Wireless Internet Not Working On One Laptop - Default Gateway Not Showing?
Oct 7, 2012Wireless is working on one laptop but not the other. Default gateway not showing when running command prompt, ipconfig /all
View 5 Replies
ADVERTISEMENT
Unable To Connect To The Internet From Laptop / Default Gateway Unavailable
Jul 14, 2011I'm unable to connect to the internet from my laptop. When I do a diagnostic test it tells me that the default gateway is not available. I've tried resetting it, resetting my IP address via command prompt, restarting the router, etc.
View 10 Replies View RelatedInternet Stopped Working On Gateway W322 Laptop?
Aug 7, 2011I have an old Gateway W322 laptop running Windows XP Home Edition and it recently stopped being able to connect to the internet. It happened gradually, at first having connection problems off and on for a few hours, and eventually it would no longer connect at all. I tried using an ethernet cable to the modem and that didn't work. I also know it's not my modem because I have other computers in my house and they are connecting just fine.
View 7 Replies View RelatedDell :: Inspiron N5110 Laptop / Wireless-N 1030 Card - Default Gateway Not Available
May 24, 2012I own an Inspiron n5110 laptop(Dell) with an Intel(R) Centrino(R) Wireless-N 1030 wireless card. I use Windows 7 Ultimate 64-bit. I constantly drop internet connection, mainly when downloading and playing games. In the right bottom corner, where my wireless connection signal strenght is showed, I get an yellow triangle with '!' mark in it saying 'Limited access'. When troubleshooting, the only way to get an internet connection again, I get an message 'The default gateway is not available' and it says that it's fixed. after awhile I lose internet connection again and everything repeats. I figured out that it's not from my router or Internet Service Provider. I saw in the forums the option to exchange this card for the 6230 upgraded version but that is not a variant for me because in my country the technicians can at very damage the laptop.
View 7 Replies View RelatedDefault Gateway Is Unavailable For Laptop
Jan 15, 2013I've been trying to connect to the internet all day. Every time it connects, but only with limited connectivity. I run troubleshooting, but it doesn't fix the problem. Sometimes it won't have anything to report back other times it says that the default gateway is unavailable. My laptop is the only device in our home that won't connect, so I don't think it's the router.I think the router is a cisco router, there is a cisco box mounted on the ceiling with a cord leading into it (I don't have access to any buttons though)I live in an apartment building with free internet, so I'm not sure who the provider is.
View 11 Replies View RelatedLenovo Laptop / Default Gateway Is Not Available
Mar 8, 2013I'm having trouble keeping my lenovo laptop (running windows 8) connected to the internet. I have been able to connect successfully to multiple wireless networks and access the internet until I tried to connect to the new network.Initially everything is OK - I can connect to the network and access the internet. However after a short period of time (anywhere from a few seconds to 20 minutes) the network connection will change to limited, without internet access. If I simply disconnect and reconnect to the network the internet will immediately be working again (at least for a few seconds/minutes)alternatively, if I run the troubleshooter, I always get the message that the default gateway is not available, which has been fixed by resetting the wi-fi adapter.
View 5 Replies View RelatedToshiba Laptop - Default Gateway Is Unavailable?
Apr 26, 2012I am having issues on my Toshiba laptop... that started late March for about five days then went back to the way it should be. Then it acted up again. The wireless keeps going out, just on mine and my cousin (hers is a compaq along with the other cousin but the other cousin, doesn't have an issue... just me and this little cousin and I don't know why.Its been now happening for a few days. Then I notice it work at night...could it be possible hack?
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II P340 Dual-Core Processor, AMD64 Family 16 Model 6 Stepping 3
Processor Count: 2
RAM: 2810 Mb
Graphics Card: ATI Mobility Radeon HD 4200 Series, 256 Mb
Hard Drives: C: Total - 293442 MB, Free - 222531 MB;
Motherboard: AMD Corp., Guam
Antivirus: Microsoft Security Essentials, Updated and Enabled
Acer Laptop With Windows 7 - Default Gateway Is Not Available
Dec 19, 2011he has the same problem "default gateway is not available" on his Acer laptop with Windows 7, so we were psyched to find this problem posted - and today even (weird?). However, we tried resetting the : netsh winsock reset catalog etc and rebooted but still no internet access.
