i want to access my application via FTP on internet. so i type the my ip address is a url.. but it will not get my ip . it ll says 421 login incorrect error ... how to solve this problem...
View 1 RepliesI have an older Buffalo NAS that I use as an FTP server. Never had any problems, even after I changed my ISP to Qwest DSL last week. But I had wireless problems with the modem, and they swapped out my modem, and now with the new modem, I get a 421 Login Incorrect error when it tries to connect to the FTP Server address Though this version of WS_FTP Pro is not really compatible with Windows 7, I have been using it successfully up until my modem change.It keeps giving me a "421 Login Incorrect" error. I have reset the password on the NAS, and the modem is configured to accept FTP traffic via the NAS which is connected via Ethernet to the modem. All settings are the same as on the old modem, but no FTP.
View 5 Replies View Relatedmy yahoo password not working
View 1 Replies View Relatedcant sigh into yahoo account e-mails
View 1 Replies View RelatedI have a website account with fatcow. I created the website with Dreamweaver software and uploaded it to fatcow via port 21.My internet connection was via xplornet and I had no access problems. I upgraded to xplornet's new g4 system and now I can no longer access my account online or upload to my website.We have two computers. The first is a desktop system that has the dreamweaver software. The second is a laptop which connects wirelessly. We share the signal through a dlink router. The modem is a viasat Surfbeam 2 residential satellite modem.1. When I attempt to login to the fatcow control panel, the tab shows successfully authenticated and then re-directs me back to the login page. This happens on both the laptop and the desktop.
I have tried bypassing the router and the problem still exists.I took the laptop to the computer center and I can login to the account no problem.I used a free proxy server page on the internet and can login from my home system on my desktop no problem.I have completely turned off virus scan and firewalls. It doesn't work. I have tried IE7, Chrome, Firefox and they all have the same problem. The laptop runs IE8 and has the same problem.I can ping the page successfully. I can traceroute the page successfully. I can't nslooup any site at all. I get the domain not existant message.My ip and dns settings are the automatically find option.I have renewed ips and dumped the dns cache.Using alternate dns addresses doesn't rectify the problem. When I attempt to upload via dreamweaver, I connect but within seconds I get a Dreamweaver message that says "Connection to remote host has been lost. Click refresh to continue" and the log reads "FTP Error. Dreamweaver could not connect to server." I haven't taken my desktop anywhere to try to see if it works on a different network. I'm in a remote location (hence the satellite internet)and it is an hours drive to the nearest private internet connection and a 2 hour drive to the nearest public connection.
We have a Linksys WRT120N wireless router set up at one of our small offices. I noticed recently when trying to log in to the router to make some admin configurations that it will not accept the login credentials when trying to log in from IE10 browser. Works fine from Chrome, IE9, ect. logging in to a linksys router with IE10?
View 3 Replies View Relatedso I've been getting disconnected from the Internet many times in a day,can't even count it and it's starting to bug me as I have online quizzes and assessments that I need to complete each week. Whenver I get disconnected I'll have to connect again to the modem (wireless) and each time I am told that I have the wrong security key but its correct, I am sure! It's only when I switch off the modem or my computer and restart either both or one of them that I can (by luck i guess?) get the Internet back again. I've been told by a friend that my period/session expired so I can't connect..and that the modem keeps relisting/refreshing (sry forgot what the exact term was) every hour or smth? What exactly is wrong[CODE]
View 1 Replies View RelatedI have a wi-fi adapter with incorrect MAC address FF-FF-FF-FF-FF-FF.
Adapter has a Realtek RTL8188SU chipset.
Is an any program to flash a new MAC in my adapter?
Incorrect password attempts in ACS 4.2.
1) Can I specify the time in "Incorrect password attempts" ? means if the 3 incorrect password attempt was made with in 05 minutes, then only the account will be locked ?
2) Is it possible to RESET automatically the "Incorrect password attempts counter" (when the account locked) into ACS?
I'm polling a few thousand locations using IP SLA, I have responder enabled on all destinations, and I'm using 60 byte voice packets with a QoS policy.When I run an IP SLA Summary availability report, I have a bunch of locations showing 9% availability 8.5% etc. When I go to the actual collector, and pull up a graph of the same time period, that graph shows 100% availability.
