4G Cradlepoint Router Keeps Resetting?
Feb 2, 2011
I'm trying to get an MBR1000 Cradlepoint 4G router working, but every time I plug the 4G aircard in, the router constantly resets itself about every 10 seconds or so. If I take the aircard out, the router is fine (of course doesn't have internet connection), and I can plug the card into a PC and it works fine. I talked to Verizon, and they told me that the air card that we DID have wouldn't work with a router, so they exchanged it and gave us a newer one. The 4G card is the Pantech UML290. I've tried everything I can think of, including updating the firmware on the router (and the router's 4G firmware), I've reset the router to default settings in case a setting got messed up.The guy at Verizon told me that I should basically be able to plug it in and have it work.
View 1 Replies
ADVERTISEMENT
Jul 15, 2011
I have a Cradlepoint MBR1000 router and am wondering if it will support GB speed ? If so, which are the best GB network cards for highest performance.
View 3 Replies
View Related
Jun 9, 2012
I have a CradlePoint MBR900 router where I use an air-card to get internet.Since the E2500 broadcasts better, I would like to use it as my main wireless device.I have a cable connecting a standard ethernet port from the MBR900 to one of the standard ports on the E2500.Then, I have my computer plugged into another of the ports from the E2500.This enables me to access the internet.However, when I run the setup.exe from the Linksys CD, the application cannot detect the E2500.I also tried to use http to connect via 192.168.1.1 and I cannot connect to it that way
View 9 Replies
View Related
Sep 22, 2011
I am trying to replace my Cradlepoint MBR1200 with a CBR450 in bridge mode, to let the E4200 take over all the WAP and DHCP handling, but having a hard time.I set the CBR450 in bridge mode and when I connect it to my laptop it properly passes the IP info to my Mac and allows me to connect. I then connect it to the E4200 WAN port with it set to get IP address automatically but nothing ever happens and I am never allowed traffic in/out over the WAN.
I *can* get internet access by leaving the CBR450 in normal mode (handling DHCP, etc) and then plugging it into the E4200 LAN port and having the E4200 set to bridge.why the E4200 WAN port is not getting the bridge info and allowing connection? FWIW, works fine connecting to a DSL modem with the DSL model set to bridge mode at my other house.
CBR450 and E4200 both on latest firmwares.
View 2 Replies
View Related
May 17, 2012
I have a Cradlepoint MBR1000, it has updated the firmware automatically to 2.0.0. Now I cannot see anything that is connected to it. In other words it will not show any connected equipment in the wireless status, and it will not show DHCP status. I have done a hard reboot and still don't see anything. Everything works, everyone is able to connect, but I can't see them..
View 1 Replies
View Related
Mar 15, 2012
My internet is set up like this: 3G USB modem>Desktop>Router>Everyone else.This works well except that the connection randomly drops for everyone connecting through the router. Every minute or so when you load a page a message from the router will pop up saying no attached WAN device, this goes away after about two seconds but it effectively interrupts file downloads and signs you out of things. I can plug the modem directly into the router and it doesn't drop, but for some reason it increases my ping by about 15 and I have to reset the modem twice an hour or it becomes very slow. My router is a cradlepoint MBR1000 and my modem is a sierra wireless 598U. I have also tried connecting the modem to other computers but everyone connected to the router still gets random connection drops.
View 3 Replies
View Related
May 11, 2012
is there a way to disable reseting SMC router
View 1 Replies
View Related
Jul 3, 2011
Well the model of my linksys is in the title so If you need It have a look at the title, so what I wanted to know was, what exactly does resetting my router do (be as detailed as possible) Is It hard to reset a router? and do you think that in my case resetting is necessary.
I forgot my wpa key, also my default password Is not "admin" I'm pretty sure I changed it after I got my router.
View 1 Replies
View Related
Mar 21, 2011
I added a VOIP fax line to my network and in doing so, was forced to reset my router, as it would not go on-line. Now the printers are all off line and I can not get them back online. I followed instructions within admin and it did not work. My network is a 2 computer network. My computer acts as server and then one other computer.
View 2 Replies
View Related
Dec 1, 2012
I have a Netgear WNR1000v3 router that I just reset to factory defaults, and now when I run ipconfig /all it doesn't show up as having a gateway. Note that I am connecting with a laptop wired in to a LAN port on the router. (also tried on WAN port) Here is what shows up:
SpoilerEthernet adapter Local Area Connection:
View 1 Replies
View Related
Aug 6, 2011
I have Charter Communications Internet Service the 18MB Service. All Day today the Modem kept Resetting itself as if I had the modem plugged into a lightswitch, Called Charter and they gave me the run around. Im leasing this Cable Modem / Router all in one from them, its a Ubee DDW3611 Docsis 3. Here are the Event Logs as well as my Signals Right here,
[code]....
View 1 Replies
View Related
Feb 26, 2013
we hadn't have the WEP key on our Linksys wireless router, so we decided, about a month ago, that it was a good idea to lock our wireless connection. So we did. For a couple of weeks, everything worked just fine.But then we bought a new printer, which happened to be a wireless network printer, and in the process of installing it, we mistook the reset button (I think) on the router for some other button and ended up resetting the router. When we did that, we undid WEP key, thereby unlocking the router. Then, we locked the router again, at which point one of our computers--which happens to be mine--ended up not working. All other computers and phones and iPads work just fine, but this one laptop of mine just doesn't work (with respect to wireless internet connections, of course).
- pressing the reset button on the router again. It kind of works. The internet works for about five or ten minutes (which is unbearably annoying because I have to reconnect it every five minutes), but my computer somehow disconnects itself from the internet connection. Also, although the internet technically "works," the wireless network icon thing on the bottom right of the screen has an "X" on it, which I thought meant the internet is not working, but it apparently doesn't, because my internet is working now. And, if I click the icon, it says that I'm not connected, but, again, the internet works. (for about 5~10 minutes, if I unlock the router)
- changing the internet protocol information (I don't think it does anything, but.)
- changing the wireless internet connection property to WPA, WPA-PSK... everything.
*All computers in the house have wireless internet connections but mine.
*When I reset the router, the internet works, although the computer says it isn't connected, and it disconnects itself every 5 or 10 minutes.
View 2 Replies
View Related
Nov 9, 2011
I usually get a solid speed of 2.3MBss yet today I am getting only 500kb/s I have reset my router 3 times, and my computer twice. Why is it happening?
View 1 Replies
View Related
Oct 8, 2011
Got a Belkin wireless modem router some 18 monthes ago, and after a bit of a struggle managed to set it up. It worked fine, aside from the odd depower repower. For some reason, it just stopped working yesterday. I initially checked all my cabling etc and everything seems fine. I next tried resetting my modem/router to factory settings. When I tried to install the Belkin software I fell at the first hurdle with a message saying "The setup assistant is not able to connect to the router". After googling my issue, I followed others advice and running the cmd setting and typing in "ipconfig" only to find that my media state was disconnected.
View 2 Replies
View Related
Nov 18, 2011
So, i have a e2500 router and find that every so often, I have to unplug it and reset it because I am losing my internet connection.
View 7 Replies
View Related
May 24, 2011
I purchased a new WAG160N router a few months ago and recently I have been having major problems with connectivity.The problem is that it resets itself at seemingly random times. I see it happening. The red power light starts flashing red and then the other lights slowly turn green as it re-establishes connection to the internet.
This is becoming extremley frustrating as I do online gaming with my XBOX 360.I use wired connections using ethernet cables. One to my laptop. And one to my XBOX 360.I have contacted my ISP who have done line checks and I have had an engineer look at my line and all is good. I have also replaced all cables to/from the router including phone cords and ethernet cords. EVERYTHING is new.I recall one incident in which my internet was down and I just couldnt get connection AT ALL. I rang my ISP and they got me to log into my modem settings. The settings were all altered for some reason and I have no idea why. When they told me to enter the details in the settings the internet worked immediatley.
View 3 Replies
View Related
Jan 18, 2010
My roommate and I recently got a WRT120N to replace an older Linksys router that was exhibiting the same problems with less frequency. Indeed, the entire reason we got the new router was to fix these problems. Alas, they have become worse.Anyways, what's happening is that the router constantly resets itself. It does this every 20 minutes to an hour and doesn't seem to be related to how much traffic it's dealing with.It's not just the internet going down, it's the entire network, and not even just the wireless part. My computer has a wired connection to the router and, and I get told "A network cable has been unplugged" every time it happens. Then, if I look down at the router, I see no flashing lights, just the steady glow of the power light. It always fixes itself after 10-15 seconds, but it's very annoying. Certainly, playing games online or having a conversation on Skype is made more difficult.As previously mentioned, we replaced our older router because it was exhibiting the same behavior, but the new one does it with greater frequency. At the very least, the router does reset itself instead of needing us to cycle the power. The setup was slightly different with the old router: I was using a wireless connection with a WMP54Gv4 which I've had to disable since it bluescreens the moment it so much as sniffs a signal from the WRT120N?
View 9 Replies
View Related
Jul 30, 2012
I have tried to reset the password for 7604 but it is not working. At the rommon mode, i input 0x2142, and then reset.
It reloads and keeps asking for password.
View 7 Replies
View Related
Sep 9, 2011
My D-link router won't give me a break. Every 10 or 20 minutes it resets, severing the internet connection. This is extremely annoying, especially when I'm playing online games or downloading something. Simply put, the three lights suddenly turn off, then they start turning on again one after the other. I don't want any of the automated answering machines with their usual 'help', like "download update", "contact your ISP","disable your firewall".
View 2 Replies
View Related
Jul 21, 2011
I have bought a DIR 615 router one week ago and although my main goal was to use it at better wireless speeds (using the N feature) it turned out that I can only use it as a normal router. The hardware version is H1 and the software ver is 8.0.
The problem is that whenever I turn on the wireless with default configuration, the router immediately starts resetting by itself over and over again. Sometimes it doesn't reconnect, but as soon as I try to connect to it using one of my laptops, it immediately starts restarting. After it starts the continuous resetting, it is very hard to reset its settings using the hardware reset button, because I don't even have time to press it for 10 seconds. If the wireless is turned off, everything works.
View 3 Replies
View Related
Apr 21, 2013
This router is resetting to default(erase router name and passwords and resetting router login to default. only thing i see is my sons has a iphone that will use the wifi and i have set parental restriction on it during certian hours. This past 3 time it has reset in 2 weeks his phone with the parental restricions are common. one other thing is i use the app on my droid to check settings on the router .
so th ecommon points here are one one using wifi threw router and has restrictions on it and outer is me with the linksys app to log into my rrouter and make a change like yuring on parental controls on..
but what happens is the router will reboot and renames itself to cisc05179 and cleared all protection and sets router to unsecured.
View 3 Replies
View Related
Dec 24, 2011
Turns out one of the relatives changed the router name and password, and in a fit of brilliance, forgot to WRITE THE NEW USERNAME/PASSWORD DOWN!So I typed in 192.168.1.1 and tried literally every combination I know. NOTHING works tried rebooting the WRT120N. I tried both holding the reset button in, as well as holding the reset button in along with pulling the power adapter cord. Neither of these achieved the desired result (which would be the resetting of the factory username and password to "admin/admin".
View 2 Replies
View Related
Jul 22, 2011
specs: linksys router wrt160n v3, verizon modem gt701c, windows xp service pack 3, verizon DSL, southern california.I have been able to connect to the internet directly through the modem only...but i need my wireless back working. I've reset my router a few times recently trying things i've read on forums from people with similar problems. The most recent thing i did was RESET the router -> connected modem/router/computer properly -> turned them all back on in the proper order -> check to see if websites would open. They didn't so i tried doing this, which was suggested...i plugged the router into the computer and enabled MAC address and then pressed the Clone MAC address button and saved....then I tturned everything off again and rebooted everything again in the proper order and still couldn't load any web pages. Here are my IPCONFIG/ALL read outs for both when i'm hooked up with the router & modem (which isnt working) and directly to the modem (which is working) this is the one with the router & modem:
C:Documents and SettingsOwner>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : shakas
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
[code]....
My modem and wireless were working fine for years...and then recently without me doing anything my modem kept dropping connection and the internet and dsl lights kept flashing and then going back solid....so i'd be connected for a few minutes and then they'd start flashing again over and over all the time. I finally called verizon and then had me fiddle around with stuff...followed all their directions...but ended up only being able to connect while directly connected to the modem. Even then, the modem was still losing connection and getting it back. (i was supposed to schedule a house call for a tech to check it out, never did) Over a couple weeks the connection ended up getting better on its own, so now it pretty much never drops out anymore. (almost) i've reset my modem, i've reset my router....i just still cant seem to get websites working with my modem and wireless router connected.
View 3 Replies
View Related
Aug 11, 2008
I have a WRT54G router Ver. 5 with firmware v. 1.02.5. This is the second time this has happened to me but the router reset itself to the factory defaults. I lost all my configurations. I'm saving the configuration this time but it will be annoying to keep having to reconfigure the router.
View 9 Replies
View Related
Nov 29, 2012
Putting this router back in service, I reset (10 and 30 sec hold) until lights flashed. Unplugged it. Came back and connected to computer. Used default u/n = blank and p/w = admin -- doesn't work, can't get to control screen. Tried various combinations and still won't work. How do I get router to respond?
View 9 Replies
View Related
Jan 9, 2013
How do I either retrieve or reset the router password? To edit it you have to have the current password, which it doesn't display. If I want to reset it do I have to do a factory reset on the router? If I do that, then I have to set everything up again.
View 3 Replies
View Related
Jun 23, 2008
I reset my WRT54G wireless router, so I could use the default password for 192.168.1.1 and the default password and username still do not work.
View 6 Replies
View Related
Oct 27, 2011
What is the procedure to reset a 1941 router to factory defaults? I just recieved my1 1941 router. I connected it up to my Mac using USB. I got loged in using the cisco/cisco login and it said it will only work once and that I should create a new account. So I entered the command as directed on the screen and it gave my an error about the command. I verified it three times and each time it rejected. While I was looking online for an answer the connection timed out and now I can't get back in.
View 1 Replies
View Related
Jan 9, 2010
WRT160Nv3 Firmware Version: v3.0.02
I've been using Linksys for years but the last two routers I have purchased have been very problematic.
- My router hasn't had this problem before. The other day I was downloading 4 games at a time from STEAM, when I got home from work I found that my router had completely gone back to factory settings. So I configured my DSL PPPoE, SSID, Wireless Security (WPA) changed the default admin PW and about 20 minutes later it was back to factory again.
I've done a "hard" reset and reconfigured and still it resets itself. What's also upsetting is this completely opens my network up to ANYONE when this happens...
So far in the past 2 days I have (now using a backup restore file) re-configured the device 10 times.
The only thing I can think of is that I just got Windows 7 the same day this started happening. I thought it could be STEAM as well so right now I have STEAM closed to see if it resets while it isn't running.
Could TOO much demand on the router cause it to completely reset itself to factory config?? Seems to me like there's a huge firmware or hardware problem here.
I have other friends and even co-workers that also have problems galore with their Linksys products...No other router it seems has as MANY issues as Linksys. Hat to say it but my next purchase most likely will not be another one of their products. This just shouldn't be happening.
View 5 Replies
View Related
May 13, 2013
I was given this router (it's my 3rd one) and cannot get the reset button to reset the password. I have run throught a 30/30/30 reset as well as just holding the button in for the standard 30 seconds.
I know the router works, as in i can ping it. It asks for a password when i go to 192.168.1.1, but *blank* and "admin" do not work. When i click the cancel button it displays a pink(salmon) screen that says "401 Unauthorized Authrization required". (all of this is when i am connected to it with an ethernet cable to #1)
When it's sitting there it has an led lit over power and one ove wlan which flickers from time to time.
View 1 Replies
View Related
Jan 5, 2013
I can't remember my password and I am locked out. How can I reset?
View 1 Replies
View Related
Jan 13, 2013
I recently bought an EA4500 specifically to utilize the QoS feature. I have my xbox in the set up for the prioritization, but when I try to set the bandwidth to 250 kbps upload, it resets to 0. My xbox is hardwired to the router and I know most of the feature set of this particular router is geared towards wifi, but I would assume the QoS settings would apply to the wired devices as well. exchanging this router for one that supports DD-WRT?
View 8 Replies
View Related
Apr 3, 2012
Last year our Network Security Supervisor submit his resignation and unfortunately did not endorse us the admin password we already tried the password he suggested when we contacted him but nothing of them works. Is there anyway we can reset the password without resetting to factory default?
View 1 Replies
View Related