View 1 Replies View RelatedCannot Hold A Wireless Internet Connection (default Gateway Not Available)
Jan 25, 2012I have a win 7 netbook that I recently got and for some reason it suddenly cannot keep a connection to the internet. It used to keep a connection before but now I keep getting the error the default gateway is not available about every ten minutes while connected which of course is very frustrating.
I've tried updating all associated drivers but apparently that hasn't changed anything. I've tried restarting the computer and tried different connections. I know its nothing to do with the internet connection I'm trying to connect to as other devices are able to keep a connection with no issue.
Linksys Wireless Router :: E1200 Do Not Have Internet Access As Default Gateway
Nov 11, 2011I have my E1200 connected to my Netgear FVS318 router (which is a wired router) and the Netgear is connected to the internet.When a wireless client attempts to connect to the internet after automatically receiving an IP from the E1200, they do not have internet access as the default gateway that gets assigned is the IP of the E1200 192.168.2.100, which is not correct. It should be assigned 192.168.2.1, which is the IP of the Netgear router. Thefore, I have to manually set their IP addresses to use 192.168.2.1. How do you configure the E1200 to assign the correct Default Gateway IP to wireless clients who want to use DHCP?
View 4 Replies View RelatedNo Internet Or Default Gateway
May 8, 2011Basically, I'm using a broadband modem, which appears to be connecting fine, with all the required lights being on. My ISP says that, from their end, everything is perfect. Even my laptop shows Local Area Network as connected.However, for some reason, I am not able to access the internet. I was able to use it till last evening, but suddenly the internet stopped working. On Google Chrome, it says that there is no DNS or something.Subsequently, when I tried to access my modem settings, it shows as 'webpage not available'. I then noticed that there is no default gateway! I was able to access it the day before, but now I can't.
View 10 Replies View RelatedWifi Not Working For Gateway Laptop?
Mar 19, 2011So here is what happened, it started two days ago. I use a wifi connection at work, it's an unsecure wifi and I don't know where it comes from. But I am able to get on here at work and do stuff... two days ago I tried and it let me on like normal, but then I couldn't get on websites, it said local access only... so I was like mmm that's odd and the little CD looking thing wasn't there it was just two computers on the bottom right hand corner of the screen. So I restarted after attempting a few times... same problem, finally after a while it let me online but it was very slow and kept kicking me off. When I would try to reconnect sometimes it wouldn't let me and it would give me the option to diagnose the problem or try a new network, I'd move around and finally get on.
I restored back to a day when it was working fine, I did a disc clean up, I used my CCleaner, I defragged my laptop. Still the same problem, my laptop is a Gateway computer running on Windows Vista... so today at first my wifi wouldn't work unless I was standing and holding it... which I found the higher in the air the better it stays connected it seems sometimes.I chatted with gateway and they gave me a few links to download which failed to download once they got to like 30% or so, so I am all out of options I downloaded the wifi link here Download free driver for notebook Gateway ML3109 (Windows 7, XP, Vista) - DriverPack Solutio since that is my laptop
No Internet Access Across PPTP / No Default Gateway
Jun 6, 2012I am trying to set up a PPTP VPN connection which also provides internet access. I have the following configuration. The router named "Router1" connects 2 computers PC1 and PC2 on the LAN side with a network address of 192.168.1.0/24. It is a PPTP server and a DHCP server. It gives IP addresses to PC1 and PC2. It has a static address of 192.169.1.2 on the LAN side and a static address of 10.2.9.1 on the WAN Side. PC3 has a static address of 10.2.9.2 and is connected to the WAN port of Router1. "Router2" is connected to the LAN side of Router1 and it has a static IP of 192.168.1.1. Router2 is connected to the internet and provides internet connection to PC1 and PC2. PC1 and PC2 connects fine to the internet and can see each other. However, PC3 cannot connect to the internet even though it is connected to Router1 by PPTP VPN connection. PC3 can see PC1, PC2, Router1 and Router2 but it cannot connect to the internet because Router1 does not give it the default gateway(192.168.1.1) to connect it. When PC3 connects via PPTP, It receives a correct IP address(10.2.9.3), correct DNS addresses but the ip4 default gateway field is left blank, and the DHCP option is not enabled on connection properties of PC3. Router1 is a DD-WRT firmware router (DLink Dir 400) and has PPTP server enabled as a service. How do I get Router 1 to give PC3 a default gateway IP? And how do I forward all outgoing packets from Router 1 to Router 2? I do not need port forwarding for some ports, I need full access to the internet from PC3 though the PPTP connection via Router2.
