Serial Port Is Not Detecting The Fax Modem?
Apr 13, 2012
serial modem US robatics 5686G is not detected on windows server on serial port com1. i tried to restart the server . turn the modem on and off disable the com1 port reenable it again . update the firmware of modem on different workstation and connect it back to server ( couse it's working on another workstation so it's not the modem) i really don't know what to do is there a trick for this like in registry or somthing in mouse settings that mouse could actully detected on com1 and don't let the modem to show up on device manager? by the way modem cable is serial cable i tried to change the cable as well non of my ways works?
View 4 Replies
ADVERTISEMENT
Jun 20, 2012
i have a DSL-2730U WIRELESS N 150 ADSL2+ 4-PORT ROUTER which i have been using for the past 2 months.It was working fine,but since the last 5 days when i plug the lan wire into the PC port, nothing happens...it doesn't get recognized..the green light in the port is always glowing..i've tried another cable..same problem...i've tried it on another laptop..it works FINE....
View 1 Replies
View Related
Jan 19, 2013
my new laptop is not detecting my modem.its windows7 os
View 1 Replies
View Related
Oct 29, 2012
I turned on my PC this morning and I found I could not connect to the Internet. I have a few other computers and devices in the house that are ALL connecting to the Internet fine. I've tried basic things like unplugging /re-plugging the Ethernet cable, resetting router, attempting to set up a new network, system restore, running norton anti-virus to detect any potential problems etc all of which haven't resolved the issue.
I also checked my device manager to see if my drivers were up to date and I found that under 'Other Devices' my Network Controller stated that the drivers were not installed. I'm not sure if this is the issue (considering my Internet was working absolutely fine less than 24hrs beforehand) but I can't search the Internet to automatically find the driver for obvious reasons.
I found a few people suggesting to use the hardware id to find the appropriate driver, any direct link to the driver. My network controller hardware id is below:
PCIVEN_1814&DEV_0301&SUBSYS_25611814&REV_00
PCIVEN_1814&DEV_0301&SUBSYS_25611814
PCIVEN_1814&DEV_0301&CC_028000
PCIVEN_1814&DEV_0301&CC_0280
View 1 Replies
View Related
Feb 13, 2013
It will not be detected by the software, and i'm not sure whats wrong. I have tried every single usb port, and my OS is Windows XP SP3.
View 1 Replies
View Related
Apr 2, 2012
I have an E4200 and a WD MyBook Essential 2TB. They were working very well for the longest time, detecting a speed of USB 2.0. I had to get a new desk, thus had to disconnect all my devices, including the router. After plugging everything back in, the router only detects USB 1.1, even though the device is clearly USB 2.0.
View 5 Replies
View Related
Apr 25, 2011
HP just released the 8560p elitebook- not a bad shake and it actually has an integrated Serial port.Any other notebooks that have integrated serial ports?- I know the T6x Thinkpads used to use a slimbay adapter thing. I just hate the Usb adapter, and bossman said I could get a new computer here pretty soon...
View 2 Replies
View Related
Apr 11, 2006
How to know the serial0 or 1 (to v35 modem)was good or not ? is there any tool (software) or hardwire jumper to simulate loop back ?
View 4 Replies
View Related
Sep 5, 2012
We want to multicast several serial ports over the WAN/LAN network.In few words what we need to do is transport is several serial ports, is like a RS-485 network but in this case via IP.I do some similar to transport 4E&M lines with great results but I don't know how to start to do the same but with the Serial ports.
View 1 Replies
View Related
Mar 16, 2011
I just installed a HWIC-2T in a Cis co 3845 running IOS 15.1(3) T New build.The IOS self installed the port configuration including the command line "clock rate 2000000." I can edit everything but that entry using the CLI. When I enter the "no clock rate" it will not take in the running conf.
View 2 Replies
View Related
Jan 5, 2012
I need to connect to the console port on a cisco firewall, an rj-45 connector. The cable is a rj-45 at one end and a serial on the other. My PC has no serial port and I am unable to use the provided cable to connect to the firewall appliance. Is there software that can allow serial over my PC's Ethernet? I really don't have time to order a serial card for my PC.
View 1 Replies
View Related
Apr 23, 2012
Just want to ask if 4-port serial HWIC-4T is compatible for the Cisco 2801?We need additional HWIC for Fast Ethernet but the problem is we don't have already slot for it.We already have two HWIC-2T 2-port serial which is inserted at slot 1 and slot 3. We're planning to buy 4-port HWIC-4T so we can use the slot 3 for HWIC Fast Ethernet.if it's possible to have the 4-port serial HWIC-4T be inserted to Cisco 2801.
View 1 Replies
View Related
Aug 21, 2009
On the WAN port, there are 4 pins that are traced to the internal serial traces. Where can we get the cable that will fit into the WAN RJ-45 port and have a serial connector on the back end. It may be called a Cisco Debug Adapter, but we haven't been able to find?
View 9 Replies
View Related
Jun 19, 2011
Is there a Port Adapter (PA) with Synchronous/Asynchronous Serial Ports, for Cisco 7200?
View 1 Replies
View Related
Sep 21, 2012
I have a 1905 series cisco router, when I run "sh int" command it gives me following details -
MTU 1500 bytes, BW 1544 Kbit/sec, DLY 20000 usec,
reliability 254/255, txload 7/255, rxload 151/255
Encapsulation PPP, LCP Open
Stopped: CDPCP
Open: IPCP, loopback not set
[code]....
let me know the significance of txload and rxload.This router is used for MPLS connectivity.Link is working OK..but I'm not able to understand exactly what is the above txload and rxload signify.There is also one peculiar phenomena occuring, when my reliability goes down then rxload also goes down or might be vise versa.
View 2 Replies
View Related
May 15, 2013
I have a host machine (Laptop, Win 7 Home Premium x64) running Windows 7 Ultimate x64 on VMWare Workstation 9. I've got this system set up for UMDF driver development, because I need a target machine to debug drivers on. However, because I'm developing drivers for Win 7 (x86 and x64), I cannot connect to the virtual machine on via a simple network connection. Connection methods are outlined here.
I have tried a few different pieces of software (mostly Eltima software), and have Google'd every combination of phrases that I can think of. I can't find any information on this anywhere. I don't just need to share data between the machines, I need a more "physical" connection.
Does any know how to do this, or if there's another (preferably more simple) way of doing it?
View 1 Replies
View Related
Feb 15, 2013
I have two 2950 Switches and am trying to connect via my laptop. My laptop doesn't have a serial port so I am trying to connect through the ethernet port, with a straight through cable and on the end as it goes into the console port I have bought a cisco console rollover adapter.When I turn on terra term I get nothing...just a black screen and it disconnects.
View 6 Replies
View Related
Jan 16, 2013
I want to connect my tata photon device to my bsnl wifi modem via a usb portavailable on the bsnl modem. This is to provide a wifi network that i can use to surf the net on my phone.
View 4 Replies
View Related
Feb 26, 2012
is it possible to connect the wan port of a cable modem to a lan port of the home network? the reason is, i need some wifi access and more ports to my wired network, and the most reasonable solution would be a cable modem router with wifi and 4 ports just plugged into one of my routers.
View 2 Replies
View Related
Oct 29, 2012
I have tried everything possible with this modem and router. I cant figure it out. I tried the router in bridge mode, tried opening the ports up on both of them.
View 14 Replies
View Related
Aug 26, 2012
I have an issue/doubt regarding the configuration of a modem + router. The modem is a netopia-3000 (who care ) and the router is a netgear WGR614V9, The first has the address 192.168.1.1, the second 192.168.0.1 My pc in dhcp take the address from the router (192.168.0.x) and internet work, but if I set the ip manually 192.168.1.x it stop to work, why?
View 1 Replies
View Related
Oct 4, 2012
I have ATT u-verse currently and it connected to a router but I am going to need several more gigabit ports so I wanted to get an 8 port gigabit switch. I would plan on running a cable from my U-Verse modem to my router then to my switch giving me wireless and 8 gigabit ports. Would that work? I've never done this before so I wasn't sure if I was missing something or not.
View 2 Replies
View Related
Nov 27, 2012
My roommate and I have High speed cable internet and the modem is set up in his room. I bought a n600 belkin router and a usb wireless adapter so my computer in my room will get internet. Only problem is there is only one ethernet port on the modem that the internet provider gave us and of course that is taken up by his computer. How do I hook up the router to the modem and get all this to work so I can get on the internet as soon as possible?
View 1 Replies
View Related
Feb 10, 2013
Can't port forward port 25565 for Minecraft server via Hamachi. I checked on Open Port Check Tool - Test Port Forwarding on Your Router and GRC*|*Port Authority, for Internet Port 80** both says theyre closed.
I dont know if I need to open firewall or any **** like that, because Im a beginner at networks, so.. That's how it looks like for now: Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
View 3 Replies
View Related
Sep 16, 2011
watch netflix on my tv,which has netflix,but has a Ethernet connection,and must use a rj45 cable,can I change it over to a wireless signal,so I won';t have to use a cable?
View 1 Replies
View Related
Feb 21, 2011
Can I use a mobile internet modem on the USB port?
View 10 Replies
View Related
Aug 26, 2011
how do i open a port on Motorola modem
View 1 Replies
View Related
Aug 15, 2011
I'm trying to forward ports for game connections. For this particular game, I'm trying to forward port 7777My ports aren't forwarding according to: Open Port Check Tool - Test Port Forwarding on Your Router and Open Port Check Tool[CODE]
View 13 Replies
View Related
Nov 20, 2012
I have a cisco 1941 ISR router and I am trying to configure a router to allow a modem for Offband or Out of band access.Below is the configuration on Aux port on Line (n): [code] I have US Robotics 56k Faxmodem which is connected to aux port of router and I am using USB dialup modem with my laptop to dailin to the router which is connected to a US Robotics Faxmodem. Then I have accessed my USB dialup modem throught HyperTerminal and I can issue all at commands and to dialin to the modem I have used the following commandatdt91401111 1111 (atdt followed by country code, area code and landline number)Once I issue the above command it give me message Connected and after this I just get a flashing cursor. I cannot do anything nor will it display a username login prompt.
View 1 Replies
View Related
Jul 24, 2012
Our small business just moved into a new building and I am in charge of setting up the network infrastructure. I am not new to computers or networking but I have never had to deal with this set up before.
Our current set up.We have a cable modem from comcast that has the Coax cable connected to it.The modem has 4 ports on it. The ports are connected to a built in 24 port switch that was already in the building. The switch has it's ports connected to outlets in the walls. Currently we have 4 computers on our network and since the cable modem had 4 ports it worked fine.
What we need? We will have another person join our office so I will need to activate one additional port on the switch that already exists. However, since all 4 ports on the modem are already taken, I have no way to add an additional port. They also want us to get wifi in the building.How I think I have to solve the problem (most likely wrong).I have to get another switch (like 8 port) and connect the cable modem to the switch using a cross over cable (if there is no designated internet port). Since I have the modem connected to the switch, I will have to move the 3 remaining connections to the switch.
Then I connect the 4 remaining ports on the switch to the existing 24-port switch that is already there. I will use one of the outlets in the building to connect an AP for Wi-Fi for better signal. Currently the modem and switches are hidden in a closet away from the office space and would mess up the signal.
View 4 Replies
View Related
Feb 10, 2011
My computer ethernet port recognizes any modem but will not recognize any wireless routers. My ISP (DSL) spent 3 hours on the phone with me and can't figure it out. I have also contacted Gateway, figuring it must be my computer. I make money on the side fixing computers, so I do have a good idea as to what is what. I run Win7 on a Gateway DX4822 with Intel Pentium Dou-core. I have searched and searched for months and have found nothing. I have asked this question on various forums (including Microsoft) and still nothing.
I have wireless connectivity with a USB 2.0 WAN antenna. I also have a blu-ray player, XBox 360, and Wii all hooked up through this router. The player and XBox are wired, the Wii and a printer is wireless.I have had all things disconnected while trying to solve this issue, thinking that somehow there wasn't enough juice getting through. The cable works. I have tried resets, powerdowns, restarts, system recovery (at one point for a few days it did work as I shared internet from a friend upstairs from me), system restore, many different wireless routers AND modems. With the router connected, the ethernet port light does NOT come on. With the modem directly connected, the light DOES come on. Other computers/laptops in the house work wired into the router.
View 6 Replies
View Related
Nov 30, 2011
I have at&t DSL with Westell Modem/Router in Bridge Mode and Linksys Router connected. The internet is working fine, but I'm unable to forward ports on the Linksys Router. The ports are 80 and 37777.
View 1 Replies
View Related
Jan 24, 2013
Can i connect my 3g USB modem to my dlink router directly through the usb port.
View 10 Replies
View Related
