Wireless Repeater Setup - No Default Gateway

Dec 2, 2012

So i am trying to Set up a wireless repeater so i can have a better signal in my back yard but i could not set the configurations for my repeater because the gateway (ip address? Not really sure what it is called) would not work when i entered it into the browser. So i went into command prompt to make sure i had the right gateway and it did not even exist.

View 6 Replies


ADVERTISEMENT

Default Gateway Is Not Available With Wireless Network Adapter

Dec 1, 2012

My computer will only run on ethernet cable, the network can be found but only connects for a second, connects to the internet in and out, it gives the error, default gateway is not available, or problem with the wireless network adapter. The manufacturer is HP

Windows IP Configuration

Host Name . . . . . . . . . . . . : Owner-HP
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : cogeco.net

[code]...

View 3 Replies View Related

Wireless Connection Keeps Dropping - Default Gateway Is Not Available?

Jan 22, 2012

My wireless connection keeps dropping. It tells me the default gateway is not available.I have tried to check and do the things told here first but not working have tried to do the driver update . I have a realtek driver, there is no update available for it.I have a 25 mbit connection i barely get 1 mbit.Extremely slow The laptop is running windows 7 .Also i already did all the TCP/IP stack repair options like winsock reset etc.The antivirus i am running is ESET Nod32 version 4 i think .I have attached a xirrus wifi inspector photo if u want to look at it.[CODE]

View 5 Replies View Related

Wireless Hardware Disabled - Default Gateway Is Not Available?

Jul 28, 2011

I cannot connect to the internet on my laptop using wireless. It was working fine for a while and it just stopped. This is not the first time this has happened. Although i cannot remember if i caused it to start working again. My laptop wireless hardware has disabled itself. I've tried enabling/disabling and troubleshooting from what i know how to do but its still not working. This problem started yesterday.

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU T4300 @ 2.10GHz, Intel64 Family 6 Model

[Code].....

View 12 Replies View Related

Cannot Hold A Wireless Internet Connection (default Gateway Not Available)

Jan 25, 2012

I have a win 7 netbook that I recently got and for some reason it suddenly cannot keep a connection to the internet. It used to keep a connection before but now I keep getting the error the default gateway is not available about every ten minutes while connected which of course is very frustrating.

I've tried updating all associated drivers but apparently that hasn't changed anything. I've tried restarting the computer and tried different connections. I know its nothing to do with the internet connection I'm trying to connect to as other devices are able to keep a connection with no issue.

View 1 Replies View Related

Linksys Wireless Router :: Default Gateway 0.0.0.0 With WRT54GX2

Nov 9, 2011

I have a WRT54GX2 router and my laptop is connected wirelessly to the router. It worked fine before but now, the connection is only local, it's not connected to the internet.On the router, it says: Default Gateway: 0.0.0.0.I think that it should say 192.168.1.1 instead.I tried dhcp release and renew but it didn't work.The firmware version is 1.01.22.

View 3 Replies View Related

Linksys Wireless Router :: E900 - Default Gateway Not Available

Sep 16, 2012

I am currently using an E900 wireless router. The router is on the second story so I have to use a wireless router booster to enhance the signal strength. I have been using the booster for well over a month with no issues whatsoever; however, tonight I attempt to get onto World of Warcraft and I keep getting disconnected every 5 minutes. After I run the diagnostic it fixes the problem and says that the "default gateway not available". I tried restarting the router, restarting the booster, unplugging the wireless adapter, checked the firewall, and also restarted my computer.

View 2 Replies View Related

Cisco Wireless :: 1310 Bridge Default Gateway

Jan 11, 2012

In  bridged network environment. We have a pair of Cisco 1310 bridges configued betweeen 2 buildings the config on each is simple one as a root bridge the other as non root no spanning tree is running and source route learning is turned off. We had both on in the past. One side of the network has a link out to the internet. About 3 -4 times a day the IP address on the default gateway becomes unreachable i.e cant be pinged. Only a reboot of one or other of the bridges corrects the issue. This happens only during the day when the netwrok is in use. When this happens everything inside the network works fine and everybody can see everybody else. The ISP can see intot eh network and can ping our devices but we cannot see out of the network.

View 0 Replies View Related

Cisco Wireless :: 2811 - Can't Ping Default Gateway

Jun 9, 2012

I'm trying to get a 2811 router with a NM-AIR-WLC6 Wireless Controller Module to work with an c1200 series access point. The LWAP is connected to a 2690 switch which has a trunk connected to the router. My configuration looks very similar to example 2 on this page: [URL] . The LWAP does get an IP from the DHCP pool on the router. I can also connect to the GUI of the controller from a PC on VLAN 250 (which also is connected to the switch).
 
[URL]
 
The moment I join my Wireless network I get no IP and when I enter a valid static IP, I still can't ping the gateway. I also noticed that the controller could ping the gateway before I configured the interface. After configuring an interface with that gateway, the controller loses the ability to ping to it. I can't seem to figure out why. I've been working all week on getting this controller and LWAP to broadcast a fully working network.

View 3 Replies View Related

Linksys Wired Router :: RV042 / Setup A Vpn Gateway To Gateway

Apr 6, 2013

i am trying to setup a vpn Gateway To Gateway  when i setup the vpn i can ping  the 2 rv042 i cant see any computer in the network places when there comect we need to see the computer in the network places so are pos will run?

View 1 Replies View Related

Cisco Routers :: RV8082 Setup A VPN Tunnel With Gateway-to-Gateway

Apr 8, 2012

I have two Cisco RV8082 Routers which I would like to setup a VPN Tunnel with Gateway to Gateway.  One location is a static IP Address.  The other location is a dynamic IP address.

View 2 Replies View Related

Setup Wireless Repeater Using Awus036h?

Oct 25, 2011

how do you setup a wireless repeater using a awus036h. Or is it even a option?

View 1 Replies View Related

Wireless Internet Not Working On One Laptop - Default Gateway Not Showing?

Oct 7, 2012

Wireless is working on one laptop but not the other. Default gateway not showing when running command prompt, ipconfig /all

View 5 Replies View Related

TP-Link ADSL2+ Wireless :: TD-8968 Does Not Find Default Gateway?

Jan 5, 2013

Region : SpainModel : TD-W8968Hardware Version : V1Firmware Version : got an ADSL connection with Movistar Spain, static IP. When I configure the TD-8968 all works well, it syncs but does not connect to internet. When I diagnose the connection the modem pass tests at ATm level but is not able to find the default gateway. I got another modem (the one to be substituted with the 8968) that it works with the configuration I am triying to use. Is there some step I am missing or is the modem faulty?

View 1 Replies View Related

Linksys Wireless Router :: E4200 - L2TP Default Gateway?

Jul 22, 2012

How can I change default gateway and DNS's for L2TP type of connection? I've tried to specify them in static IP address first and then switched to L2TP as adviced in one forum, but it didn't work. I don't understand why such settings as Gateway and DNS servers cann't be specified as for PPTP connection. Firmware is 2.0.37.

View 1 Replies View Related

Cisco Wireless :: 5500 - Default Gateway ARP Lookup Failed

Aug 31, 2012

On a 5500 series WLC I see I have an issue where peap clients get randomly disconnected with these errors
 
MAX_EAPOL_KEY_RETRANS: 1x_ptsm.c:444 Max EAPOL-key M1 retransmissions exceeded for client 24:77:03:35:79:34
 
AAA-6-ARP_LOOKUP_FAIL: radius_db.c:3232 Default gateway arp lookup failed.
aaaQueueReader: Aug 31 19:12:14.938: %AAA-4-RADIUSMSG_SEND_FAILED: radius_db.c:3567 Unable to send RADIUS message to

View 7 Replies View Related

Cisco VPN :: WRVS4400N VPN IPsec Gateway To Gateway Setup?

Jan 29, 2012

Just bought 3 WRVS4400N, I wanted to setup gateway to gateway VPN.  I followed the instructions on the WRVS4400N admin guide and VPN does not connect.  I also downloaded the VPN setup wizard and that also did get the gateway connected.  Everything seems to be correct.  Do I have to enable anything else?  Firewall setting?
 
Below is my config.
 
IPSec VPN Tunnel: Enabled
Tunnel Name: TUN01 
Local Security gateway: IP only
WAN1 IP: 192.168.100.1
SUBNET: 255.255.255.0
Local Security type: subnet
LOCAL IP: 10.10.10.1
SUBNET: 255.255.255.0

[code]....

View 1 Replies View Related

Cisco Wireless :: Setup WAP200 As A Repeater?

Oct 31, 2010

I have a Cisco WAP200 Wireless-G Access Point - PoE/Rangebooster with the latest firmware 2.0.2.4-ETSI?I’m trying to set it up as a repeater, repeating the wireless signal from a Cisco 877W.I have configured the WAP200 with the same SSID, WPA key, and channel as the 877W.
 
I have changed the WAP200’s AP Mode setting to Repeater, and picked up the 877W’s MAC Address.The WAP200 is broadcasting and I can connect to the wireless network, but I don’t get DHCP. It’s almost like it’s still in Access Point mode.

View 3 Replies View Related

Wireless Connection Briefly Drops Then Will Not Grant Default Gateway Or DNS Server

Aug 28, 2011

I can connect to the internet via wireless just fine, and everything will be hunky-dory for a while. After a while, however (this varies anywhere from a day to a week), there will be a small hiccup on the connection, and then something fails in the Acquiring Network Address stage. My computers will get an IP, but they will not get the default gateway or DNS server.I have tried a plethora of fixes, from simple computer reboots to fiddling with all sorts of settings, and nothing works to reestablish the connection. My father has also tried fixing it, to no avail. I have to go and reset my router, which also interrupts TV service, because it is through AT&T U-Verse. Needless to say, this does not make other people in the household very happy, and I really shouldn't have to be resetting my router every couple of days like that. My PC uses a Netgear WG111v3 adapter and is Windows XP. My laptop has on-board Wifi and is Windows XP Professional.

View 2 Replies View Related

Linksys Wireless Router :: WRT54g2 Handing Out Wrong Default Gateway

Jan 19, 2012

I'd like to add a WRT54g2 to my LAN. I'd like it to communicate with my existing LAN router, and not to talk directly to the LAN. Therefore, in Basic Setup, I don't have the top part (Internet Setup) configured. Is that a mistake?But, it seems that when I enable DHCP, it hands out its own IP as gateway, and then doesn't seem to send the traffic on upstream. When I configure clients manually with the real router IP, they work fine.
 
So, I'd like, I guess, Linksys to forward traffic on a static route to real router. How do I do this? Adding a route to real router yields the error, "maybe default route already exists."

View 4 Replies View Related

Linksys Wireless Router :: Can't Set Default Gateway On WRT310N In Access Point

Jul 28, 2011

I am using a WRT310N.  I have a Cisco ASA5505 as my firewall and don't need the routing capabilities of the WRT310N.  So I just plug the LAN port on the WRT310N directly to my LAN switch.  I just need the WRT310N to have an IP address for management.  So I configure the LAN with an IP address, but there is no way to set the default gateway on the LAN.  You can only set the default gateway on the WAN interface, which I don't use, since I am using this in an AP only type of configuration.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G Version 2 Weird Default Gateway

Nov 21, 2012

We were hit by hurricane Sandy a couple weeks ago and lost power for a week and a half. Now that our cable has been restored I noticed that the wireless internet wasn't working. The wired internet works fine to this computer but no Wi-fi.I think the problem is the routers default gateway. It's supposed to be 192.168.1.1 but right now it's 24.191.112.1 .So far I have tried:

-Powercycling everything
-ipconfig/ flush DNS
-ipconfig/ release and ipconfig/renew
-Checking all the wires are pugged in fine (They are).

View 1 Replies View Related

Linksys Wireless Router :: E1200 Do Not Have Internet Access As Default Gateway

Nov 11, 2011

I have my E1200 connected to my Netgear FVS318 router (which is a wired router) and the Netgear is connected to the internet.When a wireless client attempts to connect to the internet after automatically receiving an IP from the E1200, they do not have internet access as the default gateway that gets assigned is the IP of the E1200 192.168.2.100, which is not correct. It should be assigned 192.168.2.1, which is the IP of the Netgear router. Thefore, I have to manually set their IP addresses to use 192.168.2.1. How do you configure the E1200 to assign the correct Default Gateway IP to wireless clients who want to use DHCP?

View 4 Replies View Related

Linksys Wireless Router :: E4200 Setup As Repeater?

Jan 25, 2012

I use my e2000 as router and want to use the e4200 as repeater. so if i connect wireless to my e4200 i can see all my devices also the one on the e2000. How to setup the e42000 ?

View 5 Replies View Related

Cisco Wireless :: WAP200 Repeater Mode Setup?

Oct 19, 2010

I have 3 WAP200 wireless-G access points. I have one set up as an AP the other two are set up as repeaters to the main AP.
 
My question is Do I need a lan connection to each repeater ?
 
also, do I need to create SSIDs for all three? & if so, do they need to be the same?

View 7 Replies View Related

Cisco Wireless :: Can The Aironet 1310 Setup As A Repeater

Jul 10, 2012

Can the Aironet 1310 setup as a repeater? I could not make the AP as the repeater associated to another 1310 ap. This AP is running LADAP.

View 11 Replies View Related

Dell :: Inspiron N5110 Laptop / Wireless-N 1030 Card - Default Gateway Not Available

May 24, 2012

I own an Inspiron n5110 laptop(Dell) with an Intel(R) Centrino(R) Wireless-N 1030 wireless card. I use Windows 7 Ultimate 64-bit. I constantly drop internet connection, mainly when downloading and playing games. In the right bottom corner, where my wireless connection signal strenght is showed, I get an yellow triangle with '!' mark in it saying 'Limited access'. When troubleshooting, the only way to get an internet connection again, I get an message 'The default gateway is not available' and it says that it's fixed. after awhile I lose internet connection again and everything repeats. I figured out that it's not from my router or Internet Service Provider. I saw in the forums the option to exchange this card for the 6230 upgraded version but that is not a variant for me because in my country the technicians can at very damage the laptop.

View 7 Replies View Related

Cisco Wireless :: 4095 With 3560 Clients Cannot Ping Default Gateway When Connected To SSID

May 21, 2013

My controller is vWLC installed in ESXi which has to vNet Cards configured with all vlans(4095), then it is connected to a 3560 switch with trunk. The configuration of the switch interface is as belows: The SSID is BYOD and I can connect the SSID and get the IP address such as 10.10.10.118/24, but for now, i cannot ping 10.10.10.1, but i can ping 10.10.10.90.

View 3 Replies View Related

The Default Gateway Is Not Available?

Feb 21, 2013

i joined because i keep on having the same problem. i read around the forum a bit before joining and i saw that mcafee was causing the problem for a lot of people. i dont have mcafee so that cant be it several crashes per day. like, literally close to 100 of them.

View 3 Replies View Related

Default Gateway Not Available

May 3, 2012

Periodically, I drop internet everywhere around my college's campus. I'm literally four feet from a router, but it doesn't seem to matter. I'll disconnect, run troubleshooter, and I'll get the error message saying that the default gateway is not available. My college is designed for Macs, but I'm running Windows 7. My Mac colleagues do not experience problems. The computer works at home and at nearly every other wireless network I've brought it in range of. Specifically, either IBM or Dell.

Dell XPS 15
i7-2720QM
8gb Ram
Windows 7 Home Premium SP 1
540? Something around 500 Nvidia graphics card

Ipconfig results:

Windows IP Configuration
Host Name . . . . . . . . . . . . : George-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No

[code].....

View 14 Replies View Related

Default Gateway Is Not Available?

Nov 30, 2011

I recently got a new laptop and ever since, the internet goes in and out. Most of the time it is not out long enough to display the no connectivity icon or stop music from streaming but it is noticeable. When I run the troubleshooter it says that the default gateway is unavailable. I tried manually setting the connection information but the same thing keeps happening except the troubleshooter then says that DHCP is not enabled. I've disabled every firewall I can find and updated all the drivers available. Here is my info:[CODE]

View 3 Replies View Related

No Default Gateway When Hardwired?

Jan 3, 2011

When I plug my laptop up to our modem, all i get is local access. IPconfig gives me to default gateway or dns suffix. Naturally there is no wireless. My roomates laptop runs fine wired or not and we have the same set up.Not sure what to do.

View 12 Replies View Related

Default Gateway Came Up Empty

Feb 8, 2013

I am having issues playing certain games on my ps3. So I've been searching for solutions and I came across a video that wanted me to go to run/cmd/ipconfig. I have little knowledge of computers but I'm not sure that what my ipconfig is showing is supposed to be there. At first I googled and learned about ipv6 addresses because i found that weird but i think that checks out fine. I then googled about the weird numbers and letters in my default gateway and came up empty. Is there a reason thats there?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved