D-Link DIR-615 :: Wireless Router Continuously Resetting Itself When Turned On

Jul 21, 2011

I have bought a DIR 615 router one week ago and although my main goal was to use it at better wireless speeds (using the N feature) it turned out that I can only use it as a normal router. The hardware version is H1 and the software ver is 8.0.

The problem is that whenever I turn on the wireless with default configuration, the router immediately starts resetting by itself over and over again. Sometimes it doesn't reconnect, but as soon as I try to connect to it using one of my laptops, it immediately starts restarting. After it starts the continuous resetting, it is very hard to reset its settings using the hardware reset button, because I don't even have time to press it for 10 seconds. If the wireless is turned off, everything works.

View 3 Replies


ADVERTISEMENT

Linksys Cable / DSL :: WAG160n Won't Boot / Continuously Resetting

Jun 15, 2011

I have a WAG160n v1 annexA with lateset firmware which was working good. Until yesterday, when I founded continuously resetting. I starts and then power led switches off and all internet leds switch on and the keeps repeating the same thing. I tried resetting by pressing the button for 5 sec, the power led turned red and then started blinking red.  Left it for some time (1min) and then powered off the modem and again powered it on. Nothing change. I connected it to my laptop and then I powered off both of them and powered them on, first my modem and then my laptop.

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8961ND Light Blinking Continuously - Unable To Connect Internet

May 10, 2013

Region : India
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : S/N: 12B79605315
ISP : BSNL Data One

I had Purchased a brand new TP-Link WifI Modem Router TD-W8961ND with S/N : 12CB5200872 from [URL] and it got delivered few days back. When I am trying to connect it to the internet the modem is not getting connected nor configured. The Power button light, ADSL Light and internet light are continuously blinking and nothing is getting steady. The modem is appearing to be a damaged piece of modem and it is very unfortunate that we have got a modem from flipkart in an unserviceable condition. It came with a warranty of 03 years and I wanted a replacement so that I can use the modem for connecting internet.

View 1 Replies View Related

Cabling / Cards :: D-link Router Keeps Resetting Every Ten Minutes On Its Own

Sep 9, 2011

My D-link router won't give me a break. Every 10 or 20 minutes it resets, severing the internet connection. This is extremely annoying, especially when I'm playing online games or downloading something. Simply put, the three lights suddenly turn off, then they start turning on again one after the other. I don't want any of the automated answering machines with their usual 'help', like "download update", "contact your ISP","disable your firewall".

View 2 Replies View Related

D-Link DIR-615 :: After Reset / Wireless Automatically Turned On

Feb 24, 2011

Does a RESET automatically re-enable wireless = ON? or is wireless OFF until you go into the config and reenable it?

View 2 Replies View Related

TP-Link 300Mbps Wireless :: WR1403ND - Can't Connect When WMM Is Turned On

Jan 18, 2013

Region : Australia
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :

Yesterday I got a new TP-Link TL-WR1403ND Wireless N router. And after trying for ages to try to connect my Galaxy Nexus and iPad (both Wireless N devices), I finally called the TP-Link Support.Both devices could see the wireless, but would never let me join.Anyway, support told me to try connect a laptop if I had one, which I did (a very old one) and it also could not connect. The first thing the tech got me to do was set the mode from mixed-b/g/n to mixed-b/g. This got it to work, and the tech basically said � there you go, works. But the main reason I got this router was to use wireless n.Anyway, I told her that was not acceptable, she then told me to set it back and change the security to WPA-PSK (it was WPA2-PSK). I did this and she also told me to disable WMM.Anyway that worked, so I was happy. I then went and change the security back to WPA2, and it still worked. So the main issue stopping me from connecting to the WiFi from my devices was WMM.So after all that... I looked up WMM, and can see it basically a QoS feature. So why does it not work with my phone, ipad and laptop? I have searched the net, and from what I can see, it is a very Important thing to have WMM turned on. So why won't it work with my devices? All three of them can see the wireless network, I can put the password in, but then they don't connect.I am on the latest firmware (can't check the actual name and version as I am not at home), so is there something wrong with this particular router? Is it a known problem? Do I have a faulty unit?

View 6 Replies View Related

Tp-link Dual-band Wireless :: Wr2543nd Goes Down When Wifi On Xperia U Turned On

Feb 4, 2013

Region : Others
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version : TL-WR2543ND_V1_121207
ISP :

I bought new smartphone - Sony Xperia U, it is with android 4.Until then I have not any problems.As soon as i activate wifi on phone - all wifi on router is down, i cannot even ping it over wifi.Ping via lan interface is ok.Tried different channels, different max speeds, but nothing works.Only everything works if i have switch router to be only B/G.

View 4 Replies View Related

D-Link DWA 510 Continuously Dropping Out And Poor Connection

Jan 17, 2012

I have a D-Link DWA 510 and it's been perfectly fine, no hassles. Until about a week ago. Since then, not a lot has changed in my computer except for a new PSU/CPU and Keyboard and Mouse. Nothing has changed about the router, it's just the card that's messing up.

What I've tried:
Reinstalling the drivers
Updating
Rolling Back
Changing PCI card position

I'm up for trying many things. I just want some reliability until Saturday/Sunday when I buy my new card.

View 8 Replies View Related

TP-Link 300Mbps Wireless :: Multiple TD-W8961ND Resetting Automatically

Jan 9, 2013

Region : Spain
Model : TL-WR1043ND
Hardware Version : V1
ISP : Telefonica

I have a shop and retail TP products.I have had in the past 2 days three TD-W8961ND's returned due to internet issues.upon investigation the problem is the same in that DHCP is not enabled on each of the 4x ports.It is the same across 3 customers and occurred last week end.

View 1 Replies View Related

TP-Link Dual-Band Wireless :: WDR4300 - Resetting Original Configuration

Apr 4, 2013

Region : Australia
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : Optusnet

I've had a recent problem where I turn off my router computer etc every night and the next day the router has reset to original configuration. I lose SSID, password, region etc and have to do a quick setup or restore a back up config each time.

I've had the unit for about 1 1/2 months and all was ok until recently when I switch the wireless switch at the back of the unit so my kids couldn't access the router and internet. I switched it back on after a while and all was ok and later shut down for the night. The next day when I turned it all on again the SSID password etc had reset.

Anyhow I contacted TP-link and was told to disable the WPS for both 2.4Ghz and 5Ghz. That seemed to fix the problem for a couple of days but it has now returned.Should I try the 30/30/30 reset??

View 1 Replies View Related

WRT400N Wireless Router Continuously Disconnects?

Apr 26, 2011

My WRT400N wireless router continuously disconnects and I have to keep restarting it. I have tried to download an update for it, but once i download the zip file and try to open it, it just keeps duplicating the file.

View 1 Replies View Related

D-Link DIR-655 :: Is WPS Turned On By Default

Mar 7, 2012

Is the WPS of DIR-655 turned on by default?

View 14 Replies View Related

Linksys Wireless Router :: E1000 - Hardware Failure / Power Light On Continuously

Aug 7, 2011

I have a ~3 month old e1000 v2. In the last 24 hours it appears to have died, all 4 ethernet lights plus the power light and the one to it's left are on continuously. Before I dispose of it, does anyone know if this really is a hardware fail or is there some way to recover it? I've tried a few resets, power cycles and leaving it off for a few hours in the hopes that would bring it back to life but to no avail.

View 5 Replies View Related

D-Link DIR-601 :: Iphone Does Not Work With WPA2 Turned On?

Feb 20, 2011

I use this router for my laptop with WPA2 encryption.. It works fine But When I try to use my iphone for wifi , It says ' Unable to join the network"

When I remove the security, It work s fine on iphone. how to allow iphone to access the wifi

View 1 Replies View Related

D-Link DCM-201 Requires Frequent Resetting

Mar 21, 2011

I just got Charter cable internet and decided to purchase my own cable modem instead of paying 5 dollars a month to rent one. I got a D-Link DCM-201. I know it is a little old but it was brand new/unused so I figured it would work out well. Ever since we got it hooked up every few hours we lose internet connectivity. The power, cable, and status lights are solid green and the Ethernet light is blinking green. The only fix I have found for this is to power cycle the modem. The problem is this happens about once every 4 hours...having to reset the router every few hours is making having cable internet a much more painful experience than it should be.

View 7 Replies View Related

ADSL D-Link 2640U Not Resetting

Dec 19, 2011

I have a wireless ADSL, D-Link 2640U. I was doing some configuration on it and immediately the control panel disappeared. I am trying to log in it is refusing. I have try to reset, it is not resetting. Network is working, but no internet because I have not yet configured it for the internet. When i use it's cd, it reaches to the point of detecting it and telling me that "The router is off or a cable is not connected" Though it is on and the cable is fine i have tested it in different routers it works well!

View 1 Replies View Related

D-Link DIR-601 :: How To Get WEP Code Back Without Resetting

Apr 5, 2011

I noticed that I'm unsecured what happened We have had many power outages and do not know how to get my WEP code back in do I reset and do all over again Surly their must be an easy way I don''t know?

View 1 Replies View Related

D-Link DIR-655 :: DHCP Off / Multicasting Turned On Under Advanced Settings

Dec 15, 2012

I've got a DIR-655 that I use as a wireless access point/switch (dhcp off) behind my Actiontec Verizon Fios router. The DIR-655 is in the basement and has my PS3 and Xbox hard wired to it.I've got playon server setup on my pc upstairs which is connected wireless to the Actiontec router. If I connect my ps3 wirelessly to the Actiontec, it immediately sees the playon server and streams movies without issue. However, when I hardwire the PS3 to the DIR-655, it will not pickup the playon server connected to the Actiontec router.I've got dhcp turned off and multicasting turned on under advanced settings of the Dlink.

View 5 Replies View Related

D-Link DIR-615 :: Xbox Failed To Reconnect After Being Turned Off And Back On

Jun 21, 2011

ISP Virgin Media who ship DLINKS without any assistance for custom options, I seem to be having no end of trouble trying to get my DLINK615 and Xbox to play fair.In order to allow me to play my Xbox without any technical problems, or problems with other players I had to open up a few ports, been there resolved that. But, I only want to open them on one IP I want to always be assigned to the Xbox360. This IP being 192.168.0.100

I added that into the DHCP Reservation list, only to find that the Xbox failed to reconnect after being turned off and back on, I believe this is a problem with the DLINK Router, unless I am very badly mistaken.

View 14 Replies View Related

D-Link DCS-942L :: Cameras Time Keeps Resetting?

Mar 23, 2012

On one of my cameras time keeps resetting as if power was turned off then on again. It happens 2-3 times a day. I think there is no way to resolve it other than replace the camera.

View 6 Replies View Related

D-Link DIR-601 :: Resetting Will Not Clear Previous Firmware Settings

Jul 19, 2011

I just flashed this router with DD-WRT about a week ago inside the webui that was provided. It all went well but I wanted to go back to the original factory firmware so turned it off for 20 seconds, and held the reset button for 10 seconds to reach the emergency-room. I re-flashed it with the firmware I got from d-links website and all went well. So I tried to go to 192.168.0.1 that did not work so I tried the ip that I gave it before it was flashed and it still remained x.x.x.254. I also turned off dhcp server since my isp's modem provides that and other services. But when I looked into the logs it would keep starting up dhcp server every minute which would lead to all kinds of problems.

Edit: The ip/subnet are set to 192.168.0.1/255.255.255.0. It seems to start this as soon as dhcp is disabled.

LOG:
11:56:02 device_lan_ip=, device_lan_subnet_mask=
11:56:02 DHCP Server Start
11:55:51 device_lan_ip=, device_lan_subnet_mask=
11:55:51 DHCP Server Start
11:55:40 device_lan_ip=, device_lan_subnet_mask=
11:55:40 DHCP Server Start

Hardware Version listed in the webui: _auth_m

View 5 Replies View Related

Linksys Wireless Router :: Why Need To Keep Resetting E2500

Nov 18, 2011

So, i have a e2500 router and find that every so often, I have to unplug it and reset it because I am losing my internet connection. 

View 7 Replies View Related

Linksys Wireless Router :: WRT120N Keeps Resetting On Its Own?

Jan 18, 2010

My roommate and I recently got a WRT120N to replace an older Linksys router that was exhibiting the same problems with less frequency. Indeed, the entire reason we got the new router was to fix these problems. Alas, they have become worse.Anyways, what's happening is that the router constantly resets itself. It does this every 20 minutes to an hour and doesn't seem to be related to how much traffic it's dealing with.It's not just the internet going down, it's the entire network, and not even just the wireless part. My computer has a wired connection to the router and, and I get told "A network cable has been unplugged" every time it happens. Then, if I look down at the router, I see no flashing lights, just the steady glow of the power light. It always fixes itself after 10-15 seconds, but it's very annoying. Certainly, playing games online or having a conversation on Skype is made more difficult.As previously mentioned, we replaced our older router because it was exhibiting the same behavior, but the new one does it with greater frequency. At the very least, the router does reset itself instead of needing us to cycle the power. The setup was slightly different with the old router: I was using a wireless connection with a WMP54Gv4 which I've had to disable since it bluescreens the moment it so much as sniffs a signal from the WRT120N?

View 9 Replies View Related

Linksys Wireless Router :: E4200 Wifi Is Not Working When Tv Turned On?

Jun 5, 2012

I am having a trouble with my router, our modem is the one that is connected to a TV box and it comes with a wifi function(a modem with a wifi function). I am not sure how to set it up, so I connected it to E4200 which is located in another room using CAT6 flat cable and set it to "Bridge mode". But whenever I open the TV box, the wifi won't work, and when it's closed, it works. :s how weird is that. Are there any problems? The modem with wifi will always work either way I open/close the TV box, but the E4200 wifi will only work when I close the TV box. I asked my service provider about this and they tell me it's not their problem anymore.

View 2 Replies View Related

Linksys Wireless Router :: Computer Not Connects When E4200 Turned On

Sep 21, 2011

there has been issues with this router, and I wonder if any of you have issues connecting to the 5ghz when you wake your pc from sleep longer than an hour. For some reason when I put my computer to sleep at night and wake it up in the morning, my computer will not connect to 5ghz. It will work fine with 2.4, both are set in auto, so I dont see any issues. I did try to put 5ghz to a manual setting; wpa2, 40 mhz, and channel 161. I still get the same results. I am doing something wrong or is the router's 5ghz faulty?Also when is the new firmware coming, I am getting sick of my Harddrive being awake 24/7, its killing the harddrives life span and wasting electricity. I should put this in another post, because they should really change the media server to Wild Media Server or Serviio it would be alot better.

View 7 Replies View Related

Linksys Wireless Router :: Ea6500 Resetting To Default?

Apr 21, 2013

This router is resetting to default(erase router name and passwords and resetting router login to default. only thing i see is my sons has a iphone that will use the wifi and i have set parental restriction on it during certian hours. This past 3 time it has reset in 2 weeks his phone with the parental restricions are common. one other thing is i use the app on my droid to check settings on the router .
 
so th ecommon points here are one one using wifi threw router and has restrictions on it and outer is me with the linksys app to log into my rrouter and make a change like yuring on parental controls on..
 
but what happens is the router will reboot and renames itself to cisc05179 and cleared all protection and sets router to unsecured.

View 3 Replies View Related

Linksys Wireless Router :: Resetting Password On WRT120N?

Dec 24, 2011

Turns out one of the relatives changed the router name and password, and in a fit of brilliance, forgot to WRITE THE NEW USERNAME/PASSWORD DOWN!So I typed in 192.168.1.1 and tried literally every combination I know.   NOTHING works tried rebooting the WRT120N.   I tried both holding the reset button in, as well as holding the reset button in along with pulling the power adapter cord.   Neither of these achieved the desired result (which would be the resetting of the factory username and password to "admin/admin".

View 2 Replies View Related

Linksys Wireless Router :: E3000 - Can't Logon When Storage Device Is Turned On

Feb 17, 2012

I updated to Firmware Version: 1.0.04. And now I can't logon to the router when my storage device is turned on. However, I can logon to the router when the device is off. If I turn the power on the storage device and try to navigate the router it says ".....Can't establish a connection to the server at 192.168.1.1." Then I have to reboot the router to be able to log back on.

View 3 Replies View Related

Linksys Wireless Router :: EA3500 Upgrade Automatically Turned Back On?

Jul 5, 2012

After I restored my router to the classic firmware last week I unchecked the automatic upgrade box. This morning I found the box checked again. The router still has the firmware version I rolled back to last week. It appears Cisco has the ability to make changes to my router whenever they want.

View 2 Replies View Related

No Wireless Internet Connection After Resetting Linksys Wrt160n V3 Router?

Jul 22, 2011

specs: linksys router wrt160n v3, verizon modem gt701c, windows xp service pack 3, verizon DSL, southern california.I have been able to connect to the internet directly through the modem only...but i need my wireless back working. I've reset my router a few times recently trying things i've read on forums from people with similar problems. The most recent thing i did was RESET the router -> connected modem/router/computer properly -> turned them all back on in the proper order -> check to see if websites would open. They didn't so i tried doing this, which was suggested...i plugged the router into the computer and enabled MAC address and then pressed the Clone MAC address button and saved....then I tturned everything off again and rebooted everything again in the proper order and still couldn't load any web pages. Here are my IPCONFIG/ALL read outs for both when i'm hooked up with the router & modem (which isnt working) and directly to the modem (which is working) this is the one with the router & modem:

C:Documents and SettingsOwner>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : shakas
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown

[code]....

My modem and wireless were working fine for years...and then recently without me doing anything my modem kept dropping connection and the internet and dsl lights kept flashing and then going back solid....so i'd be connected for a few minutes and then they'd start flashing again over and over all the time. I finally called verizon and then had me fiddle around with stuff...followed all their directions...but ended up only being able to connect while directly connected to the modem. Even then, the modem was still losing connection and getting it back. (i was supposed to schedule a house call for a tech to check it out, never did) Over a couple weeks the connection ended up getting better on its own, so now it pretty much never drops out anymore. (almost) i've reset my modem, i've reset my router....i just still cant seem to get websites working with my modem and wireless router connected.

View 3 Replies View Related

Linksys Wireless Router :: WRT54G Resetting To Factory Default By Itself?

Aug 11, 2008

I have a WRT54G router Ver. 5 with firmware v. 1.02.5.  This is the second time this has happened to me but the router reset itself to the factory defaults. I lost all my configurations.   I'm saving the configuration this time but it will be annoying to keep having to reconfigure the router.

View 9 Replies View Related

Linksys Wireless Router :: Wrt120n Resetting Doesn't Work

Nov 29, 2012

Putting this router back in service, I reset (10 and 30 sec hold) until lights flashed. Unplugged it. Came back and connected to computer. Used default u/n = blank and p/w = admin -- doesn't work, can't get to control screen. Tried various combinations and still won't work. How do I get router to respond?

View 9 Replies View Related

Linksys Wireless Router :: Retrieving Or Resetting Password On EA6500

Jan 9, 2013

How do I either retrieve or reset the router password?  To edit it you have to have the current password, which it doesn't display.  If I want to reset it do I have to do a factory reset on the router?  If I do that, then I have to set everything up again.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved