Wireless :: WL-5460AP V2 Setting An Access Point

Feb 17, 2011

I have WL-5460AP v2 access point so my question is how do i need to set my access point(which mode) so i can receive connection from an open wireless conection (router) and share it wirelessly with the Access point simply said i want to extend the connection here are the modes that the AP has url...do i need UNIVERSAL REPEATER mode or else?

View 1 Replies


ADVERTISEMENT

Setting Up A Wireless Access Point?

May 29, 2011

I have a slightly confusing set up on my home network and can't figure out how to set up a wireless access point. Here is my setup:I have an Apple airport extreme N set up in the main house. We also have a converted garage in the back yard that is barely within the range of the main router. I have an ethernet cable running from the router in the main house to the back house. I then have that plugged into a switch, which then feeds ethernet to several components. The wireless signal in the back house is very weak, which can be frustrating, so I wanted to set up a separate wireless network in the back. I have an Apple airport express that I am currently using to stream music to a home theater in the back house and would love to use that as a wireless access point. It is hooked up to the switch. I also have a Netgear N router that I could possible use as an access point as well. The problem that I am having is with IP address assignment. I would guess that this is because the main router assigns IP addresses and then the switch also assigns IP addresses

View 1 Replies View Related

Setting Up Windows XP Desktop As Wireless Access Point?

Jan 30, 2012

I have set up a home network some time ago, using a 4-port wired router. All four ports are in use, one of which by my own desktop computer running Windows XP Home, SP3.I recently received a new laptop running Windows 7 Home Premium (64 bit). Because I can't afford a wireless router at the moment, I've been trying to set up my Windows XP computer as a wireless access point (using a Wireless LAN PCI card), so I can connect my laptop to it and share my internet connection.However, when I try to set up an ad hoc network on my XP computer, it doesn't show up in the list of available networks on my laptop, though it does show up on the XP computer, with the message that it's waiting for other computers to join.The same thing happens the other way around. When I try setting up an ad hoc network on my laptop, it doesn't show up on my desktop computer.

View 3 Replies View Related

Linksys Access Point :: WAP54G Ver 3.1 / Setting Up New Wireless AP

Nov 2, 2011

I have never setup an wireless access point before and am having some issues.  I have a Linksys WAP54G ver 3.1.  A friend gave it to me and he said it was working when he pulled it out of his office.I defaulted the device and using the wizard have the following setup:

Setup:
Network:
Device Name - Linksys WAP54G
Configuration Type - Static IP
IP Address: 10.0.0.239
Subnet Mask: 255.255.255.0

[code]....
 
When I try to connect to it via my laptop I get the error: "Windows was unable to connect to XXXXX"

View 1 Replies View Related

Linksys Wireless Router :: Setting Up Access Point With WRT160n?

Sep 19, 2011

I just bought a Linksys E4200 wireless router. I have an old Linksys WRT160N wireless router.  I would like to setup the WRT160N downstairs to wire the DirecTv box and PS3 to it. Then wirelessly connect to the E4200 upstairs where our modem is connected.  Can the WRT160N be used as an access point to do this or do I need other equipment?

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N Setting As Wireless Access Point?

Mar 23, 2013

I have had trouble setting my WAG120N as router.

I am connected to internet via a cable modem, via the LAN cable, I connect cable modem to WAG120N that I want to use as an wireless access point only. And I have got 2 PC, 1 runs on XP, the other on runs on Windows 7. My XP would have no trouble to connect to wireless, but the Win7 can only connect to wireless network, but no internet. When I try the troubleshooting from Win 7, it says, DNS server isnt responding The setting I am using at the moment is Bridged mode only, without entering any values of DNS, IP, etc Is there any setting that work for both OS?

