 2012
I've had my DIR 615 router for quite some time. The hardware version is C1, firmware 3.01 originally. It's been fine for the most part (asides from connection issues now and then with the internet - which we rectified by unplugging modem and/or router). A couple nights ago we had a storm and the next morning the router would not connect to the internet. I tried unplugging the router and modem a number of times but could never establish a connection. The internet globe LED was originally orange but after I cut off the power, it never came back on. I tried a number of different cables between the modem and router and could not fix the issue. I bypassed the router totally and the internet works fine. After a lot of failed attempts, I decided to reset the router and reinstall it with the disc. I followed the instructions and kept getting error 322 that the router could not be found. I tried 3 different computers and 5 different wires to fix the problem but to no avail. I kept encountering the same error on each computer. Since the router can't be seen, I must bypass it totally to get any internet access so trying the online setup doesn't work because I can't connect to the router and then to the modem since there is no internet access. So now I'm stuck. I'm not sure if my router is damaged from the storm. All other lights work (LAN and wireless icon) but I can't get any internet access through the router. I'm not sure if I should just go buy another router or not. The installation checks out fine until connecting power to the router and then it can't be found.
I am running windows 7 and vista on different computers and laptops and used setup 4.1.7141.2
View 1 Replies
View Related
Jan 14, 2012
I just bought the 655, mainly for school/Xbox. My parents use it also, but I bought it for myself mainly (shh). I set it up correctly and got connected, but suddenly I wasn't allowed Internet access. The router connects to my laptop, but won't get Internet access. I called customer service and he didn't know what to do. We tried everything he knew and nothing worked. I don't want to return the router cause I read it was very good, but I need internet for school. I have Rev. A and F/W 2.00.
View 8 Replies
View Related
Aug 6, 2012
Im using d-link 855 router to block internet to certain machines, using access control within dlink and then in putting the ip for the right machines. But it seems the machines keep changing the IP adresses everything they boot thus getting internet access the next day.
View 14 Replies
View Related
Feb 22, 2011
Since I got my TP-Link 1043ND working in a previous thread I thought that my second router could be in good use at my brothers house about 50m from mine.I've got a modem in the basement, it's wired to the first router (TP-Link), the TP-Link sends wireless signals to five units, one of those units are my brothers computer. The Internet works fine on every unit.Now I thought maybe my brother will have better wireless signals to the first router if I connect a second router between. I guess the second router should be working like a switch then.I have the both routers MAC addresses. I got inside the first router and entered the WDS option, I chose LAN instead of Disabled and entered the second routers wireless MAC. Then I took the first routers MAC and entered it in the second routers WDS options MAC and Enabled it. It didn't work so I entered Static Routing Table on the second router and entered the first routers IP (started with 85.228) which I found in the dd-wrt menu. Then I entered same Netmask as the first router and the same Gateway with the interface LAN. No Internet access thou from the second router.The second routers LAN IP is set to 192.168.1.3 (the second router has 192.168.1.2 as LAN IP). DHCP is set to disabled at the second router. The funny thing is if I set the second router to the same LAN IP as the first router and the same DHCP settings with DHCP enabled it says that I have Internet Access but I can't enter the Internet
View 4 Replies
View Related
May 19, 2011
My desktop recently broke so i bought my first laptop. I have AT&T DSL and i bought a new D-Link DSL-2640B modem/router so i could have wireless internet. I installed it and i was able to use it with the ethernet cable, however when i tried to use wifi, it worked for only about 2 minutes before it disconnected.. Now when i try again it says that it is connected (full 5 bars) but it also says there is no internet access and i cannot use the internet.
Also, before, with the old modem i was able to just connect the ethernet cable to the laptop and just start using the internet. Now i have to connect by putting in my username and password provided by my ISP almost like if it was dial up. I don't know why i have to do this now but not before.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz, Intel64 Family 6 Model
[Code].....
View 4 Replies
View Related
Nov 13, 2011
I migrated my internet from PPPOE to DHCP. My wifi is working with no problem but when I hook up my computer to 1 of the 4 Lan ports I can't seem to connect to the internet I can however log in my router no problem. But I don't get internet access... I wonder what could be the problem. I tried resetting my router and modem to see if just a bug or something but to no avail.
View 5 Replies
View Related
Jul 28, 2011
I am trying to setup a DIR-601 wireless router (Hardware Version: A1 Firmware Version : 1.00NA ) with my connection from Astound.I am able to connect to the internet from the cable modem (Motorola SURFboard SB5101) but I am unable to get it to work through the router. All the lights on the router look ok.When I look at the WAN status from the router setup page I see :
WAN
Connection Type : DHCP Client
Cable Status : Connected
Network Status : Disconnected
Connection Up Time : N/A
[code]....
* I noted that the router did not show me the correct time. Is that normal ?I have even copied my laptop's MAC address but it did not work. I restarted the modem and the router a number of times but to no avail.
View 1 Replies
View Related
Jan 14, 2011
I have managed to get the wireless portion of my router working for the two wireless laptops in my house (one is Win XP, the other Linux) and am now trying to connect via rj45 ports + ethernet cat5e cable, my router and desktop computer that is running Windows XP. My connection type, set when I setup my wireless router, is pppoe.I have my router connected to a SpeedStream Modem, my ISP is Bell.I am worried that I will have to purchase a hub/switch in order to allow the desktop (PC3) to access the internet, although it seems to me (from reading other internet postings) that what I am attempting to do should work with just the modem+router setup that I have.I haven't worked with Windows LAN networks before (wired, not wireless) I have only dealt with my laptop's wireless internet connections and it seems much simpler to deal with than wired lan connections.
View 1 Replies
View Related
