Linksys Access Point :: Setting Up AP2 WAP4410N To Be A Repeater For AP1?

Oct 12, 2011

I have AP1 setup with WPA2-Enterprise.  How would I setup AP2 (WAP4410N) to be a repeater for AP1?

View 1 Replies


ADVERTISEMENT

Linksys Access Point :: WRT160N And WAP4410N Repeater

Sep 15, 2010

I want to extend the range for a Linksys router WRT160N. I don't have the possibility to use an access point with a wired connection. I read on this forum that can be used WAP4410N configured as repeater, without wired connection. Can someone who has used this solution to confirm that it works? What configuration should be done on the router WRT160N to permit wireless signal to be repeated by WAP4410N?

View 5 Replies View Related

Linksys Access Point :: Settings WAP4410N As Repeater For WRT120N

Jul 19, 2011

I bought my self a WRT120N as my wireless router for my house. and not a long ago i bought the WAP4410N, for my repeater (after i ask to some people).my house were concrete wall, it have about 15-20cm thick, and we try to avoid any wired LAN. The destinaton were unreachable with only WRT120N.it's look like this (what i want for the network on my home) : [code] i already tried to setting the WAP4410 as a wireless WDS repeater, and wireless client/repeater (with and without "Allow wireless stations to associate"). both were unable to connect (limited), although i get the signal. for the IP on the WAP4410N (192.168.0.50), i used static IP [IP, Subnet and Default Gateway were fill in] within the WRT120N range (192.168.0.2 ->192.168.0.51)
 
- how i configure my WAP4410N as a repeater?

- is there any settings that i must set on the WRT120N, before combining the WAP4410N?

View 1 Replies View Related

D-link DIR-655 :: Setting Up Access Point / Repeater For Home Network

Jul 21, 2011

I am looking for an equipment recommendation for setting up an access point/repeater for my home network.

I have comcast > surfboard > d-link dir 655 I want to add another router/access point so I can move the dir655 to my office and have my computers connected over gigbait. All my comcast stuff is setup in the living room, and I would like to setup the access point there. Something like

comcast > surfboard > ddwrt n-router (living room) > dir655 (in office) > desktop

View 2 Replies View Related

Cisco Wireless :: Setting Up Another WAP4410N As Repeater?

Apr 20, 2011

Currently I have a WAP4410N setup and would like to add a second WAP4410N but as wireless repeater. I want my users to have wireless access without the need to keep changing the wireless connection based on their location within the factory.

The AP Mode on teh WAP4410N gives me the options below, but I am not sure which one is the correct one:

Option 1 - Wireless WDS Repeater
Option 2 - Wireless Client/Repeater

Below is the link from cisco with explanation. [URL]

Also, if have WAP54G, can I setup this unit to be a wireless repeater with the WAP4410N devices? or all repeaters must be of the same model? Existing WAP4410 is setup to operate at Wireless B/G Mixed mode.

View 9 Replies View Related

Cisco Wireless :: Setting Up WAP4410n As Repeater

Apr 20, 2011

I need setting up a WAP4410n v 2.0.1.0 as a repeater. Warning, this is the first time I have worked with a repeater. I have tested with a netgear router and a Linksys 160n router. Unfortunately I only have the netgear to continue testing with since the Linksys is at my customer’s site. I can get my hands on a Linksys E3200 if I have to. I have tried a number of setting combinations and I still cannot get the signal to be repeated.  So this is what I think the setup should be:I setup the router and the WAP4410n repeater to have the same ssid and channel. For security I first tried to have both the router and the repeater to use WPA2 personal using TKIP then I read that there is a problem using WPA2 with version 2 of the firmware so I then tried using WEP having both the router and repeater using the same key. I selected Wireless WDS repeater mode. I did a site survey and selected my router. Now from what I understand, which is very little, this is all I should really need to do. I have left all of the other settings to the default values. So what am I missing?

View 1 Replies View Related

Cisco Wireless :: Setting Up WAP4410n V 2.0.1.0 As Repeater?

Apr 30, 2011

Setting up a WAP4410n v 2.0.1.0 as a repeater. Warning, this is the first time I have worked with a repeater. I have tested with a netgear router and a Linksys 160n router. Unfortunately I only have the netgear to continue testing with since the Linksys is at my customer's site. I can get my hands on a Linksys E3200 if I have to. I have tried a number of setting combinations and I still cannot get the signal to be repeated. So this is what I think the setup should be: I setup the router and the WAP4410n repeater to have the same ssid and channel. For security I first tried to have both the router and the repeater to use WPA2 personal using TKIP then I read that there is a problem using WPA2 with version 2 of the firmware so I then tried using WEP having both the router and repeater using the same key. I selected Wireless WDS repeater mode. I did a site survey and selected my router. Now from what I understand, which is very little, this is all I should really need to do. I have left all of the other settings to the default values.

