WIth Chrome it does work although a bit slow. With IE as-well.Had the problem with FB as-well allthough that i could cancel with allowing it to connect.Gmail doesnt.Production Security Services and the certificates seem to cause problems.Searched the internet; tried a scan, checked the date, activataed the SSL and TLS in the browsercertificates, the server and organisations names.
View 4 RepliesI have a Windows7 laptop that was working fine til yesterday.I switched it on at home last night and it picked up my wireless connection but when I opened IE or Firefox it would not access any webpage (blank screen, no address that its resolving on status bar at the bottom and just a progress bar (IE) or a 'searching' icon (firefox)The network connection page in control panel says that it is connected and I can ping sites from the command prompt and some other software such as skype seems to be connecting.I have disable both bullguard firewall and made sure the windows firewall is off.I have come into work this morning and am getting the same problems, even when connected by ethernet cable, I can also see other computers on the network.I was occasionally getting a dial up connection pop up box appearing from an old dial-up connection I had set up, but have now deleted this connection.
View 2 Replies View RelatedI have a Windows7 laptop that was working fine til yesterday. I switched it on at home last night and it picked up my wireless connection but when I opened IE or Firefox it would not access any webpage (blank screen, no address that its resolving on status bar at the bottom and just a progress bar (IE) or a 'searching' icon (firefox) The network connection page in control panel says that it is connected and I can ping sites from the command prompt and some other software such as skype seems to be connecting. I have disable both bullguard firewall and made sure the windows firewall is off.
I have come into work this morning and am getting the same problems, even when connected by ethernet cable, I can also see other computers on the network.
I was occasionally getting a dial up connection pop up box appearing from an old dial-up connection I had set up, but have now deleted this connection.
Firefox opens but no download sites open.
View 7 Replies View RelatedWhen i access a url with http, it works fine. But with https it dosen't work, and get the message on the firefox as "The proxy server is refusing connections Firefox is configured to use a proxy server that is refusing connections. Check the proxy settings to make sure that they are correct. Contact your network administrator to make sure the proxy server is working.
View 1 Replies View Relatedaccess https sites from my PC? I cannot access these sites from IE 9 nor Firefox 6. I even disable firewall to try getting access to the secured websites but to no avail. But this problem recently cropped up when i upgraded my PC from XP to Windows 7.
View 11 Replies View RelatedI just put together a new computer. After putting it together I installed Windows 7 64-bit. My problem is that every "https" website I go to fails at its certificate validation. Every browser I use (Firefox 4, Chrome, IE9) warns me that the security certificate failed the validation. If I click "continue anyway" the browser shows a blank page. This happens for every https site. I have tried mail.live.com, mail.google.com, bankofamerica.com, etc. I can't even connect to windows update (which is really bad). The problem is limited to this computer. All my other computers (2 laptops with windows 7 32 bit) connect to websites using https just fine. My computer is freshly installed, but I scanned for spyware/viruses/trojans and came up empty.
View 1 Replies View Relatedwhen my Linux VM is running!How's this for a mystery - last night I noticed that I could no longer access my gmail. Thought it might be down. This morning, I still couldn't access it. Thought I would try comcast, no joy either. Changed computers, no difference. Changed routers, no difference. Bought a new router and started plugging in network cables one at a time. My main machine first, everything works - http and https sites, a second computer, all good. The switch. Fine. Powerline. Still good. Then I plug in a Windows server running a Linux VM. Https sites on all the other machines stop working. Pause the Linux VM, restart router - https sites return to life. Went to Linux machine, re-enabled ipv6 (the only recent change on the Linux machine was to disable ipv6 since upon a reboot, Linux didn't have an ipv4 address). Restart Linux everything seems fine. A few hours go by, try to connect my wife's new laptop and at that moment wireless seems to stop. Restart router, wireless is back. But lo and behold, https is gone again. Unplug the machine that has the Linux VM, restart router, all is good.Ever see anything this weird?
View 3 Replies View RelatedUsing webvpn on a 2811 w/ adv ent 12.4(20)THTTP sites work fine (in the url-list)
But when we try to use an HTTPS site, clicking on that site just hangs forever. Debugs show the connection is making it, and the servers are getting the connections...
The destination servers are using self-signed certs, as well as the router. They are not requiring client certs.
I have a WRVS4400N I am able to block http sites such [URL] but everybody have access to [URL]
View 2 Replies View RelatedThis problem just started. I am unable to load certain https sites (for work). If i directly connect to ethernet, it works, so my isp isnt my problem. When i try to connect to the sites, it says "sending request" then times out. I have played around with the settings non stop and nothing has worked. I have a mac running 10.7.5.
View 3 Replies View RelatedI can connect to my Linksys router at 192.168.1.1 with IE but not with Firefox. What's with Firefox?
View 3 Replies View RelatedI cannot connect to the internet using firefox or chrome but there's no problem with internet explorer. This happened after I installed and uninstalled speedbit video accelerator. When opened chrome, it gave me the following
error.
(net::ERR_NAME_RESOLUTION_FAILED): Unknown error.
After the problem occurred, I rebooted the system, uninstalled firefox and chrome, freshly downloaded firefox (from IE) and the problem persists. I couldn't download chrome because chrome installer says it can't connect to the
internet. Following are the details regarding my system and software.
o/s : windows 7 ultimate
internet explorer : 9.0.8112.16421 64 bit
firefox : 14.01
[Code].....
I tried stopping the firewall and the problem persists. Can't access router via firefox too!! Firefox doesn't give an error it just gives a blank page (about:home).
If this is a dns problem, how come it doesn't affect IE ?? Why can't utorrent listen on listen port ??
Am experiencing the same problem where IE can connect to internet, but not Chrome, although the only change to my desktop PC (WinXP SP3) was a windows update. This issue seems to be quite common among all Windows OS because when I queried "can't connect chrome to internet" I've found over 50 posts at various forum describing your issue (and mine). I have also eliminated firewall, antivirus, etc and obviously since IE can get on the internet..my network connection is fine...as is/was yours. Looking more closely I'm thinking that somehow the specific port on outbound is not being accessed by Chrome/Firefox because I used a sniffer and see no request leave my pc and verified no request through my router either.
The winsock catalog in a namespace server configuration listing right? How would you explain that resetting the winspace catalogue fixes the issue?Wand3r3r said it was malware, but I'm quite sure we don't have that issue...I know my machine doesn't and this has occured on the library PCs also. I wan't to find sure fix and understand what is happening on the Windows stack, so that I can assuredly deploy Chrome on a student network and not see this re-occuring all over the place.
I have reset my wireless connection numerous times, rebooted, tried wireless and wired and continue to have the same result - great signal; cannot connect to any webpage. Ran network diagnostics and everything seems to check out except the "DNS Server."
Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:Documents and SettingsMarcy Musselman>ipconfig /all
Windows IP Configuration Host Name . . . . . . . . . . . . : MARCYS Primary Dns
[Code].....
MY ISP installed one router in my lab.for internet connectivity they mail me steps :connect your Laptop directly to gi0/3 port to check internet connectivity with public ip 1.1.1.x and Gateway 1.1.1.1 with subnet mask 255.255.255.240 after connection I surprised because I am able to access only google sites like gmail,google search etc. but I am able to ping/traceroute all sites.from browser I am able to access only google sites only.In Router no firewall no such access list.
View 2 Replies View Relatedmy situation is that i have to connect 2 site which are 1km apart our data speed requirement is not so high 64kbps is enough so i heard this kind of setup is it best
View 3 Replies View RelatedI've been having problems for the past couple of weeks trying to connect to some websites. It is only SOME, not all websites. It will either say that it is taking too long to connect or that the website is experiencing problems.
View 9 Replies View Relatedcan't access gmail or any https sites at all such as fnb.co.za or auction sites ect... I've tried resetting my rooter, configured all the settings as they were when working, I have basically gone into my network & sharing centre and change adapter settings to make sure all the settings there are as should be, reset , & config all of those as well, I've also gone into cmd and reset my D-link completelly from the command, and also tried to restore my computer to an earlier stage which did not work either , Now all I can gather is that It has to be a block some where most likely with the rooter , which is blocking access to port 443.
View 14 Replies View RelatedI'm trying to access my ASA 5505 by https://192.168.1.1 but I can't. I'm using Windows 7. I already have installed ASDM and I can enter in the box by ASDM. I am preparing to reformat my PC and I'm afraid that I won't be able to access my ASA if I do.
The Mozilla show the message: An error occurred during a connection to 192.168.1.1.Cannot communicate securely with peer: no common encryption algorithm(s).(Error code: ssl_error_no_cypher_overlap)
Can't connect to sites such as this GamersFirst Forums -> International APB Reloaded Forums, unless I use a proxy site.Nor does connecting to the game works, either. But it works for my friends, apparently.I checked the router settings, no go. Turn the firewall and Norton on and off, and still the same. I even tried accessing on my sister's computer which is also connected to the same router, and it connects. Only my computer doesn't connect to some certain sites.
View 3 Replies View RelatedI have a laptop that works perfectly fine when plugged into a network cable, but the wifi refuses to work. It pulls an ip, and everything looks good when I run ipconfig/all, but it can't even ping the router. All other computers on the network are working fine. I've flushed dns, set static IP and DNS, uninstalled/reinstall device, updated drivers, bios, and firmware, and even created a backup image of the computer and reloaded the os using the recovery partition. The event log doesn't tell me anything, and there are no flags in the device manager. I'm at a complete and total loss. I cannot figure this one out.The laptop is a Compaq Presario CQ50-142US. Vista 32bit OS. Everything was working perfectly fine before it got a virus. I ran through the standard procedures of AVG, Malwarebytes, TDSSKiller, and even resorted to Combofix, but somewhere along the line the wifi dropped off and will not come back.I even double checked the HOSTS file and IE proxy settings to ensure I wasn't crazy; although I know those should've affected the wired connect too.My last step is to either replace the wifi chip (which I don't think is the problem), or wipe it and load the os from scratch, but I don't have an oem disc since it has the recovery partition.
View 14 Replies View RelatedI can't access some sites, loading times are endless and they look totally strange when I can access them (No images and so on). Sites are completely random, some examples are GamersLegacy.it - Starcraft 2, Diablo 3, Dota2, World of Warcraft, League of Legends, Inferno eSports - Homepage (videogames forum)FINECO: Conto, Investimenti, Trading, Prestiti e Mutui - Banca diretta, online o con promotore (bank) Sigma Draconis
1) Cleaned laptop with Ad-aware and Malwarebytes, found 2 issues but didn't fix the problem.
2) Closed firewall, nothing either.
3) Canghed/flushed DNS, tried both openDNS and GoogleDNS, nothing.
4) She CAN access those sites, she has same connection to the router (via wireless) and she has same OS (Windows Seven). I think that means it's my problem, not a router one.
5) Tried to lower MTU settings in my wireless connection as I read that could be the problem, nothing new here.
6) Here comes the tricky part. I tried to access those sites via proxy (Ninja Cloak | Fast, free, anonymous web browsing with NinjaCloak.com) and they actually work!
I have dir655 Hardware Ver B1 Firmware Version: 2.10NA.Comcast Motorola cable modem surfboard SB5101. The problem started happening a couple of days ago. When my computer is hooked up to the cable model directly, i am able to connect to outlook.com just fine but when i go through my router, it can't connect to the site. I played with MTU (lower it by 10) all the way to 1300 but it didn't work.The problem started happening all the sudden without any changes in the cable modem, router or my computer.
I also tried cloning MAC address from my pc but didn't work.I also tried turn off both modem and router, wait 2 minutes, start modem, wait for all lights to come up and start the router.Sites i can't connect are: outlook.com, starcraft2, Comcast, eBay, Facebook.One thing that i noticed weird is that i am able to connect to cnn.com using IE9 just fine but ping shows: [code]
I'm having problems connecting to certain sites on the internet through one computer. I can connect ok on other computers going through the same home network. On the one computer that is having problems I can connect to the site but then when I click on a link I get unable to connect then I can reload the page and some times it connects to the page. So as I am browsing through the site almost every time I click on a link I get unable to connect and have to keep reloading the page.
View 5 Replies View RelatedWe can't find the Linksys router's manual and have no clue what is causing our WiFi not to let us access certain websites. For example, we are unable to access the Microsoft, Target, our local Library, YouTube and some other ones that we find out about once it doesn't let us get on them. We thought it was an issue with Microsoft Security Essentials because we hadn't updated it correctly, but that was not it. The reason we know it is OUR WiFi because we can access the sites I mentioned above whenever we use our apt complex WiFi, so it is not our laptop. We have the same problem with this when using our wifi on our iTouch. I hope that all made sense (had to access this site with my phone.)
View 13 Replies View RelatedI'm trying to solve up a really nasty problem I have at home and I've come here hoping to find some answers. Since last Saturday, I am unable to access certain internet sites when at home. Strangely enough everything was fine before that. Went to bed around midnight local time and when I went to check those sites after work at around 3:30 pm local time I could not get on those sites. For some reason the pages just keep on endlessly loading, giving me only a blank page. What is also strange is that no computer in my house can access those sites. So it's not limited to one computer.
View 1 Replies View RelatedI have inherited a sbs 2008 network where they have a SBS2008 server and Server2008 running as a terminal sever at the main office and they have 2 satellite offices. These offices all connect through router to router vpn tunnels. The main site is on 10.0.0 and dhcp is done by the sbs. Satellite site a is on 10.0.10 and dhcp is done by the vpn router and Satellite site b is on 10.0.5 and dhcp is also done by the vpn router. All client computers can run rdp to access shares / programs etc on the two servers but when trying to push out group policy, antivirus updates or even using remote control through the SBS2008 server it is hit or miss. DHCP records on the SBS server do not seem to update correctly, manually changing the ip address in DNS records results in warnings that the PTR record cannot be created.
So I am wondering if the configuration they currently have setup is correct. What might be stopping some but not all computers from updating, why I can connect to some but not all computers at site "a" but I am not able to remotely connect to any computers at site "b".Why I can do remote installs of Eset Endpoint Security on roughly 10% of the clients but the other 90% fail.
My only options for internet have been 56k or wireless USB modems. That is, until recently. We switched from the wireless USB modems to a wireless hotspot from US Cellular (Samsung SCH-LC11). However, ever since making the switch I've had problems accessing certain websites both on our PC and on my Macbook Pro. I can't connect to Invision Free (or any of its user-created forums) or [URL]. It happens with other, random sites as well. I tried manually changing DNS settings to Google's and another one (don't recall which) and it did allow me to access the site. However, once there, every other site started moving slowly and eventually the ones in question timed out as well.
View 12 Replies View RelatedI built a computer down at school in Utah, semester's over so I went back to Idaho for the summer. When I got here I seemed to stop being able to connect and load content from random sites. It gets a ping time out every time on the same random websites.
Some of the sites:
[URL]
I can access these sites in Utah, so I called my ISP (frontier communications, previously verizon.) They flushed the DNS and checked that the modem wasn't to blame. I checked my host files and they're unaltered. After two hours on the phone they were stumped and hung up. [URL] loads fine, but it won't load the pictures which is odd.I'm not sure if it matters but I do have a 6 year old modem (westell 327w) that I think uses LAN g whereas my mobo (asrock extreme3 gen3) uses Realtek 8111E if i'm looking at the correct specs.one last thing to add would be that I am not able to access [URL], but I am able to access [URL]. Is there something all these websites have in common that cause them not to load?
I am using a USB Modem from HUAWEI Technologies to use internet when im not on a wifi zone.. The Internet Speed is kinda slow (512 kbps), so I configured my browser to go through a proxy to make it a lil bit faster (2mbps now)..Everything works fine except that I couldn't connect to https sites (gmail, facebook, eBay, etc)
View 3 Replies View RelatedMy Toshiba will not connect. I keep getting cannot connect to server messages. Also get the error 623 message. Im not sure what to do. I use Windows xp on it. Bought it in 2006. I had thought about reseting it to factory settings but I never made restore disks and cannot find the toshiba reset stuff.
View 1 Replies View RelatedI am using a USB modem to go online when i'm not in a wifi zone.. The internet speed is very slow (512 kbps) so I configured my browsers to connect via proxy to boost the speed which is now (2 Mbps)..Everythings working fine except that I cannot connect to SSL sites, e.g Gmail, Facebook, Ebay.
View 8 Replies View Related