Combining Two Totally Different Networks?
Aug 10, 2012
I am trying to work out a way of combining two networks from two (Internet Service Providers or ISPs. One network is for Internet, and the second one is for CCTV cameras. Both networks exist and are working independently, each with its own servers. I want to re-design the whole system such that at any one time t, a supervisor with an Internet connection in his office can be able to see what is happening on cctv cameras without contacting the cctv personnel.
View 6 Replies
ADVERTISEMENT
Aug 3, 2011
i have have lan in the office(internet installed) and i want to combine it with the lan in the computer lab for internet .i dont want to use cable as it might be too long .
View 1 Replies
View Related
Mar 10, 2012
Recently I have had a thought about changing the networking around my house.urrently we have two routers as my house is very tall and not very wide, they are called JohnsonNet1 and JohnsonNet2. Is there a way to get them to run one network called JohnsonNet?
View 3 Replies
View Related
Dec 13, 2012
I'd like to know if there is some easy-ish way to combine wifi and ethernet in a network.Since a picture says a thousand words, here's what I want to achieve:I use the desktop computer as a file and media server using windows home group.I have the laptop running windows 7 connected to the TV.So far I've been using just wifi, but when I try to stream movies from my desktop to the laptop I get freezes and glitches.I can't connect both my desktop and laptop wired to the ADSL router, since it's behind a wall I'm not allowed to drill trough.I have a spare network switch and cables, so I was thinking I could connect the ethernet adapters on the desktop and laptop together trough the switch, I'm just not sure how to configure the computers.
View 3 Replies
View Related
Oct 23, 2010
I have tried to upgrade from 2.0.2.1 ever since 2.0.3.3 was released back in July. The firmware image file has remained the same, so I don't think they've ever changed it from the original July release.The download and installation go fine, I even reset to factory defaults. The problem is that several menu selections are broken, and don't allow you to save your choices, i.e, you can't even rename your SSID. You can type it in a Apply, but the fields just reset. I figured this would be fixed with a minor update to 2.0.3.3, but we are now several months since original release and nothing has changed. I have tried this firmware at least three times now. I have not bothered lately, because I don't want to waste another 30 minutes trying it and reverting back to 2.0.2.1 if this newest firmware is not going to work.
View 3 Replies
View Related
Sep 6, 2011
Can we disable wireless totally in E4200 and just use wired connections? I didn't see any configuration for that, but just in case I missed it. I'm also aware we can disable SSID Broadcast.
View 1 Replies
View Related
Mar 18, 2012
I am running Ubuntu 10.04 on my Acer Aspire One netbook.The wireless connection works great, but the wired is totally dead.
When I plug the Ethernet wire, the little led next to the port doesn't blink.
If I do ifconfig, this is the output:
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1659 errors:0 dropped:0 overruns:0 frame:0
TX packets:1659 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
[code]....
There is no eth0. Is that normal?
In the "Network Connections" GUI there is an entry "Wired connection 1", its "MAC address" field is blank.
How can I make the wired connection work?
View 2 Replies
View Related
Jan 25, 2011
A query here with regards to Wireless isolation between SSID and wireless isolation within SSID.If we have 2 SSID, eg. InternalSSID, GuestSSID on AP1.Both SSID are set to Enabled for isolation between SSID, and within SSID, that would mean all machines connected thro' this AP1, would be isolated from one another.
1) If there's 1 laptop that connects to another AP, lets call it AP2, (doesn't have isolation function) on ssid01. Would this laptop still be isolated from those that connects to the first AP?
2) If there are wired PCs connected to the router. And the 2 APs are connected to the same router. Would the machines connected thro' the AP1 on either InternalSSID, GuestSSID be able to access those wired PCs? (My assumption is yes.)
3) Is there a quick and efficient way to setup on WRVS4400N to isolate GuestSSID totally from InternalSSID, and wired PCs. InternalSSID and wired PCs should be allowed to 'see' one another.
The challenge here is that, the network points are all installed already. Both AP are connecting thro' 2 separate unmanaged switch together with a couple of other PCs. 1 Port on the unmanaged switch, each,connects to the router.
View 1 Replies
View Related
Nov 9, 2012
At my office, I have two ISPs. Here is the configuration:
ISP1:
- Firewall > Switch > LAN 192.168.10.xxx
- Wireless Router1 Connected to Switch above > WLAN 192.168.10.xxx
ISP2:
- Wireless Router2 connected directly to main RJ-45 jack coming from ISP2
- WLAN 192.168.1.xxx
ISP1 is a T1 line bundle. It was slow for our wireless users in the office. So we went ahead and signed up a cable internet connection from ISP2. The one and only one device connected to ISP2 jack is a wireless router (Wireless Router2).People who are connected to Wireless Router2 (192.168.1.xxx) can't see anything in our LAN and WLAN (192.168.10.xxx); for example Domain Controller, Printers, File Server, etc.How can I configure ISP2 setup so that both routers (or you can say both ISPs) are on the same network 192.168.10.xxx? I want to do this so everyone is on the same network and can see everything.
View 5 Replies
View Related
Jun 17, 2012
The fastest dsl speeds here is 1.5mbpsand I need something around 3mbps+. I'm curious if I could buy two 1.5 connections from my ISP and connect them both into a router and then hook a switch up to it and connect my PCs and everything to it to get 3 or if I would still just get the 1.5?
View 4 Replies
View Related
Oct 28, 2011
I have two different Internets from different ISPs can I intgrate in one to increase total bandwidth. (means 2+2=4)
View 1 Replies
View Related
Mar 8, 2013
I have 2 x PC and 3 x laptops. Currently the 2xPCs are connected by ethernet LAN and a printer through a 5-port switch. Would it be possible to add a router into the system somewhere so that the 3xlatops can access the network?
View 2 Replies
View Related
Nov 30, 2011
I am getting ready to move into new digs and wanting to set up my network. Main house cable internet will come in with modum to a dlink router for both wired and wireless. desktop and a magic jack wired into router wireless for ipad and laptop. then run wire to workshop about 100' from house where a second magic jack and desktop will be set up (small biz out of workshop). I am pretty sure that the range of the router for wireless will reach to workshop fine for ipad but if not I will need to put a wireless up there tooext kids have a laptop running windows 7 but kids being kids and having had problems with self control on net in past I want to be able to make sure that I can turn them off from net when needed because
1. I do not want them running me past the data limits imposed by cable company and
2. keep them from sites such as those which got them in trouble in the past (kids are older and bought laptop for selves and pop will not go along with me confiscating it if they abuse internet privileges
View 1 Replies
View Related
Sep 10, 2011
I have two LANs in my house, one 10/100 base and the other 10/100/1000, but one internet connection that I would like to have access to on both networks. Right now I have two Belkin routers for each network. In addition I have a Cisco 2600 and 3660. I know they are old, but they seem to be in operational order. Can I use those to combine to two networks? The only thing I want to maintain is the speed on the gig network, from the router to the PC's and devices.
View 6 Replies
View Related
Apr 3, 2013
however recently when i check my internet usage log on my wireless company (Rogers) the usage is totally off from what my bandwidth tracker shows me. So i decide to turn off my wifi and see what happens, there has always been this weird wifi connection appearing whenever my wifi appears, then afterwards when i turn off my wifi the suspicious wifi connections disappear. is this possible that someone is using our wifi? i might just be overreacting but it has brought me to concern that if the usage continues my family will have to end up paying over $30 for extra internet use. it is very frustrating me because when i check my DHCP client table it only shows 3 connection, ethernet - my desktop which is not turned on, 2 wireless connection - my laptop and my sister's laptop.
View 6 Replies
View Related
Jan 26, 2011
do not have fast internet service so we must need to combine two or more different internet providers and get one speed kindly reply do you know any router/modem/switch which can do this for us.
View 2 Replies
View Related
Sep 7, 2011
how we can combine the LAN and Wimax connections? We are using here in our office one Fiber optic line that is running fine and we want to make up a backup connection of Wimax or wireless, how we can combine these two connections ,Moreover we are using here D-Link firewall and Netgear FS-726T Router.
View 3 Replies
View Related
Jun 17, 2012
How to make 2 (or more) connections work together and increase your final download and upload.You will need the following items
- A PC or server connected at high speed that is greater or equal to both connections speed (from a data center, You can get some very cheap $30 a month, a VPS can be good enough)
- 2 Internet connections at your home (DSL + cable for example)
- A router that supports dual WAN
- A Magic software that I can write for example
So what is needed is a way to split your data using some technology like the concept of RAID 0 (MAGIC software will be here used) and then use both IPs through the router to send the data to the server which will handle your request (it is possible to have a good usage of VPN here to forward all your traffic to the server without worrying about doing much work here). After that on the server you can reverse your RAID 0 data (using the same MAGIC software) and forward your request to the destination site that you want to visit. Same way the downloading will happen when the server receives a reply from the destination site, it will split the data using same RAID 0 technology (using the MAGIC software) and then send the data to both of your IPs. After that on your side you combine the received data (using the software) and you are done. Of course I do prefer the data splitting to happen using some hardware like a router with MAGIC software as it will be much more effective.
View 3 Replies
View Related
Apr 22, 2013
I am looking to expand my network. I purchased a WD N900 router to replace my old Linksys E1200 .The internet connection is coming from the modem, into the WD N900 Router. The WD N900 has the printer hooked up to it, and 3 NAS, a computer and our magic jack. I ran 30 feet of network cable and routed the cable through the walls into the section of the house. I am looking to use my old Linksys E1200 to extend my network. I want to hook up the gaming systems (PS3, XBOX360) as well as the entertainment receiver to my Linksys router. What is the best setup? I am looking to be able to access the NAS from the WD N900 on our PS3 and Xbox360 so LAN-LAN looks like the way to go. I tried using the directions on Linksys site, but it doesn't seem to want to work. I test the network cable I ran through the walls, and it is getting a good signal. However when I hook it up to the Linksys E1200 and connect my lap top the Linksys E1200 to test it isn't working.
View 6 Replies
View Related
Jul 10, 2012
I have 2 campuses. I have my 5508 wireless controller working beautifully on my main campus using LDAP. (YAY!!) Now for my problem. My remote campus has 1310 bridges. I was able to successfully upgrade one of them to work with the controller, however, I can't get the other two bridges to talk to the one that I upgraded and I can't get them to upgrade, it indicates that they need to be the root. I have several small buildings on that remote campus, than need that remote bridging in order to be able to have network access.
View 7 Replies
View Related
Mar 20, 2013
I have a 5915 mobile router with software version 15.2(1r)GC1. Ports FE0/0 and FE0/1 are routed ports. Ports FE0/2 through FE0/4 are layer 2 switched ports. I'd like to put FE0/1 and FE0/2-4 in the same address space so that all four ports can be used as a single LAN and FE0/0 would be used as a WAN port. How do I configure the router to place FE0/1 and FE0/2-4 in the same LAN.
View 1 Replies
View Related
Apr 1, 2012
My dad has a business he runs on our network that everyone in the house uses for general needs. I am a gamer and often want to host servers for my friends. This requires that I have ports opened on the router, which I cannot do as I don't have access to change the network. Is it possible to create 2 networks on the same ISP, and if so how would you do it?,I have my current network running on an Apple Time Capsule with AirPorts around my house acting as extenders.
View 5 Replies
View Related
Jan 3, 2013
So I moved my modem & router upstairs and for some reason my home network doesn't connect to the internet but I can set up a separate connection. Seems wrong....should just be one. (And my internet connection bars in the bottom corner have an exclamation mark. Is it because this computer was on the network wirelessly and now it isn't?) Was going to just reset the router.
View 4 Replies
View Related
Aug 16, 2011
data card n a cable network at same time?
View 2 Replies
View Related
May 1, 2011
I have 2 PCs at home. Lets name one of them as PC 1 which has two onboard LAN Ports. Now, PC1 has to connect to PC 2, just a home network for easy transfer on files and stuff, and it also has to connect to the internet via a network. The problem is both of them use static ip and when I tried configuring PC 1, it allows only one of the connections to remain active. I simply get an error otherwise saying "Multiple Gateways" will cause conflict and I will be stuck with only one connection. After much study I "somehow" connected both. I vaguely remember using the "route" command in cmd to achieve this. But now, I am getting an error when I try to access PC 2. My Internet is working fine.I am not network savvy at all. run both these connections from PC 1. I should add that I can in no way modify/change/or do anything else to my internet network since it is out of my control. I can do anything, however, for my Home Lan with PC 2. I run windows 7. Both the connections are wired, by the way.
View 2 Replies
View Related
Aug 15, 2011
We have three computers (one of which acts as a file server) plugged directly into an internal office network. Then we have another such connection leading to the WAN port of a router which shares a single connection among another 5 or so computers & laptops. So the WAN connection is providing internet access AND access to the file server.
Since upgrading to a new router, it is now not possible to "see" the file server from the computers connected to the router, although the internet can still be accessed without a hitch. This has now become infuriating as I've spent several hours changing all possible router & IP settings to no avail.
View 6 Replies
View Related
Sep 10, 2012
This has me baffled: since the weekend I've been unable to connect to certain networks. Previously I could connect to any available network as normal, but all of a sudden I can't get onto certain network connections despite the fact they are available and at full signal strength. Some connections are fine, others are not.Something odd happens when I unsuccessfully try to connect: a window pops up but in the blink of an eye disappears again before I have time to register whether it's an error message or what.I've checked for Window updates and am fully updated, I've run my virus scan (Microsoft Security Essentials), and I've performed Windows Network Diagnosis to no avail.otel overseas and am now feeling the problem as I can't get onto the hotel's free wifi and am having to use my iPhone as a personal hotspot which is costing me a bomb
View 4 Replies
View Related
Feb 14, 2011
I've been looking around for more information on this topic but I couldn't find quite the specifics I'm looking for.In the most basic text, I want to connect two networks together via the internet and VPN. I currently have two Windows 2k8 Servers housed at both locations. I've tried to do as much as I could myself but clients on both sides cannot access each other.I set-up the Remote Router function on both Servers and connected them but I still cannot ping or access any of the remote resources on that network.
View 1 Replies
View Related
Sep 2, 2012
Recently, I upgraded my PC into basically a completely new machine. Because the harddrive that I planned on using was IDE, and my IDE-Sata adapters weren't being recognized on BIO, I used a fresh sata harddrive and a copy of Windows XP Professional.
It booted fine, all parts recognized, only now I cant connect to any LAN networks. I only get the option for VGN, Broadband and Dial-up networking. Using a laptop at the moment
I've tried two different usb adapters, and connecting the LAN cable directly into the PC. The cable works on another desktop in the house, but my PC wouldnt let me make the LAN network.
View 1 Replies
View Related
Dec 26, 2011
I've had my Westell wired to my PC forever--well, for a couple of years--and I just got my wife a tablet.How to configure it/set up,my wireless network in a smart way that will keep others out. I see a WEP on the bottom, but... I kinda dumb about these things.I know there's a Wizard available in my XP control panel.
View 2 Replies
View Related
Aug 23, 2012
I have a one ISP connection which is connected through �US_Robotics_Modem�. By default its Ip address is 192.168.1.1 and Iam running a DHCP start from 192.168.1.2 to 192.168.1.254. This is my first and main Network.Now I want to configure different Four networks using the same ADSL connection. For example:
Main Network Ip: 192.168.1.1, 255.255.255.0
Second Network: 192.168.2.1, 255.255.255.0, DHCP starts from 192.168.2.2 to 192.168.2.254
[code]....
How can I connect Internet on all others Networks using the Main Network?
View 1 Replies
View Related
Jul 3, 2011
The laptop can access either the internet wirelessly – via the internet connected router OR the nas wirelessly – via the second router. [have to change the wireless network that it attaches to.The laptop can also access the desktop, regardless of which of the 2 wireless networks i attach to.My question is, how do i set up my network more efficiently to enable access to all parts of it and the internet simultaneously from the laptop via wireless?
View 5 Replies
View Related
May 15, 2011
I have two router as well as two switch. 1st router is Dlink's router, I used this router for sharing files and folders and also connect to NET. And 2nd router used for Windows Media Encoder to upload my audio data to other computer.My first router is connected with a 16 port DLink switch, and also 2nd router is connect with another 8 Port Dlink router. Now, 1 computer has two LAN card and it connect with both router through switch. But both is not working at a time, but if i disable one LAN another is worked and vice versa.
View 2 Replies
View Related