View 1 Replies View Related

Linksys Wireless Router :: Setting Up WRT150 N As Access Point

Jul 27, 2011

I have a small business and IT guy is on vacation for a few weeks.  We have a LAN network as well as a wireless router in the office.  We have one LAN port in our warehouse, but instead of running 200 ft of cable to the area where I need a connection, I wanted to use that port to hook up a WRT150 N Home Router as an access point to set-up wireless downstairs.  I have reset the router, but when I hook it up to a PC downstairs, I cannot even get a LAN internet connection.  I have shut everything down and rebooted, but nothing.  Our main router (WRV54G) is connected to the address 192.168.1.1.  I'm not sure how to install the wireless on the WRT150N if I can't get an internet connection at all, and then how do I change it to an access point.  I need to get this up soon otherwise I would wait for my IT guy to come back. 

View 1 Replies View Related

Cisco Wireless :: Setting Up 1142 Access Point With DHCP

Aug 10, 2011

I am setting up an autonomous 1142 Access Point. The intended goal is to get it accessible though 2 SSIDs:Private: VLAN3 (our internal data VLAN)Guest: VLAN98 (our DMZ/Segregated VLAN)At present, our VLAN3/internal users get DHCP addresses from x2 Windows DHCP servers. Eventually, the DMZ VLAN connections will get their IP addresses from a switch in our DMZ VLAN.At the moment, I am able to authenticate with the Access Point through the VLAN 3 SSID but never get an IP address. I have posted the switch port config below as well as the Access Point config.

View 2 Replies View Related

Cisco Wireless :: Setting Up Embedded Access Point In 1941w ISR

Jun 20, 2010

I've done quite a bit of work with Cisco kit before (it isn't my speciality, however) and am currently working on setting up the embedded Access Point in a Cisco 1941w ISR.
 
The primary router is working fine, but I'm getting no where with the embedded Access Point. The whole IOS within an IOS just doesn't compute for me.
Our requirements are really simple.
 
We have a 10.0.0.0/24 internal network. We want users to be able to access this via the 1941w Wireless Access Point, in the same way that wired users access this via the Ethernet port.
 
The manual re. setting up the AP gives an example where IP addresses are applied to the AP, which doesn't make sense to me, as we simple want the AP to sit on the same VLAN as the ethernet port.
 
How the AP is supposed to interface with the primary router? Also, we want to use a WPA secret key to authenticate to AP. Is this possible? The Cisco docs seem to suggest that WPA is only possible through some 3rd party server.

View 40 Replies View Related

Cisco Wireless :: Setting Up Aironet 1040 Access Point

Mar 13, 2013

I'm working on setting up an Aironet 1040 Wireless Access Point for my company.  It's my first time setting up something like this, and I've run into a bit of trouble.
 
I created my first SSID easily enough, following the manual and guides online.  I set up VLAN 1 as my native VLAN and linked it to my SSID with the encryption and security that I was told to use and it works great.  However, my boss asked me to set up a second connection as well for guests at the office, and this is where my trouble starts.
 
I created VLAN 2, and then another SSID which I linked here.  I set up encryption and security the same way, and I can see the network when I open up my network and sharing manager.  I can connect to the network as well, but I either get a spinning blue icon where my signal strength indicator is or a few bars with a yellow caution sign, and Windows says 'Identifying...'.  I've compared the two SSIDs using the console and the GUI and I can't seem to spot any obvious differences between them.

View 4 Replies View Related

Cisco Wireless :: AP1232AG-E-K9 / Setting Up Access Point To Public Network?

Nov 9, 2012

I want to use one (or two) AP1232AG-E-K9 access points for Internet connection through a public wireless network (BTFON), where wire broadband is not an option. I've downloaded what I think is the correct manual for the APs and I'm now scratching my head as to where and how to start setting them up. I want to use these Cisco APs in the hope they will give me better wireless performance than I'm currently getting, which is frequently flakey. I've tried to reset the APs to the factory default but there seem to be different ways of doing this depending on what you want and what you've got. I made up a console cable  to access the console but there even appear to be different versions of  this so I'm not sure if the cable I have is the correct one. I have setup and used lower end wireless devices in the past but these Cisco units seem real complicated.

