Cisco WAN :: Port Adapter With Synchronous / Asynchronous Serial Ports For 7200
Jun 19, 2011Is there a Port Adapter (PA) with Synchronous/Asynchronous Serial Ports, for Cisco 7200?
View 1 Replies
ADVERTISEMENT
Cisco WAN :: 7200 STM4 Port Adapter
Jul 30, 2012I'm using PA-SON-OC3 on 7200VXR (NPE-G1). I want to upgrade the link to OC12 with same wavelenght. I found PA-SRP-OC12SMI for this purpose but I'm not sure about compatiblity.
View 2 Replies View RelatedLinksys Wireless Router :: Serial Connector Adapter / Cable For WAN RJ-45 Port?
Aug 21, 2009On the WAN port, there are 4 pins that are traced to the internal serial traces. Where can we get the cable that will fit into the WAN RJ-45 port and have a serial connector on the back end. It may be called a Cisco Debug Adapter, but we haven't been able to find?
View 9 Replies View RelatedCisco WAN :: 1941 / Cannot Apply Service Policy On Multiple Serial Ports
Jul 18, 2011I've run a across a strange issue that I've not encountered before and after the things I've tried am beginning to think it's a limitation of the router itself. What I have are 3 Cisco 1941 routers that are all endpoints for a customer's MPLS network. STL is the headquarters and both remote offices have a link back this router. Each of the remote locations only have 1 serial interface. It is a flat network with few routes and a small shoretel voip system running across it. Each router is running C1900 Software (C1900-UNIVERSALK9-M), Version 15.0(1)M5, RELEASE SOFTWARE (fc2).
QoS is configured as follows on each router:
class-map match-any AutoQoS-VoIP-Remark
match ip dscp ef
match ip dscp cs3
match ip dscp af31
class-map match-any AutoQoS-VoIP-Control-UnTrust
match access-group name AutoQoS-VoIP-Control
class-map match-any AutoQoS-VoIP-RTP-UnTrust
[code]....
If I try to apply the policy map to serial0/0/0, I get the following error:
% policy map utoQos-Policy-Untrust not configured
I've tried to create a different policy map with the same settings and get the same error. We thought that when it was first set up, each interface belonged to the same network, so we separated things out (hence the .252 mask). I'm not sure what else to try and I'm hoping its something painfully simple that I'm missing.
Cisco WAN :: 2620 / 2950 - Serial To USB Adapter For Routers?
Jun 26, 2012I have some 2620 routers and 2950 switches that have Console Ports that are serial. However my HP PC w.Win 7 dosent have any serial ports. I am looking for a USB to Serial converter that will allow me to access the console ports so I can configure these devices. I've read many old posts and still havent found a solution. Is it true that none of these cables work? Anything that will work on XP? (also have XP PC's).How about a RJ45 to Serial?? How about a PCI Serial card? I cant believe Cisco hasnt developed a conversion cable to use with their Console Cables?
View 4 Replies View RelatedCisco WAN :: 3560V2 Using Console Cable Attached To USB To Serial Adapter
May 9, 2012I am having issue consoling into Cisco 3560V2 using console cable attached to USB to serial adapter.using putty.when i try to login on the putty i only see black screen.
View 5 Replies View RelatedCisco :: Latitude E6410 - USB To Serial Adapter / Break Sequence
Jan 17, 2012I have a Dell Latitude E6410 laptop that does not have a Serial port or a Break key on the keyboard. I have a Prolific PL2303 USB-to-Serial adapter which is installed and I can access the CLI ok with this setup via HyperTerminal.
My problem is that I am unable to break into ROMMON using the break sequence Ctrl + Break (as there is no break key). I have also tried TeraTerm with the break sequence of Alt + B.
Additionally, I have tried setting the baud rate to 2600 and pressing the space bar for 10 seconds to no avail.
when I may need to break into ROMMON.
Cisco WAN :: 7200 - How To Block SMTP Port 25 On Router
Jan 24, 2012We are running ISP and now a days we have many spam in our network, we want block the SMTP port 25 block on Cisco router 7200. So we can block the spam in our network.
View 3 Replies View RelatedCisco WAN :: 2600 Router - Way To Get Serial Port V35
Apr 11, 2006How to know the serial0 or 1 (to v35 modem)was good or not ? is there any tool (software) or hardwire jumper to simulate loop back ?
View 4 Replies View RelatedCisco WAN :: How To Multicast RS-232 Serial Port Data
Sep 5, 2012We want to multicast several serial ports over the WAN/LAN network.In few words what we need to do is transport is several serial ports, is like a RS-485 network but in this case via IP.I do some similar to transport 4E&M lines with great results but I don't know how to start to do the same but with the Serial ports.
View 1 Replies View RelatedCisco WAN :: 3845 - Configuring Serial Port In IOS 15.1(3)T?
Mar 16, 2011I just installed a HWIC-2T in a Cis co 3845 running IOS 15.1(3) T New build.The IOS self installed the port configuration including the command line "clock rate 2000000." I can edit everything but that entry using the CLI. When I enter the "no clock rate" it will not take in the running conf.
View 2 Replies View RelatedSerial Port Is Not Detecting The Fax Modem?
Apr 13, 2012serial modem US robatics 5686G is not detected on windows server on serial port com1. i tried to restart the server . turn the modem on and off disable the com1 port reenable it again . update the firmware of modem on different workstation and connect it back to server ( couse it's working on another workstation so it's not the modem) i really don't know what to do is there a trick for this like in registry or somthing in mouse settings that mouse could actully detected on com1 and don't let the modem to show up on device manager? by the way modem cable is serial cable i tried to change the cable as well non of my ways works?
View 4 Replies View RelatedHp 8560p Elitebook - Integrated Serial Port
Apr 25, 2011HP just released the 8560p elitebook- not a bad shake and it actually has an integrated Serial port.Any other notebooks that have integrated serial ports?- I know the T6x Thinkpads used to use a slimbay adapter thing. I just hate the Usb adapter, and bossman said I could get a new computer here pretty soon...
View 2 Replies View RelatedCabling / Cards :: Connect To Cisco Console With / Without PC Serial Port?
Jan 5, 2012I need to connect to the console port on a cisco firewall, an rj-45 connector. The cable is a rj-45 at one end and a serial on the other. My PC has no serial port and I am unable to use the provided cable to connect to the firewall appliance. Is there software that can allow serial over my PC's Ethernet? I really don't have time to order a serial card for my PC.
View 1 Replies View RelatedCisco Infrastructure :: 4-port Serial HWIC-4T Is Compatible For 2801
Apr 23, 2012Just want to ask if 4-port serial HWIC-4T is compatible for the Cisco 2801?We need additional HWIC for Fast Ethernet but the problem is we don't have already slot for it.We already have two HWIC-2T 2-port serial which is inserted at slot 1 and slot 3. We're planning to buy 4-port HWIC-4T so we can use the slot 3 for HWIC Fast Ethernet.if it's possible to have the 4-port serial HWIC-4T be inserted to Cisco 2801.
View 1 Replies View RelatedCisco WAN :: 1905 / Clarification On Txload And Rxload On Serial Port For Routers
Sep 21, 2012I have a 1905 series cisco router, when I run "sh int" command it gives me following details -
MTU 1500 bytes, BW 1544 Kbit/sec, DLY 20000 usec,
reliability 254/255, txload 7/255, rxload 151/255
Encapsulation PPP, LCP Open
Stopped: CDPCP
Open: IPCP, loopback not set
[code]....
let me know the significance of txload and rxload.This router is used for MPLS connectivity.Link is working OK..but I'm not able to understand exactly what is the above txload and rxload signify.There is also one peculiar phenomena occuring, when my reliability goes down then rxload also goes down or might be vise versa.
Cisco Switching/Routing :: 2950 Laptop Doesn't Have Serial Port
Feb 15, 2013I have two 2950 Switches and am trying to connect via my laptop. My laptop doesn't have a serial port so I am trying to connect through the ethernet port, with a straight through cable and on the end as it goes into the console port I have bought a cisco console rollover adapter.When I turn on terra term I get nothing...just a black screen and it disconnects.
View 6 Replies View RelatedWindows 7 - Connect Virtual Machine To Host Via IEEE1394 / USB Or Serial Port
May 15, 2013I have a host machine (Laptop, Win 7 Home Premium x64) running Windows 7 Ultimate x64 on VMWare Workstation 9. I've got this system set up for UMDF driver development, because I need a target machine to debug drivers on. However, because I'm developing drivers for Win 7 (x86 and x64), I cannot connect to the virtual machine on via a simple network connection. Connection methods are outlined here.
I have tried a few different pieces of software (mostly Eltima software), and have Google'd every combination of phrases that I can think of. I can't find any information on this anywhere. I don't just need to share data between the machines, I need a more "physical" connection.
Does any know how to do this, or if there's another (preferably more simple) way of doing it?
DGS-1224T How To Port Mirror All Ports
Dec 14, 2011I just aquired a DGS-1224T and can't figure out how to port mirror all ports. Any utility for download? Web interface is limited on port mirror. possibly an additional utility? Manual looks much different than web interface, makes me think they have a configuration utility but I can't find a download link.
View 5 Replies View RelatedCisco Switches :: SF-300 Deny Access To From One Port To Other 4 Ports
Jul 20, 2011I have 5 VLANs, I assign VLANs to its ports and make them all Untagged.I created ACLs and a ACE rules for each ACL, and then assigned to the ports.So what i am trying to do is to deny access to from one port to other 4 ports and granted access to any other ports. But it is not working, without last rule "allow any any" it has no access to any ports, with the last rule it grants access to every port even to those I denied.Router in Layer 3 mode, all VLANs have their IP's.
At some moment I was able to work it properly but without using any rules, I just tagged my untagged VLANs to those ports which I wanna get access to. As you can see I want allow ports GE1 - GE4 communicate with 1 to 24 ports but not to each other.
Cisco Firewall :: Port Forwarding A Range Of Ports (PIX 6.3)
Dec 5, 2012I have a network with multiple servers behind a PIX with 6.3 on it. I have one public IP address, and I'm using NAT. I'm currently trying to port my Exchange server to a cloud host, and the vendor is requiring I open up a wide range of ports for MAPI, basically ports 1024 on. What would be the command to forward all of the trafic cominto/from that broad range? if I could simply route all trafic to and from their two IP addresses to my email server, that would accomplish the same end goal.
View 3 Replies View RelatedCisco Switching/Routing :: Will All 4-ports Of N5K Will Be Same Port-channel
Sep 12, 2012Have 2 N2K with dual-connections to both 2 N5K, will all 4-ports of N5K will be the same port-channel. N2K as well ?
View 1 Replies View RelatedCisco Security :: 3560 Whole Switch Ports Not On Some Port
Mar 10, 2013I am using 3560 switch senerio is that we have dhcp server on and I want that switch filter mac on whole switch ports not on a some port. Switch only give IP to the mac whcih is in mac table of switch/particular which we enter manually.I have read chapter 62 of port security but it doesnot fulfill my requirements.I am also using 3com 5500Ei switch in which we dont have to bind a mac on every port, we just enter a mac in the switch and it filter itself by using simple commands.DHCP server is not in our hands, we cant do any things there.
View 1 Replies View RelatedCisco Routers :: RV220W - Port Forwarding - Different Ports
Nov 26, 2011I have a RV220W with 1.0.3.5 Firmware installed.
I also have a few servers with services I need to expose to outside the network (RDP and some websites) where the external port is not the same as the LAN port. I could accomplish this with my previous router using port forwarding and it looks like I can do the same here on the RV220W but I can't quite get it to work successfully.
Port Forward Certain Ports For One Computer But Need UPnP For 2 Different Ps3
Dec 20, 2011Need to port forward certain ports for one computer but need UPnP for 2 different ps3's.These are the parts I have. I have read that the GT704WGB does not have a true bridge mode. I don't want to bias anyone however. How to best use this equipment so that I can port forward ports on my laptop. There are also several laptops, desktop and phones on my network but the 2 ps3's and my laptop are what primarily concern me.
-Actiontec GT704WGB for Verizon DSL (Modem / Router Combo)
-Actiontec Support GT704WGB Wireless DSL Gateway for Verizon High Speed Internet access
Cisco Linksys wrt54gs v4 (Router) currently running Tomato firmware but I can flash dd-wrt back to it in a second.
Port Redirect With Default Ports On Application?
Apr 26, 2012I'm running several game and file servers via a dynamic IP, which I unfortunately cannot change to a static connection for several reasons. I've solved this by using No-IP, which is a Dynamic IP resolution service. This solved the first part of my problem - I can give people IP's for their websites, such as myfreemusic.sytes.net and so forth, but they all HAVE to append their ports to the url - i.e.
site1.sytes.net:90
site2.sytes.net:91
My main problem right now is the game servers - I'm hosting games that default host to 25565, and though I can change the ports the server hosts from, I must give those who want to connect the ports at the end of their urls, i.e.
server1.sytes.net:25566
server2.sytes.net:25567
I know DNS is essentially agnostic when it comes to ports, so no solution there. And I don't think the game (Minecraft vis-a-vis bukkit) supports SRV records, and even if they did, I'd have no idea how to configure them. How can I resolve static urls redirecting to a dynamic IP by pointing them to ports?
To simplify the question -
How can I make server1.sytes.net resolve to port 25566, and server2.sytes.net resolve to port 25567 when the default port is set to 25565?
Cisco Wireless :: Change Port Speed On 5508 Ports
May 16, 2013We use a wlc model AIR-CT5508-K9 with eight built-in ports. I would like to know if it is possible to change the speed of these ports down to 100Mb. At this time, they are set to auto and 1000Mbps.
View 3 Replies View RelatedCisco Firewall :: NAT - Multiple Ports Translated To Single Port - ASA 8.4
May 21, 2013We are migrating from a nother brand to an ASA Cluster running 8.4.5
We have a web-server on an inside interface listening on a non standard port - 20111. We have created a static NAT translating the public ip to the private, so If I do http://public-ip:20111 it works. (we are using a seperate public IP for this service only).
Now I need to create a NAT rule that will forward requests on BOTH port 80 and 443 to the same private ip and the same port number (20111)
The Private address is 10.99.250.20 and the "public" (I've replaced it in this example) is 172.16.16.16 I have managed to create a NAT that will translate 443 to 20111:
object network 10.99.250.20 nat (Private-DMZ,Outside) static 172.16.16.16 service tcp 20111 https
But if I try to add another rule like: nat (Private-DMZ,Outside) static 172.16.16.16 service tcp 20111 http It will simply replace the first one.
Is it possible to redirect both 80 and 443 from outside to the same port number and same IP on the inside?
Cisco Switches :: Port Mirroring Limit Of 8 Ports On SGE2010P
Jan 24, 2013Recently our company purchased 3 Lynksys SGE2010p, At the moment they work as a stack but as we are implementing UCCX we need to mirror 15 ports but during the provisioning i've noticed that the limit is 8 ports per stack. I'm wondering whether this is a known issue or just a known limitation . I believe that most probably i'll need to move back to stand alone mode so i could configure 8 mirrored ports per switch.
View 2 Replies View RelatedCisco Switches :: SG300-28P Can Support 24 Ports With 154w Per Port
Mar 6, 2013I want to know if the SG300-28P can support 24 ports with 15,4w per port at the same time.
View 3 Replies View RelatedCisco Switching/Routing :: WS-2960s-48lpd-l Sfp+ Ports - Possible To Have SFP Port
Feb 24, 2013The 2960s-48lpd-l comes with 2 SFP+ ports and is capable of supporting either SFP or SFP+ modules.
My question is:- if I have a SFP+ module in port 1, can I have a SFP in port 2? or do they both have to be either SFP+ or SFP?
Home Network :: No Open Ports Despite Port Forwarding
Jul 10, 2012I'm struggling to set up an SSH router and it always looks like the port is closed...
Here's my set-up
www>D-Link router (ADSL connection)>Linksys router (+Tomato)>Target PC
I have set up the Linksys router to be an SSH server running Tomato as described in many other forums. The "Tomato router" sits behind my ISP-provided D-link-2680 router.
The internal IP of the Tomato router is 192.168.1.200 and if I try: Code:
Cisco Switching/Routing :: 25565 Port Forwarding Not Working On Some Ports
May 15, 2013I've created some port forwards from my public IP (Dialer0) to our private LAN but only the 25565 port forward works. I've even added an any statement to the Nat source list Homenet_NAT. Full config attached. My Cisco router is an 877W. [Code]
View 6 Replies View Related