Same collector, same data, just different views giving completely different results. I have to assume that the IP SLA summary report is wrong, these sites were not down 90% of the time.
Just a random though to go with that, I do have the IP SLA to only pull information during the locations operational hours, and I did pull the report from midnight to 11am, the statistics should have been gathered for 4 hours of the 11, which is still higher than 9%, and I would expect all of my locations to report like that, not just a few hundred.
All of the devices are similar in hardware and IOS, and I have verified on a handful that IP SLA responder is enabled, and I see the connections, I have also verified the source configuration via command line.
I am running Windows 7 and have a Ralink 802.11n wireless LAN card. I have had no issues with this and a month ago my roommate randomly decided to switch from Verizon to Brighthouse. This switch took 3 weeks but everything is hooked up and working (almost) fine now.
My computer picks up the wireless signal fine but when I type in the password it says the password is incorrect (Ive tried 100 times, case sensative, yada yada). That same password works fine for my roommates computer to connect and fine for my iPhone to connect. If I connect through an actual cable, the internet works fine on my desktop.It seems to me like an issue with Windows. Windows is updated and all of the appropriate drivers and updates are current as far as I can tell.
I have a NAM appliance that generates captures with incorrect timestamps. It looks like it's adding 3 extra zeros after the period, turning miliseconds into microseconds.
Here are the capture settings, and attached a sample capture.
i have two servers that is Primary domain Controller and File Server. When i remove the client computer from the domain and try to rejoin the domain again it refuses, when i ping it replies. i can not assess files in the file server It prompt"Logon Failure: the target account name is incorrect" Suprisingly When i logon in other clients its OK. but some clients give ths said error though the communication with the server is fine
View 1 Replies View Relatedi used to remote desktop connection. when i log on to remote computer it say that username or password incorrect, but i remember clearly about my password and username
View 3 Replies View RelatedI was upgrading the FW to 2.07 and after waiting 180 seconds, the router didn't came back, I reset the router and now got a Firmware Upgrade System Ver 1.0.0.2 Date 2009/12/07 Screen when typing 192.168.0.1. Tried to upload all the firmwares starting with 2.00NA and always got the Incorrect hardware ID image, please Check! message.. I can't get the *D-Link Router Recovery Mode* page or any other page. Looks like the firmware update wasn't successful and the router is not longing working, need to find out how to recover from a faulty firmware installation.? Also I open a case with DLink Tech Support, they told me to call Tech Support but I can't access the numbers from my country. I already answered their email like 4 times that I can't access the # and they keep telling me to call the #. Anyway what else I can do to recover the Router.
View 9 Replies View RelatedInitially there were 3 SSIDs configured but all of them were assigned a single interface and this interface was configured with the controller management IP address as DHCP server so that the WLC could assign IP addresses to wireless clients, guns and printers etc.
Issue: As part of PCI initiative, we decided to segment the traffic in multiple subnets based on type of wireless clients; so now there are 3 interfaces configured and each SSID is assigned a specific dynamic interface and each interface is configured to use the controller management IP address as DHCP server.
There are 3 scopes configured for each of the dynamic interfaces/SSIDs and DHCP proxy is enabled but wirelss clients are still being allocated IP addresses from the original DHCP scope that was associated with the dynamic interface originally assigned to all 3 SSIDs.
I verified the following:
1. Each SSID is assigned a different dynamic interface (Users, Voice and Handhelds)
2. Each dynamic interface is configured to use controllers management IP address as DHCP server
3. DHCP scopes configured with correct network information for each dynamic interface and enabled
In the Ciscoview, the uplink SFP interfaces of 2960S stack are represented incorrectly. The two uplink interface should be Ten1/0/1 and Ten4/0/1 but proved to be Ten1/0/1 and Gi4/0/25. There is no 1G SFP module, so that the interface gi4/0/25 doesn't exist. [code]
View 3 Replies View RelatedHow to Configure "Incorrect password Attempts Disable login for 30 minutes after 3 successive failed attempts" on ASA-5510???
View 3 Replies View RelatedI'm not sure if this is a recent issue for our setup, but I've only just noticed it. Although most authenticated users are shown by their correct user names (which are required for 802.1x authentication), a few users show up in the WCS reports as "anonymous", and one as "anonymous@myabc.com", which are not valid usernames on our network.
I can track these users by MAC via our network registration database, but have not yet figured what makes their systems unique. All three in yesterday's report are Win 7. I don't see anything strange in the RADIUS logs, but have not yet caputured "debug" traces of wireless authentication from an anonymous user.
We are running WCS 7.0.172.0 , with a pair of WLC 4402 controllers running 7.0.116.0 . Our WPA2 Enterprise auth uses TTLS/PAP, with the SecureW2 supplicant for Windows.
Model : TD-W8961ND
Hardware Version : V2
Firmware Version : 120703
ISP : [/COLOR]
Region : United Kingdom
Model : TD-W8961ND
Hardware Version : V2
Firmware Version : 120703
ISP : Plusnet
I bought this recently on EBay and it works fine. I have just checked the firmware version and it displays as 120703 rel 29722. This version doesn't appear amongst the downloads - the most recent is 120427. Has somebody upgraded to the wrong software? Should I upgrade to 120427?
I was using a wrt54gh which is no longer in working condition.. so i bought an E1200.the problem i face is when i try to restore my new router which is the E1200 frm the backup file frm my previous router the wrt54gh which is saved in my computer i get the error message " THE IMAGE FILE IS INCORRECT ".
View 4 Replies View RelatedI have a problem on a Cisco ASA5520 version 8.2(5). A customer has set up a syslog to keep tracks of tcp sessions made by vpn users. On the syslog we filter %ASA-6-302013 and %ASA-6-302014 log messages, respectively: Built inbound TCP connection and Teardown TCP connection. When the connection is made by a vpn user, at the end of the log line you see the vpn username which should be the same in both the messages for the same connection. I have verified that when a user, let's say UserA, disconnects from the vpn, their tcp sessions are not properly closed; if another user, let's say UserB, establish a VPN immeditaely after and gets the same IP address previously assigned to UserA, the log sessions are recored with UserA in the %ASA-6-302013 message and UserB in the %ASA-6-302014 message. I presume this is due to the fact the tcp sessions are not tore down when the first user disconnects and it looks like a bug to me but I didn't find it referenced anywhere. Is there a way to have all tcp session tore down when a user disconnects the VPN connection?
View 2 Replies View RelatedI am attempting to monitor bandwidth utilization of the WAN port for the RV180 via SNMP and I am getting strange results. If a 256MB file is transferred from a remote server (without compression), the ifInOctets counter doesn't increment by anything resembling 256MB:
$ snmpget -v2c -c public 192.168.1.1 IF-MIB::ifInOctets.5 IF-MIB::ifOutOctets.5
IF-MIB::ifInOctets.5 = Counter32: 365402138
IF-MIB::ifOutOctets.5 = Counter32: 32610053
[Code].....
I'm reasonably certain that the .5 interface is the WAN port based on the value of ipAdEntIfIndex.X.X.X.X, but even if that were not the case, none of the other interfaces increment by a value close to the amount of data transfered. SNMP monitoring of a WAP121 on the same subnet returns expected results. I can only assume that SNMP on the RV180 is completely broken.
The router has the latest firmware available (1.0.1.9). There is only one network connection and the RV180 is the default gateway for all internal hosts.
I have an ASA 5505 with software version 8.2(1). It is making DHCP requests for IPSec clients that connect to the ASA. The DHCP requests packets the ASA makes have an extra '00' appended to the hostname field, and the length field is the size of the hostname + 1. The DHCP server is Microsoft Server 2003 and this causes the hostname to be registered with an unknown character which appears as []hostname. Then when server 2003 tries to update the DNS record, it fails because of the invalid character in the hostname. Is there anyway to have the ASA have the correct length for the hostname field in the DHCP packet, or a workaround that will solve this problem?
View 5 Replies View Relatedhow the Cisco VPN works, as i already have a post on here about not being able to connect an android device to my firewall, i am now struggling to get an Iphone 3gs iOS v4.3 (8F190) connected to the VPN Either.I have checked the Network (client) Access settings on the firewall, and confirmed the group names im after including the protocols it supports L2TP is Disabled so it looks like i can only connect via IPsec.so i fill out the required details in the IPhone but keep getting a message back from the phone
"The VPN Shared Secret is incorrect"
Now im sure i have this right as i use the same details on my laptop which connects to the VPN perfectly fine. but i am starting to bang my head against the wall, no matter what i try and do i cannot seem to get either device to connect to the firewall.i have a pair of ASA 5520 boxes running cisco software 8.2
When we setup a connection between two hosts we receive the message "TCP checksum incorrect" , This is between a settop box on the outside and a server inside the firewall. This STB used to communicate with the server on port 443 which is NAT-en to port 12697.With a new settop box image which uses on the inside and outside port 12697 we receive this TCP checksum incorrect on the Firewall with wireshark.
Strange is that on the outside of the firewall we see an MSS of 1460 and on the inside it is 1380 (don't know if there is a relation with this and the issue we have)
I received a Linksys E1200 from a friend who careless tried to upload an incorrect configuration. After that the device became use full. It don't work at all.
View 1 Replies View RelatedRegion : France
Model : TD-W8968
Hardware Version : V1
Firmware Version : TD-W8968_V1_120926
ISP : SFR
Device in question: siemans C610 IP voip phone
Configuration:
* The C610 is directly connected to TD W8968 via the ethernet port number 3 >> ethernet port number 1 is connected to the devolo homeplug 200AVPLUS . The PC is at the other end of the homeplug network
* The DHCP address starts at 192.168.1.100 - 192.168.1.199.
Symptom:
1. It takes a long time (about 2-3 minutes) for the C610IP to obtain the IP address of 192.168.1.100 after the synchronisation of the ADSL line is finished 2. In the DHCP client list, I could only see the IP address of the PC (192.168.1.101) but not the C610 IP. However, if I type 192.168.1.100, I could access to the configuration page of the C610 IP. - I only managed to see the C610IP once in the DHCP client list.
I tried to unplug -> replug the router but to no avail.
I am trying to setup VLANs and most of configurations are working ok now except IP address assignment from DHCP. If any computer in VLAN 120 or 130 configured with manual IP address, then all works fine. It can reach internal servers and the internet without problem.If the IP address is assigned automatically then any computer in VLAN 120 or 130 are obtaining IP address (strangely!) from VLAN 100. Because switch ports that connected to the computer belongs to VLAN 120 or 130, the computer cannot reach internal servers and the internet with ip address from VLAN 100 . All SVI interfaces for VLAN 100, 120 and 130 have ip helper-address option defined pointing to the DHCP server. No DHCP snooping enabled on all switches at this point. DHCP server have three scopes for the three different VLANs.
View 2 Replies View RelatedI have Windows 7 Home Premium on a Dell Inspiron N5010.
I have had this problem for several weeks, and have searched all over to find a solution (tried them all, but none have fixed it). I have a good wireless internet connection, and sometimes I use ethernet. Despite having such connections, my wireless internet icon doesn't change, as it seems to keep getting stuck on the icon which shows a red x over the ethernet image.
It will show the blue loading ring with the bars as it searches for a wireless connection for a little bit, but then it goes to the same, incorrect icon, even though when I put the cursor over the icon it says "Internet Access".
So far, I've tried deleting the Icon Cache and rebooting, as it was suggested that it could be potentially corrupted, but the internet icon stays the same. I have also tried searching for a driver that could be potentially related to the issue and uninstalling it, but it didn't work. The red x went away for a moment, being replaced by a loading blue ring, but then the red x returned (same icon image).
Is there a specific driver for the icon itself? I know I had to uninstall a driver then reboot to get my battery icon back after it mysteriously disappeared. I also have tried deactivating/reactivating my wireless connection by hitting the button, but it doesn't change.
Half of the time i have to stay at hotel due to business trip. The hotel i stay will provide free internet broadband with cable but no WIFI. Can i set up WIFI if i have router?
View 2 Replies View RelatedI am using PTCL' DSL in my country. I want to know how can i increase download speed of stuff from internet?
View 2 Replies View RelatedI have downloaded the firmware update "Ver.1.0.02 build 11" for my WRT400N from linksys.com several times. I then try to update my firmware on my router. Each time I try, I get an error message that says "Incorrect file path."
View 9 Replies View Related