View 2 Replies View Related

Linksys Access Point :: WAP4410n MIBs Or OIDs For Access Point

Jul 3, 2012

I have AP WAP 4410 N, and I want conected AP to cacti. Where is I faoun MIBs or OIDs for my Access Point?

View 1 Replies View Related

Cisco Routers :: Setting Up WAP4410N As Repeater To Extend Signal Of E2500?

Apr 18, 2012

Im having problems with setting up my cisco WAP4410N as a repeater to extend the signal of cisco E2500.It works fine when there is no password to be set on both devices. But when either one of these devices had beenset a password on it, then WAP4410N failed to extend the signal of E2500.
 
I tried steps as below:
 
1. Same password type in WAP4410N and E2500.

2. Different password type in WAP4410N and E2500.

3. Set password in WAP4410N ONLY.

4. Set password in E2500 ONLY.
 
All steps above makes WAP4410N fail to extend the signal range of E2500. WAP4410N successfully works as a repeater to extend the signal of E2500 when there is no password to be set on both devices.

View 2 Replies View Related

Linksys Access Point :: WAP4410N Can't Set It Up

Jul 1, 2012

I need to set up some security cameras here, and the boss has a never used Cisco WAP4410N router. I gotta use my own personal laptop, it's a small netbook, Aspire One DN55E using Windows 7 and Firefox. The network switch is by ZHONE.The wireless accesspoint has green lights on power and wireless, but not on Ethernet or PoE. The switch has power as green, the status blinks green, and co mode is red, everything else is not on. The router is plugged into the first lan plug, I can't plug it in ethernet, as my plugs don't fit. My laptop is connected to the stitch in the secon hole, and the third hole on te switch is connected to the internet. My laptop is receiving wired internet, and it's working well. It's via comcast cable.Now, where it say's 'Configuring the wap4410N Access Point in the book that came with the router, under 'Launching the Web-Based COnfiguration Utility' I seem to from above already accomplished step 1, which is 'Connect your computer to the same network the WAP4410N Access Point is connected to.
 
Yet, in the next step, it says to configure to the same subnet access point.Now..... I've followed all sorts of things requiring me to do stuff with TCP-i4 and 6 in odd little places in my computer, I've typed in on my wireless network password the default access point in the book as well as the default mask, nothing. I went to firefox, and typed it in my browser, nothing- says each time it's taking too long.I can't configure it, the next step says launch firefox, and I can't pull this off, as firefox never finds that default address.This is too hard for something so simple. It shoud be plug in, software pops up on my computer, a quick wizard, and I'm done. It's been a few days, and I am sweating and hot and am thinking about reenacting scenes from terminator 2 at the cisco headquarters.

View 1 Replies View Related

Linksys Access Point :: WAP54G To Use This AP As A Repeater

Mar 7, 2011

I have a WAP54G as my access point, currently it is connected with my BEFSR81 router. I am thinking of changing the access point to a WAP610N for the house. I know that this would work but I was wondering if the WAP54G could be used as a repeater for the outside (I know a lower speed). I know they are two different channels but I wanted a larger range for my wireless. I am on Windows XP, SP2, using Firefox. Can this be done?

View 4 Replies View Related

Linksys Access Point :: WAP4410N Won't Assign IP Addresses?

Dec 18, 2012

I have a Motorola Surfboard Modem connected to a Netgear 24-port switch. I bought the WAP4410N to provide wireless connectivity from the switch. All my PC's can get perfect connectivity via the switch but none of my wireless devices can connect at all. Sometimes I can get 1 PC to connect but what's strange is I can view my networked folders and such but cannot access the internet. I've upgraded the firmware to the latest May-2012. IPv4 and IPv6 are both set to automatic.

View 1 Replies View Related

Linksys Access Point :: Add Repeater To E2000 System?

Mar 31, 2011

I need to extend the wireless range over what I have using an E2000. Can I use a WAP610N in repeater mode? If not can I use a WAP54G knowing that there will be a performance loss? Is there another option to add additional coverage to the existing wireless network?

View 2 Replies View Related

WLR 4000 - How To Use A Linksys Wireless G Access Point As A Repeater / Extender

Aug 10, 2011

I have a Sitecom WLR 4000 wireless router. I also have a Linksys Wireless G Accespoint. Can I use that AP as a extender/repeater for the Sitecom router? If yes, how to configure one and other?

View 4 Replies View Related

Linksys Wireless Router :: Using An E2000 As Repeater / Access Point?

Aug 3, 2011

We have a wireless network and would like to extend the range for it and I was told that a E2000 could be setup to extend the range.If we say that our existing wireless network has the SSID network1, can the E2000 be setup so that it is connected to a LAN socket and then wok as a wireless runter with the same SSID (network1) so that pc's can connect easily ?Or must the two wireless routers be connected with a dedicated cable ?Or must I setup the new E2000 up as a new wireless network with a new SSID like network2 ?

View 3 Replies View Related

Linksys Access Point :: How To Setup Wap54g As Repeater To WRT54GL

Jun 25, 2011

I have WRT54GL and want to setup wap54g as wireless repeater? I need to expand the signal using wap54g

View 1 Replies View Related

Linksys Access Point :: WAP4410N - Internet Connection Always Connect And Disconnect

Aug 18, 2011

I have a new notebook Sony Z217GG, I connected WAP 4400N was very smooth, but after connected WAP 4410N, the internet connecting always connect and disconnect, I check the notebook wireless model is intel 6230.

View 1 Replies View Related

Linksys Access Point :: WAP54g Repeater Showing As Device But Is Not Connected

Jan 28, 2012

I have a WAP54g set up as a repeater. It even shows in the WRT54g device list (Tomato firmware) as a WDS interface but nothing can connect to it. I have the repeater's MAC address in the AP and it's set to "Access Point + WDS" mode. I don't know what I could be doing wrong. Is it a conflict of DHCP on the AP vs static on the repeater?

View 1 Replies View Related

Linksys Wireless Router :: E2000 - Configuring Second One As Repeater Access Point

May 28, 2011

I just purchased 2 E2000 routers at BB and was assured the second one could be configured as a repeater access point. Some current messages indicate this is not possible.Will a Cisco moderator please confirm and clarify repeater options.

View 2 Replies View Related

Linksys Wireless Router :: Configure Access Point As Repeater For 2.4 GHz Band On WRT610N?

Jun 22, 2010

I'm very dissatisfied with the range and signal strength of my new WRT610N dual band router compared to the WAP54G Access Point I used before.Can I configure the Access Point as a repeater for the 2.4 GHz band on the WRT610N if I use the WRT610N as a Wireless G router rather than wireless N? 

View 5 Replies View Related

Linksys Access Point :: X3000 And WAP200 - Can't Adjust Wireless Repeater Mode

Feb 7, 2013

Bought wap200. I can't adjust the wireless repeater mode. Linksys x3000 supports wap200? What settings need to be made?

View 4 Replies View Related

Linksys Access Point :: Connect WRT54GL Router To Repeater To Establish WLAN Bridgde

Aug 27, 2012

I got an Fritz Box from my new Provider to connect to the internet using Fiber To Home. the box is now im my living room and also acts as an WLAN Router. I would like to configure my WRT54GL which in located in my office from a router to a repeater to establish a WLAN bridgde.

View 3 Replies View Related

Setting Up Linksys Router As Access Point?

Mar 21, 2011

i have a verizon usb720 modem. i want to set up my wirless printer. Previously i had this set up by a profesional. I bought a new computer and am now trying to set this up. I have a linksys router as well wrt54g how is tis done. you cannot connect anything to the modem but i have read that you can turn the router into an access point.

View 10 Replies View Related

Linksys Wrt310n - Setting Up Second Router As Access Point

May 26, 2011

My internet provider is telus and they gave me a modem/router combo model VA-G3810bn/tl and another router a linksys wrt310n and i want to by pass the router built into the modem so my linksys will put out a signal instead as it is faster connection any im using windows seven and mozilla firefox if that matters

View 1 Replies View Related

Linksys Access Point :: WAP54G Ver 3.1 / Setting Up New Wireless AP

Nov 2, 2011

I have never setup an wireless access point before and am having some issues.  I have a Linksys WAP54G ver 3.1.  A friend gave it to me and he said it was working when he pulled it out of his office.I defaulted the device and using the wizard have the following setup:

Setup:
Network:
Device Name - Linksys WAP54G
Configuration Type - Static IP
IP Address: 10.0.0.239
Subnet Mask: 255.255.255.0

[code]....
 
