XP Not Detecting Cisco AE2500 On Any Port?
Feb 13, 2013It will not be detected by the software, and i'm not sure whats wrong. I have tried every single usb port, and my OS is Windows XP SP3.
View 1 RepliesIt will not be detected by the software, and i'm not sure whats wrong. I have tried every single usb port, and my OS is Windows XP SP3.
View 1 Repliesi have a DSL-2730U WIRELESS N 150 ADSL2+ 4-PORT ROUTER which i have been using for the past 2 months.It was working fine,but since the last 5 days when i plug the lan wire into the PC port, nothing happens...it doesn't get recognized..the green light in the port is always glowing..i've tried another cable..same problem...i've tried it on another laptop..it works FINE....
View 1 Replies View Relatedserial modem US robatics 5686G is not detected on windows server on serial port com1. i tried to restart the server . turn the modem on and off disable the com1 port reenable it again . update the firmware of modem on different workstation and connect it back to server ( couse it's working on another workstation so it's not the modem) i really don't know what to do is there a trick for this like in registry or somthing in mouse settings that mouse could actully detected on com1 and don't let the modem to show up on device manager? by the way modem cable is serial cable i tried to change the cable as well non of my ways works?
View 4 Replies View RelatedI have an E4200 and a WD MyBook Essential 2TB. They were working very well for the longest time, detecting a speed of USB 2.0. I had to get a new desk, thus had to disconnect all my devices, including the router. After plugging everything back in, the router only detects USB 1.1, even though the device is clearly USB 2.0.
View 5 Replies View RelatedI have a computer that when I try to connect to internet using the linksys wireless adapter it says local only connection. It has windows vista OS. What can I do to get it to work?
View 2 Replies View RelatedI recently moved into a new apartment and after receiving the code to the wifi that is included I started connecting all my devices. My Xbox 360 connected flawlessly. But my PC simply will not connect, I am running Windows 7 64bit with a Linksys AE2500 wireless adapter.
Quick note: I have checked that IPv4/IPv6 are set to automatically set to obtain IP Addressees and the DNS Server.
I have a Cisco Linksys AE2500 wireless adapter and a Cisco Linksys e2500 wireless router. For the most part I seem to be able to connect to the internet with no problem. But whenever I stream video. to my PS3, my phone, Kindle or when I start using a lot of bandwidth my internet drops and I get the "limited access" message with the yellow <!> symbol. It still shows full bars and excellent connection, yet cant get onto the internet? This happened with my PC at my old house, I forget was I did to fix it though? If it matters though I can connect fine to the internet from my Laptop and my other devices.
View 8 Replies View RelatedI bought a new Linksys AE2500 dual-band wireless-N USB adapter but I misplaced the setup disc. Is there any way I can get another disc or download the setup files and then transfer them to my other computer?
View 1 Replies View RelatedI have a Cisco Linksys AE2500 wireless adapter and a Cisco Linksys e2500 wireless router.
For the most part I seem to be able to connect to the internet with no problem. But whenever I stream video to my PS3, my phone, Kindle or when I start using a lot of bandwidth my internet drops and I get the "limited access" message with the yellow <!> symbol. It still shows full bars and excellent connection, yet cant get onto the internet?This happened with my PC at my old house, I forget was I did to fix it though? If it matters though I can connect fine to the internet from my Laptop and my other devices.
I've recently bought an AE2500 wireless adapter, and I've had problems setting it up, I've checked my port drivers versions and they're all up to date, I have looked over countless websites figuring out why it is doing this, my computer is a Windows Vista, and my last resort is formatting the computer, I've been here for countless hours trying to get this to work, when I run the disk with the adapter, it gets stuck at "Detecting Adapter" and ends up coming up with "Cannot find wireless adapter" or something really close to that. I've tried switching it to all of my USB ports, and nothing is working!
View 5 Replies View RelatedI have a tivo series 2 unit. I have a linksys routert E2500. Can I use an AE2500 wireless adaper with my Tivo?
View 1 Replies View RelatedWhat i have to download and where to download some kind of program that will allow me to run/install this on my MAC. Model: AE2500
View 1 Replies View RelatedI just moved an older Windows XP Desktop /w Service Pack 3 from my parent's house over to mine after having my laptop fail on me. It was previously connected wirelessly at their house with a Microsoft MN-510 wireless adapter. When I got it up and running at my house, it was not picking up any networks with the MN-510. So I picked up a new AE2500 today, thinking that the ancient MN-510 may be the problem. Plugged it in, threw in the disc and voila, it started picking up Networks. The problem is, It is not connecting to my Network. The router is a Motorola SBG901. I have already disabled the security on the router and made sure that the MAC Filtering is disabled, but it is still not connecting. There has been no other issues with connecting any of our other devices.
View 2 Replies View RelatedYesterday I bought a linksys AE2500 usb network adapter. So I set it up on the computer downstairs from the router, roughly 30 ft distance. There is a desktop running a linksys pci card directly next to it. So I fire the computer up it see's the network but it won't connect to it. Then I take the computer up to the room the router is in and it connects. The range on the adapter says 300 ft and I do realize that there are walls and other obstructions that cause that number to fall but I find it hard to believe that the adapter is out of range but I can't think of anything else to explain it.
View 7 Replies View RelatedI bought a AE2500 adapter recently and attempted to install the Cisco Connect software. It gets to the point of connecting the device to the wireless, then crashes. I noticed that as I plugged the device in, it was recognised and activated without running the software at all; at the time of the software trying to connect the device, it's already connected.Just in case it was a matter of an old version of the driver and Cisco Connect software, I went online to the website and downloaded both the most recent driver and the latest version of Cisco Connect. The Cisco Connect crashed just like the version on the CD, and the driver said it was already the latest version and wouldn't install.So I tried the direct chat option. I spoke to two people. One of them lead me to give them a lot of information, then began asking me about my router... and promptly forgot about the adapter. They even had me on the path to resetting and installing software for the router I'm connected to, which isn't mine. Then the chat session crashed. why the Cisco Connect program keeps repeatedly crashing, and how I can stop it from doing so. As it stands, I think the adapter is overloading the memory on my computer and causing blue screens; I've been getting them ever since I connected the adapter. I think it might have something to do with my computer automatically detecting and activating the device when it's plugged in, but I'm not sure.
View 5 Replies View RelatedI'm starting this thread because I can't get my new Linksys AE2500 wireless use adapter to connect to my new Linksys X2000 ADSL modem. I purchased both of these devices because my old 2wire modem kept dropping the wifi signal and I had to keep turning off and on the modem in order to get the wifi signal back. Now my problem is that I can't connect my AE2500 adapter to the x2000 modem at all, heck I can't connect any wifi enabled device to the modem even though the SSID and password is correct. The adapter finds the network but it can't connect to it at all. The x2000 modem works perfectly since I can use the internet if I connect my computer to it via Ethernet cable but unfortunately I have my desktop in my room and the modem is in the living room so connecting using an Ethernet cable really isn't an option. I tried using my old 2wire modem to see if it would connect to that modem and it did as a matter of fact and the speeds were good but as of late, the speeds have been horrible and the signal drops every few minutes. I get 1 bar in the network status and speed of 1.0 Mbps. Here is a picture for reference:
The problem only persists when using wifi though because when connected to the 2wire modem, the speeds are fast. Range isn't really a problem because im like 10 feet away from the router so I'm not sure what's causing that problem. I assume it's the modem being that its about 7 years old so I would really like to get my x2000 working to see if it's better than my old 2 wire. I'm currently connected to my old 2wire modem via my AE2500 wireless usb adapter as that's the only way I can use the internet.Here's my info:
[code]....
A few weeks ago, I bought a Linksys AE2500 wireless adapter, and it's worked fine up until a few days ago. A few days ago, when I turned on my computer, I could not connect to the internet. I've tried uninstalling and reinstalling the drivers, but I am denied every time; the message I get is "A device attached to the system is not functioning".I've tried connecting to the internet with my other wireless box I used prior to getting the AE2500 and I cannot connect with that, either. The only way I can connect on this computer is with an ethernet cable.
View 12 Replies View Relatedi am using a Linksys AE2500 and it will randomly disconnect. the bar icon on the bottom right shows a yellow icon over it. running the tool to reconnect does not reconnect me to the internet, i have to reboot my computer.
View 9 Replies View RelatedHow to find the mac address of the AE2500?
View 2 Replies View RelatedI have an E1200 and an AE2500 adapter..I cannot get the ae2500 to connect to the router. I have another Belkin adapter that connects just fine but it only has speed up to 150mbps. I want to connect using the other adapter but cannot seem to get it working with this router.
View 5 Replies View RelatedI recently upgraded my router to the Linksys E4200 and setup a 40MHz connection using Channels 44+48 of the 5Ghz spectrum. This works really well on my wife's Lenovo T420 w/Centrino 2x2 and Windows 7. I get over 100Mbit sustained performing CIFS file transfers from my file server. My SSID for 5Ghz is different from 2.4 so I can easily verify which one I'm connected to.
I wanted to do the same on my laptop which is a bit older (Lenovo T410) and only supported 2.4Ghz. So I bought the new Cisco AE2500 802.11n USB adapter and plugged it into a USB2.0 slot (I believe all slots are USB 2.0 on this laptop). I'm using the latest driver from the Cisco website.
Windows XP reports a connection speed of "300Mbit" just like on the my wife's laptop -- but when I do the same CIFS file transfer my transfer rate is "stuck" at 39mbit download (13% of 300) and for uploads I'm getting 16-17% of 300 (approx 48Mbit).
I've tried fiddling with all manner of advanced settings in the Windows driver for the NIC with no avail. No matter what, it's like I'm capped at exactly 39 Mbit.
I tried reviewing the specs of the AE2500 and it says it has two antenna's per band. I assumed this meant it was 2x2? Is this not the case. Is it 1x1? Could this explain it? Or, does it matter which 5Ghz channels I use -- from the AE2500 spec sheet it seemed like it might not support all 5Ghz frequencies?
While 39Mbit is better than the 17-20Mbit I was getting on 802.11g, given how well my wife's laptop works using the Intel NIC it seems something is lacking with the AE2500 or its driver.
I have tried numerous times to install the disk and the adapter, but it always says it cannot locate the adapter. I know that the ports (I have tried them all) are working properly because they have been in use. I tried the chat. He suggested I call the 1-800 number. I don't have time to wait on hold forever, which I did anyway until I finally hung up.
View 5 Replies View RelatedAre thay both the same hardware?what's the difference ?
View 1 Replies View Relatedwhat is the difference between LINKSYS ADAPTER WGA600N VS AE2500? for upgrade the ghz of my playstation 3 to 5ghz...
View 6 Replies View Relateddifference between AE1000 and AE2500. Is this difference only usb base station?
View 4 Replies View RelatedI have purchased a couple network usb adapters (Netgear N-300 and Linksys AE2500) and both work fine surfing the internet but when I try to play World of Warcraft the wifi loses connection to the router and I lose all internet capabilities on my computer. My friends computer is still able to use the internet though.
View 1 Replies View RelatedI have 3 computers all running Windows 7 64bit. I had to move my desktop computer to a different room with no ethernet connection so I purchased a Linksys AE2500 usb wireless adapter for it. My router/modem is a Actiontec 2000 which came with my internet. When I have my desktop on and connected to the internet it slows down all the computers on the network and it is really slow. My question is do I have something installed wrong? I used the driver for teh adapter from this site and nothing else has changed.
View 2 Replies View RelatedI can't connect on my 2500 on my xp system. I just wiped the drive and did a fresh install on everything due to a virus. I updated xp/ and drivers and installed the ae2500 drivers. When I try to log on it starts to and shows connected however, it tells me "windows was unable to find a certificate to log you on to the network" I noticed that this system has the same ae2500 with windows vista and uses wpa2-personal, aes. The xp system only has options for wpa-personal, aes. Is this the problem or is it something else?
View 1 Replies View Relateddesktop with Windows 7. It is connected to the internet in my office thru Uverse (AT&T). We previously had a standard router, but upgraded since it seemed to be moving too slow. This problem with the adapter existed then also and we thought maybe it was too many computers slowing down the router.The adapter works great until I try to open certain websites. Then it loses its mind. I get a popup that says "Dial Up Connection" and wants me to choose to connect or work offline. When I click connect, I get a second window that says "Connecting through WAN Miniport", but it never actually connects to the page. Then lastly, a third popup says it has an error connecting and wants to redial and starts a countdown. But again, it never connects to the page.
View 3 Replies View Relatedwhat is the optimal advanced settings for the ae2500 wireless adapter while gaming. I keep getting lag spikes with my games. Is there a always on option or like a gaming mode? If so what is it.
View 1 Replies View RelatedI recently moved to a building that does not have wired Internet access. Upon the recommendation I purchased a Linksys AEE 2500 USB wireless adapter. I am unable to install the software which means, of course, I am unable to access any of the settings.The setup initializes, shows me the wireless network available (it has a locked padlock symbol next to a), and prompts me for the encryption key. It accepts the key and it's at this point the setup stalls. It shows the "attempting to connect to network" screen then, after whatever interval the software is set for before it times out, I get a notification that setup was unable to access the network. The generic Windows drivers access the network just fine although I only get two bars and a fair connection.I do have Internet connection through the windows drivers but it is slow and watching streaming video from Netflix is next to impossible.Long story short
View 4 Replies View RelatedI have a AE2500 USB Adapter. Whenever I go to connect it from my host machine to my VM I receive a Code 10 Error in Device Manager(Device Cannot Start). The VM locks up for awhile then comes to for a moment. Problem stops when the USB adapter is removed.
View 5 Replies View RelatedWhat are the maximum number of AE2500 wireless adapters can be installed on a PC running Windows XP SP3 using the windows wireless zero configuration? Recently I'm working on a program that needs multiple seperate wireless connections on a Windows XP SP3 PC. Each wireless adaptor is given a static IP address to respond to traffic at some specific ports. I can install four AE2500 adaptors without problem, but it disconnects the first AE2500 device when I plug in the fifth AE2500 adapter. I've tried on different windows XP machines. They all get the same problem. I wonder if it is a limitation in the AE2500 driver.BTW I've also tried to install an Valet AM10 adaptor as the fifth adapter, it seems ok. Yet installing more AM10 adapters beyond the fifth (4 AE2500 + 1 AM10) requires some luck. It may disconnect the other AM10 devices when I plug in another AM10 adapter.
View 1 Replies View Related