I'm using Hamachi to connect two computers long distance, but Computer B is unable to open the folder I need on Computer A.Basically I use a program (A point of sale) and it has to update the version on Computer B from computer A, and also has to write client files -on- Computer A... So I'm trying to network them together in order for it to do this.
View 2 RepliesI have a server connected to my router with a CAT5. I usually manage the server from my laptop connected to the router via WLAN. I often need to add files to a public folder on the server so it can be dowloaded by my clients when they need them. I can access my personal laptop from the server, but I cannot access the server's files from my laptop. This is recent and used to work fine. I also cannot acces other personal computers on my network that I often connect to
View 11 Replies View RelatedI have a VoIP application that I'm trying to run over the PPTP VPN tunnel on a RV120W router.
The system is a NEC SV8100 PBX communicating with the NEC soft phone (SP310). The system uses SIP to set up the call and for other signaling information. It uses RTP to transmit/receive the audio stream.
The problem I'm having is that there is no audio stream from the soft phone. The SIP communication and the audio stream to the soft phone works fine. The symptom is: from the soft phone, the remote party cannot hear you, but you can hear them.
I did a packet trace on the RV120W and found the following:
No.TimeSourceDest.ProtocolInfo9489.358957
192.168.1.252
192.168.1.52
[Code].....
As you can see, the Source IP address is being changed from its original 192.168.1.52 to 192.168.1.1. The NEC PBX is expecting the packet to be coming from the softphone, (192.168.1.52) not the RV120W (192.168.1.1). As a result it ignores the RTP packet from the soft phone and does not relay it to the remote party.
Is there any reason why the RV120W is performing NAT on PPTP packets? Can this be disabled somehow?
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :
I've connected a usb hard drive to my TD-W8968 and shared the root folder via storage sharing.When I try to copy files to the hard drive from my computer the transfer speed it about 700 Kbytes/s. When reading from the drive to the computer I get 2000 Kbytes/s.This is way below the 30000Kbytes/s that can be delivered to/from the drive when it's connected to the computer's usb. I've tried several usb drives and for all I get the same results.Is there a way to increase the read/write speeds for the usb connected devices?
I just setup a VPN server on my home pc w/ XP pro, and a VPN client connection on my laptop w/ WIN7. I'd tried to connected the vpn server and it connected successfully. However, I wonder how i can access my server (or my files on it) when Im away from home? I kinda know it is something about web browse access.
View 3 Replies View RelatedI am installing Window Server 2008 with file Services, and I am making my clients to save files to their documents folder but those files are being saved straight in the Server. I was wondering if It is better to save files direct to the server or save files in each client?
View 2 Replies View RelatedI have a client who has the Asus NAS on their network with a 2TB hard drive in it. And what i would like to to as a backup solutikn for them, is log on to the ftp server on the NAS and then download all of their files on a daily basis.
View 3 Replies View RelatedRecently I've changed my all local I.P. series in the server from 192.168..to 10.219..& the server 2008 providing through DHCP.So, I've to re mapped the share folder to change the path in every system.But few files in 1 PC are still keeps the old share folder path when trying to open & failing or taking long time! NOT all files in that machine
View 1 Replies View RelatedI have a server with two adapters: 192.168.1.200 and 10.99.1.200, 10.99.1.200 connects to a cisco router 10.99.1.254 (which I have no access to). This connects via WAN to another network to transfer files to another company. 192.168.1.200 is connected to our local LAN. I have a service that uses FTP to get and send files to a server through 10.99.1.200. I recently had to switch our IP scheme from 10.99 to 192.168 and since then haven't been able to send files to the ftp server. My question is, would a router solve my problem? If so, would I; remove the 10.99 adapter, connect 192.168 to the router, connect the router to the switch, connect the 10.99 gateway to the new router (and update any appropriate routing tables on the server)? The service appears to have issues with using a dual homed server and updating it isn't going to happen anytime soon.
View 3 Replies View RelatedThere are no IT employees at my small company and everyone else has started coming to me with their computer issues. Normally it's fairly straight-forward, but I've never come across this one before.We've got a computer that's connected to the network and has internet access, but cannot access the network drive like the other computers can.The shared drive is found under computer --> network location.The operating system is Windows 7.I've tried disconnecting from the network and reconnecting, and mapping the network drive.
View 1 Replies View RelatedI have three pier to pier computers (two Win 7, one XP). I have a new server on the way (HP Mediasmart EX495 with Window Home Server). What is the best way to gather all the files from the three machines and move them to the server and eliminate dedundancy? Is there an efficient and recommended procedure, or should I just block out a few days and hunker down for the big task...
View 4 Replies View RelatedI have an issue that I'm not quite sure how to deal with. I had a media server die on me, so I built another one. It is built on Asrock A75 pro4 mobo. I am using the built in lan adapter from the mobo Realtek RTL8111E. At first I had a problem when no other PC could download anything from shares from the server. I could browse the files just fine, but when I tried download anything It would not start for a while and sometimes it would show speed of 16kb/s or something like that and would not budge after that. I re installed the driver did system restore and that partially solved the problem. Now all the pc's except one can download files fine. It is thru wireless network (server is connected with cable to router tho). The media server is running win7 ultimate the laptop that can't download the files is running vista. I tried using different wireless adapters with laptop and standing right by the router and it still wouldn't work. My old server ran also win7 and I had no problems transferring anything from it. I have another pc that runs vista and it doesn't have any issues. Internet works fine on that laptop and also it can download files from other pc's on network fine. The router I'm using is linksys e3000, though i don't think it has anything to do with the problem.
Actually the other pc's can't transfer anything either as of right now, so I would have assume the server is the issue
How can I install cache server for caching downloaded files ?I try use Squid for it.but it's not working properly.Squid can caching downloaded files when download the file without Download Managers.(Like IDM)When I use a Download Manager , Squid can't cache the downloaded file. ( Max connections number in IDM = 16) How can I cache downloaded file , when download file with IDM and multi connection mode (max connections number = 16 or 8 )
View 1 Replies View RelatedHave a server linked to four computers and a laptop for a business and can't seem to access shared files on server from other computers as it keeps asking for username and password to access it. Have tried to change from workgroup to domain that the server is on so to create username and password but error message keeps coming up 'a domain controller for the domain ata.local could not be contacted or if just use ata as domain it does not accept any username or password. Also have tried suggestions in other forums such as simple sharing and creating an account on other pc's with same username and password as server. All of the systems are windows xp and the server is windows standard.
View 3 Replies View Relatedi have a linux server PC and its containing videos, tutorials etc. but my Question how can i play that video files in my browser like you tube??? now its working like non-streaming, jus download and play through any player like!!but my purpose is play videos throgh firefox browser..
View 1 Replies View RelatedI want to centralize our files which my colleagues access frequntly in the office?For this purpose, I am using and old laptop dedicated for this job. Nowadays I am thinking of achizition of a server. But I dont know If I buy a new server, this will provide me with some performance and security in plus?Should I really replaceour old laptop with a new server?
View 8 Replies View RelatedWhen I try and copy files from my Windows 7 Home PC to my Windows Server 2003 share, it copies so much then hangs the Server sharing. It then appears that the share has disappeared. If I copy from the Server 2003 to 7, it copies fine, and copying from XP to 2003 also works fine. I had a chat with a colleague who told me that he has the same problem copying from Vista to XP.
View 1 Replies View RelatedHow can I install cache server for caching downloaded files ?
I try use Squid for it.but it's not working properly.Squid can caching downloaded files when download the file without Download Managers.(Like IDM)When I use a Download Manager , Squid can't cache the downloaded file. ( Max connections number in IDM = 16) How can I cache downloaded file , when download file with IDM and multi connection mode (max connections number = 16 or 8)
Here's what I need to do. I have a file server at work that I need to be able to allow our employees to access the files when they are traveling. I know the server's ip address and know how to port forward and how to share certain folders thru windows, but this is all new territory for me.
View 2 Replies View RelatedWe've recently installed Windows Server 2003 at our small office for data storage, and have set up shared folders in the Win Server 2K3 for access from about a dozen Win XP Pro machines.Upon the first access of these shared folders from a Win XP Pro machine, we're required to enter a User Name & Password for the Win Server 2K3 machine:Is there a work-around for this? Perhaps some method in WinXP Pro to save the username/password? As it stands now, any time one of the WinXP Pro machines gets rebooted, or if the server gets rebooted, users of the Win XP Pro machines have to re-enter the username/password, and I'd like to find if there's away around having to re-enter that info.
View 5 Replies View RelatedRegion : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
I have set up the router with a USB FAT32 Stick 8gb shared six folders with about 5gb of music inside the server only streams the first folder to the network and inside that folder all the MP3 files and another 2 sub folders but not others. Whats the reason for this is there a limit to the amount of files that can be shared if so this should be made clear in your
Region : Romania
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
The Media Server feature is quite nice to have but the fact that it is limited to 100 files is a joke. I have a 2TB drive pugged into this router's USB port with hundreds of video files and even more mp3s. Is there any chance that in a future firmware this limit to be removed or at least increased to say 1000?
Network error code 0x80070035 The network path was not found.
I read the previous posts on this error code but my sceanrio was not addressed. Dell Optiplex 980 i5-750 2.66GHz w/4GB RAM running 64bit Win7Pro SP1 and 64bit Symantec Enterprise Protection v.11.0.630
File server is Dell PowerEdge 1900 running 64bit Win 2008 standard server w/o hyper-v, SP2 and 64bit Symantec Enterprise Protection v.11.0.630
I support an OU in a large university domain. Myself and one other user are the only people experiencing this issue in an OU comprised of over 20 machines.
I just installed this router and connected the hard drive (Western Digital 1TB) which worked fine at first. When I moved some movie files to another folder they lost all of their data. The file names are still present, but all the media files show zero bytes and are no longer usable. Is there anyway to get these files back? I have been digitizing all our movies to the tune of about 90GB. What could be going on here? I disconnected the HD from the router and plugged directly into the laptop. Still shows the file names, but each file is still at zero bytes. Not a cool way to have a media server for your house!
View 6 Replies View RelatedRegion : Spain
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP :
I've recently bought the TP-LINK WDR3600 and am very happy with it. I'm using its media server feature so I can watch movies on my TV through DLNA, but have found a problem: the MP4 files are not shown. All the other files work perfectly (AVI, MKV), but the MP4 files are not shown in Windows Media Player or LG Smart TV. I assume the Media Server software simply does not include this kind of files when scanning. Is there any way of accessing the media server configuration file and "enable" MP4 files?
I've rolled back my E4200 router to the old firmware 1.0.0.1, then set up a media server.It generally works (e.g. it streams pre-existing media files to other devices). I can copy to this external drive small (say, < 1 MB) files. The drive has enough free space. However, I cannot copy to this external drive large (e.g. 700 MB) files.
View 5 Replies View RelatedI decided to play around a little more with the media server feature... I've succeeded in getting SOMETHING consistent out of the 1.0.02 firmware. It's not 100% useful.
Here's what I did - whether it's pertinent, who knows:
1) I made the Media Server "Name" completely unique. My router's name was "Penguin" and that seemed to proliferate throughout the settings on the router everywhere (SMB server name, FTP, Media Server, etc.). I decided to just call the media server "Server." I then checked the option to DISABLE the server, and saved settings.
2) With the Media Server OFF, browse to the share on the USB drive, and completely delete the T wonky folder.
3) On the Media Server page of the router config, add your media sources.
4) Enable the Media Server, save, and you'll then see the T wonky folder come back, and if you go into that folder, you'll see some files being "built."
I tested a few videos and some music with the XBMC media player on my Mac book and a Windows 7 PC. I was able to add music and video sources on my small selection of test music and videos. I was also able to play them. MP3 tags and embedded artwork showed up properly, and the streaming over wireless was very good.
Now... Here's the kicker. This was just a VERY small sample of my entire collection. I had about 5 albums in MP3 format on the drive, and about 10 movies that I personally converted to MP4 with Handbrake (ripped each movie to about 1.4gb). When I threw my entire 90gb music collection on the drive and told it to scan (it, being the router Media Server page), it seemed to populate the albums up to a certain point, and then crashed. I saw the data files in the T wonky folder getting larger for about 5 minutes, then it stopped growing. At that same time, XBMC wasn't able to see any music or videos. Even after turning off the media server, then re-enabling it, I wasn't able to see anything. If I deleted the T wonky folder, and went back to a smaller subset of my collection, it once again worked "reliably."
So, one of several things is happening here.
1) There are certain files the media server cannot properly parse, and it's crashing the services that run it.
2) Something is corrupting the media database files which then prevents it from showing up.
3) There's a maximum number of files or file size that your collection can be.
If only there was a syslog we could get to on the stock firmware... Linksys.
After we have installed patch 5 on several ACS 5.2 server they aren't able anymore to write their backups to the sftp servers. I tried to search on the bug tool kit, but it seems to be broken when searching for the keyword "sftp". It's the same when I try to do a "copy logs" with sftp as destination.running a debug I can see,
acs/admin# copy logs sftp://10.1.115.11/,Collecting logs...,Username: backupuser,Password: ,6 [16376]: transfer: cars_xfer.c[301] [admin]: sftp copy out of /var/tmp/ADElogs.tar.gz requested,6 [16376]: transfer: cars_xfer_util.c[412] [admin]: resolved server to 10.1.115.11,7 [16383]: transfer: sftp_copy.c[75] [daemon]: Executing SFTP command: /usr/bin/scp -o StrictHostKeyChecking=no /var/tmp/ADElogs.tabackupuser@10.1.115.11://ADElogs.tar.gz,% Error: Transfer failed3 [16376]: transfer: sftp_copy.c[230] [admin]: sftp_copy ERROR: command execution failed,3 [16376]: copy: cm_copy.c[1226] [admin]: Logs archive transfer to url sftp://10.1.115.11/ failed retcode=-306,acs/admin#
Region : CzechRepublic
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP :
1. On my laptop in windows vista media player I cant see any shared media of media server TP-WDR3600: screen.jpg
2. My samsung tv shows all three shared folders of media server. When I try to play any Mp3 and avi files it says unsuported file format. In folder with jpg photos it shows nothing. I can see and play anything from my laptop media server on TV.
Region : Germany
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : latest
ISP : Kabel BW Germany
I have HDD (Toshiba 500GB) connected to router by USB and started media sharing. (The HDD is started on USB Sharing) Samsung LED UE40D7090 (2011 model) is successfully connected to network,. I can see TP-Link on my LED network but it appears with blue exclamation mark and if i try to access the released folders with files (i can see the files) with TV shows me a message "unknown file formatt" and i can�t access it. On the PC - I can access video, pictures and mp3 content on USB HDD, problem just with TV. If i connect the HDD direct to TV , TV can play all files.
I have my Win 7 pc networked to my host XP desktop. They see each other. I set them to share. Now when i pick a certain file, in this case on my XP host, I right click it and choose Share and security box. Looking at my Win 7 pc, i do not see it.
View 5 Replies View RelatedHope u all fine and doing well, Everything i donwload at end it's crrupt After download finished when opining files Files Crrupt Error.
View 3 Replies View Relatedhow to share files with two different networks, one networking is in ptcl dsl router, second is in tenda wifi router, so how to enable sharing files with these two networking
View 1 Replies View Related