Combining Two ISP's Into One Network
Nov 9, 2012
At my office, I have two ISPs. Here is the configuration:
ISP1:
- Firewall > Switch > LAN 192.168.10.xxx
- Wireless Router1 Connected to Switch above > WLAN 192.168.10.xxx
ISP2:
- Wireless Router2 connected directly to main RJ-45 jack coming from ISP2
- WLAN 192.168.1.xxx
ISP1 is a T1 line bundle. It was slow for our wireless users in the office. So we went ahead and signed up a cable internet connection from ISP2. The one and only one device connected to ISP2 jack is a wireless router (Wireless Router2).People who are connected to Wireless Router2 (192.168.1.xxx) can't see anything in our LAN and WLAN (192.168.10.xxx); for example Domain Controller, Printers, File Server, etc.How can I configure ISP2 setup so that both routers (or you can say both ISPs) are on the same network 192.168.10.xxx? I want to do this so everyone is on the same network and can see everything.
View 5 Replies
ADVERTISEMENT
Mar 8, 2013
I have 2 x PC and 3 x laptops. Currently the 2xPCs are connected by ethernet LAN and a printer through a 5-port switch. Would it be possible to add a router into the system somewhere so that the 3xlatops can access the network?
View 2 Replies
View Related
Nov 30, 2011
I am getting ready to move into new digs and wanting to set up my network. Main house cable internet will come in with modum to a dlink router for both wired and wireless. desktop and a magic jack wired into router wireless for ipad and laptop. then run wire to workshop about 100' from house where a second magic jack and desktop will be set up (small biz out of workshop). I am pretty sure that the range of the router for wireless will reach to workshop fine for ipad but if not I will need to put a wireless up there tooext kids have a laptop running windows 7 but kids being kids and having had problems with self control on net in past I want to be able to make sure that I can turn them off from net when needed because
1. I do not want them running me past the data limits imposed by cable company and
2. keep them from sites such as those which got them in trouble in the past (kids are older and bought laptop for selves and pop will not go along with me confiscating it if they abuse internet privileges
View 1 Replies
View Related
Jun 17, 2012
How to make 2 (or more) connections work together and increase your final download and upload.You will need the following items
- A PC or server connected at high speed that is greater or equal to both connections speed (from a data center, You can get some very cheap $30 a month, a VPS can be good enough)
- 2 Internet connections at your home (DSL + cable for example)
- A router that supports dual WAN
- A Magic software that I can write for example
So what is needed is a way to split your data using some technology like the concept of RAID 0 (MAGIC software will be here used) and then use both IPs through the router to send the data to the server which will handle your request (it is possible to have a good usage of VPN here to forward all your traffic to the server without worrying about doing much work here). After that on the server you can reverse your RAID 0 data (using the same MAGIC software) and forward your request to the destination site that you want to visit. Same way the downloading will happen when the server receives a reply from the destination site, it will split the data using same RAID 0 technology (using the MAGIC software) and then send the data to both of your IPs. After that on your side you combine the received data (using the software) and you are done. Of course I do prefer the data splitting to happen using some hardware like a router with MAGIC software as it will be much more effective.
View 3 Replies
View Related
Jun 17, 2012
The fastest dsl speeds here is 1.5mbpsand I need something around 3mbps+. I'm curious if I could buy two 1.5 connections from my ISP and connect them both into a router and then hook a switch up to it and connect my PCs and everything to it to get 3 or if I would still just get the 1.5?
View 4 Replies
View Related
Aug 3, 2011
i have have lan in the office(internet installed) and i want to combine it with the lan in the computer lab for internet .i dont want to use cable as it might be too long .
View 1 Replies
View Related
Aug 10, 2012
I am trying to work out a way of combining two networks from two (Internet Service Providers or ISPs. One network is for Internet, and the second one is for CCTV cameras. Both networks exist and are working independently, each with its own servers. I want to re-design the whole system such that at any one time t, a supervisor with an Internet connection in his office can be able to see what is happening on cctv cameras without contacting the cctv personnel.
View 6 Replies
View Related
Oct 28, 2011
I have two different Internets from different ISPs can I intgrate in one to increase total bandwidth. (means 2+2=4)
View 1 Replies
View Related
Mar 10, 2012
Recently I have had a thought about changing the networking around my house.urrently we have two routers as my house is very tall and not very wide, they are called JohnsonNet1 and JohnsonNet2. Is there a way to get them to run one network called JohnsonNet?
View 3 Replies
View Related
Dec 13, 2012
I'd like to know if there is some easy-ish way to combine wifi and ethernet in a network.Since a picture says a thousand words, here's what I want to achieve:I use the desktop computer as a file and media server using windows home group.I have the laptop running windows 7 connected to the TV.So far I've been using just wifi, but when I try to stream movies from my desktop to the laptop I get freezes and glitches.I can't connect both my desktop and laptop wired to the ADSL router, since it's behind a wall I'm not allowed to drill trough.I have a spare network switch and cables, so I was thinking I could connect the ethernet adapters on the desktop and laptop together trough the switch, I'm just not sure how to configure the computers.
View 3 Replies
View Related
Sep 10, 2011
I have two LANs in my house, one 10/100 base and the other 10/100/1000, but one internet connection that I would like to have access to on both networks. Right now I have two Belkin routers for each network. In addition I have a Cisco 2600 and 3660. I know they are old, but they seem to be in operational order. Can I use those to combine to two networks? The only thing I want to maintain is the speed on the gig network, from the router to the PC's and devices.
View 6 Replies
View Related
Jan 26, 2011
do not have fast internet service so we must need to combine two or more different internet providers and get one speed kindly reply do you know any router/modem/switch which can do this for us.
View 2 Replies
View Related
Sep 7, 2011
how we can combine the LAN and Wimax connections? We are using here in our office one Fiber optic line that is running fine and we want to make up a backup connection of Wimax or wireless, how we can combine these two connections ,Moreover we are using here D-Link firewall and Netgear FS-726T Router.
View 3 Replies
View Related
Apr 22, 2013
I am looking to expand my network. I purchased a WD N900 router to replace my old Linksys E1200 .The internet connection is coming from the modem, into the WD N900 Router. The WD N900 has the printer hooked up to it, and 3 NAS, a computer and our magic jack. I ran 30 feet of network cable and routed the cable through the walls into the section of the house. I am looking to use my old Linksys E1200 to extend my network. I want to hook up the gaming systems (PS3, XBOX360) as well as the entertainment receiver to my Linksys router. What is the best setup? I am looking to be able to access the NAS from the WD N900 on our PS3 and Xbox360 so LAN-LAN looks like the way to go. I tried using the directions on Linksys site, but it doesn't seem to want to work. I test the network cable I ran through the walls, and it is getting a good signal. However when I hook it up to the Linksys E1200 and connect my lap top the Linksys E1200 to test it isn't working.
View 6 Replies
View Related
Jul 10, 2012
I have 2 campuses. I have my 5508 wireless controller working beautifully on my main campus using LDAP. (YAY!!) Now for my problem. My remote campus has 1310 bridges. I was able to successfully upgrade one of them to work with the controller, however, I can't get the other two bridges to talk to the one that I upgraded and I can't get them to upgrade, it indicates that they need to be the root. I have several small buildings on that remote campus, than need that remote bridging in order to be able to have network access.
View 7 Replies
View Related
Mar 20, 2013
I have a 5915 mobile router with software version 15.2(1r)GC1. Ports FE0/0 and FE0/1 are routed ports. Ports FE0/2 through FE0/4 are layer 2 switched ports. I'd like to put FE0/1 and FE0/2-4 in the same address space so that all four ports can be used as a single LAN and FE0/0 would be used as a WAN port. How do I configure the router to place FE0/1 and FE0/2-4 in the same LAN.
View 1 Replies
View Related
Nov 14, 2011
I have a relatively simple question. I would like to create a private network within a larger network, the private network having several clients. I would ideally like the router to appear as the only device on the larger network and all data to be sorted by the router to the clients in the private network.
Will the Netgear FVS318G be able to do that? It seems to have the necessary NAT options.
View 1 Replies
View Related
Apr 4, 2012
I have 4 computers (3 laptops, 1 desktop) in a shared office. We get internet access using their wireless network. All works fine. However, I need to share a printer amongst all of the computers. The printer is LAN enabled and I would normally just put all the PCs on a hub, together with the printer and share it that way. BUT my question is can we access the internet using the wireless network and the printer using a separate wired network at the same time?
View 7 Replies
View Related
Aug 21, 2012
This past weekend I went out of town and took my Windows 7 laptop with me -- since I returned home, it has been unable to connect to my wireless network. Other devices in my home connect to the network just fine, and the problem laptop has always been fine until now. My network card is an Atheros AR9285, and I'm attempting to connect to a Medialink router with WPA password protection and AES encryption.My wireless network icon in the task bar has a yellow sign with an exclamation point in it. It says "No Internet access."
View 1 Replies
View Related
Jan 25, 2011
I use my desktop for streaming media throughout the house. I found it was causing lag for gaming most likely because it was taking up all the bandwidth for the router. We had a 2nd router laying around as well as a 2nd wireless adapter so we set up a 2nd network that was not connected to the internet for strictly media streaming.I attempted to change the network settings so the internet connection appeared as a public network so that streaming of media was hopefully diverted to the non internet wireless adapter.I want a faster way of transferring large video files from my laptop to my desktop. I recently bought a crossover cable to do this through direct connection.Both use the same user name and password as well as run the same win 7 pro however the desktop is the 64 bit version. I set up both ipv4 with the same addresses.When it has worked I am only getting a connection speed of just over 10mb and once I connect the crossover cable between the computers it knocks out my internet connection on the wireless card.
View 5 Replies
View Related
Sep 2, 2012
I seem to be struggling to connect more than 4 cameras to my (ISP-supplied) modem/router by Netgear CGD24N via WPS. I'm on my 5th camera now (already have 3x 930L and 1x 942L) but the newest 942L just won't connect to the network at the moment and there's definitely no faults here as I swapped cameras today at the local retailer (and got an A3 942L!).I've even tried connecting the camera to my wireless extender (Netgear WN3000RP) but no luck there.
So far it has only worked twice for short periods of time (enough for me to configure the cameras) but since then I can't actually get it working. I've got a couple of spare wireless routers lying around too and should be receiving a DIR-600 soon (from the Netgear promotion in Australia) which could be useful?
View 1 Replies
View Related
Mar 26, 2011
I connected my camera to my router with a network cable. It is a DCS-2121, H/W Ver A2, with firmware 1.04_FR.It received an IP address and I could access it fine with a web browser.Then I configured it to work wireless.I disconnected the cable but the camera wasn't accessible.Since I couldn't find it I re-attached it with a network cable, but this didn't work.So I pressed the Reset button to start over again.However, now I cannot get it to work anymore. When I plug in the camera and have it connected with a network cable to the router the status light remains RED.When I plug it in without a network cable the status led remains RED.When I connect it with a network cable to a computer directly, the status led remains RED.I've tried changing the network settings of my router to use 192.168.0.x as range, but it makes no difference. In all cases the status indicator remains RED.
View 2 Replies
View Related
Jan 8, 2013
I'm experimenting/attempting to use a laptop as a network tap between my (DSL) modem and a wrt54gs by creating a bridge with two NICs in the laptop. My problem is I can't seem to get connectivity on the user end of the router. I can't ping the bridge from an end computer...
DHCP is disabled in the router, but even when manually configuring the IP address on an end computer and using the bridge as a default gateway I can't ping out.
Am I completely misunderstanding the purpose of a NIC bridge?
View 1 Replies
View Related
Feb 13, 2011
I want to setup a DC++ HUB for sharing data within the university local network. We have addresses of the form 172.31.*.*. These addressed are accessible within the university bu non routable outside on the internet. My plan is to setup a local HUB for DC++ for sharing data within the university intranet. So even if internet is unavailable data can be exchanged through LAN. This HUB must not be accessable outsied the university network.how should I do this all..implementing network sharing other than DC++. My basic idea is that everybody can share their data and the data is searchable from one common interface( Web interface is better option, if possible). And data featching should prefferably be from many hosts, using multiple connections so that speed can be improved..
View 4 Replies
View Related
Aug 16, 2011
I have a crappy router/modem from comcast with two windows machines and a linux web server connected. I also have another router, a Linksys WRT54G with DDWRT firmware with WAN connected to the modem/router. The linux web server has a static IP, configured with /etc/network/interfaces The network goes down randomly. Disconnecting and rebooting the linux web server usually fixes it. It's possible that the WRT54G could be at fault as well.The problem is that I just don't have any information on what is happening on the network. (Well even if I had the information, I'm not sure I would know what to do with it) I installed wireshark, I figure I should just leave it running until the network goes down, then I can go through the packets and see if I see anything weird?
View 4 Replies
View Related
Oct 8, 2012
i can search for networks. As you can tell i am currently on the internet on my laptop. I can search for the current network i am on through my adapter. I then connect to it. It says im connected to a unidentified network. It will not let me search the internet or anything else.
View 9 Replies
View Related
Mar 3, 2012
I have a home network running all Mac computers (though can run Windows VM if necessary) and a pair of USB printers. The wireless router and cable modem are in one room, but the printers are in another. I'd like to find the most practical way to add the printers to the local wireless network without sharing them from a computer. I've tried that for a while, but don't want to leave a laptop connected 24/7 just to enable wireless printing (rather defeats the purpose of a portable computer). I don't have any wired network lines in the home, and am not excited by the idea of running any cables.
View 5 Replies
View Related
Feb 28, 2012
My company have a Cisco PIX 525 firewall which is cater for NOC internal data network and also voice network, the subnet for data network is 192.168.2.0/24 and the subnet for voice network is 172.16.2.0/24. someday this NOC firewall was faulty. I was migrated the data network from this NOC firewall to the other temporary firewall just at the moment. And the voice network i migrated it from where it orginal at NOC firewall to a VOIP system which actually having a connection with my temporary firewall(This temporary FW only to take the traffic of data network). After the migration of data network from old firewall to temporary firewall and also the migration of voice network from old firewall to PABX system. The subnet for data network remain the same as 192.168.2.0/24, but the subnet of voice network i edit from 172.16.2.0/24 to 192.168. 3.0/24.Now when i want to use one Cisco router 2600 to replace this temporary firewall then facing problem at the voice network....The data network after migrated from temporary firewall to new 2600 is ok, users can browsing. But when i trying to at the same time when the data network been migrated , it will affect the voice network which still located at PABX. ..user cannot make call...I was thinking reason because this voice network which currently in 192.168.3.0/24 is tight to somewhere on the 192.168.x.x at the old firewall internetwork. So, when i migrated the data network over to new router, it will also cause the failure of voice even thought after i migrated the voice system to new router.So when i do the disaster recovery back to the temporary firewall for both data and voice. The voice is resuming to normal.
View 4 Replies
View Related
Apr 7, 2011
Camera set up with the Beta Mac wizard connected via ethernet on Airport base. Wireless security WPA2 Personal. Using DHCP. AirPort Utility 5.5.2, OSX 10.6.6.I can see the cam with the myDlink Lite iPhone (4) App when I am in my house with my wireless network. When I am out, away from my network, the App can't connect to the cam, tells me to check my network settings. I did the wps way and added the cam in the airport base utility *Access Control* tab but still doesn't work. Checked in the cam web page settings, can't figure out what the Pre-Shared Key is and where I get it/set it up in the airport utility...
View 1 Replies
View Related
Apr 5, 2011
I'm trying to configure my BRI interface in "network protocol-emulate network" and "layer1-emulate network" but i don't have this second command.Is someone have allready to that with this type of interface ?I've to configure this because the ISDN line of my telco is in user mode only.
View 5 Replies
View Related
Feb 18, 2013
What's the least expensive way to enable Guest Network authentication in a network with WLC 4404 controllers and no WCS? Management would like guests to register with a valid email address and enter a 'password du jour' to keep unauthenticated users from chewing up bandwith with automatic connections.
View 4 Replies
View Related
Oct 29, 2012
Having an issue with a Cisco Linksys E1500 on a home network. The device has a feature to provide a guest wireless network but the guest network can't get to the internet. A wired connection is fine, as is the normal wireless network but not the guest. The cheesy thing is, that it doesn't list an option for what type of wireless security protocol you want on the guest network. I'm assuming that it uses the same security protocol that the normal wireless network uses, but who knowsEspecially weird is that it asks you what password you want on the guest network but then the guest network show to be insecure when you try to connectthought maybe it was something funky with some of my configurations so I went ahead and factory defaulted it and just set it up with an insecure network for both the normal and guest networks. This didn't solve it. The guest network still couldn't get to the internet. In fact, the guest network can't even ping the router.
View 1 Replies
View Related
Aug 15, 2012
I currently have a BT Home Hub 3 router and an Ubiquiti Power AP N.What I am trying to do is use the Ubiquiti access point as the main device for all connections in my house (ethernet and wireless) so that I can use the QoS settings etc. I basically want the Home Hub router to play as little role as possible in the network except for providing the ADSL internet connection.I know I need to enable DHCP on the access point but everytime I do so the devices connected to the access point lose internet connection.(BTW I have an ethernet cable connected from one of the routers LAN ports into the access point's WAN port)
View 2 Replies
View Related