View 39 Replies View Related

Linksys Wireless Adapters :: Setting Rate With Access Point On WUSB600N (Windows)

Jun 7, 2011

I need to control the rate at which my WUSB600N adapter connects to my access point. By default, it rate adapts through negotiation with the access point based on a set of possible rates. Can I restrict the set of rates my adapter can use (without re-writing the driver ). I've looked at netsh which provides stats about the rate my adapter is actually using but doesn't appear to allow me to set the desired rate. I'm using Windows Vista by the way.

View 4 Replies View Related

Cisco Wireless :: Aironet AP-1041N Setting To Have Access Point Broadcast Multiple SSIDs

Jan 17, 2013

I have recently purchase Aironet Access Point. I'm pretty new to Cisco systems and what i'm try to do is have the access point broadcast multiple SSIDs lets call them Guest and Admin. My problems is when i config router to have a DHCP address it works perfectly fine but when i assign a static IP it shows all the any connected device as unkown with IP 0.0.0.0. So i'm guessing i will need to setup a dhcp server. Is there a way access point can have its own DHCP server and IP address ( i don't want to use any from my STATIC ip subnet as i dont know alot of empty ones left) like home wifi router where they assign each device an IP like 192.168.0.1. Is this possible?

View 1 Replies View Related

Setting Up USB Access Point

Nov 21, 2012

I bought this gizmo from a Sydney online dealer hoping it would increase the distance I could take my Ipad and iPhone from the modem however I am a little lost setting it up.It is a Blueway UltraSpeed BT-N9500 Super Speed High-Power Wireless Access Point.I have Win 7 Home on the Laptop box I am trying to use it on.It installed the driver okay and says it is ready for use.But that is where I am lost.Should it be attached to the remote unit (Laptop) or the Desktop Win 7 Pro one near the modem/router?

View 2 Replies View Related

Setting Up New DLink Access Point

Jan 3, 2013

I'd like to set up my new d-link access point

View 1 Replies View Related

Setting Up FIOS Access Point

Jun 30, 2012

I have FIOS and a router provided by verizon. they installed it in the basement and the wi-fi range needs to be improved in my house. I have 2 old linksys routers and a netgear DSL modem/router (with "N") that I'd like to use as an access point or range extender. how do I set this up?

View 1 Replies View Related

Setting Up Linksys Router As Access Point?

Mar 21, 2011

i have a verizon usb720 modem. i want to set up my wirless printer. Previously i had this set up by a profesional. I bought a new computer and am now trying to set this up. I have a linksys router as well wrt54g how is tis done. you cannot connect anything to the modem but i have read that you can turn the router into an access point.

View 10 Replies View Related

Setting Up WDS With 638APB And 639GR Access Point?

Mar 3, 2012

Set up a WDS with a TEW-639GR Router and a TEW-638APB Access point. I am aware that I get half throughput when I access the repeater on WDS and that isn't an issue. Its only laptops, ipads, and Vita's that go upstairs to access the internet because they are mobile. I believe I have set up the 639GR correctly and entered in the other devices MAC address in each device. I double checked they were entered in correctly. When I could not get it working with WEP, I have been attempting to do it without encryption just to get it working.

When I am done configuring them, I take the Access point upstairs and plug it in and the signal streangth is much much better upstairs with it, but I get no internet access and the network keeps dropping off. the networks are named the same and they are on the same channel. All the other networks in my small local area were using channels 1-6, so I put down 11. Both are on 11. When I had first purchased the 639GR half a year ago, I found a website that gave you step by step instructions in how to set up WDS specificly for it. I didn't have the access point then because I didn't need it.

View 9 Replies View Related

Setting Up TP Link TL-WR941D Router And Access Point?

Oct 1, 2011

setting up wifi network in my office. my complete set up right now. the main problem is how to setup my access points . Okay so here it is.

