ADSL D-Link 2640U Not Resetting

Dec 19, 2011

I have a wireless ADSL, D-Link 2640U. I was doing some configuration on it and immediately the control panel disappeared. I am trying to log in it is refusing. I have try to reset, it is not resetting. Network is working, but no internet because I have not yet configured it for the internet. When i use it's cd, it reaches to the point of detecting it and telling me that "The router is off or a cable is not connected" Though it is on and the cable is fine i have tested it in different routers it works well!

View 1 Replies


ADVERTISEMENT

DSL-2640U / Use Same Router For ADSL Connection With Any Converter / Connector

May 1, 2012

I have a 'DSL-2640U WIRELESS G ADSL2+ 4-PORT ROUTER'.I was using a DSL connection earlier, now I have moved to a ADSL connection.And I have been told by the service provider to get a different router with an ADSL input port.Can I use the same router for the ADSL connection using any converter or connector.

View 1 Replies View Related

D-link DSL-2640U Free Driver Download 64 Bit Windows?

Apr 19, 2011

D-link DSL-2640U free driver download 64 bit windows

View 1 Replies View Related

Cisco VPN :: ASA5505 Behind D-Link DSL-2640U Site-to-site

Apr 12, 2013

I am normally a software developer,  however with recent staff changes at my company I am now the sole IT  person.We have to sites: A and B, and we need to make a site to site.
 
I have access only to the Site A, this one contain a ADSL modem/router (D-Link DSL-2640U), and a ASA5505 behind the modem.We have an public fixed IP addresse configured on the modem.All the information that i have to configure the vpn is: Public ip of the site_BThe encryption algorithm 3DES-MD5.Shared secretThe site_B subnetwork to be reached using the vpnAnd i nedd to get this VPN UP, and it must be no nating for pakets going throught the VPN (for maintenance Issus).
 
The D-link modem is configured to get the Public IP from my ISP, and i set on it a DMZ to the ASA5505 (192.168.1.254).Until now, i folowed the site-to-site assistant using the ASDM. [code]

View 1 Replies View Related

D-Link DCM-201 Requires Frequent Resetting

Mar 21, 2011

I just got Charter cable internet and decided to purchase my own cable modem instead of paying 5 dollars a month to rent one. I got a D-Link DCM-201. I know it is a little old but it was brand new/unused so I figured it would work out well. Ever since we got it hooked up every few hours we lose internet connectivity. The power, cable, and status lights are solid green and the Ethernet light is blinking green. The only fix I have found for this is to power cycle the modem. The problem is this happens about once every 4 hours...having to reset the router every few hours is making having cable internet a much more painful experience than it should be.

View 7 Replies View Related

D-Link DIR-601 :: How To Get WEP Code Back Without Resetting

Apr 5, 2011

I noticed that I'm unsecured what happened We have had many power outages and do not know how to get my WEP code back in do I reset and do all over again Surly their must be an easy way I don''t know?

View 1 Replies View Related

D-Link DCS-942L :: Cameras Time Keeps Resetting?

Mar 23, 2012

On one of my cameras time keeps resetting as if power was turned off then on again. It happens 2-3 times a day. I think there is no way to resolve it other than replace the camera.

View 6 Replies View Related

Cabling / Cards :: D-link Router Keeps Resetting Every Ten Minutes On Its Own

Sep 9, 2011

My D-link router won't give me a break. Every 10 or 20 minutes it resets, severing the internet connection. This is extremely annoying, especially when I'm playing online games or downloading something. Simply put, the three lights suddenly turn off, then they start turning on again one after the other. I don't want any of the automated answering machines with their usual 'help', like "download update", "contact your ISP","disable your firewall".

View 2 Replies View Related

D-Link DIR-615 :: Wireless Router Continuously Resetting Itself When Turned On

Jul 21, 2011

I have bought a DIR 615 router one week ago and although my main goal was to use it at better wireless speeds (using the N feature) it turned out that I can only use it as a normal router. The hardware version is H1 and the software ver is 8.0.

The problem is that whenever I turn on the wireless with default configuration, the router immediately starts resetting by itself over and over again. Sometimes it doesn't reconnect, but as soon as I try to connect to it using one of my laptops, it immediately starts restarting. After it starts the continuous resetting, it is very hard to reset its settings using the hardware reset button, because I don't even have time to press it for 10 seconds. If the wireless is turned off, everything works.

View 3 Replies View Related

D-Link DIR-601 :: Resetting Will Not Clear Previous Firmware Settings

Jul 19, 2011

I just flashed this router with DD-WRT about a week ago inside the webui that was provided. It all went well but I wanted to go back to the original factory firmware so turned it off for 20 seconds, and held the reset button for 10 seconds to reach the emergency-room. I re-flashed it with the firmware I got from d-links website and all went well. So I tried to go to 192.168.0.1 that did not work so I tried the ip that I gave it before it was flashed and it still remained x.x.x.254. I also turned off dhcp server since my isp's modem provides that and other services. But when I looked into the logs it would keep starting up dhcp server every minute which would lead to all kinds of problems.

Edit: The ip/subnet are set to 192.168.0.1/255.255.255.0. It seems to start this as soon as dhcp is disabled.

LOG:
11:56:02 device_lan_ip=, device_lan_subnet_mask=
11:56:02 DHCP Server Start
11:55:51 device_lan_ip=, device_lan_subnet_mask=
11:55:51 DHCP Server Start
11:55:40 device_lan_ip=, device_lan_subnet_mask=
11:55:40 DHCP Server Start

Hardware Version listed in the webui: _auth_m

View 5 Replies View Related

Getting Driver Of Dsl 2640u For Windows 7 32bit?

Jul 22, 2012

i need the driver of dsl 2640u for windows 7 32bit

View 2 Replies View Related

TP-Link 300Mbps Wireless :: Multiple TD-W8961ND Resetting Automatically

Jan 9, 2013

Region : Spain
Model : TL-WR1043ND
Hardware Version : V1
ISP : Telefonica

I have a shop and retail TP products.I have had in the past 2 days three TD-W8961ND's returned due to internet issues.upon investigation the problem is the same in that DHCP is not enabled on each of the 4x ports.It is the same across 3 customers and occurred last week end.

View 1 Replies View Related

TP-Link Dual-Band Wireless :: WDR4300 - Resetting Original Configuration

Apr 4, 2013

Region : Australia
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : Optusnet

I've had a recent problem where I turn off my router computer etc every night and the next day the router has reset to original configuration. I lose SSID, password, region etc and have to do a quick setup or restore a back up config each time.

I've had the unit for about 1 1/2 months and all was ok until recently when I switch the wireless switch at the back of the unit so my kids couldn't access the router and internet. I switched it back on after a while and all was ok and later shut down for the night. The next day when I turned it all on again the SSID password etc had reset.

Anyhow I contacted TP-link and was told to disable the WPS for both 2.4Ghz and 5Ghz. That seemed to fix the problem for a couple of days but it has now returned.Should I try the 30/30/30 reset??

View 1 Replies View Related

Sharing Internet By DLink 2640u Router On Windows 7?

Jan 21, 2013

i have internet connection to my PC (windows 7) by wimax internet connection.that connect by usb to my pc. (and check the sharing option on this connection)then i need to share internet on my pc on wifi by using D-link2640u router,i connect my pc to D-link router by rj-45 cable.and setup wifi network but this wifi network did not have internet connection.

View 1 Replies View Related

D-link Dir-615 :: Config Adsl Modem Via Wifi?

Jan 26, 2012

I use D-Link DIR-615. I can't connect to config page 192.168.1.1. I need to access ADSL modem config page. Asus RT-N12 can configADSL modem via Wi-Fi.

View 1 Replies View Related

W8951ND - Use Basic ADSL And TP-Link Modem Together?

Mar 28, 2013

I have a TP-LINK TD W8951ND wireless Modem+Router which contains one RJ11 (phone line) port and four RJ45 (Ethernet) ports along with wireless N support.

Now for some reason, my TP-LINK modem doesn't work with my ISP, whereas the modem provided by my ISP works. If I wish I could get the basic modem provided by my ISP which contains one RJ11 port and one Ethernet port.

So can I link both the modems? I mean will this configuration work: Connect telephone cable to basic modem provided by ISP. And then connect the Ethernet port of basic modem to the Ethernet port of TP-link modem. And then connect remaining Ethernet ports to PC and laptop and simultaneously use WIFI.

Will it work or should I have to replace my TP-Link Modem+Router?

View 1 Replies View Related

Cisco WAN :: Connecting ADSL Line On HWIC-ADSL On Router 2901?

Aug 24, 2012

i have a problem with my adsl line connected on a HWIC-ADSL on router 2901 it was working good until yesterday   the atm interface is down but the interface dialer is up .i connected this line into home adsl modem and the line is working good?

View 2 Replies View Related

Cisco :: Slow DNS With Load Balancing Across 4 ADSL Link

Apr 19, 2012

I have a router Cisco 1901 with 4 links ADSL load balancing, when I activate the links 4, DNS resolution become very slow.

View 3 Replies View Related

TP-Link TD-W8901G - Can ADSL Modem Router Be Used As Standalone

Jun 4, 2011

I'm expanding my home network and the adsl modem router supplied by my ISP has just 1 RJ-45 port and 1 usb port (and an RJ-11 for the Internet). I have zeroed in on TP-Link TD-W8901G having 4 RJ-45 ports, 1 USB port, 1 RJ-11 port and also it is a wireless router. Currently I would be connecting the above modem router to my desktop running Linux and using the same ISP with ADSL. Considering a future scenario where I may decide to use another way to connect to the Internet like maybe 3G or Cable, etc (with their separate modems) I was wondering if my same modem router (TD-W8901G) could be used as a standalone router for connecting the devices on my home network. Basically, what I want to know is whether this modem router would be able to share an Internet connection from some other source, other than the one provided through its own RJ-11 (ADSL) source?

View 1 Replies View Related

Get D-Link DIR-615 Wireless Router To Work On An ADSL Filter

May 10, 2012

A friend of mine has given me a D-link DIR-615 Wireless Router. I only have a copper 10 meg ADSL service. The Router Internet socket is an RJ45, the ADSL Filters are RJ11. Is it possible to get this router to work on an ADSL Filter ? Can you get ADSL Filters with both an RJ45 and BT Phone connection on them, or a converter lead which converts RJ45 to RJ11 to work on the current ADSL filter?

View 5 Replies View Related

D-Link DAP-1522 :: ADSL Web Pages Not Loading Properly

Feb 17, 2012

I'm connecting to the internet via ADSL. The modem is in our living room and has a DIR-655 connected to it. Also connected are an IPTV set-top box and an Xbox 360. In our office room we have 2 computers and a Buffalo LinkStation hard drive connected by wire to a DAP-1522 which is working as a bridge for the wireless network created by the DIR-655. The reason for this configuration is that the set-top box refused to work with IPTV through the wireless bridge. Before we got IPTV, the bridge was in the living room and was primarily used for Xbox, while the modem was in the office and allowed all desktop PCs to connect by wire.

Ever since we've had the desktop PCs connected via the bridge, surfing has been difficult. Download speeds are good, but very often webpages simply refuse to load. The browser just says "Connecting to [internet address here]. For example, I might log on to Facebook, have the front page load and then I try to open a picture someone has uploaded, but nothing happens. Clicking links, nothing happens. Clicking anywhere, nothing happens. Put a new address in the address bar, nothing happens. It just tries to connect the addresses, but won't.After waiting a while, or restarting the browser, it might work again for a while.

Is it my new modem, the DIR-655 or the DAP-1522? All devices get their IPs from the ADSL modem to ensure proper networking between the devices. Streaming from the NAS to the Xbox is flawless.

View 4 Replies View Related

TP-Link 3G/3.75G Router :: Using TL-MR3220 As Repeater Behind ADSL Modem?

Jan 26, 2013

Region : UnitedKingdom
Model : TL-MR3220
Hardware Version : Not Clear
Firmware Version :
ISP :

I am connected to the internet via a non TP=Llink ADSL2 modem/router supplied by my ISP.I was using my TL-MR3220 as a 3G modem but no longer need it for that purpose. I was wondering whether I can now use my TL-MR3220 for two other purposes: as an additional wireless access point and as a means of linking equipment (i.e. printers) to the home network . i have tried connecting the ADSL2 modem/router to the TL-MR3220 via an ethernet cable (one of the 4 LAN ports on the ADSL modem/router to the blue WAN port on the TL-MR3220) but I can get no internet connection through the TL-MR3220.Is this normal i.e. something that the TL-MR3220 is not designed to do, or am I just using the wrong settings ? I have tried a whole range of different settings but none seem to work.

View 5 Replies View Related

TP-Link ADSL2+ Wireless :: Configuration ADSL For TD-W8968

Feb 7, 2013

Region : Brazil
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : Telemar Oi Velox

Very weird situation... can't get full speed with the TD-W8968 with my DSL link..

View 12 Replies View Related

TP-Link 150Mbps Wireless :: TL-WR702N - Networking Without Available Adsl Line?

Feb 14, 2013

Region : Argentina
Model : TL-WR740N
Hardware Version : V4.20.0
Firmware Version :
ISP :

Region : UnitedKingdom
Model : TL-WR702N
Hardware Version : V1
Firmware Version : ?
ISP : Manx net

Within a property without an available adsl line I'm simply trying to network a wireless laptop with a wireless printer. Both devices recognise the router, etc, but problem sending file for printing to the printer. (laptop does not detect printer). Is the lack of an internet connection the issue or simply a configuration issue?

View 9 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8970 - Optimise Driver Adsl?

Mar 4, 2013

Region : Italy
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 1.2 v000c.0 Build 130201 Rel.54921n
ISP : Telecom

Below you point out my attenuation values ​​detected on the modem in question:
Line Status:Connected
DSL Modulation Type:ADSL_2plus
Annex Type:Annex A
UpstreamDownstream
Current Rate (Kbps)4768124
Max Rate (Kbps)104811512
SNR Margin (dB)28.412.2
Line Attenuation (dB)17.233.4
Errors (Pkts) 0 0

The part adsl should be revised as the highlighted value and too discordant from the value taken on the same line as route draytek 2800 with attenuation of 24.5 db snr to 16dB, I'd like to find a job in the next firmware dedicated all'ottimizzare driver adsl modem so is worse than 6 years old

View 3 Replies View Related

Cisco WAN :: 1901 - Slow DNS With Load Balancing Across 4 ADSL Link

Apr 18, 2012

I have a router Cisco 1901 with 4 links ADSL load balancing, when I activate the links 4, DNS resolution become very slow.
 
below the router configuration:
 
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption

[Code].....

View 1 Replies View Related

Cisco WAN :: 887VA ADSL - Service Policy Brings Down Link?

Aug 7, 2012

Have installed an 887VA on the end of a ADSL connection. The provider has specified EF 150 on the link. The router is configured using a Virtual Template.
 
If the Virtual Template has a service policy applied, we don't have connectivity to their main site - although the CD and PPP lights are lit. As soon as the service policy is removed, we have connectivity.
 
We've had three sites with the same problem. Two of the sites don't have QoS specified on the link but had the same problem if the service policy was applied.
 
Hardware - CISCO887VA-SEC-K9
Software - 15.1(4)M4
 
=== config snippets
 
class-map match-all Voicematch access-group 10
  policy-map Dscpclass Voice  priority 150class class-default
 interface ATM0
bandwidth 1143
bandwidth receive 12334

[code]....

View 3 Replies View Related

Extend Network Using Wireless Link Between Two Belkin G / MIMO ADSL Router?

Oct 25, 2012

I've recently upgraded my internet provider to BT and received a BT Home Hub 3 as the new wireless router.Previous to this I was using a wireless Belkin G + MIMO ADSL router (model number F5D9630-4).There are places in the house where the wireless signal is very poor. Connecting to the internet using either of these routers is difficult in these spots. However, since the Belkin is now spare, I've been thinking about trying to use it as a low cost repeater (i.e. free) to extend the wireless range in the house.There are several good articles that I've found on this site which address the connection of two routers together (e.g. John Will's article on connecting two SOHO routers is a good example), but they rely on an ethernet connection between the two routers. Any way to establish a wireless link between the two routers to extend the range of the current wireless network.

View 9 Replies View Related

TP-Link 300Mbps Wireless :: Connect TL-WR841N To ZTE ZXDSL 831 Adsl Modem?

Apr 27, 2013

Region : India
Model : TL-WR841N
Hardware Version : V8
Firmware Version :
ISP : Reliance

I got a new broad band connection , its with an ADSL modem (ZTE ZXDSL 831). Now i want to plug in my TL-WR841N to use my WiFi and to connect to my second machine!! no matter what setup i try, i'm unable to connect

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8151N - ADSL Light Off For Temporary Period

Jan 25, 2013

Region : India
Model : TD-W8151N
Hardware Version : Not Clear
Firmware Version :
ISP : MTNL

my ADSL light doesn't get on during my afternoon hours...after so many try too it get switch on after somewhat 5-6pm...

View 1 Replies View Related

Cisco WAN :: 2911 - Support Interface ADSL Module Like Backup Link?

Apr 27, 2011

i will going to buy a router 2911 but i want know if support a interface ADSL modulo like backup in case that my primary link WAN Ethernet down and up the adsl link with a module HWIC ADSL pots.

View 1 Replies View Related

Some Sites Won't Load When Adsl Modem Tp-link Td 8840 Is Connected To Router Dlink Dir 61

Apr 30, 2011

i have a adsl modem tp link td 8840, and i had this up and running well for about 3 days. then we decided to get a router cause my little sis got a ipad2.the router is dlink dir 61.so basically i followed all the instructions and the internet was working fine.then for some reason ign site stopped working, i thought that it was down for some reason and didn't think much of it and today when i tryed to go into hotmail or facebook it doesn't work either. so i can get into the log in pages of both, but when i put in the id and password, the screen goes blank and just says waiting for .... on the bottom (using google chrome).and it never loads.i tryed with other internet browsers and it din't work so i took out the router and re wired the adsl modem only and voila. all the sites started working again.i want to use my router but i don't know why i can't acess some sites when i have it connected.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: Lan Setting In ADSL Modem Router TD-W8968 Failed

Jan 2, 2013

Region : Malaysia
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP : Streamyx

In the process of Lan setting my new wireless adsl modem router TD-W8968, an error message shown when I press save. Error Code: 1, Internal error.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved