D-Link DIR-655 :: When Checked All Settings Were Cleared Out
Aug 17, 2012
I noticed when I went to 192.168.0.1 to check my wireless router settings, the all settings were cleared out.I tried entering settings such as SSID and security stuff. The settings show on the screen temporarily but do not save.When I try to save the settings I get the message nothing is changed save anyway? If I press save I get a window that says the setting is saved wait seconds. When I hit continue, and check my settings nothing was saved.
View 5 Replies
ADVERTISEMENT
Apr 12, 2012
Server name when checked by right clicking "My Computer" and selecting properties it was A.B.C but when i pinged from client system it showed system full name as a.x.y.z the IP address showed in ping was correct.so how can it be same computer name but different domains?i have problem with .net application connecting to Sql in server from client system.
View 1 Replies
View Related
Feb 1, 2011
I successfully installed the AirLink101 AWLL6075 Adapter, however it cannot find networks because the Wireless Monitor section is always checked as being "Disabled". When I uncheck the box, a few seconds later it comes right back to Disabled with the check mark again.
View 14 Replies
View Related
Nov 13, 2012
I recently cleared out a router. I did that by typing confreg 0x2142 in rommon mode. Once I was in enable mode
[code]...
View 3 Replies
View Related
Oct 31, 2011
Ok, it all started yesterday when I was stupid enough to open a link a friend sent me. It was of course a virus. I ran a couple of anti-virus/anti-malwere programs and I think I got everything cleared. However I am not able to connect to facebook - it says that it cannot connect securely to the server or that the link is broken, or that the "server refused the connection". I have no problems with any other site. I have Windows 7 and I usually use Google Chrome but I've also tried FireFox and IE - nothing works. I tried everything I could find on the internet - I cleared all the cookies, I changed my DNS
View 1 Replies
View Related
Apr 16, 2013
I have a remote 3G Cisco router (Cisco 819) that occastionally drops it's EzyVPN and the local guys just reboot the device so when I log on and check the logs it is empty. My syslog server shows very little, can I keep the logs locally or up the logging to the syslog server?
View 1 Replies
View Related
Jan 17, 2013
I can't remember clearing the log with a clear counters. Router is a CISCO 3925-CHASSIS (revision 1.1) with C3900-SPE100/K9..System image file is "flash: c3900-universalk9-mz.SPA.150-1.M4.bin"..I did a : clear counters, enter. got this standard message >> Clear "show interface" counters on all interfaces [confirm], enter and it CLEARED the LOG BUFFER as well !!!! never seen that before. Its a newly turned up router, repurposed from another part of our network.
View 1 Replies
View Related
Jan 1, 2012
I got a new DIR-825 router and when I try to change settings such as the date and time or try to apply web filters my changes won't save.
View 2 Replies
View Related
Feb 18, 2013
I have a DIR-655 that was working for the longest time, then out of the blue it just decided to stop getting a connection to the internet. I can connect to the router, but for some reason, it will not get any network settings. When I check the status/device info/WAN section, it just shows:
[code]....
View 9 Replies
View Related
Mar 18, 2011
why I can't save any router settings? I get a momentary disconnect followed by a brief redirect message and then I get kicked back to the router log on page. This just started happening.
View 3 Replies
View Related
Aug 21, 2011
I'm trying to change some network settings, but the router is unresponsive when I try to connect to its ip address. If I reset the router it opens a 20 second window where I can log in, but then goes unresponsive. I have encountered this on my main pc connected wireless, and duplicated the results when wired in with my netbook.
View 1 Replies
View Related
Jul 20, 2011
why I can't save any router settings? I get a momentary disconnect followed by a brief redirect message and then I get kicked back to the router log on page.
View 3 Replies
View Related
Dec 8, 2012
Had my DIR 615 rev A just fail one day spontaneously; managed to bring it back by reflashing from the emergency room, but now it will not hold setting through a power cycle, other than this it seems to be working well.
View 9 Replies
View Related
Aug 29, 2011
I'm trying to set up opendns on my DIR-825, firmware v2.05. Under the Setup/Network Settings I set the primary and secondary DNS Server IPs to the ones from [URL] and save the settings and they don't stick.I have also unchecked the "Enable DNS Relay". Well, tried it on and off and neither pad a difference.
View 3 Replies
View Related
Nov 27, 2011
i installed cameras but want to set up for motion. I have 2 dcs 930l cameras and I can see them live i have only 2 settings live video and camera info i also downloaded the link from support.dlink.com i have a new windows 7 laptop and it keeps tryng to download java app problem is now computer keeps asking for a username and password and I have no idea what username and pw it wants as it says in the box it is unsecure
View 1 Replies
View Related
Dec 15, 2011
What happened to "cable test" in 2.10 and 2.11? Thought this was I nice feature to check all connections. Also lots of settings in "advanced wireless are gone" (some are moved, many gone) Why?
View 1 Replies
View Related
Oct 2, 2010
I have the dir-601 as my main router. Its IP settings are dynamic, not static. My second router, the router I'd like to use as the access point is a Belkin Wireless G Mimo. My goal is to setup the Belkin as an access point downstairs away from the main router. I'd like to do this wirelessly. I'd like to phsycialy plug devices into the Belkin, while the Belkin receives access to the internet wirelessly from my main router, the dir-601.
Here's my issue. There's an easy option to use the Belkin as an access point. So I do this and set the Belkin router to an IP outside the DCHP range ( currently 192.168.0.100 - 192.168.0.199 ) to 192.168.0.250. My dir-601 will only recognize the Belkin access point while plugged in physically. I know this because when I did a ping test it only see's the Belkin when plugged into the dir-601 via ethernet cables. My ultimate goal is to simply set the dlink dir-601 to recognize the Belkin as an access point.
View 7 Replies
View Related
Sep 12, 2012
I forgot my router security code number but still working i want to need make new secure
View 1 Replies
View Related
Mar 14, 2013
Region : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
Region : Others
I have MR3220 version 2 and HUAWEI E398 stick.It connects to 3G/4G network, but with wrong APN.It seems to me that manualy changed APN can not be applied. [code]
View 4 Replies
View Related
Feb 23, 2011
Can I just plug the router into a 110 socket and then press the reset button to clear all stored information?
View 3 Replies
View Related
Aug 11, 2012
I've been lagging really bad when my sister uses the laptop upstairs with wireless connection. Just 1 computer makes me have up to 100 ping, imagine 3. How can configure my settings so that i will stop lagging or configure so that i have priority.I have a Dlink 655 Version A4 with the latest firmware 1.35
View 9 Replies
View Related
Apr 1, 2013
Due to problems with the D view cam, I have reset my IP camera DCS-930L but I can't register the password, it says "There was a problem saving your settings. Press next and try again." I can't get pass saving password, tried all the previous passwords but none works.
View 2 Replies
View Related
Dec 28, 2011
Is there a "best" channel to use for the router -- e.g. the one that would provide maximum range? I live in a fairly large home and the connection deteriorates in some rooms (not lost altogether, but weaker). Also, what is "channel width"? It's set to 20MHZ, but there is also a setting for Automatic 20/40MHZ. What's the adv advantage of one setting over the other?
View 9 Replies
View Related
Apr 6, 2013
I just got a DCS-930L camera. I was able to set the password (10 characters) and complete the setup. It then said I needed to update the firmware which I did and it successfully completed. I was able to access it through the mydlink web page but when I clicked on the advanced settings, it wouldn't log in. I tried running the setup from the CD but it said "There was a problem saving your settings. Click Next to try again." That never worked. I tried a hard reset, no luck.
View 3 Replies
View Related
Dec 26, 2011
I'm using a Dell computer CPU i7 8 gig of ram. It is wired in to the router. Why does it take so long to log into the router and bring up the different pages in the settings. I have never seen a router take so long. I have not updated the firmware version 2.02NA. I have not upgraded it yet. oh I have a cable connection. When I surf the web the pages come-up fast.
View 13 Replies
View Related
Apr 8, 2012
I need to change my DCS-942L camera settings remotely when I am not connected to my home wireless network. When I am at home, I just type in the local IP address of the camera (192.168.0.100) into my browser to access the firmware. How can I do the same when I am away from home and obviously not connected to the local WiFi?
View 1 Replies
View Related
Nov 21, 2012
I have the DIR-655 (H/w Ver B1, F/W Ver 2.05NA) set up as router on my network (TWC/RR - modem is Motorola SURFBoard 6121 - modem only, no router or other services provided). I have configured the router sufficiently to allow all computers on the local network to access the Internet, and have configured the DHCP server on the router to provide IP addresses to the local network. I have configured the router to provide the DNS addresses for my local DNS resolvers (so that I can provide DNS resolution for an "internal" domain). Configuration specifics available on request, but everything mentioned so far is working satisfactorily, at least so far.
So, my question: The "Local Domain Name" setting on the router, as indicated in the documentation, provides a connection-specific domain name when DHCP supplies an IP address to the local system. This setting, however, is overridden if the ISP provides a domain name when it assigns an IP to the WAN connection. I have verified by experiment that this is true (no matter what I put in the Local Domain Name field - whether a valid domain, or blank - the local machines receive the domain name supplied by the ISP.I wish to modify this behavior. I wish to have the router provide the domain name specified in the Local Domain Name field *regardless* of what the ISP provides.
View 6 Replies
View Related
Feb 11, 2012
I expect to receive a new Kindle Touch w/WiFi next week.I presently have my RR modem plugged to the DIR-655 and one Ethernet cable from the router to the PC and another (a 40' Cat6 Ethernet cable) going from the DIR-655 to a bus and then to an Internet-ready HDTV. I'm able to watch NetFlix streaming movies.I'm wanting to know step-by-step for each setting for my DIR-655 so that I can download books via WiFi to my Kindle Touch from Amazon's library.I have Windows 7 Home Premium 64x Media Center Player?
View 3 Replies
View Related
Dec 19, 2011
What would cause my Dir-825 to magically revert to it's default settings? This is the 4th time this has happened.We rely on a Verizon Network Extender for phone service. It requires an internet connection to function. When the router brain-farts, we don't have phone service... and we don't know it until we try to call out, or try to use the internet. We went to bed last night with the router working and woke up to it not working. It's just my wife and I here. I haven't seen the dog showing any interest in jacking with our computer gear.
When I access the setup utility and go to Manual Wireless Network Setup, the Wireless Network Name has defaulted to dlink, and Security Mode is None. I have to re-enter my personalized setup info, (because that is what our computers are looking for), then all works fine again.I'm a savy XP user, my wife has Vista (yuk) (she doesn't know any better; her daughter installed it).We are Comcast customers. We own a Linksys CM-100 modem. (When I connect direct by hardwire, (i.e. bypass the Dir-825 router), from the modem to any computer, or the Verizon Network Extender, they function just fine. Setup utility for Dir-825 says we have Hardware Version B-1; Firmware Version 2.02NA.
Set Firewall settings to Endpoint Independent for TCP and UDP. I see other posts addressing similar issues of reversion to default settings... but there don't seem to be any clear resolutions of these issues. On 2010-03-11, gunrunnerjohn posted, "I think there may be a shadow file that's actually in the FLASH that needs to get written back to make the changes stick. I seem to recall there is a command to sync the RAMDISK copies to the FLASH." Yet there is no more to this thread.
View 3 Replies
View Related
Jun 11, 2011
I just purchased a 100M fiber line to go with a brand new D-Link DIR-655 router. Before plugging in the router, I tested on my laptop directly from the modem and had great result speeds of 98M/97M. I connected the router, then plugged my laptop to find I was only getting speeds of about 10M/6M. This was true for both wired and wireless connections.
I took a look at the router settings. I turned off QoS, but that didn't work. One thing I did see was the WAN was set to auto. I attempted to change that to 100mbps or to 1000mpbs. However, when I did that my modem light that shows a 100M connection is active turned off and I couldn't get internet. I was only able to get a connection if I left that on auto. Is there a setting somewhere that is limiting my bandwidth from the router?I reset the router twice and checked to find I had the latest firmware. Is there something that I am missing? I have always been a Linksys fan, but wanted to see how D-Link is.
View 7 Replies
View Related
Sep 4, 2011
We nave a new DCS-932L, and a several month old DCS-930L, both with latest firmware.I have set up both the same, enabled Motion detection across the two middle horizontal bands (fully across); no email; ftp enabled; Video set to 1 fps, quality="high", java.The DCS-932L seems to ignore the frames per second settings; motion brings several seconds of 15 fps, generating maybe 50 image files in a burst.The DCS-930L on the other hand also seems to ignore the settings in the opposite direction, and sometimes has trouble providing even one complete frame.
View 4 Replies
View Related
Apr 10, 2011
I have been trying for days to get a HP Photosmart Plus B209a wireless printer to work with my D-Link DIR-655.Going through the HP setup cd for I get to the section where it wants to hookup a usb cable to get router settings and finds my network and then I put in the password. Then after looking for a bit it says it can't find the printer.Looking at the wireless status page it says the ip address is 0.0.0.0.Reading on HP's website it says that you must have the router set to broadcast the SSID, I believe mine is set to hide. How would I go about changing it to broadcast AND would it mess up all my other settings changing it to Broadcast, meaning will I have to reconfigure the other computers again? Do I use the set up wizard to edit things or is that for first time set up ?
View 5 Replies
View Related
Aug 26, 2011
How to keep the time and date field (in camera settings) to stay? All my other settings seem to be working (and staying) but unless my camera is on all the time, it reverts to 01-01-2011 with a 12:00 am time once I plug it in. I only hook the camera up during the day while I'm at work, so I can keep an eye on my older dogs. I'm not able to view the live video at work (ActiveX issues) so I tried to set up an email schedule so I would be sent pictures.
As a last resort, I went through the wizard set up one more time, thinking I missed something the first time around, but that didn't work either. I am not impressed with D-link support so really don't want to call them unless I absolutely have to.
View 2 Replies
View Related