When I try to connect to it via my laptop I get the error: "Windows was unable to connect to XXXXX"

View 1 Replies View Related

Linksys Wireless Router :: Setting Up Access Point With WRT160n?

Sep 19, 2011

I just bought a Linksys E4200 wireless router. I have an old Linksys WRT160N wireless router.  I would like to setup the WRT160N downstairs to wire the DirecTv box and PS3 to it. Then wirelessly connect to the E4200 upstairs where our modem is connected.  Can the WRT160N be used as an access point to do this or do I need other equipment?

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N Setting As Wireless Access Point?

Mar 23, 2013

I have had trouble setting my WAG120N as router.

I am connected to internet via a cable modem, via the LAN cable, I connect cable modem to WAG120N that I want to use as an wireless access point only. And I have got 2 PC, 1 runs on XP, the other on runs on Windows 7. My XP would have no trouble to connect to wireless, but the Win7 can only connect to wireless network, but no internet. When I try the troubleshooting from Win 7, it says, DNS server isnt responding The setting I am using at the moment is Bridged mode only, without entering any values of DNS, IP, etc Is there any setting that work for both OS?

View 1 Replies View Related

Linksys Wireless Router :: Setting Up WRT150 N As Access Point

Jul 27, 2011

I have a small business and IT guy is on vacation for a few weeks.  We have a LAN network as well as a wireless router in the office.  We have one LAN port in our warehouse, but instead of running 200 ft of cable to the area where I need a connection, I wanted to use that port to hook up a WRT150 N Home Router as an access point to set-up wireless downstairs.  I have reset the router, but when I hook it up to a PC downstairs, I cannot even get a LAN internet connection.  I have shut everything down and rebooted, but nothing.  Our main router (WRV54G) is connected to the address 192.168.1.1.  I'm not sure how to install the wireless on the WRT150N if I can't get an internet connection at all, and then how do I change it to an access point.  I need to get this up soon otherwise I would wait for my IT guy to come back. 

View 1 Replies View Related

Linksys Wireless Router :: Does Cisco WAP4410N Wireless-N Access Point Support PPPoE

Feb 21, 2013

Does Cisco WAP4410N Wireless-N Access Point support PPPoE ?If yes how can I configure the PPPoE conexion?

View 1 Replies View Related

Cisco Wireless :: Does WAP4410N Work As Repeater For Linksys E4200

Jun 15, 2011

Does Cisco WAP4410N work as repeater for Linksys E4200 ?i have Linksys E4200 and I need repeater for it.

View 2 Replies View Related

Linksys Wireless Adapters :: Setting Rate With Access Point On WUSB600N (Windows)

Jun 7, 2011

I need to control the rate at which my WUSB600N adapter connects to my access point. By default, it rate adapts through negotiation with the access point based on a set of possible rates. Can I restrict the set of rates my adapter can use (without re-writing the driver ). I've looked at netsh which provides stats about the rate my adapter is actually using but doesn't appear to allow me to set the desired rate. I'm using Windows Vista by the way.

View 4 Replies View Related

Connecting Tp-link Wa901nd Access Point As Repeater Without Access To Router

Oct 21, 2012

I have just moved into a new apartment that has a free wifi connection the problem is that my apartment is in the basement at the completly opposite side of the office and i cant get a strong enough signal to connect to the internet and im not very good with computers. the first time i tride setting up the repeater i was able to connect everything and get online but it had changed the ssid and when i tride to change it bacck to its origanil name i lost my internet connection and have not been able to get access the internet again.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: AMD Duron(tm) processor, x86 Family 6 Model 8 Stepping 1
Processor Count: 1
RAM: 479 Mb
Graphics Card: S3 Graphics ProSavageDDR (Microsoft Corporation), 32 Mb
Hard Drives: C: Total - 24385 MB, Free - 3678 MB; D: Total - 13776 MB, Free - 13649 MB;
Motherboard: , KM266-8235
Antivirus: None

View 3 Replies View Related

Wireless :: Access Point Or Repeater?

Oct 20, 2011

I have a fairly large home (>5000 sq ft) with multiple levels and some "dead spots" in the extreme areas. I would like to have a fantastic wi-fi signal through the home for access to my home network for my family and internet for guests. I have Fios with a 50/20 mpm with a "g" router. I also have purchased 2 repeaters (ampedwireless.com) and installed 1. Recognizing that it appears to have created a different network, so this isn't what I want to do. Then I went back and purchased 2 access points. I need to have an "hardware solution" in my theater (basement) as well as in my bedroom (3rd floor).

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved