Linksys Wireless Router :: How Compatible Is Wrt610n V2 With Plwk400 N Wifi Extender Kit
Jan 4, 2013How compatible is my WRT610N V2 with your Linksys PLWK400 Wireless-N Wi-Fi Extender Kit?
View 2 Replies
ADVERTISEMENT
Linksys Access Point :: Wifi Extender Compatible With Wag120n?
Dec 21, 2012I need a wifi extender for wag 120n , and i want to connect it with WDSI use wag 120n as main and only modem and access pointWhat is the best and cheapest device for me?
View 1 Replies View RelatedLinksys Wireless Router :: Can WBR-1310 Works As An Extender For WRT610N
Oct 21, 2011I have the WRT610N and would like to add an extender for the wifi in my house.Does the WBR-1310 work? If yes, how do I set that up? If it doesn't work, any device that can give me a better range in the house?
View 4 Replies View RelatedLinksys Wireless Router :: Way To Set-Up E4200v2 And PLWK400 At Home
Aug 16, 2012 I am wondering what is the optimal way to set-up my E4200v2 and PLWK400 at home? I have several devices (laptops, tablets, phones) that connect on .11g and .11n.
My current set-up:
E4200v2: 5ghz - Wireless-N only (SSID home-n), 2.4ghz - Wireless-B/G only (SSID home-g)
PLWK400: SSID home-ext (separate part of the home)
I am using WPA2 Personal security if that makes a different. One question would it be "better" to have the same SSID for all 3 wireless settings (5ghz, 2.4ghz, and PLWK400)? Would the various devices know which frequency to switch to for best speed and range?
Linksys Wireless Router :: E1550 Connecting To Wifi Extender?
May 14, 2012My objective is to use the USB port on the E1550 to share an external hard drive for my family's shared media files.I have moved into a rental home with little cat5 wiring. Internet service is Uverse.Given the wiring situation, I bought a netgear universal dual band range extender which connects wirelessly to the uverse router in another room. My home office equipment (computer, printer) are wired into the netgear. All of that works fine. The netgear is 192.168.1.66. The computer is 192.168.1.128. So, I wanted to add the E1550 into my network. I can see it as an attached device on the Netgear's admin page, but cisco connect and a direct ip http://192.168.1.68 does not resolve. I have the e1550 connected via a lan port on the netgear extender (there is no other option). I have gone from that lan port to the internet port on the e1550. I have done so with a staight Cat5 cable and with what I believe should be a cross-over. In both situations, I see the router via the netgear admin page but can not connect to it. I'd prefer not the hang my usb drive off of my computer because it if gets turned off or reboots due to a MS Windows auto update, it leaves the rest of the house with no shared media during that process.
View 1 Replies View RelatedLinksys Wireless Router :: Wrt610n Lost Wifi After Firmware Upgrade
Apr 15, 2013For some strange reason I was looking at my router and wanted to check and see if there were any firmware upgrades available. I was not having any issues. I noticed that there was an upgrade and one of the notes indicated that it fixed some speed issues. I saved my config before upgrading and reloaded config after upgrading the firmware.Since the upgrade, I have lost connectivity to my printer and have intermittent issues with my remote dvr.The printer is connected wirelessly thru a wet610n.The dvr is connected wirelessly thru a wet610n.I can ping the printer, and I can access the printers web page. The issues appears to be two-way communication.The printer is an HP Officejet 6500a and allows eprint. The printer can no longer contact the eprint server.I have turned off my firewall on my computer and still cannot pring (why would I have to change this anyway, it worked before.)I use a ddns server for software access to my dvr. It worked flawlessly before.Now, the dvr is visible sometimes and sometimes it's not.
My wrt610n is v2 hardware.I called for support, but of course since the warranty has ended, support has ended unless you pay.Nothing like a firmware fix to break your router.I am very disappointed with the upgrade and the support provided.
Will Any Wireless Router Work As A Wifi Extender
Jan 5, 2013buying a wireless router to use as a wifi extender as the signal is weak upstairs. At the moment my pc upstairs is connected by ethernet cable, I'm thinking of connecting a router upstairs to this ethernet cable to have good wifi upstairs. And my pc does have wifi so I will use that.
View 1 Replies View RelatedWifi Range Extender Versus Wireless Router?
Aug 16, 2011I have a wireless modem but its a sucky one. It was one of those free ones from verizon. Anyways, I don't get good signal in certain places in my house, so i am interested in knowing which would be better a wifi range extender or a good wireless modem.
View 1 Replies View RelatedBelkin Routers :: Universal Ranger Extender F5D7132 Is Compatible With 24dbi Antenna?
Oct 22, 2012I would like to know if my Universal Ranger Extender F5D7132 is compatible with a 24dbi antenna? What is it power level (mw)?
View 2 Replies View RelatedWifi Extender Taking Over Router
Jun 1, 2012I installed a tp link extender to boost wifi at home (2 storey) and since then I have noticed that upstairs where the router is installed the signal is weaker than downstairs where the extender is located.
View 2 Replies View RelatedWifi Extender Or Upgrade To N Router?
Dec 29, 2012At the moment the Wireless Router is located in my bedroom which is 12 meters from the living room where the phone line is. I basically have one phone line extension from the telephone line to my bedroom where I've plugged in the ADSL filter. The modem part plugs into the actual router and the telephone line is then extended back to the living room with a second extension cable.This is because my PC is in my bedroom. Problem with this is the fact that there are extension cables get in the way when moving furniture around and also hang from the ceiling in the corridor.What I'd like to do is have a WiFi dongle for my PC and move the router to the living room. Now my second problem is that my phone gets a very weak WiFi signal once you go to the living room so I imagine if I moved the router to there then I would barely get a signal in my bedroom. I have two options to solve this:
(1) Use a WiFi extender in between my room and the router and then a dongle for my computer
(2) Upgrade my current G router to an N router. Problem is I'm not too sure the signal will reach my room. There's a 12 meter range from the living room to my bedroom btw.url...
Will Wifi Range Extender Affect Signal Of Router
Jan 22, 2011Will a Wi-Fi range extender affect (i.e., reduce) the signal of the router? How does the throughput signal compare between where it originates and where it ends?
View 2 Replies View RelatedLinksys Wireless Router :: WRT610N Isn't Able To Connect At All
Dec 25, 2009I purchased a WRT610N router early this month, the wireless network was working completely fine when I first set it up. Today I tried to connect my laptop to my wireless network. The laptop isn't able to connect at all. I also got a Sony PSP which has WLAN on and that saying it cannot detect any access point which would be my router.
View 3 Replies View RelatedLinksys Wireless Router :: Getting Multiple 360's On WRT610N?
Jul 12, 2011How can I open the Nat for both systems on my single router.
View 2 Replies View RelatedLinksys Wireless Router :: WRT610N And PoE For WAP4410N
Jul 26, 2011I was told that this router would push the PoE to the WAP4410N. I hooked the AP up to port 1 and no lights or anything... The network is all cat6, patch cords are cat6 shielded if this matters at all... what am I missing.
View 3 Replies View RelatedLinksys Wireless Router :: USB Storage On WRT610N?
Jul 1, 2011Is it possible to have 2 hard drives connected to a WRT610N perhaps connected through a USB hub?
View 1 Replies View RelatedLinksys Wireless Router :: WRT610N - Block All XXX URL's?
Dec 20, 2011I have the Linksys WRT610N wireless router and would like to know if it is possible to block all domains ending in .XXX? The access restrictions let you type in a 'specific' URL, but using a generic domain name doesn't seem to work. I basically want to block all access to any URL that ends in .XXX.
View 5 Replies View RelatedLinksys Wireless Router :: WRT610N V2 Not Broadcasting 5 Ghz?
May 13, 2012I just bought a certified refurbished router. The model is WRT610N-RM. Where's what I've done:
1. Downloaded newest firmware from the site using old router, Then disconnected. Connected a lan cable to the new router. Powered up the router. Held down reset untill the light blinks. Went to the browser and typed 192.168.1.1. Entered password to go into router and upgraded firmware. 2. 5 Ghz Settings: Went to Wireless menu. Selected "manual", mode is "mixed" (If i chose N only for 5 Ghz, then It won't save my setting for internet security. Instead it will be "disable" no matter what". The rest was default. SSID is enabled. Then I set up the 2.5 Ghz. I have 3 other computers with N wireless card. Some others have G, however when I viewed available networks, I only see the 2.4 Ghz ssid. I tried to reboot and unplug power for 10 seconds, but no luck seeing the 5 Ghz.
Linksys Wireless Router :: Get Open Nat For Mw3 On Ps3 WRT610n?
Nov 15, 2011ive tried all types of things i read online and it is stuck on moderate no matter what i do, im hooked into router directly, when i hook directly into modem it switches to open.
View 2 Replies View RelatedWireless :: Linksys Router Compatible With MiFi2200?
Feb 26, 2011i have MiFi2200 internet service .when router is down stairs in main part of house , signal is weak upstairs on desktop. i am using Linksys speedbooster on desktop to receive wifi signal. what can i do to increase MiFi signal to upstairs desktop computer?
View 1 Replies View RelatedLinksys Wireless Router :: WRT610N - Way To Set Up Port Forwarding
Jun 26, 2012I am finding it impossible to set up port forwarding. No matter what I do I remain completely stealthed when I do a port probe via [URL]... The only way I seem to be able to open a port is if I enable remote management. When I do that, whatever port I specifiy as the remote management port is then fully open. Obviously, I can't leave a port exposed like this and, anyway, I need to open multiple ports for my purposes.
View 9 Replies View RelatedLinksys Wireless Router :: WRT610N Seems To Lose Radio
Mar 18, 2012I have had no problems with my WRt610N fo 2 years. Yesterday a problem occured and today again. Namely, I opened my laptop (the lid) and suddenly it could not see my network (SSID) among the rest of the neighbouring ones. The WiFi indicator in the tray showed the yellow "!". Since I have another (secondary) router wired to the primary (WRT610N) I tried and succeeded to connect to it (same SSID, but type "g").
Today the same situation. This is the straneg thing - if I 1st connect to the "g" router after a while the WIn7 reports my SSID being of type "gn" meaning it now sees the primary WRT610N. If I switch off the secondary the netowork is maintained by the primary router showing "n". It seems like my laptop cannot see my router (but can see all other networks) until it 1sr connects to the secondary, and afterwards it sees the primary router and can stay with it.
Linksys Wireless Router :: Reading WRT610N Logs?
Feb 4, 2010Is LinkLogger the only option for reading logs on the WRT610Nv2? I read about Linksys's own software called LogViewer 1.14 but I can't find it.
View 3 Replies View RelatedLinksys Wireless Router :: Ports Not Forwarding On Wrt610n
Jun 12, 2012I've been really stumped when I decided to start using xbox live. When ever I try to join my friends party I am slammed with a NAT error. For years now I have not been able to forward ports at all. Any port checkers come back with unable to contact your router.I am fairly certain its the router because, I directly plugged my 360 into my modem and everything worked like a charm.I've read on a similar post found here "Similar post" that updating the firmware might fix the issue?
View 9 Replies View RelatedLinksys Wireless Router :: WRT610N URL Filtering Not Working
Aug 3, 2012I am trying to filter a URL, facebook and it is not working. I have tried rebooting the router and it is still allowing access. I have provided the settings and ranges for PCs.
View 3 Replies View RelatedLinksys Wireless Router :: WRT610n No Power / Won't Turn On
Dec 27, 2011My WRT610n went out today for no apparent reason.All of my other peripherals are still running, but the router won't turn on. I've tried different transformers, outlets and powerstrips, with no luck -- no power. I've also tried a hard reset on it, with no luck.
View 3 Replies View RelatedLinksys Wireless Router :: How To Block Facebook On WRT610N
Feb 22, 2011How is it possible to block facebook (or other sites) on WRT610N router, given that I have already set up Internet Access restrictions based on day/hour ?
View 9 Replies View RelatedLinksys Wireless Router :: Macbook Pro And 5.8 Ghz Channel On WRT610N?
Feb 17, 2010Any success with a recent vintage Macbook Pro connecting to the 5.8Ghz channel on a WRT610N. I can connect with the 2.4 channel without a problem but I cannot maintain a connection on the high channel. Linksys support told me that the hardware was not compatible with the high channel.
View 3 Replies View RelatedLinksys Wireless Router :: WRT610N - Connect To Smart Tv?
Oct 10, 2011To connect my new "smart tv" with my wireless linsys WRT610N, smart tv ask to take off all protection such as firewall and antivirus. Doing so, I cannot connect my laptop with my router. Is there a solution to connect both at the same time?
View 1 Replies View RelatedLinksys Wireless Router :: WRT610N Incompatible With Bonjour
Sep 10, 2009I read an earlier posting about an issue between SPI on the latest WRT610N Version 1.0 firmware and a user's Apple TV. This pointed me to a "solution" to a perplexing problem I was having.
I have 4 machines, 3 connected via WiFi and 1 on one of the wired ethernet ports. I also have 2 Apple Airport Express units for audio streaming as well as 2 iPhones connected wirelessly.
Now for the symptoms, which are all new since updating to firmware ver.1.00.03.15:
1. The WiFi machines see the Airport Express units and can stream audio to them. However, the iPhone Remote app has trouble staying connected to iTunes running on any of these machines. A router reboot is a temporary fix, but connection is eventually lost again.
2. The wired machine cannot see the Airport Express units, nor can the Remote app pair with iTunes on that machine. It's as though no Bonjour-related functions work. Here, a router reboot also provides a temporary fix, but one that lasts only minutes.
Based on that prior post, I disabled SPI on the router and, lo and behold, the wired machine suddenly sees all Airport Express units and can pair with the iPhone Remote app!
I was going crazy, verifying that I was not having Windows Firewall issues, that there wasn't an incompatibility with Windows 7 (which I'm running on all), that this wasn't a Homegroup incompatibility of some sort, that Bonjour was up to date, etc. Only turning off SPI fixed the problem entirely.
So, Linksys ...Any firmware bug fix in the works for this? Can I safely go back to the prior firmware update without security or function concerns? If so, where can I get my hands on the older firmware file?
WRT610N Version 1.0 running 1.00.03.15
Linksys Wireless Router :: WRT610N V2 Speed Limitation?
Oct 3, 2011i used my 610N v2 for 2 years and recently i upgraded my network from 100mb to fiber 500mb , however, if i directly plug the lan cable to my computer , i can get full speed , but with 610N, the speed is limited to 130 for both upload and download .i had already upgrade my firmware and did factory reset, none of them work. Is it the limitation of the router ?
View 1 Replies View RelatedLinksys Wireless Router :: QOS On WRT610N Causing Slow Down?
Jun 30, 2011For some reason, I have been trying to use QOS for several network related jobs (VPN, streaming). It would seem that when QOS is enabled and the appropriate ports are set which a high priority, the speed of my connection drops to a crawl. When I disable QOS, I'm flying again. I have confirmed ports, and protocol types (TCP or UDP) and nothing seems to work.
View 2 Replies View RelatedLinksys Wireless Router :: Expired Certificate On WRT610N
Jan 16, 2009I just purchased a WTR610N and when I connect to the admin interface over SSL it gives me a cert that expired on 12/31/1970. I updated the firmware and that didn't change anything. How to get it to use a valid cert?
View 9 Replies View Related