I'm running a Windows Home Server in my LAN and I would like to use it's functionalities (especially the streaming) features from "anywhere" using the same URL.My router is a Linksys WRT160Nv3 running.I've already setup the necessary port forwardings, as most of the WHS sites run on ports 80 (http) and/or 443 (https) and my isp is blocking all ports < 1024 (I know it suck, but nothing to do about)
View 3 RepliesIs there an iTunes Server for WHS 2011 available?
View 3 Replies View RelatedI recently bought a personal laptop that I'd like to use at work. It came with Windows 7 Home Premium installed and because of that, I can't join it to the Windows Server 2003 domain we have. I don't really need to print or any of the other things that go with being on the domain, I just need access to a few key folders. Is there any way to access shares on the server with Win 7 Home?
View 2 Replies View RelatedI would like to set up a home server, that will sit under the stairs so that it can link to out BT home hub (v3). The idea is then to connect the printer to it, so that we can have both a wireless printer and a central file store for pictures/vids etc.Is XP ok for this? if so, what settings do I need to change/add?Is there any software that I need to make it work?How do I make sure that it is secure for external hacking? As it will contain our personal docs/photos etc and I would hate to use them.
View 1 Replies View RelatedI am looking a way to allow/block certain users to access internet.
View 2 Replies View RelatedI use vmware workstation, and doing small networking project.i use 1 windows server 2008 x64 sp1 as DC, DNS and DHCP with 2 nic(1 nic for local(vmnet2) and 1 for internet(NAT)) and i use 1 windows 7 client machine.in server local nic settings are ip 200.200.200.1 sm 255.255.255.0 gw: empty dns 200.200.200.1
and internet nic settings all set automatic.and in DNS i added forwarder as my company's actual DNS server name.My requirement is client should browse internet by resolving through my dns server.but the problem is my server is having internet but my client windows 7 does not have internet
I am looking at buying the EA6500 router. However, before I make the investment into buying this router, I need to know some basic information first.
1. I want to setup the EA6500 to accept FTP requests to my Windows Home Server. Yes or No?
2. Remote access to the EA6500, Yes or No? i am aware of the security risks
3. I need to setup Port forwarding on the EA6500. I assume I can?
4. Manage a Kindle Fire and other wireless devices?
I have a WES610N in my office connected to a E4200 @ the cable modem in the family room. ~30'.The connection is fine and works well when working.Connected to the WES610N I have:
-Polycom VOIP phone
-HP Mediasmart Windows Home Server
-Desktop
-Multi-Function Laser Printer
I have two issues.
1) The Polycom does a random reboot that I have traced down to it loosing it's IP
2) The Windows Home Server looses it's IP requireing a hard reset.
I have enabled QOS for the polycom and that just worked with managing data. However both devices seem to loose their IP regularly. The desktop might also be having the issue but because it is Vista I suspect Vista is better equipped to deal with IP issues.
I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies View Relatedwireless router doesn't have usb connections. How can I hook up usb external hdd to network at home?
View 1 Replies View RelatedI'm trying to setup my home network so that I can access it when away from home but I've ran into problems and I can't figure out what is causing the problem.I've setup the router to forward incoming requests on port 80 to be directed to my PC running WAMP. The PC has a static IP and if I access it from another PC on my network I get the WAMP page load as expected.I've also setup an account with no-ip.com to resolve my (dynamic) ip. If I use the address they have setup while I'm on my network I get the login page for the router, again this is what I expect.The problem begins when I try and access my home address (whatever.no-ip.biz) from outside my network. I've tried it from 2 different locations and via a dial-up account and I get nothing.
View 6 Replies View RelatedI have setup a webserver on my home PC and I have forwarded port 80 on my router to the IP adress of the PC that is running the web server. The web server is working great; I can get to my web pages from outside of my home by going to http://MyIpAddress/Anyway, the problem is with the Windows Media Player plugin I'm using. I want to embed 6GB MPEG-2 videos into my web pages. I have some videos on my PC and I want to be able to watch them remotely by connecting into my web page. It works fine when I'm at home; other PCs can connect and play the videos no problem. The problem is when I'm at work. When I'm at work, I go to my web page (via my IP address in a web browser) and the Media Player plugin says "Connecting" for a minute, then it says Ready, but the video will not play. I tried using a smaller, AVI file (680 MB) instead to see if the problem was streaming such a large file, but the video still would not play.Do I need to foward more ports on my router so that Windows Media Player can connect back and get the information it needs?
View 4 Replies View RelatedI have a home directory on a linux server and i would like to figure out how can i schedule regular backups/syncs onto an external hard drive on a windows machine.
View 8 Replies View RelatedI have been having a bit of trouble with networking my two machines to share files and allow printing i have a win 7 laptop and a xp home desktop. I share a net connection via 02 wireless box both systems have wireless i have tried many things
View 8 Replies View Relatedget my localhost/ server to be visible to everybody via my external IP.
Things you may need to know:
-I'm running WAMP server, and Apache is installed and running.
-I have no firewall.
-I've forwarded port 80 (HTTP) in my modem and my router configurations. (Netgear WGR614v8 Router & Embarq EQ-660R 660 Series modem)
-I've tried several DNS Hosts, none of them have worked.
-I'm not too sure about the configurations of the WAMP server, though.. here's the file (nothing is edited)
Code:
#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL: for detailed information.
[Code].....
Whats the difference between DNS Server and External IP Address? When I dump Ipconfig /all into a .txt file I see that it shows three seperate values for the DNS Server. My question is, since ipconfig /all does not give an external IP address, are they the same? Why are theyre three?
View 2 Replies View Relatedi have just bought an external hard disk which i want to use as an ftp server. my internet connection setup at home is like so. I have a standard wireless router that my isp provides, and a wireless router(TPLink tl-wr1043nd). When i first connected the HDD to my tplink router, i had successfully made an ftp server, but just for local access. Now i cannot get how i can make my ftp server externally(access it from outside my LAN).
View 6 Replies View RelatedWe once had a virtual server with two network adapters, one was internal and the other was external, and people could access it directly from the internet.
That server recently, died (someone put the .VHD file on a massive RAID 0 array, and that went boom), and I need to set it back up again. All the DNS entries appear to still be there, but how to assign the external IP to the network adapter. I tried Google, but my Google-fu must be weak today as I can't find anything useful.
It's a Server 2008 R2 machine running inside Hyper-V. Nothing's changed except for the new Windows install, it's running with the exact same VM settings, which I didn't touch except to add a new VHD.
My IP adress has always been external. About 2 years ago, after reinstalling my windows,(I am using and used before reinstalling windows7) my IP adress started to work as it wouldn't be external. I couldn't host servers and stuff like that anymore.I tried turning off firewall, few other tricks but nothing changed.When I look information about my IP adress ,most of the sites see it as external.Also, when I call my interned providers, they tell me that they see my adress as external.
Some details :
-Internet is provided by a cable (not using telephone, TV or something else from those internet dealers)
-I am alone using this internet, no one else is connected to it.
We have a business case where we have a group of ASA 5505's in 3 locations with anyconnect user licensing on all 3 for redundancy.The problem we are facing is that when we need to authenticate our anyconnect clients we use active directory servers located at site 1 and the other 2 sites need to contact these MS AD Servers over an already connected VPN tunnel to site 1 (IPSec l2l) but cannot.So the layout is as follows:Site 1 (houses AD servers) has l2l tunnels to site 2 and 3Site 2 (any connect essentials enabled) has l2l tunnel to site 1 and 3Site 3 (any connect essentials enabled) has l2l tunnel to site 2 and 3AD servers are ip'd as 10.1.1.11 and 10.1.1.4If I use anyconnect to site 1 it authenticates fine - as expected.Site 2 and site 3 fails to contact AD serverAny thoughts on how we can accomplish this(or is it even possible to do?) without exposing the AD server in a DMZ or via external ip?
View 1 Replies View RelatedI have a Cisco ASA5505 and windows DHCP server, how do I add this external server to ASA so my PC clients can get DHCP from this server?
View 3 Replies View RelatedHow do you configure a external FTP Server for Cisco NCS 1.1? I only get setup username/password, i also need to setup FTP server IP and directory.
View 1 Replies View RelatedHow to take auto running configuration backup when use commit command in asr9k .Our asr9k sofware Version 4.0.1[Default] .I usse the commands
ftp client password encrypted 050D121F345F4B1B4
ftp client username cisco
ftp client source-interface GigabitEthernet0/0/0/14
ftp client anonymous-password cisco
(Password information changed)
configuration commit auto-save filename ftp://10.10.10.3/ASR9K/asr_conf But auto backup not happening .following errror showing after every COMMIT command.
( Error:Couldn't save file /ftp://10.10.10.3/ASR9k/asr_conf.
Error:'CfgMgr' detected the 'warning' condition 'Operation is temporarily suspended.' )
Manually I able to take Running-configuration backup through ftp int same lacation (ftp://10.10.10.3/ASR9K/asr_conf ) .But automatically not happening .
I would like to know whether LMS 4.1 (local server mode) has the ability to relay syslog messages received from devices to an external syslog server? If so, how do I configure such?
From reading the document and going through the LMS 4.1 GUI, it appears that it could receive and forward messages but only between LMS system (ie. multi server mode) as SSL is required.
I'm running a windows lan that connects 3 computers and a shared storage external hard drive. The whole network, including the external hard drive is connected by ethernet back to my adsl modem/router. I want to convert the external hard drive into an ftp server to enable secure file sharing on the internet by allowing remote access (for the purpose of downloading files) to anyone that I offer a username and password to.The external hard drive is a Western Digital World Edition (blue light)I believe it's a 2008 model.The adsl modem/router is a Billion Bipac 7300(G) RA.Is this doable?
View 3 Replies View RelatedI have an FWSM running in multiple context mode running 3.2(18) code. I have 3 urls that I would like to block so I can't justify the cost of an external URL filtering server. I have found a way to filter individual URLs on the ASA but the same configuration does not seem to be available on the FWSM. At least not on my code. Any way to do this other than resolving the hostnames and blocking the current IP addresses?
View 1 Replies View RelatedI am biulding a wireless network with 5508 WLC and trying to use ISE as radius server and also to redirect the web-login to it.I was trying to understand that to achieve the external web-login, do i need to use the raduius-nac option under advanced on the guest wireless where i am trying this out. and if not, where do i actually use it?So far what i have understood that i do need to have preauth ACL on the Layer 3 security, but the issue is there is no hit reaching the ISE.
View 9 Replies View RelatedI have 3 external ips from my isp:
222.222.222.221
222.222.222.222
222.222.222.223
The first one I use to provide internet access to my office. The other two I'm going to use for the following: I'm going to deploy a server in internal network which must have 2 external ips on his network interface (& one internal ip on the second,but that's ok: I cannot put an extra network switch before asa & plug this server there: this server is virtual & is on esxi host in internal network. External ips must be assigned to servers' interfacw,bot just forwarded there (ms direct access requirement).
My current config:
!
ASA Version 8.4(3)
!
hostname msk-office
[Code]....
Just updated to the 1.01 firmware on my DIR-815 and now it doesn't handle loopbacks anymore.
For instance, I have a dyndns address of ericnewton76.dyndns.org. This points to my router. Works fine if you're NOT within the router's internal network, ie, outside hosts can get in just fine (try it... http:// , you'll see an IIS7 welcome screen)
However, when INSIDE the network, the requests don't get connected properly, and they used to... ie, I work with code, so my svn repo is at ericnewton76.dyndns.org/svn but inside my network it doesn't connect properly anymore (whereas it used to before firmware update)
So now I wish I could back-peddle to 1.0 firmware.
I have a Linksys WRT350N which I am trying to use an app on my iPhone to connect to my server using the public/external IP of my cable modem. I have the necessary ports opened and also tried adding the server to the DMZ but no matter what I can not get the app to connect to my server via my external IP when I am on my WiFi. I can connect without any problems if I use the NATed IP on the server when my phone is connected to the WiFi. It also works fine connecting to the external IP if I am on any other WiFi or the cellular network (which shows ports are forwarded correctly). I just can't connect to the server when I use the external IP and I am on my WiFi network. This is annoying as I need to keep changing the app's settings back and forth between the external and internal IP whenever I am home or away. I am left thinking this is some kind of issue with the WRT350N not allowing local internal traffic to reach the external IP. Any way to resolve this, maybe by entering a static route?
View 2 Replies View RelatedI have a 4402 (version 7.0.235) working with 10 units of 1121 APs connected to it. The WLC is not configured to work in LAG mode. Physical portt #1 is connected to the Main Switch (trunk). I have 3 WLAN mapped to 3 Different VLAN and Everything (security and internal, external DHCP) is working swell...Now- I have connected Physical port #2 directly to an ADSL Router (giga port), Configured Port 2 as untaggedwith the proper IP details.I have configured this interface to receive DHCP from the ADSL Router and for some reason, Clients are not getting addresses.When I assign a Static address to my laptop I get internet access and all is nice. I tried configuring The WLC internal DHCP server (instead of the ADSL router) and that didn't work. It seems like a DHCP problem but I dont understand the source of the problem of think of the solution.When turning off the proxy settings I noticed that it worked. Is there anything to do with that? The problem was that after a while the other WLANs starting causing DHCP issues as well.
View 7 Replies View RelatedI have a hosted web server that has a website on it that needs to connect back to a database within our internal network. We have a Cisco WRVS4400N Wireless Router with 2 VLANS. VLAN 1 goes to a Watchguard Firebox which is connected to our internal network. VLAN 2 goues to our classroom network.
Our database is on VLAN 1. I have opened port 1433 on the Watchguard to allow SQL traffic from our Web Server. I can telnet from my workstation on VLAN 1 to the Web Server over port 1433, so I know the Web Server is not blocking anything. When I try to telnet from the Web Server to our Public IP address over port 1433, it fails.
I believe I have the firewall on the Cisco WRVS4400N off, so it shouldn't be blocking any traffic, but for the life of me I can't get this to work. I have been working on this for two days, and I NEED it to work. This was working up until last week, then it quit working. I am the only person making changes to our network, and there were no changes made during that time.
I follow step by step the link bellow to configure web-auth with external RADIUS server but I receive a error on console debug of the WLC "Returning AAA Error No Server (-7) for mobile"My Radius Server is fine, because I can authenticate on WLC Web page with RADIUS user. WLC 4402 version 4.1.171.0 [URL]
View 2 Replies View Related