View 3 Replies View RelatedInternet Works Intermittently - Default Gateway Is Not Available
Jul 11, 2012The internet on my laptop only works intermittently. After a minute or so of initial use, it stops working and when I run the troubleshooter it discovers that the default gateway is not available, and then it says that it has fixed the problem. However, after only a minute or so more, the internet once again fails. I have tried the "run>cmd>enter>ipcongfig>enter" and found that the numbers for the default gateway are the same on my laptop as for a laptop that does work.
View 2 Replies View RelatedNo Internet Access And Default Gateway Is Missing
Jun 18, 2011I have a pocket wifi which allows you to connect up to five devices. my mum, sister and my phone can access it no problems but my laptop wont work.what will happen is:
- it connects automatically to the wifi
- but it has a little error mark on it
- and it says theres no internet access.
ive tried everything, ive ran several windows network diagnostics and it says the problem is the default gateway being unavailable.
DNA-A211-I / Connected To The Internet But Default Gateway Is Blank?
Apr 11, 2012i want to find out my router ip address, but when i go to cmd & run ipconfig my default gateway shows blank. i want the router ip in order to access my CCTV footage through the internet. my router/modem is BSNL Broadband model no DNA-A211-I. i can however connect to the internet without any problems. just want to find out my router ip address.
View 11 Replies View Related2WIRE 2701HGV-E No Default Gateway Or Connection To Internet?
Oct 4, 2011im having a problem with my 2701hgv -e. I connected it to my laptop and I tried to enter the settings of the router but was unable to do so. but when I ran the ipconfig command, there was no default gateway. I tried to press the reset button but nothing happened.
View 4 Replies View RelatedHome Network :: No Internet Access Across PPTP / Default Gateway?
Jun 6, 2012I am trying to set up a PPTP VPN connection which also provides internet access. I have the following configuration. The router named "Router1" connects 2 computers PC1 and PC2 on the LAN side with a network address of 192.168.1.0/24. It is a PPTP server and a DHCP server. It gives IP addresses to PC1 and PC2. It has a static address of 192.169.1.2 on the LAN side and a static address of 10.2.9.1 on the WAN Side. PC3 has a static address of 10.2.9.2 and is connected to the WAN port of Router1. "Router2" is connected to the LAN side of Router1 and it has a static IP of 192.168.1.1. Router2 is connected to the internet and provides internet connection to PC1 and PC2. PC1 and PC2 connects fine to the internet and can see each other. However, PC3 cannot connect to the internet even though it is connected to Router1 by PPTP VPN connection. PC3 can see PC1, PC2, Router1 and Router2 but it cannot connect to the internet because Router1 does not give it the default gateway(192.168.1.1) to connect it.
When PC3 connects via PPTP, It receives a correct IP address(10.2.9.3), correct DNS addresses but the ip4 default gateway field is left blank, and the DHCP option is not enabled on connection properties of PC3. Router1 is a DD-WRT firmware router (DLink Dir 400) and has PPTP server enabled as a service. How do I get Router 1 to give PC3 a default gateway IP? And how do I forward all outgoing packets from Router 1 to Router 2? I do not need portforwarding for some ports, I need full access to the internet from PC3 though the PPTP connection via Router2
Linksys Wireless Router :: E4200 V1 - Laptop Connects But Showing No Internet Access
Apr 8, 2012I am experiencing connectivity issues with the wireless part for several weeks. The laptop connects to it, but it shows me that it does not have internet access.I also have a belkin router that I also use. So, when I have the connectivity issues, I connect to the other router. When I use the Cisco Connect application, it goes on for a couple of minutes and then gives the message "If you are not connected to my router SSID name you can't update your router settings".
View 1 Replies View RelatedCisco Wireless :: 1042 - New AP Not Showing In Default Group?
Apr 25, 2013I got a new 1042 AP and connected it to the network. I have a 2504 contrller with 6 AP's already on it. I thought I could just plu in the new AP and it would show up in the AP group. Instead it shows up as a rouge AP. How do i get the new AP to show up in the default group?
View 24 Replies View RelatedDefault Gateway Is Not Available With Wireless Network Adapter
Dec 1, 2012My computer will only run on ethernet cable, the network can be found but only connects for a second, connects to the internet in and out, it gives the error, default gateway is not available, or problem with the wireless network adapter. The manufacturer is HP
Windows IP Configuration
Host Name . . . . . . . . . . . . : Owner-HP
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : cogeco.net
[code]...
Wireless Repeater Setup - No Default Gateway
Dec 2, 2012So i am trying to Set up a wireless repeater so i can have a better signal in my back yard but i could not set the configurations for my repeater because the gateway (ip address? Not really sure what it is called) would not work when i entered it into the browser. So i went into command prompt to make sure i had the right gateway and it did not even exist.
View 6 Replies View RelatedWireless Connection Keeps Dropping - Default Gateway Is Not Available?
Jan 22, 2012My wireless connection keeps dropping. It tells me the default gateway is not available.I have tried to check and do the things told here first but not working have tried to do the driver update . I have a realtek driver, there is no update available for it.I have a 25 mbit connection i barely get 1 mbit.Extremely slow The laptop is running windows 7 .Also i already did all the TCP/IP stack repair options like winsock reset etc.The antivirus i am running is ESET Nod32 version 4 i think .I have attached a xirrus wifi inspector photo if u want to look at it.[CODE]
View 5 Replies View RelatedWireless Hardware Disabled - Default Gateway Is Not Available?
Jul 28, 2011I cannot connect to the internet on my laptop using wireless. It was working fine for a while and it just stopped. This is not the first time this has happened. Although i cannot remember if i caused it to start working again. My laptop wireless hardware has disabled itself. I've tried enabling/disabling and troubleshooting from what i know how to do but its still not working. This problem started yesterday.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU T4300 @ 2.10GHz, Intel64 Family 6 Model
[Code].....
Gateway Laptop Won't Connect To Internet
Mar 13, 2011Laptop has been connecting to internet for years. Originally using wireless Linksys router but wireless card in laptop stopped working. Have been connecting via Ethernet connection for over a year. All of a sudden, cannot connect to internet via Ethernet connection. Laptop connects fine using wireless mobile card (Verizon) with 75.x.x.x address.Using same Ethernet connection,another laptop connects fine (69.x.x.x address)Network status on "broken" laptop shows "Unidentified Network Access: Local Only Ethernet adapter has 169.x.x.x address when connected to cable modem (Roadrunner) with no default gateway.Tried to release/renew IP but get message "The requested operation requires elevation." I am running under admin account.
Sys Info:
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft� Windows Vista� Home Premium , 32 bit
Processor: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 2037 Mb
Graphics Card: Mobile Intel(R) 965 Express Chipset Family, 448 Mb
Hard Drives: C: Total - 227412 MB, Free - 101980 MB; D: Total - 11060 MB, Free - 4533 MB;
Motherboard: Gateway, , Rev1.91.18, V7CBMYY60722CE706X
Antivirus: None
Linksys Wireless Router :: Default Gateway 0.0.0.0 With WRT54GX2
Nov 9, 2011I have a WRT54GX2 router and my laptop is connected wirelessly to the router. It worked fine before but now, the connection is only local, it's not connected to the internet.On the router, it says: Default Gateway: 0.0.0.0.I think that it should say 192.168.1.1 instead.I tried dhcp release and renew but it didn't work.The firmware version is 1.01.22.
View 3 Replies View RelatedLinksys Wireless Router :: E900 - Default Gateway Not Available
Sep 16, 2012I am currently using an E900 wireless router. The router is on the second story so I have to use a wireless router booster to enhance the signal strength. I have been using the booster for well over a month with no issues whatsoever; however, tonight I attempt to get onto World of Warcraft and I keep getting disconnected every 5 minutes. After I run the diagnostic it fixes the problem and says that the "default gateway not available". I tried restarting the router, restarting the booster, unplugging the wireless adapter, checked the firewall, and also restarted my computer.
View 2 Replies View RelatedCisco Wireless :: 1310 Bridge Default Gateway
Jan 11, 2012In bridged network environment. We have a pair of Cisco 1310 bridges configued betweeen 2 buildings the config on each is simple one as a root bridge the other as non root no spanning tree is running and source route learning is turned off. We had both on in the past. One side of the network has a link out to the internet. About 3 -4 times a day the IP address on the default gateway becomes unreachable i.e cant be pinged. Only a reboot of one or other of the bridges corrects the issue. This happens only during the day when the netwrok is in use. When this happens everything inside the network works fine and everybody can see everybody else. The ISP can see intot eh network and can ping our devices but we cannot see out of the network.
View 0 Replies View RelatedCisco Wireless :: 2811 - Can't Ping Default Gateway
Jun 9, 2012I'm trying to get a 2811 router with a NM-AIR-WLC6 Wireless Controller Module to work with an c1200 series access point. The LWAP is connected to a 2690 switch which has a trunk connected to the router. My configuration looks very similar to example 2 on this page: [URL] . The LWAP does get an IP from the DHCP pool on the router. I can also connect to the GUI of the controller from a PC on VLAN 250 (which also is connected to the switch).
[URL]
The moment I join my Wireless network I get no IP and when I enter a valid static IP, I still can't ping the gateway. I also noticed that the controller could ping the gateway before I configured the interface. After configuring an interface with that gateway, the controller loses the ability to ping to it. I can't seem to figure out why. I've been working all week on getting this controller and LWAP to broadcast a fully working network.
Wireless Internet Not Working On HP G60 Laptop?
Dec 26, 2011I have 2 desktops at home and a HP G60 notebook with windows Vista. The internet works fine on both desktop since they're plugged via Ethernet, but my wireless connection is giving me a hard time on my laptop. I know the wireless works cause I have 2 iphones and they're connected via wifi and works fine. It's just this laptop that is having problems. when I click on connect to wireless, it does but it doesn't show the proper "connected" icon (when it's connected it shows two monitors and a small world, now it's just the two monitors without the world)
View 1 Replies View RelatedWindows 7 Gateway Laptop Won't Connect To Internet
Mar 10, 2013I just reinstalled my windows 7 OS and now my gateway laptop won't connect to the internet. In the network and sharing center there is a x between my computer and internet. I have a westell versalink model 327w and all the other devices in my house can connect except my laptop
View 5 Replies View RelatedBypass The Gateway Laptop Internet Switch?
Aug 23, 2012On my Gateway laptop there was a switch on the left side. It turned the internet access on or off. The switch broke off, and now I cannot access my wireless internet, I have to be corded.Can I turn off the switch within the computer so I can access my wi-fi?
View 1 Replies View RelatedTP-Link ADSL2+ Wireless :: TD-8968 Does Not Find Default Gateway?
Jan 5, 2013Region : SpainModel : TD-W8968Hardware Version : V1Firmware Version : got an ADSL connection with Movistar Spain, static IP. When I configure the TD-8968 all works well, it syncs but does not connect to internet. When I diagnose the connection the modem pass tests at ATm level but is not able to find the default gateway. I got another modem (the one to be substituted with the 8968) that it works with the configuration I am triying to use. Is there some step I am missing or is the modem faulty?
View 1 Replies View Related