I have 3 - 4 PCS in my office out of which My machine is the main machine and everything is setup on this. so for networking what i have done is i am using a TP link router model TL-WR941D. i had got it configured from an engineer. A cable from my internet modem goes into the blue port of this router(WAN) and my PCs are connected via the LAN port of the router . so everything is working fine right now the local network and internet on all PCS and my laptop also connects through the wifi and is able to access other pcs and also the internet.

To have better signal strength on other floors of the building my engineer had installed 2 access points. They are TP link model Tl-WA901ND. yesterday i updated the firmware of my main router and the settings were some how lost but i managed to set it back to working state using the quick setup utility. so my router and wifi is working fine. But now my access points have stopped sworking . i mean i am not able to get better signal strengths thorugh them. i am assuming theirs ettings /ip etc are lost. now i have no idea how to setup these access points to be used again as part of my wifi network. I looked on the internet but nowhere the thing has been explained in detail. how can i configure my access points/repeaters agaain? i am stuck and engineer is not available for nest few days and my officee internet is suffering.

View 13 Replies View Related

F5D7231-4 - Setting Up A Belkin Router As An Access Point

Aug 3, 2011

I have a Belkin High-Speed Mode Wireless G Router F5D7231-4 and I wish to use it as an access point for my main desktop for my wireless network.

I have followed methods supplied by both Belkin and users and have had no success.

Instructions followed:

- Connect a computer to Belkin router using an ethernet cable.

- Reset the router to factory defaults. The reset button can be found at the botton of it. The reset procedure is given below

- Make sure the router is switched ON.

- Locate the reset button(inside a hole) at the back of the router.

- Use a paper clip, push the reset button and hold it for 30 seconds then release the reset button.

- Unplug the Power cable from back of the router and plug it back again and wait for another 30 seconds.

- Log on to router setup page by typing 192.168.2.1 in the address bar of the browser.

- On the left under wireless click on the option Use as Access Point.

- Select Enable and specify the IP address as 192.168.2.254 and subnet mask as 255.255.255.0 and click on apply changes.

Every time the system crashes whilst applying the changes.

View 4 Replies View Related

Linksys Wrt310n - Setting Up Second Router As Access Point

May 26, 2011

My internet provider is telus and they gave me a modem/router combo model VA-G3810bn/tl and another router a linksys wrt310n and i want to by pass the router built into the modem so my linksys will put out a signal instead as it is faster connection any im using windows seven and mozilla firefox if that matters

View 1 Replies View Related

Linksys Access Point :: Setting Up AP2 WAP4410N To Be A Repeater For AP1?

Oct 12, 2011

I have AP1 setup with WPA2-Enterprise.  How would I setup AP2 (WAP4410N) to be a repeater for AP1?

View 1 Replies View Related

Netgear N150 Access Point WN604 Setting Up A Password?

Aug 29, 2012

My son is using the above access point on his laptop. He wants to make the connection secure by having a password that you must enter in order to access it. How does he set up this password? Looked at the user manual; see the screens but don't know how to get to the screen.

View 2 Replies View Related

Belkin Routers :: Setting Up Max N300 As Access Point With USB Drive

Dec 17, 2012

I wanted to set Belkin Share Max n300 as an access point. I followed the instructions, set the IP address to the suggested one and connected it to the main router. It worked, computer connected to the Belkin via wire was getting IP address from DHCP on main router. But: The Belkin device itself became invisible. I lost connection to Belkin device via config page via HTTP. It does not respond to any IP address so I actually cannot use it for purpose I wanted to set up secondary Wi-fi, I just cannot configure it. Also I wanted to use USB ports of the Belkin to connect external drives. I cannot do it as well. More over it does not go back. It does not reset to the original router option.

View 2 Replies View Related

D-link DIR-655 :: Setting Up Access Point / Repeater For Home Network

Jul 21, 2011

I am looking for an equipment recommendation for setting up an access point/repeater for my home network.

I have comcast > surfboard > d-link dir 655 I want to add another router/access point so I can move the dir655 to my office and have my computers connected over gigbait. All my comcast stuff is setup in the living room, and I would like to setup the access point there. Something like

comcast > surfboard > ddwrt n-router (living room) > dir655 (in office) > desktop

View 2 Replies View Related

Cisco :: Setting Up Aironet 3500 Series Access Point

Nov 21, 2012

links with information / guidelines for the initial setup for this Access Point?

View 7 Replies View Related

Cisco Wireless :: 3502p - Access Point Support MESH And Point-to-Point Bridging?

Apr 16, 2013

I need to know if 3502p with outdoor antennas supports Point-to-Point Wireless Bridging?

View 6 Replies View Related

Cisco Wireless :: Point To Point Access Point 1262 Bridging

Feb 27, 2013

How would I bridge a wireless connection with a distance of 400 feet? Would twoAP1262N-A-K9 be able to make this happen? Or is there another wireless bridge that you all can think of?I would be connecting one AP1262 of off a 3750g switch and at the far end (400 ft aproximately) another AP1262N-A-K9.

View 12 Replies View Related

Cisco Wireless :: Upgrading 1042 Access Point To Lightweight Access Point

Apr 20, 2012

I had a new AIR-AP1042N-N-K9 access point and I tried to convert it into lightweight mode with the image c1140-rcvk9w8-tar.124-21a.JA2.tar . I used all the methods but the AP is getting hanged at one position after decompressing the new IOS. The capture of the process is below: [code] After this I am getting the junk characters and everytime AP hangs at this position.

View 4 Replies View Related

Linksys Access Point :: Connect And Configure WAP54G Access Point To New Cable Modem?

Nov 1, 2012

How do I connect and configure my WAP54G wireless access point to my new Cable Modem? I have it connected to the modem but I cannot access it to configure it. It appears to be working but before I got the cable modem I had it connected to a router and it was set-up with a static IP address. With my new ISP, I no longer have a static IP address so I am trying to configure the WAP54G to use DHCP. Trying to access it thru the internet at 192.168.1.245 does not work.

View 1 Replies View Related

Linksys Access Point :: WRT54G - Unable To Find Access Point In Home Network

Aug 29, 2009

I just bought an LG Bluray DVD player (BD390) which is unable to find the access point in my home network.My router is a WRT54G, ver. 2.2, running firmware: Ver.4.21.1.  My home network uses high speed cable with two computers on the wireless network, all working with no problems.The router is on the second floor but the two computers and the new BD390 are on the first floor - about 35 feet away. I have the wirelss security set to none and use only the specific computer MAC addresses to allow connection to this network.
 
I found directions in the forum for a setup using the LG BD390  but with a different Linksys router. I changed the security to WPA (AES); the Beacon interval from 100 to 75; the Fragmentation Threshold from 2346 to 2304; and the RTS Threshold  from 2347 to 2307. The DVD wireless connection still failed to find my network. There is a "Push button" connection feature on the BD390 setup which I tried, but the only "button" on the router I could find was in the basic wireless setting, a green icon for the wireless SSID setup. No connection was made there either.
 
The recommendation connection from the LG manual is for a network cable, but that would be over 50 feet and a real pain to connect, so I would prefer WiFi. 

View 3 Replies View Related

Linksys Access Point :: WAP54G Access Point Setup After A Reset?

Jul 9, 2006

I had to reset my access point but the login screen fails to appear to lock the router.  I don't have the setup wizard disk.

View 9 Replies View Related

Linksys Access Point :: WAP54G Possible To Downgrade Firmware From Access Point

Jan 17, 2013

I have a WAP54g hardware version 1.0.I install de last firmware on this access-point but, this access-point reset automatic after a random time..It’s it possible to downgrade de firmware from this access-point?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved