Connect Blackberry Torch Using Wifi?
Dec 3, 2011I am trying to understand how WiFi works - I have shaw wireless in my home - does that mean I can connect my blackberry torch using WiFi
View 1 RepliesI am trying to understand how WiFi works - I have shaw wireless in my home - does that mean I can connect my blackberry torch using WiFi
View 1 RepliesI have installed the Phone Remote software [URL] on the torch and playbook but am not able to pair them together.The FAQ's and directions have been followed painstakingly but have not any success. My router is knowledge is basic but read through the manual and have been searching the net for answers. I have uPNP enabled and no firewall.
View 2 Replies View Relatedi bought the Dir 615 a few months ago so that my tenants (i have a triplex) can use the net. it's been great. I recently got a new blackberry bold 9700 and I can't connect it. It finds the router and saves it, but I can't connect. Even when I put in the WEP Key.
View 10 Replies View Relatedwhy my Blackberry wifi doesnt find my pc wireless. I have Blackberry curve 9300 3G. OS 6
View 1 Replies View Relatedhow do I link up my blackberry torch And my ps3 with the wifi.I'm not get connected
View 1 Replies View Relatediphone and android app but no blackberry.
View 3 Replies View Relatedfirmware v.2.21 working well with laptop for 5 years. unable to connect b/b rim playbook last week. tried a couple of sessions with dlink tech support. turned off all other 2.4 ghz devices. would firmware upgrade 3.13 fix this issue?
View 3 Replies View Relatedi contact Cisco support. They told me that VPN between a Blackberry and ASA5000 is not supported. Today 14 fév 2013 they don't have any date on when Anyconnect for Blackberry will be available. So we cannot use a Z10 because exchange server is beind the ASA. Protected with the ASA. Apple and Android work well with the AnyConnect and certificat.URL
View 2 Replies View RelatedI am trying to connect to VPN using Blackberry Playbook. how to configure this VPN using ASA 5520.
View 1 Replies View RelatedHow to do tethering using Blackberry 9790 n Samsung notebook NP500
View 2 Replies View RelatedI'm working on setting up my Blackberry Playbook to access the network over our IPsec VPN however so far I have had no luck. I'm also posting this on the Blackberry playbook support forum.
Settings on BlackBerry Playbook
Server Address: My IP Address
Authentication type: XAuth-PSK
Group Username: remote.com
[Code].....
I have an issue when I´m trying to authenticate my iphone&blackberry device with ASA 5520 using certificates. It seems that certificates are working fine, pass the ike phase 1 but never complete the phase 2. When i use pres hared keys everything works fine with both devices.
If you consider necessary, i can provide my current configuration in asa.
My friend was able to access my internet connection via my guest account WITHOUT having to enter the guest password. He was able to connect using a samsung galaxy phone with the android OS. However, when I connected to my guest account using my blackberry, I WAS asked for the guest account password.
View 3 Replies View RelatedI have netgear router WNR 1000 v2. I'm not able to connect to Apple ipod. The password is not been accepted.
View 2 Replies View RelatedRegion : United Kingdom
Model : TD-W8960N
Hardware Version : V1
Firmware Version :
ISP : Unforced 9
I am struggling to get my blackberry Z10 to connect to the router.
I connect to my RVS4000 VPN router using QuickVPN. Very useful.
Sometimes I am not near my laptop and need to check data.
Is there a QuickVPN or compatible client for a BlackBerry Torch 9850, even if it's only functional when connected to WiFi?
I thought I had the configuration to allow bi-directional traffic for my Blackberry server. I have a second fw with the same config and it worked on that one. But right now, my blackberry server is down, and all the users are upset.
ASA Version 8.2(2)
!
hostname asa5505
[Code]......
in my company we have 40 cisco aironet 1100 without controller, the signal is good with laptops but is too weak with the iphone's ipads and blackberry.
View 12 Replies View RelatedIn my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1
IC : 4216A-IR601
H/W Ver:A1
F.W Ver:1.00 NA
when i connect my sylvania netbook to my wireless internet it says connected, excellent signal but when i try to pull up a web page it says can not connect to server...
View 1 Replies View RelatedAny way to connect a wifi usb to a wireless router for better wifi connect?? i have wifi but it only gets in the room of the house im in and want it to work though out the house not just one room
View 1 Replies View RelatedHave a router called WBR-T2 Wireless ADSL 2+ Gateway. Have been using it for around a year. Has been working great until now. When I attempt to connect to the network using any of the devices in the house (iPod, Laptop and Xbox) the connection is never made despite the connection being visible when searching. The following router lights are ON or OFF:
The power is ON
SYS is ON
DSL is ON
WLAN is ON
USB is OFF
LAN 1, 2, 3, 4 are OFF
I've had this setup for years now, custom ssid and password on my router, altho yesterday my pc said i was connected to "Slayer 2" (my ssid is Slayer) i found it weird so i went to wifi settings and i deleted all the ssids in an attempt to re-connect to "Slayer" thing is now, even tho my pc detects my ssid, when i try to connect to it, it says password is wrong. this is very weird cuz i can connect to it on my portable and tablet.My pc stills connects to other ssids with np, so i think the prob is not my network adapter.I've tried to change the ssid, didnt work.tried to change the password and didnt work either.googled a bit and did the winsock reset commands, didnt work either.currently posting this from my pc which has now an ethernet cable coming from the router.
View 19 Replies View Relatedi'm trying to hook up the wii with wireless connections but it's just not working.. what should i do?
View 1 Replies View RelatedSo recently it just kind of cut out on me. I was connected to both at one point, and now whenever I connect to ethernet, I cannot connect to wifi either as it makes ethernet the main source. Currently in college so I do not have access to the routers/modems/servers. I have done a chkdisc run, tried different ethercords (Glowing), antivirus, reinstalled drivers. Whenever I run a diagnostic on both the wifi/ethernet it blames it on the DNS servers, which I do not understand why since I was connected to them just the other day.
View 11 Replies View RelatedWhy doesn't my ds connect to wifi?
View 12 Replies View RelatedProblem: My USB wireless network adapter gets a limited connectivity message in the notification tray but no packets are being sent or recieved. It does, however, recognize my network on the available connections list - so it's not totally dead. When I switch to a wired connection I get "no connections available". This is the case even on a new PCI ethernet controller.
Details:Problem happened after installing new memory and clearing the CMOS (to troubleshoot a problem). LAN is working on a fresh Windows install on a different hard drive. Therefore, I've rulled out a hardware failure as the source of the problem.
Device Manager does not list any problems. Everything is recognized. In Network Connections, three Local Area Connections are present and Windows recognizes when the ethernet cable is plugged in. The hardware lights on the wired NIC function properly.Windows Network Diagnostis reports that "Windows couldn't automatically bind the IP protocol stack to the network adapter" and pings to IP addresses like 192.0.0.1 or 192.168.0.1 get a "transmit failed. General failure" message.Everything is set to obtain IP addresses and DNS automatically. Also, I haven't knowingly changed any settings from the time it was working until it/they stopped working.
Ipconfig doesn't list any information. It just reads: Windows IP Configuration
Host Name..............: Monolith
Primary Dns Suffix...:
Node Type...............: Hybrid[code]....
Where I'm at: I can't figure out why both NICs would be giving me trouble at the same time. It seems like Windows just can't handle anything trying to use TCP/IP no matter what I throw at it. Despite Windows knowing about the hardware and thinking everything is fine, it seems like it can't access it correctly to connect.
It connects fine with an ethernet cable but, my wireless network shows up nowhere on my computer.
View 11 Replies View RelatedI have just got USB wi-fi for my desktop computer (which has an internet connection). I installed the drivers and hardware. I set up an ad hoc connection to my laptop with internet sharing enabled on the desktop, however though they seemed to connect, the laptop could not access the net.(Both computers are running Win XP Pro.)
View 10 Replies View RelatedI can not connect any equipment by WIFI. Tablet & Ipod. Equipment recognize a network but doesn,t connect.
View 1 Replies View RelatedAfter weeks of having internet problems, the internet is up and running again.for everyone other than me. i can connect via cable, which i am doing now, but cannot connect to wifi. my landlord had attempted to change the key at some point, so i had typed in that one, but now i cannot seem to get rid of it. the original key seems to work for the 2 other computers in the house that have wifi (both MACs) but not for me. when i attempt to connect i type in the original key and it "thinks about it" and says that it will be automatically connected, but never connects. i get no message saying that any information is wrong or the key is wrong.but when i go into the advanced settings and go into the properties of this wifi, it seems to remember a shorter key.
View 9 Replies View RelatedI have an Acer laptop running Win7. I have a wireless router.In the last few months I find when I open my laptop from hibernation I can't get it to connect to Wi-Fi. Sometimes troubleshoot does it. Sometimes not. Sometimes trying to connect to another router in the area and failing does it. Other times not. I've tried looking on device manager and sometimes the mini port has a yellow warning triangle but other times it doesn't.
View 4 Replies View RelatedI juWiFi Router, I can connect 1 computer to it, but when I try to connect another device (such as a second computer or cell phones) I get a message that the security key is a mismatch on the other devices. Is this a problem with the system, or a problem with the first computer I connected?
View 1 Replies View Related