D-Link DIR-601 :: Resetting Will Not Clear Previous Firmware Settings

Jul 19, 2011

I just flashed this router with DD-WRT about a week ago inside the webui that was provided. It all went well but I wanted to go back to the original factory firmware so turned it off for 20 seconds, and held the reset button for 10 seconds to reach the emergency-room. I re-flashed it with the firmware I got from d-links website and all went well. So I tried to go to 192.168.0.1 that did not work so I tried the ip that I gave it before it was flashed and it still remained x.x.x.254. I also turned off dhcp server since my isp's modem provides that and other services. But when I looked into the logs it would keep starting up dhcp server every minute which would lead to all kinds of problems.

Edit: The ip/subnet are set to 192.168.0.1/255.255.255.0. It seems to start this as soon as dhcp is disabled.

LOG:
11:56:02 device_lan_ip=, device_lan_subnet_mask=
11:56:02 DHCP Server Start
11:55:51 device_lan_ip=, device_lan_subnet_mask=
11:55:51 DHCP Server Start
11:55:40 device_lan_ip=, device_lan_subnet_mask=
11:55:40 DHCP Server Start

Hardware Version listed in the webui: _auth_m

View 5 Replies


ADVERTISEMENT

Broadband :: Changing Previous Owners Details And Settings?

Jun 17, 2011

bought a second hand laptop but all previous owners details are still in. they must have been on a dial-up network want to change to broadband,how? also need to sort out wifi.

View 1 Replies View Related

Cisco Wireless :: Aironet 1310 - Password Reset With Previous Settings

Feb 11, 2009

I got 4 aironet 1310 Πbut i don't have password into Enable mode!. I follow this document "Password Recovery Procedure for the Cisco Aironet Equipment.pdf" to recovery password. It succeed reset password to default Πbut it also reset Previous setting to default.
 
Can I reset aironet 1310 password and keep Previous setting?

View 3 Replies View Related

D-Link DIR-655 :: Latest Firmware 1.35 - Configuration Settings?

Aug 11, 2012

I've been lagging really bad when my sister uses the laptop upstairs with wireless connection. Just 1 computer makes me have up to 100 ping, imagine 3. How can configure my settings so that i will stop lagging or configure so that i have priority.I have a Dlink 655 Version A4 with the latest firmware 1.35

View 9 Replies View Related

D-Link DIR-601 :: Upgrading Firmware From 1.0 To 1.02 Will It Default Factory Settings?

Aug 6, 2011

I currently have this router in use with verizon dsl (PPPoe) setup.I have this set to "always on". Since the verizon modem, which is also router has been set into bridge mode and the d-link came into play its been extremely slow, and dropping connection. The router is in a separate IP class, and has no conflict with the modem. My question is, if I upgrade this firmware from 1.0 to 1.02 will it default to factory settings? I know it says only some will. I do have the backup config file, but i would be doing this remotely, and would not be able to get to this router if it goes down. Has anyone gone from 1.0 to 1.2 and saw a difference and speed, and are you able to do this without losing settings.

View 3 Replies View Related

Linksys Wireless Router :: Find Previous Versions Of WRT120N Firmware?

Feb 18, 2012

I have a problem with current (1.0.06) firmware on WRT120N. Few hours after restart DHCP server stops assigning IP addresses. Another restart resolves problem, but only for next few hours.Computers and other devices "see" my wireless network and they are able to connect to it, but the process stops at requesting IP number.There was no such effect with original firmware (although there was another problem with 2200BG), so I want to downgrade.where can I find previous versions of WRT120N firmware?

View 2 Replies View Related

Linksys Wireless Router :: E4200 - Restore Previous Version Of Firmware?

Dec 27, 2012

I have an E4200 router with 3 WET610N access points.  I did the firmware update on the E4200 router about 2 weeks ago so my son could use his xbox when he got home after 4 months of being away.  Everything seemed to work OK as far as I could tell....but when he went to sign into xbox live and watch Netflix, it will load to 98% and stop.  A friend of his came over with the new Slim xbox 360 with built in wireless and it will connect fine on its own, if we hook up one of the 610N's to it, it will load to 98% on Netflix and stop again with error code R8152.  Both of my older xbox's will hook up and play on xbox live, just not work with Netflix.

I also noticed, it shows the WET610N as a hard wire on xbox and will not search for any wireless networks, I have 2.  The newer Slim xbox360 will search out both networks on its own if you allow it to use its internal wireless.  This only happened since the firmware update.  And this equipment was working fine before this.  Is there a way I can restore the previous version of firmware? 

View 4 Replies View Related

D-Link DAP-1522 :: Wireless Settings Are Empty With Latest Firmware

Sep 10, 2011

With firmware version 1.31, the Wireless settings page is blank when a browser other than Internet Explorer is used to access it - for instance, Firefox or Chrome.All other pages appear and seem to work properly, only the Wireless settings page is empty. Luckily, the Wizard still works and can be used to set the Wireless settings for general purpose use. Older versions of the firmware worked fine with other browsers, including the Wireless settings page.

View 6 Replies View Related

Resetting Modem / Router To Factory Settings

Oct 8, 2011

Got a Belkin wireless modem router some 18 monthes ago, and after a bit of a struggle managed to set it up. It worked fine, aside from the odd depower repower. For some reason, it just stopped working yesterday. I initially checked all my cabling etc and everything seems fine. I next tried resetting my modem/router to factory settings. When I tried to install the Belkin software I fell at the first hurdle with a message saying "The setup assistant is not able to connect to the router". After googling my issue, I followed others advice and running the cmd setting and typing in "ipconfig" only to find that my media state was disconnected.

View 2 Replies View Related

Cisco Routers :: WRVS4400N Resetting Itself To Default Settings?

Feb 20, 2012

I have 2 WRVS4400N routers that were installed at 2 remote locations to provide VPN access to these sites. The routers have been found reset to the factory defaults on three occasions, twice on one of them and once on the other. Both sites are unmanned so no-one is on site to have pressed the reset button, and both routers were set to have remote management disabled. They are running v2013 firmware.

View 3 Replies View Related

Cisco Infrastructure :: Resetting 2431 IAD To Factory Settings?

Dec 10, 2012

I am at the rommon screen getting the > sign
 
Rommon 1>
 
When I am typing confreg 0x2142 I am just getting “rommon 2>” and if try again I will get “rommon 3 >”
 
No reset prompt , this never happened to me

View 1 Replies View Related

D-Link DIR-600 :: How To Clear Cache Of Router Every Now And Again

Dec 1, 2012

Every 2 minutes, I want to clear it, because some machines will be turned off. Currently, they will stay on on the left hand side of my host's window explorer.

View 1 Replies View Related

D-Link DCM-201 Requires Frequent Resetting

Mar 21, 2011

I just got Charter cable internet and decided to purchase my own cable modem instead of paying 5 dollars a month to rent one. I got a D-Link DCM-201. I know it is a little old but it was brand new/unused so I figured it would work out well. Ever since we got it hooked up every few hours we lose internet connectivity. The power, cable, and status lights are solid green and the Ethernet light is blinking green. The only fix I have found for this is to power cycle the modem. The problem is this happens about once every 4 hours...having to reset the router every few hours is making having cable internet a much more painful experience than it should be.

View 7 Replies View Related

ADSL D-Link 2640U Not Resetting

Dec 19, 2011

I have a wireless ADSL, D-Link 2640U. I was doing some configuration on it and immediately the control panel disappeared. I am trying to log in it is refusing. I have try to reset, it is not resetting. Network is working, but no internet because I have not yet configured it for the internet. When i use it's cd, it reaches to the point of detecting it and telling me that "The router is off or a cable is not connected" Though it is on and the cable is fine i have tested it in different routers it works well!

View 1 Replies View Related

D-Link DIR-601 :: How To Get WEP Code Back Without Resetting

Apr 5, 2011

I noticed that I'm unsecured what happened We have had many power outages and do not know how to get my WEP code back in do I reset and do all over again Surly their must be an easy way I don''t know?

