I can't access the internet through my home pc. I can't setup a new connection because I'm missing the network icon. It was fine a few days ago but somehow somewhere I've lost the icon. I have tried to restore but couldn't bo back that far.
I'm using Fedora 15, in GNOME Shell, my mobile broadband connection was working absolutely fine, until I set the connection type to Connect Automatically using nm-connection-manager. Now, when I start the Fedora, the Top panel network icon shows red exclamation symbol and when I click it, instead of showing me available networks' list, it shows only "Network Settings", and when I open it, it shows GNOME 3's new Network Manager app, and it pops out the dialog saying that, "Current network settings service is incompatible with this version". And after a few seconds of log in, the shell freezes and all I can do is log out using Ctrl+Alt+BackSpace.
I'm facing this problem since I opened old network manager app using nm-connection-manager in the run dialog, and editing my connection to connect automatically.
After logging in to the shell I somehow managed to delete that connection from the same app and created a new one, but the problem still exists. How can I delete all network preferences (by deleting its configuration files from my home directory or something like that) and reset the GNOME 3's network manager to its default state?
Half of the time i have to stay at hotel due to business trip. The hotel i stay will provide free internet broadband with cable but no WIFI. Can i set up WIFI if i have router?
I am trying to confgure a VPN connection on a Cisco ASA 5505, and I am supposed to translate the inside network from 10.200 76.0 to host 10.1.4.204, and then from that scheme establish a VPN with the host 66.179.80.108 on network 192.168.50.0/24. I was told that this Cisco ASA appliace would be able to translate the network address as a mask in order to make the necessary connection with the other site connection.
Should i get a wireless adapter Or a wireless repeater Which would be better for a better connection?My router is down stairs and my xbox is upstairs.I could get the wireless adapter upstairs then do an ethernet cable straight to my xbox.
I'm using XP SP3. I'm trying to connect using the Local Area Connection for the first time. Up to now I've been using wireless but I'd like to get better performance.
Here are my current settings via IPconfig: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . :
[Code].....
I've tried releasing and renewing via IPconfig. Renewing gives me the following error message: An error occurred while renewing interface Local Area Connection : unable to contact your DHCP server. Request has timed out.
I've got limited connectivity. It's trying to send but cannot receive.
My laptop used to connect wireless very well. About 10 days, it lost the connection even though the wireless signals were excellent. I guess it might be due to a virus attack that disabled my wireless connection. I run System Restore on Networking but not successful.
Internet works in that I can get onto a site but not login ie banking - also can't get results once I get onto National Lottery site, login into Hotmail. The diagnostics log states it could not make an HTTPS connection but nearly every thread I have read mentions firewall problems. I don't have Norton, just Windows Firewall and Lavasoft Adaware, but turning both off doesn't change anything. My PC is a Dell, I use a Cisco modem and a Belkin wireless router for my kids to run their XBoxes, all have been fine for 2 years. [code]
I am trying to make 2 COMPLETELY seperate networks with only 1 internet connection. We have routers, switches and all that. But we need to know how to set it all up. there are 2 companies in the same office, each company needs their own network at which they can view eachothers files but in no way view the other networks files.
I have an internet connection coming into my house. The modem is in the basement along with the desktop computer and the wireless router is wired upstairs where coverage is the greatest. Could some tell me how I would make these connections/ hardware needed to have them all on the same network?
Purpose:From my Dell Inspiron 8200 laptop, I need to make this connection-A. Ethernet LAN port to connect to telecom transmission equipment for management and configuration purpose;B. Wireless USB module (150 Mbps) to connect to the internet.Problem:I cannot establish A & B connections simultaneously, as either A is busied out by B or vice versa.Question:How can I seamlessly connect to my transmission equipment (Via LAN) at same time connect to the internet (Via Wireless usb)?
I have wired LAN connection from my neighbour's router, and it is connected to my desktop. I somehow got the wireless connection to my laptop from the same place by entering a security number. I got the number through the wired connection as well. It was working perfectly working until recently. Now I cannot access the wireless, whereas my wired connection is working alright. is there any other way to connect this without asking the neghbour?
I have KPN Experia box.I made all the steps in the instruction book. the network is established successfully but the there is no connection from my Pc to the net.
I am using my LAN Connection for file sharing and internet on my Office Pc (Windows XP). I have a wireless external adapter (Alfa) which I use for WAN Connection. But my PC doesn't use the internet from WAN Connection till I disconnect the LAN Cable. I want to use LAN Connection for file sharing and database in the office only and Internet on WAN Connection.
how can I make the WAN Connection as default and to guide the OS to use this while the LAN Cable is still plugged in. I am using AVG Internet Security 2011 & it's firewall.
How do I make short cut icons for L.A.N. and Wireless Network connection in Windows 7 ? I wish to put them on Windows 7 Desktop or send to Windows 7 Desktop like you can with Windows XP.
i want to access my camera from my internet website, am using dynamic internet IP address "it's changed automatically every time. so i thought about the MAC address of the IP camera, i found some websites use the MAC address to link the camera [URL] and [URL] i want the configurations that i have to do to make this workout without static IP and without using a computer between camera and internet router.
W7. Internet connection is through BT Home Hub2 and is hardwired. No problem at all. But my wireless connected BT internet radio and my wife's Kindle can no longer connect to the internet. The radio says connecting to network but does nothing. I have changed nothing I am aware of. I have looked at the BT Home Hub Wireless set up page and the settings are Using WPA and WPA2 and the correct wireless encryption key is there. Channel selection is automatic. I have changed that to 3 other suggested channels, no result. Frankly it is all Greek to me and I do not know what I am looking at. how I reconnect the Kindle by wireless and the internet radio? (I know I can use a USB to connect the Kindle, but not the radio).
i just managed to config the Cisco 877 and send it to my client,when the client connect the router from his location the router can't make VPN connection to my HQ office,i can connect to the router using the external IP adress,i tried to reset the VPN tunnel but no avail,
i have a 5510 with SDM 8.2.5 from clients connected to LAN i cant open a VPN connection! (using windows client L2TP or PPTP) there is not rules tho block this ports, why i cant connect?
i have router 3845 and then it's connected with pix and then its connected with vpn tunnel to the customer router. i am here trying to make vpn connectivity for devices. so on router i did static nat statements 10.124.90.124 10.200.200.1. this type of six statements i wrote for six devices. on the pix i did
i have one question that i need to use physical subnet or nat subnet for crypto map acl? and also on the customer router which subnet they can use as well nat sunet or my router physical subnet?
My question is how can i turn this adapter that i get internet from for my desktop INTO wifi so i can use my tablet?right now the desktop is the only computer with internet since it has an adapter.what do i need to make a WIFI signal from the computer? is there a usb stick or router i can buy?
I require to connect a "css11501" two core switches to provide redundancy to the load balancing service and would like to verify this possible (Does the spanning-tree protocol officer for load balancing?)
I'd like to enable client to router VPN connections. I have a question how to make any sucessful VPN connection to RV220W. From all the tests I made only SSL VPN on Windows XP x86 client machine was working.
For IPSec VPN I always receive this message: [rv220w][IKE] ERROR: Could not find configuration for XXX.XXX.XXX.XXX[500]. I tried with windows and shrewsoft vpn client.
Can't make SSL VPN to work in Windows 7 x64 client because the drivers are not digitally signed. It only works in Windows XP x86 but this is not acceptable. I need universal solution for win clients.
I also need working solution for Android Phone? Router firmware 1.0.3.5. I also tried this step by step guide. No go.