WE've been using the Asoka pluglink adapters we received from at&t and they worked very well to where we can move them anywhere in the house. Now they've just stopped working all together. We didn't change anything to where they stopped working. But the weirdest part: they just started working again yesterday and now are not. I did not influence any of these changes and I'm not sure where the problem is. I've tried swapping out the adapters cause we have three and we only use two at a time. Our current setup is a linksys wrt54g with ddwrt which is what we plug one of the adapters to and the other is in my room cause we are out of range for wireless. When testing the network it says we join an unidentified network but have no internet access.
I have a problem concerning my Netgear XET1001 85 MBit/s Wall-Plugged Ethernet Adapter. My personal computer in my room is connected directly to our router and I'm getting arround 14-15Mbps download speeds. My parents computer is located in a different room and I bought them the Netgear Adapter thinking this was the most effective and simplest solution. Better than a Wifi-Adapter. I cost me quite a lot too to be honest. The problem is my parents are getting speeds of 0.05Mbps and the browser often doesn't even load the pages completely. To me it seems like the data can only travel through the thing very hardly if at all.
We thought this might have to do with the age and RAM of our computer. (512MB of RAM) So we bought a new one a couple of days ago. Turns out: nothing has changed.
The Wall-Pluggs are connected directly to the outlet by the way. I'm trying to give you the most amount of information I can think of so one more thing might be important. Yesterday I brought my parent's PC into my room, connected it to the Wall-Plugg and got speeds of 5Mbps. Although this is better, it's not what I bought this thing for. Even a WIFI connection would be faster would'nt it?
having a problem with my Linksys wireless adapter: the light will flash a few times when I plug it in, then it will turn off. It won't let me connect to the internet or my printer.It's not the port: it is recognized when I put it in any other port, but it still won't connect. I think it's a virus, but my antivirus software isn't showing anything when I run a full scan (I use Malwarebytes Free). I'm gonna put AVG on a flash drive from another computer and try to use that later today, but right now I've been thinking that I might have to back everything up and reinstall windows.
-Windows Vista- Home Premium
-Linksys Wireless USB Network Adapter (I think it's WUSB600N, not sure though)
earlier i got a BSOD and researched this and it turned out to be due to my wireless network adapter. I didn't think anything of it until i tried to connect wireless to the internet (usually use Ethernet) and i couldn't due to problems with my adapter. I have tried uninstalling and reinstalling the network adapter, i have tried drivers Etc with no luck
I just bought a wireless adapter for my PC, linkseys ae1000. It's been approximately a week, and the computer has been on most of the time...roughly 8-12 hours of a day, not in use the whole time, however. Then today when I booted up my computer, the wireless adapter didn't turn on! It's like a little USB thingy...and when i took it out, it was extremely hot, even though it wasn't doing anything! I tried multiple USB slots as well, to no avail...What basically happens is I put in the CD-rom installation disk, then when it prompts me, I plug in the adapter...and then it takes me to the connect to network screen, at this point the adapter has it's little wireless light blinking, then I try to connect to network, the light stops blinking and turns off, and it just tries connecting to the network for an eternity.
I just purchased a Medialink MWN-150N Wireless N USB Adapter. I have never had wireless on this computer and I have always been hard lined directly to the router without any problems of connecting to the net. I installed the software, am able to connect to my network with full bars, but have limited/no activity. I unplugged everything and hooked up the modem 1st, router 2nd, and turned on the computer last, but no luck.
bought this wireless adapter. installed drivers and everything but it doesn't work. when i plug in the device, the network icon in the system tray doesn't change. it won't let me choose any wifi signal. tested it on other computer and laptop and it works no prob. i used to have one before and i remember it worked okay but now it's not working anymore.
I have an older computer (hp compaq) that was wiped clean and windows xp professional (version 2002 service pack 3), Internet explorer and Microsoft were installed. I took the USB wireless adapter (belkin 54g usb network adapter, which stills works on my old computer) and installed onto the new one. It shows good strength but is limited or no connectivity and will not allow any Internet access. ipcong/renew, win socket commands and all my settings are correct.
above usb adapter first worked fine with windows7 then i used belkin G usb adapter but it is not worked, so again i switch back to 11n usb adapter but not it is not connected?
when I couldnt turn on the wifi from the switch. It remained orange(which is its off state) and so I went to the device manager and the wifi adapter was shown there but with an exclamation mark. Showing the error "the device cannot be started(code 10)". So I uninstalled and rebooted, only to get the same error when it got reinstalled.