View 1 Replies View Related

D-Link DCS-942L :: Cameras Time Keeps Resetting?

Mar 23, 2012

On one of my cameras time keeps resetting as if power was turned off then on again. It happens 2-3 times a day. I think there is no way to resolve it other than replace the camera.

View 6 Replies View Related

Use 192.168.254.254 IP And Configuration Settings Limited And No Option Of Updating Firmware?

Jun 19, 2011

i have Aztech DSL605EW wireless modem. I updated its firmware on some philipines Globle Broadband network's firmware. Now the problem is to open its configration I have to use 192.168.254.254 IP and the configuration settings are very limited and there is no option of updating firmware in it. I am stuck with it.

View 3 Replies View Related

Linksys E3000 - Reconfigure Settings After Firmware Update?

Feb 4, 2013

I have a Linksys E3000 router, which originally had all sorts of security settings, and names for the wireless networks, etc. It was all set up. I upgraded the firmware, and all of those settings sent away. Is there a way to reconfigure the settings to get them back to how they were, and if so, how do I do it?

View 2 Replies View Related

Cisco Routers :: RVS4000 Firmware V2.0.0.3 Will Not Save Settings

Aug 30, 2011

I have a RVS4000 that will not save any settings. Click on, for instance, Disable WAN requests. Click save and it goes back to Enable.If I create a VPN tunnel, click save, it clears all settings like I didn't type anything.

View 11 Replies View Related

Cabling / Cards :: D-link Router Keeps Resetting Every Ten Minutes On Its Own

Sep 9, 2011

My D-link router won't give me a break. Every 10 or 20 minutes it resets, severing the internet connection. This is extremely annoying, especially when I'm playing online games or downloading something. Simply put, the three lights suddenly turn off, then they start turning on again one after the other. I don't want any of the automated answering machines with their usual 'help', like "download update", "contact your ISP","disable your firewall".

View 2 Replies View Related

D-Link DIR-615 :: Wireless Router Continuously Resetting Itself When Turned On

Jul 21, 2011

I have bought a DIR 615 router one week ago and although my main goal was to use it at better wireless speeds (using the N feature) it turned out that I can only use it as a normal router. The hardware version is H1 and the software ver is 8.0.

The problem is that whenever I turn on the wireless with default configuration, the router immediately starts resetting by itself over and over again. Sometimes it doesn't reconnect, but as soon as I try to connect to it using one of my laptops, it immediately starts restarting. After it starts the continuous resetting, it is very hard to reset its settings using the hardware reset button, because I don't even have time to press it for 10 seconds. If the wireless is turned off, everything works.

View 3 Replies View Related

TP-Link 300Mbps Wireless :: Multiple TD-W8961ND Resetting Automatically

Jan 9, 2013

Region : Spain
Model : TL-WR1043ND
Hardware Version : V1
ISP : Telefonica

I have a shop and retail TP products.I have had in the past 2 days three TD-W8961ND's returned due to internet issues.upon investigation the problem is the same in that DHCP is not enabled on each of the 4x ports.It is the same across 3 customers and occurred last week end.

View 1 Replies View Related

Linksys Wireless Router :: E4200 With Bad Firmware Cannot Use External Storage Settings

Apr 1, 2013

This firmware bad, because my sync program, can't set create date of files on external usb storage connected to router, on 1.0.04 - all good.

View 5 Replies View Related

TP-Link Dual-Band Wireless :: WDR4300 - Resetting Original Configuration

Apr 4, 2013

Region : Australia
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : Optusnet

I've had a recent problem where I turn off my router computer etc every night and the next day the router has reset to original configuration. I lose SSID, password, region etc and have to do a quick setup or restore a back up config each time.

I've had the unit for about 1 1/2 months and all was ok until recently when I switch the wireless switch at the back of the unit so my kids couldn't access the router and internet. I switched it back on after a while and all was ok and later shut down for the night. The next day when I turned it all on again the SSID password etc had reset.

Anyhow I contacted TP-link and was told to disable the WPS for both 2.4Ghz and 5Ghz. That seemed to fix the problem for a couple of days but it has now returned.Should I try the 30/30/30 reset??

View 1 Replies View Related

D-Link DIR-825 :: Use NA Firmware On EU Firmware Device?

Mar 25, 2011

Can you use the NA firmware on an EU firmware device?I assume yes, since the hardware is the same?What's the difference between the two?

View 14 Replies View Related

Restore PC To A Previous Date?

Jan 3, 2012

I am trying to restore my pc to a previous date but the calendar that displays will not go back to December - it is stuck on January.

View 1 Replies View Related

Download Speed Has Decreased To About 1/40th From Previous

Sep 24, 2011

My download speed has decreased to about 1/40th of its previous speed, while my upload speed remains the same. Speedtest shows that my connection is equally strong as it was prior to the slowdown, even though I can't even get anything close to my original speed.Fully detailed version: About a week ago, my download speed decreased from 2 megabytes/s to about 50 kb/s. Prior to the speed decrease, I did not install or update any programs, so it's probably not an interference from some wayward program. I've likewise not encountered any suspicious activity on the computer, nor have I visited suspicious sites, so it probably isn't a virus either. There are several odd things, however. While my download speed has dropped so dramatically, my upload speed is exactly the same. According to a Speedtest.net check from August, my download speed was 8.5 mb/s and my upload speed was 4.14 mb/s. Currently, it is practically the same, at 4.09 mb/s. What is really strange, however, is that according to the Speedtest from today, my download speed is 9 mb/s, even though I can still not exceed 50 kb/s.I tested IDM (download accelerator) on some of my skydrive files, since download accelerators allow for multiple streams of data simultaneously. I was able to download around 500 kb/s, which is still not even close to what I used to be able to reach from skydrive with IDM before (~2000 kb/s), but still much higher than if I only used one download stream (~50 kb/s).

Additional info: Browsing speed and video streaming is also much slower than usual.

View 7 Replies View Related

Delete Previous Username Without Password After Making New One?

Jun 2, 2011

I made a new connection with a password. And I have deleted the old connection on the "Manage wireless connections" But the old connection still appears on the Wireless connections. I don't want my neighbors to connect to the old one since it has no password, and I can't figure out how to delete it.

View 1 Replies View Related

D-Link DIR-825 :: Can't Save New Settings

Jan 1, 2012

I got a new DIR-825 router and when I try to change settings such as the date and time or try to apply web filters my changes won't save.

View 2 Replies View Related

D-Link DIR-655 :: Not Getting Network Settings

Feb 18, 2013

I have a DIR-655 that was working for the longest time, then out of the blue it just decided to stop getting a connection to the internet.  I can connect to the router, but for some reason, it will not get any network settings.  When I check the status/device info/WAN section, it just shows:

[code]....

View 9 Replies View Related

D-Link DIR-655 :: Can't Save Any Settings

Mar 18, 2011

why I can't save any router settings? I get a momentary disconnect followed by a brief redirect message and then I get kicked back to the router log on page. This just started happening.

View 3 Replies View Related

Cisco Firewall :: Connecting Flash Of Previous ASA Model 5510

Oct 29, 2012

I was handed a firewall ASA 5520 but without external flash, I want to confirm that  the ASA at least boot from rommon mode boot must have the external flash connected? I connected  to power and I connect it by the console port it did not show any boot.Additionally I can confirm it is possible that you can connect a flash of a previous ASA model, say a 5510?

View 4 Replies View Related

Cisco Wireless :: E3200 - SSID WPA / WPA2 PSK Previous Key Deletes

Jul 21, 2011

Before I purchased the E3200 yesterday, I contacted Cisco Sales support and asked specific question about SNMP support on E3200. I was told that E3200 does supports SNMP.. However, I do not find any setup / nor any documentation on how to. Does E3200 supports SNMP? I would like to monitor my router using SNMP traps.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved