I have 2 x PC and 3 x laptops. Currently the 2xPCs are connected by ethernet LAN and a printer through a 5-port switch. Would it be possible to add a router into the system somewhere so that the 3xlatops can access the network?
View 2 RepliesI'd like to know if there is some easy-ish way to combine wifi and ethernet in a network.Since a picture says a thousand words, here's what I want to achieve:I use the desktop computer as a file and media server using windows home group.I have the laptop running windows 7 connected to the TV.So far I've been using just wifi, but when I try to stream movies from my desktop to the laptop I get freezes and glitches.I can't connect both my desktop and laptop wired to the ADSL router, since it's behind a wall I'm not allowed to drill trough.I have a spare network switch and cables, so I was thinking I could connect the ethernet adapters on the desktop and laptop together trough the switch, I'm just not sure how to configure the computers.
View 3 Replies View RelatedAt my office, I have two ISPs. Here is the configuration:
ISP1:
- Firewall > Switch > LAN 192.168.10.xxx
- Wireless Router1 Connected to Switch above > WLAN 192.168.10.xxx
ISP2:
- Wireless Router2 connected directly to main RJ-45 jack coming from ISP2
- WLAN 192.168.1.xxx
ISP1 is a T1 line bundle. It was slow for our wireless users in the office. So we went ahead and signed up a cable internet connection from ISP2. The one and only one device connected to ISP2 jack is a wireless router (Wireless Router2).People who are connected to Wireless Router2 (192.168.1.xxx) can't see anything in our LAN and WLAN (192.168.10.xxx); for example Domain Controller, Printers, File Server, etc.How can I configure ISP2 setup so that both routers (or you can say both ISPs) are on the same network 192.168.10.xxx? I want to do this so everyone is on the same network and can see everything.
I am getting ready to move into new digs and wanting to set up my network. Main house cable internet will come in with modum to a dlink router for both wired and wireless. desktop and a magic jack wired into router wireless for ipad and laptop. then run wire to workshop about 100' from house where a second magic jack and desktop will be set up (small biz out of workshop). I am pretty sure that the range of the router for wireless will reach to workshop fine for ipad but if not I will need to put a wireless up there tooext kids have a laptop running windows 7 but kids being kids and having had problems with self control on net in past I want to be able to make sure that I can turn them off from net when needed because
1. I do not want them running me past the data limits imposed by cable company and
2. keep them from sites such as those which got them in trouble in the past (kids are older and bought laptop for selves and pop will not go along with me confiscating it if they abuse internet privileges
How to make 2 (or more) connections work together and increase your final download and upload.You will need the following items
- A PC or server connected at high speed that is greater or equal to both connections speed (from a data center, You can get some very cheap $30 a month, a VPS can be good enough)
- 2 Internet connections at your home (DSL + cable for example)
- A router that supports dual WAN
- A Magic software that I can write for example
So what is needed is a way to split your data using some technology like the concept of RAID 0 (MAGIC software will be here used) and then use both IPs through the router to send the data to the server which will handle your request (it is possible to have a good usage of VPN here to forward all your traffic to the server without worrying about doing much work here). After that on the server you can reverse your RAID 0 data (using the same MAGIC software) and forward your request to the destination site that you want to visit. Same way the downloading will happen when the server receives a reply from the destination site, it will split the data using same RAID 0 technology (using the MAGIC software) and then send the data to both of your IPs. After that on your side you combine the received data (using the software) and you are done. Of course I do prefer the data splitting to happen using some hardware like a router with MAGIC software as it will be much more effective.
The fastest dsl speeds here is 1.5mbpsand I need something around 3mbps+. I'm curious if I could buy two 1.5 connections from my ISP and connect them both into a router and then hook a switch up to it and connect my PCs and everything to it to get 3 or if I would still just get the 1.5?
View 4 Replies View Relatedi have have lan in the office(internet installed) and i want to combine it with the lan in the computer lab for internet .i dont want to use cable as it might be too long .
View 1 Replies View RelatedI am trying to work out a way of combining two networks from two (Internet Service Providers or ISPs. One network is for Internet, and the second one is for CCTV cameras. Both networks exist and are working independently, each with its own servers. I want to re-design the whole system such that at any one time t, a supervisor with an Internet connection in his office can be able to see what is happening on cctv cameras without contacting the cctv personnel.
View 6 Replies View RelatedI have two different Internets from different ISPs can I intgrate in one to increase total bandwidth. (means 2+2=4)
View 1 Replies View RelatedRecently I have had a thought about changing the networking around my house.urrently we have two routers as my house is very tall and not very wide, they are called JohnsonNet1 and JohnsonNet2. Is there a way to get them to run one network called JohnsonNet?
View 3 Replies View RelatedI have two LANs in my house, one 10/100 base and the other 10/100/1000, but one internet connection that I would like to have access to on both networks. Right now I have two Belkin routers for each network. In addition I have a Cisco 2600 and 3660. I know they are old, but they seem to be in operational order. Can I use those to combine to two networks? The only thing I want to maintain is the speed on the gig network, from the router to the PC's and devices.
View 6 Replies View Relateddo not have fast internet service so we must need to combine two or more different internet providers and get one speed kindly reply do you know any router/modem/switch which can do this for us.
View 2 Replies View Relatedhow we can combine the LAN and Wimax connections? We are using here in our office one Fiber optic line that is running fine and we want to make up a backup connection of Wimax or wireless, how we can combine these two connections ,Moreover we are using here D-Link firewall and Netgear FS-726T Router.
View 3 Replies View RelatedI am looking to expand my network. I purchased a WD N900 router to replace my old Linksys E1200 .The internet connection is coming from the modem, into the WD N900 Router. The WD N900 has the printer hooked up to it, and 3 NAS, a computer and our magic jack. I ran 30 feet of network cable and routed the cable through the walls into the section of the house. I am looking to use my old Linksys E1200 to extend my network. I want to hook up the gaming systems (PS3, XBOX360) as well as the entertainment receiver to my Linksys router. What is the best setup? I am looking to be able to access the NAS from the WD N900 on our PS3 and Xbox360 so LAN-LAN looks like the way to go. I tried using the directions on Linksys site, but it doesn't seem to want to work. I test the network cable I ran through the walls, and it is getting a good signal. However when I hook it up to the Linksys E1200 and connect my lap top the Linksys E1200 to test it isn't working.
View 6 Replies View RelatedI have 2 campuses. I have my 5508 wireless controller working beautifully on my main campus using LDAP. (YAY!!) Now for my problem. My remote campus has 1310 bridges. I was able to successfully upgrade one of them to work with the controller, however, I can't get the other two bridges to talk to the one that I upgraded and I can't get them to upgrade, it indicates that they need to be the root. I have several small buildings on that remote campus, than need that remote bridging in order to be able to have network access.
View 7 Replies View RelatedI have a 5915 mobile router with software version 15.2(1r)GC1. Ports FE0/0 and FE0/1 are routed ports. Ports FE0/2 through FE0/4 are layer 2 switched ports. I'd like to put FE0/1 and FE0/2-4 in the same address space so that all four ports can be used as a single LAN and FE0/0 would be used as a WAN port. How do I configure the router to place FE0/1 and FE0/2-4 in the same LAN.
View 1 Replies View RelatedI seem to be struggling to connect more than 4 cameras to my (ISP-supplied) modem/router by Netgear CGD24N via WPS. I'm on my 5th camera now (already have 3x 930L and 1x 942L) but the newest 942L just won't connect to the network at the moment and there's definitely no faults here as I swapped cameras today at the local retailer (and got an A3 942L!).I've even tried connecting the camera to my wireless extender (Netgear WN3000RP) but no luck there.
So far it has only worked twice for short periods of time (enough for me to configure the cameras) but since then I can't actually get it working. I've got a couple of spare wireless routers lying around too and should be receiving a DIR-600 soon (from the Netgear promotion in Australia) which could be useful?
In the bottom floor there are three computers, an iMac computer that receives an average wireless Internet signal, desktop computer and a laptop.I want to take care of the desktop computer and buy a network card, the next card:TP-Link TL-WN951NNow it has three antennas, each of its reception range is 2 dbiI should buy three of the 10 dbi antennas and connect them to the network card?It will give a good solution strong wireless signal and good speed?
View 4 Replies View RelatedI run a certain program in my PC and I need to make its data available to an iPhone app.I would like to broadcast it over WIFI from the laptop.How can I set up a simple wifi network so the iPhone can connect as described?I was thinking of wireless router connected directly to the PC.
View 6 Replies View RelatedI have a 3G e-stick. I would like to set up a wi-fi network in my room so that my other friends can also access the Internet through my 3G e-stick.
View 2 Replies View Relatedwhat is my wi-fi network ssid and security no
View 3 Replies View RelatedWhen I'm at my friends house I am unable to connect to his wifi network. He uses a Actiontec router M1424WR. His internet service is through Verion Fios. I have connected with other equip such as a tablet but I'm unable to connect with my laptop. I have a Toshiba Satelite C675.
View 4 Replies View RelatedCouple of weeks ago, I bought a net gear n600 dual band router. It's worked perfectly until last night. The network won't show up on any wireless devices in the house. I have restarted and reset it and my modem which is a westell. Sometimes the computer plugged in to the Internet with the Ethernet cord can connect and sometimes it cannot. What is the next step to figuring this out
View 1 Replies View Relatedhave a netgear dg834gt and an asus dsl-g31. i can connect either to my internet connection as a wireless router.i have an xbox 360 (upstairs) with only an ethernet conection.id like to connect the xbox 360 to one of the routers via ethernet then the router to connect via wifi to the main router to the internet (downstairs)its a long way with no direct route for a cable but a good wifi signalis this possible?i understood i needed to create a bridge?here are a setting option in the asus for a bridge but im lost on set up.
View 6 Replies View RelatedHP G62-b12SA Notebook PC, WINDOWS 7 (64 BIT). wifi card realtek 8191se.The wired LAN is working fine. but the wi fi is not detecting any wifi network leave alone joining.the laptop was bought in UK being used in India. The wi if was working fine till about one month back.Windows couldn't automatically bind the IP protocol stack to the network adapter.
View 13 Replies View RelatedMy laptop cannot see my wi-fi network, but it can see a lot of others for example my neighbour's.It is not a problem with my network, however as my iPad and my day's laptop can connect fine.
View 1 Replies View Relatedrecently I have set up a wifi network in my house, but when I tried to connect to it via my Windows XP (SP2) pc, it continually comes up with 'Limited or no connectivity'. I have tried multiple things, such as changing the network authentication method, to no avail.
View 3 Replies View RelatedI have a bt home hub. When I look at wifi networks I only see the hub. I want to take my laptop out so how an I check it will see other networks when away?
View 1 Replies View RelatedHow to make a wifi antenna to make a 10 km range connection ...
View 1 Replies View RelatedHave two wifi in my area but can't get on them what do I need to do
View 1 Replies View RelatedI am planning to have a friend visit and she will use her laptop with my wifi network. Is there any threat to my network if by chance she has a virus or other malware on her computer? I assume the only danger would be if I transfer files from her computer, but I just want to confirm that.
View 3 Replies View Relatedhow to create WiFi network with uninteruptable roaming between Access Points while clients are moving.What hardware is the best here? Are there any manuals about that?
View 2 Replies View RelatedNeighbor agreed to let me use his WiFi connection only if it requires no changes or disruptions on his side. His signal is broadcast with a wireless router. I can currently see his signal broadcast on my laptop, but it's very weak.I have a omnidirectional antennae already mounted outside my house with a clear sight of view. It has a cable attached to it that terminates with a N connector inside my building.I need to connect to his signal (there are several being broadcast in the area) and then forward it to my router. My router will then provide connectivity to my home network.What hardware do I need between the outdoor omnidirectional antennae (that terminates with a N connector) and the wireless router inside my building?
View 9 Replies View Related