I have a D-Link wireless adapter (DWL-G122) that I have been trying to install on a Windows XP computer. After various uninstalls and reinstalls of the drivers and programs that come with it, I have found currently the best way to get it to work is leave the D-Link programs uninstalled and have Windows install the driver itself.The problem is, it doesn't seem to keep the drivers on restarting, so every time the computer is restarted, it must be installed again. This is not ideal.It occasionally worked when I installed from the CD, but the D-Link programs that would install with the drivers created problems of their own.
I can't seem to connect to any wifi. I opened my device manager and looked under network adapters ant there is a little triangle with a ! in it. What can I do to fix this???? I'm a college student who needs access to the internet badly
To get this Wireless adapter RNX-N150UBE to work we have to go to the device manager in Windows XP Pro, uninstall it and re-install it every time the computer is started.
I cannot connect to the internet wirelessly on my Toshiba A205 laptop. I've run the diagnostics and it seems the adapter is not working. When I look at the system I can only see the Marvell Yukon PCI-E ehternet controller. That is not the wireless, is it? I think I could change it but I'm not sure which to get and where it is.
I have a Belkin F5D7050 USB Wireless G network card and it won't connect to windows xp. It tried using on Linux (ubuntu 10.04 live cd) and it works perfectly. But when I boot into windows, it doesn't. I have installed all the drivers and software I could find for it. But the programs for it don't open at all and for some reason i cant even configure it using windows "Connect to". (You know how usually you get the little wireless icon at the bottom of the screen and stuff)
I have a realtek wireless usb adaptor on my hp desktop that was working until I took it out of the usb on the front of the tower and plugged it into a usb on the back of the tower. Now I can't get internet at all even if I move it back to the front! My network doesn't show up under connections. Both the playstation 3 and the netbook are picking up the wireless signal from the router.
I have a Realtek RTL8187 Wi-Fi adapter. I've got the latest drivers, and can configure my access point with WPA2-PSK, yet I'm unable to connect when using this authentication. I can keep the system open and it works great, even with WEP encryption, yet WPA2 does not seem to work.
I reformatted my father's laptop, upgrading the OS from Vista to Windows 7 but now the wireless network adapter isn't working. Basically, the laptop doesn't know that it has wireless. In device manager there is an exclamation mark against the "Atheros AR5007UG Wireless Network Adapter" entry. I've tried uninstalling the driver and reinstalling it, restarting the computer, updating the driver etc but it always fails to install the driver correctly. I don't know for sure the model of the network adapter, (windows tells me it's atheros but I'm not convinced seeing as the driver always fails to install) so I can't go to the manufacturer's website to download the latest drivers. I opened up the laptop but couldn't see any brand names on the network card. I don't have the cd's with the drivers on them.
So I have an HP Pavilion dv9000 laptop with window 8 installed and when I try to connect to the internet I keep getting an error that says the "Ethernet" Adapter is not working properly. I used to be able to go on the internet and then my dad had my computer for a while and now it's not working.
My laptop won't connect to the internet at all and status shows limited access to router. It was fine a few days ago until a Windows update. I did a system restore on it back to before the windows update and the internet was working just fine but then there was an automatic windows update again and the connection is gone again. When I try to troubleshoot it says the network adapter is not working properly. I'm currently using the main computer in the house. I can't access any network at all on my laptop and I'm nearly in tears. This has happened before about 7 months ago after a windows update. At that time I did a system restore and reinstalled the updates and it worked just fine. This time nothing. I have tried to check for updated drivers for the network adapters but windows says I'm running the recent ones.
The laptop is an HP. The network adapter is having the common problem of being unable to connect to secured wireless networks. I know this is a common problem and I HAVE tried everysingle suggestion posted on this forum, including but not limited to: reinstalling drivers, making sure the adapter is configured for the appropriate gateway and even doing a full restore to factory defaults. NOTHING has worked.
I have a problem with a wireless adaptor on a Toshiba Tecra (A11-1EE - PTSE0E-065052EN) running Windows 7.The wireless adaptor works fine but every now and again it will just stop working. The operating system says that the adaptor is turned off but it isn't. I've checked the driver but it is up to date.I have to disable the driver and then enable it again and then the adaptor begins to work correctly again.
I turned on the monitor (I had left the system running) and it said that it had recovered from an unexpected shut down. It didn't automatically connect to the wifi, so I opened the connections window to connect to a network and it said "Windows cannot find any networks." I refreshed several times and nothing happened. I clicked the option underneath "Diagnose why windows can't find any networks," and it came back with "This computer does not have a wireless adapter installed and configured." I then opened up the device manager, and under network Adapters, the only thing is "Intel(R) 82566DC-2 Gigabit Network Connection." I checked it out and it says it's working properly, and I believe that this adapter is for when you actually connect a cable directly to the PC.
I use windows 7.Ever since a couple of days ago, I have not been able to connec tot the internet.It says "not connected" and it says "limited access" next to my router, with 3 bars.Ipv4 Connectivity: Not connectedIpv6 Connectivity: Not connected
I'm using HP Pavillion dv3-2165ee Win7 32bit with Atheros A9285 WLAN adapter.problem is that my notebook is not detecting any wireless network.it is as if my adapter is turned off. when i switch it on, Bluetooth works but WLAN dont. I tried turning it on/off couple of times but it didnt work. I'm not sure if is just a timing, but it started when im on a cafe when i plugged in my friend's flash drive then after a while i lost all available wireless networks that time.At first i assumed it's because of virus, so i tried driver reinstall/reformatting/recovery disc but nothing solved the problem.
When I browse the net, i saw this Xirrius Wifi Inspector so i downloaded it with a cable connection then when i used it, it was able to detect the wireless network i have in my house but just for a couple of seconds, and the network disappeared.I tried other drivers, but i didn't work. As i've said earlier it is as if turned off.I've run this diagnostic test from Atheros driver and got this result with my WLAN switched on.While on this screeny, you can see in HP Wireless Assistant that my WLAN & is enabled, but at the same time Windows Mobility Center is indicating that my WLAN is not just turned off but it is like there is nothing there.
The wireless adapter keeps saying unidentified network, I can connect from other computers and they are all working fine.
Edit: Forgot to mention its a ASUS wireless n-15 adapter, also the system is a Windows 7 64 bit. Also, has a ip address 169.x.x.x which i know means no internet connection.
I have a dell Inspiron N5010. Recently I installed windows 7 ultimate 32 bit and after that my wifi is not working. It was working perfectly with the same operating system previously but after the new installation the wifi sign from the desktop has disappeared. I install wlan broadcomm files for the wifi adapter but with no results. When I press the wifi button on keyboard it shows bluetooth device not discoverable.
while my younger brother borrowed my USB adapter to fix somerhing on his computer (he normally doesn't have net), I was using a flash drive. I had left the drive in, and my (very heavy) DVD drive was dropped on it, breaking both the front USB 2.0 ports and the flash drive. So I had to put the adapter in the back ports. The first few hours were fine, then net cut out. I repaired the connection, only to have to keep repairing every 30 seconds to 10 minutes. Then it stopped working altogether. I've attempted re-installing drivers, but when I do, my computer tells me that the driver I'm installing from my hard drive "Has no information on my hardware", but it's the correct driver and version for my hardware.
My Internal Wireless adapter not working each time boot up I am using Windows 7.
I have to diagnose each time and click fix for it to enable the internet to be on. Why is it disconnecting me from connecting to the internet all the time upon startup ?
Here are the details-
Diagnostics Information (Network Adapter) Details about network adapter diagnosis: Network adapter Wireless Network Connection driver information:
Specs are as follows: Windows 7 Ultimate 64-bit 2.26 P8400 GHz Intel Core 2 Duo 4 GB DDR2 400 MHz RAM NVIDIA GeForce 9600M GS Graphics
And of course, the Atheros AR928X Wireless Network Adaptor.It seems that no matter what I do wireless capability cannot be enabled. I tried turning the wireless capability button on and off but to no avail. Then I pressed FN+F2 and it didn't fix it. In both those situations a box which displays the status of the wireless LAN connection comes up, however, it reads "OFF" regardless of me performing the above two "fixes." According to my computer the card is enabled and I tried uninstalling and reinstalling the device driver but nothing changed.
I have a NETGEAR XAVB101 Powerline AV Ethernet Adapter and an AMD Llano build HTPC which refuses to work with each other. The power plug works well with my Gateway NV79 laptop and even my Intel Core i5 -2500K desktop, without any problems! I have also used it to connect to my Roku, Yamaha Network Receiver and other networked stuff and all worked great, just the HTPC seems to have issues connecting to the network!The HTPC is AMD A6-3650 on a ECS FM1 A75 Mobo with Integrated Realtek RTL8111E Gigabit Ethernet Controller, which is what I am connecting the power plug to! Only the connection over the power line adapter does not work, it works great with both a connection directly from the router and with wireless!
The adapter has a 128 bit encryption push button security feature which I'm NOT using. When I connect it the HTPC tries to connect and fails and shows the network as connected to an unidentified network. My LAN drivers on the computer is all up-to-date.
I cannot stay connected to the internet with my Asus. When I troubleshoot, it says the wifi was not on, turns it on, but I lose connection again and then can't get it back. Brand new. No hardware button.
