D-Link DIR-825 :: Can't Save New Settings
Jan 1, 2012I got a new DIR-825 router and when I try to change settings such as the date and time or try to apply web filters my changes won't save.
View 2 Replies
ADVERTISEMENT
D-Link DIR-655 :: Can't Save Any Settings
Mar 18, 2011why I can't save any router settings? I get a momentary disconnect followed by a brief redirect message and then I get kicked back to the router log on page. This just started happening.
View 3 Replies View RelatedD-Link DIR-655 :: Can't Save Any Router Settings
Jul 20, 2011why I can't save any router settings? I get a momentary disconnect followed by a brief redirect message and then I get kicked back to the router log on page.
View 3 Replies View RelatedD-Link DCS-930L :: Unable To Save Settings
Apr 1, 2013Due to problems with the D view cam, I have reset my IP camera DCS-930L but I can't register the password, it says "There was a problem saving your settings. Press next and try again." I can't get pass saving password, tried all the previous passwords but none works.
View 2 Replies View RelatedD-Link DCS-930L :: Cannot Save Settings And Internet Is Not Connecting
Nov 18, 2011just bought DCS-930L few days ago, the manual sounds so easy (but it's hard than it looks) i stuck on the setting-up, here is my problem: unable to connect to mydlink web site and there was a problem saving my settings. seems like internet connecting problem, the software just couldn't connect to internet.i have already registered, i got my device number and it couldn't be find in my device on mydlink.
View 5 Replies View RelatedD-Link DCS-930L :: Gives Error Of Failed To Save Settings When Upgrading
Oct 19, 2011I upgraded the firmware per one suggestion, but no difference.I am going thru the setup wizard with ethernet cable attached. I want to use them wirelessly so I clicked wireless setup, and entered my network info. At that point I get an error message saying it failed to save settings. I know the ID and password are correct.I have tried exiting the setup wizard and accessing the camera thru the web interface. All wireless settings are correct. The camera works FINE on web browser, myDlink, and even my iPhone app as long as the ethernet cable is attached.Other wireless devices have no trouble connecting to my router. Is there some setting on the router that can be preventing the connection? I've done some trial-and-error changes, like different ports and enabling/disabling UpNp on both camera and router.Oh and almost forgot to mention.I did call tech support, which was a joke. Some foreign lady was reading off a script that told me to reset, unplug, reboot everything. Then she gave me a case# and said upgrade the firmware.
View 11 Replies View RelatedCisco Routers :: RV220W Cannot Save Settings With IE9?
Nov 20, 2012Nothing happens when clicking the SAVE button after making changes on the VLAN Membership screen when using IE9, but it work fine with IE8. Any problems using IE9 during configuration?
View 4 Replies View RelatedLinksys Wireless Router :: WRT54G Won't Save Settings?
Dec 20, 2011I'm just trying to port forward with this router, and after I'm done entering all my settings, I click save settings, it tells me settings are successful.
But the it goes back to the port forwarding page and all the stuff is at default again as if I didn't make any changes. What the hell is this?
I'm sure it's just a little something I don't know about that's making it not save any changes to port forwarding.
Belkin Routers :: F5D8235-4 V3 Save Settings Before Reset?
Jan 4, 2013Is there a way to avoid network interruptions when resetting the F5D8235-4 v3 router? I was hoping to find a config file or some other way to avoid having to reset the home network and devices. The administrator password has been lost, so i would like to reset that only and not restore factory settings.
View 1 Replies View RelatedCisco Routers :: RVS4000 Firmware V2.0.0.3 Will Not Save Settings
Aug 30, 2011I have a RVS4000 that will not save any settings. Click on, for instance, Disable WAN requests. Click save and it goes back to Enable.If I create a VPN tunnel, click save, it clears all settings like I didn't type anything.
View 11 Replies View RelatedCisco Infrastructure :: 3825 Can't Save Modem Speed Settings On Aux 0
May 15, 2011I try to change modem speed from 1200 to 19200 on aux 0 interface.But I can't save the settings using "write memory" In show running-config, I can see modem speed successfully changed.
Cisco3825's OS information is here. c3825-spservicesk9-mz.124-25b.bin
Cisco :: LMS 4.2.1 - Save And Reset Button Not Working On Sys Log Purge Settings
Jul 18, 2012Save and reset button is not working on Sys log Purge Settings page (Admin > Network > Purge Settings > Sys log Purge Settings) when Email: field is not empty. An Reset button is not working at all.This is the Cisco Prime LMS 4.2.1.
Is it only my LMS server or you all have this bug?
Linksys Wireless Router :: Cisco E3000 Port Forward Settings Won't Save
Nov 28, 2011i am trying to port forward my router so that i can run a minecraft server. When I put in th port number and save the changes, it brings me to a screen that says my changes have been saved yet when i go back to the page they haven't. I have tried deleting the cookies on my browser, using another browser, using another computer, and hard resetting the router for ten seconds. None of this works.
View 2 Replies View RelatedLinksys Wireless Router :: WRT160N - Cannot Save Single Port Forwarding Settings
Sep 6, 2011I did read the thread entitled ''WRT160N Can't save settings'', but I believe this might be different. My router is actually communicating with my computer (physically plugged in), since I can save all other settings EXCEPT the port-fowarding ones.I am trying to save settings for a gaming application in the Single Port Forwarding section of my router settings. After clicking both ''save settings'' and ''continue'', it simply returns to the Single Port Forwarding section, except everything is blank, as though nothing was saved.
Here are my specs:
WRT160Nv1
Firmware Version: v3.0.03
Here are the steps I have already undertaken:
1- Erase browser cache and cookies
2- Updated to latest firmware (v3.0.03), 10-second reset button, 20-second power cycle.
Linksys Wired Router :: BEFVP41 Backup / Store These Settings In Save Place
Mar 13, 2007I use a BEFVP41 VPN router. I have changed several settings. How can I backup these settings and store these settings in a save place.
View 3 Replies View RelatedLinksys Wireless Router :: E4200 - Block Popup Window That Displays Every Time In Form / Save Settings?
Mar 23, 2012I just installed my new E4200, and am setting the Access Restrictions. Is there anyway to block the popup window that displays every time I enter the form or save the settings?
I'm using IE9 and have tried adjusting the Popup Blocker, but to no avail.
D-Link DIR-655 :: Won't Save Any Changes
Apr 7, 2012Router novice here, but have been running this router for a few years without problem. I set it up and updated firmware a few years ago.
[code]....
TP-Link 3G/3.75G Router :: TL-MR3420 - How To Save PIN Code
Feb 5, 2013Region : Others
Model : TL-MR3420
Hardware Version : V2
Firmware Version : 3.13.27 Build 120905 Rel.73281n
I have successfully connected to my ISP with the 3G USB dongle.But it seems like the PIN code is not saved. I have to enter it after a reboot of the router.
D-Link DIR-655 :: Save Configuration Of Router Before Updating To A New Firmware?
Jun 29, 2011For some reasons, my internet connection keeps dropping more often recently. My laptop still says it is connected to my network but I can just not have internet connection. It was not like that before but it happened more frequently now. What I did was to power off then on the modem and the router and everything will work fine again. I want to upgrade my firmware but I just wonder if I need to save all the configuration before doing the upgrading? If so, then how can I set it back to the old configuration that was saved?
View 5 Replies View RelatedD-Link DIR-655 :: Not Getting Network Settings
Feb 18, 2013I have a DIR-655 that was working for the longest time, then out of the blue it just decided to stop getting a connection to the internet. I can connect to the router, but for some reason, it will not get any network settings. When I check the status/device info/WAN section, it just shows:
[code]....
D-Link DIR-655 :: Can't Stay Connected To Settings
Aug 21, 2011I'm trying to change some network settings, but the router is unresponsive when I try to connect to its ip address. If I reset the router it opens a 20 second window where I can log in, but then goes unresponsive. I have encountered this on my main pc connected wireless, and duplicated the results when wired in with my netbook.
View 1 Replies View RelatedD-Link DIR-615 :: Rev A No Longer Hold Settings?
Dec 8, 2012Had my DIR 615 rev A just fail one day spontaneously; managed to bring it back by reflashing from the emergency room, but now it will not hold setting through a power cycle, other than this it seems to be working well.
View 9 Replies View RelatedD-Link DIR-825 :: OpenDNS Settings Not Working?
Aug 29, 2011I'm trying to set up opendns on my DIR-825, firmware v2.05. Under the Setup/Network Settings I set the primary and secondary DNS Server IPs to the ones from [URL] and save the settings and they don't stick.I have also unchecked the "Enable DNS Relay". Well, tried it on and off and neither pad a difference.
View 3 Replies View RelatedD-Link DCS-930L :: Cannot Get Camera Settings Tab
Nov 27, 2011i installed cameras but want to set up for motion. I have 2 dcs 930l cameras and I can see them live i have only 2 settings live video and camera info i also downloaded the link from support.dlink.com i have a new windows 7 laptop and it keeps tryng to download java app problem is now computer keeps asking for a username and password and I have no idea what username and pw it wants as it says in the box it is unsecure
View 1 Replies View RelatedD-Link DIR-600 :: Settings In Advanced Wireless Are Gone
Dec 15, 2011What happened to "cable test" in 2.10 and 2.11? Thought this was I nice feature to check all connections. Also lots of settings in "advanced wireless are gone" (some are moved, many gone) Why?
View 1 Replies View RelatedD-Link DIR-601 :: IP Settings Are Dynamic Not Static
Oct 2, 2010I have the dir-601 as my main router. Its IP settings are dynamic, not static. My second router, the router I'd like to use as the access point is a Belkin Wireless G Mimo. My goal is to setup the Belkin as an access point downstairs away from the main router. I'd like to do this wirelessly. I'd like to phsycialy plug devices into the Belkin, while the Belkin receives access to the internet wirelessly from my main router, the dir-601.
Here's my issue. There's an easy option to use the Belkin as an access point. So I do this and set the Belkin router to an IP outside the DCHP range ( currently 192.168.0.100 - 192.168.0.199 ) to 192.168.0.250. My dir-601 will only recognize the Belkin access point while plugged in physically. I know this because when I did a ping test it only see's the Belkin when plugged into the dir-601 via ethernet cables. My ultimate goal is to simply set the dlink dir-601 to recognize the Belkin as an access point.
D-Link DIR-655 :: When Checked All Settings Were Cleared Out
Aug 17, 2012I noticed when I went to 192.168.0.1 to check my wireless router settings, the all settings were cleared out.I tried entering settings such as SSID and security stuff. The settings show on the screen temporarily but do not save.When I try to save the settings I get the message nothing is changed save anyway? If I press save I get a window that says the setting is saved wait seconds. When I hit continue, and check my settings nothing was saved.
View 5 Replies View RelatedTp-link Wireless Router Security Settings?
Sep 12, 2012I forgot my router security code number but still working i want to need make new secure
View 1 Replies View RelatedTP-Link 3G/3.75G Router :: TL-MR3220 Manual APN Settings
Mar 14, 2013Region : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
Region : Others
I have MR3220 version 2 and HUAWEI E398 stick.It connects to 3G/4G network, but with wrong APN.It seems to me that manualy changed APN can not be applied. [code]
D-Link DIR-655 :: How To Erase All Settings When No Longer Using This Router
Feb 23, 2011Can I just plug the router into a 110 socket and then press the reset button to clear all stored information?
View 3 Replies View RelatedD-Link DIR-655 :: Latest Firmware 1.35 - Configuration Settings?
Aug 11, 2012I've been lagging really bad when my sister uses the laptop upstairs with wireless connection. Just 1 computer makes me have up to 100 ping, imagine 3. How can configure my settings so that i will stop lagging or configure so that i have priority.I have a Dlink 655 Version A4 with the latest firmware 1.35
View 9 Replies View RelatedD-Link DIR-655 :: Channel Width - Automatic Settings 20 / 40 MHZ?
Dec 28, 2011Is there a "best" channel to use for the router -- e.g. the one that would provide maximum range? I live in a fairly large home and the connection deteriorates in some rooms (not lost altogether, but weaker). Also, what is "channel width"? It's set to 20MHZ, but there is also a setting for Automatic 20/40MHZ. What's the adv advantage of one setting over the other?
View 9 Replies View RelatedD-Link DCS-930L :: Can't Set Password - Settings Not Getting Saved
Apr 6, 2013I just got a DCS-930L camera. I was able to set the password (10 characters) and complete the setup. It then said I needed to update the firmware which I did and it successfully completed. I was able to access it through the mydlink web page but when I clicked on the advanced settings, it wouldn't log in. I tried running the setup from the CD but it said "There was a problem saving your settings. Click Next to try again." That never worked. I tried a hard reset, no luck.
View 3 Replies View Related