Can Give DC 1 Nick / Make It Accessible To 2 Vlans In Environment
Feb 25, 2013
I have a domain controller witch is in a C7000 enclosure, the ethernet switch in the rear of the enclosure has channeled the ports to our core switch ( Hp procurve 5400 series ) for better bandwidth.My problem is can I give this DC 1 nic and make it accessable to 2 vlans in my enviroment. ( how do I do this )The channeling of the ehternet switch in the rear of the C7000 enclosure makes it impossible to give just that one DC access to the 2 vlans , cause the other servers also go over this line.
I have a Motorola Affix and am using the app printershare to print from my phone to a network printer at home.. it works great.. but I want to know if there is a way to make the printer accesable from the internet so I can print from pt phone when im not home and connected to the network...accessible
I have a question that�s been bugging me and that internet searches didn�t quite explain and that is how do I make a resource available publicly e.g. web serverAll I hear so far is register a domain name but that doesn�t quite answer the full question. Id like to know exactly what happens when a user types in the url of my web site and how their traffic gets to me. Is it.. get a static ip from my isp then provide this to the domain name registrar and that it now every one can access my site?? Seems to simple.
Would it be possible to make a printer accessible from internet? Need to print a lot of batch printing from my cloud application , in that case can we direct this print job to a specific printer over internet ?
I have IIS running in a machine inside my network and I would like to make is visible to the world wide web.To do that, I created a website in the port 8787, which is accessible when the user types 192.168.0.126:8787 in the browser. Of course it works only when the user is inside my network.(IIS running over windows server 2008 OS)Now I want to make it visible to the WWW, so I created a rule to make a port forwarding to it:I went to: Advanced > Virtual Servers and created a rule with the given information:
enabled Name: website private ip: 192.168.0.126 protocol: both private port: 8787 public port: 8787 Schedule: always
This rule created automatically a firewall rule
Enabled Alow Source: WAN * Destination: LAN 192.168.0.126 Protocol: * Port range:8787 always
Unfortunately it isn't enough, if I type myPublicIp:8787 I can't access the website because I either get "connection reset" error or a timeout.I pluged my computer directly in my modem and it worked perfectly.To make a test, I tried to enable the router remote administration on the port 10001. It didn't work.ps: my wireless router is a dlink di-524, I am writing this in this forum because I couldn't find the one related to my router...
We have four VLANs that need to be accessible to wireless devices. The VLANs serve the following groups: staff, student, guest, phone
We are currently using a WEP/MAC authentication for staff and phone wireless networks.
I am looking for what your recommendation would be to provide reasonable level of wireless security, particularly with the staff network, but at the same time not require a high level of management, ex. managing active and inactive MAC addresses for MAC authentication. We have the following components available - 1240 APS, Windows AD, a 4402 WLC, and 6 campuses, and outdated Cisco ACS.We need to provide connectivity to Cisco wireless phones, laptops, iPads, cell phones.
i need to know that how can i make vlans in Linksys SRW224G4 Layer 2 manageable switch , because i have 100 users network having lots of users using more then 1 ip to connect 4 different servers having different ip class pools, what i need is, i want to use only single ip pool with Class B Address like 172.16.6.0 for all network users which all connect to far end servers through layer 2 Linksys SRW224G4 manageable switch controlling to allow different IP pools ? like 172.16.1.0 / 172.16.55.0 / 172.16.99.0 and 192.168.1.0
WE have to deploy ASA5585 in between User vlans & server vlans. we have to find all the ports that needs to be opened on firewall. any tools to do same.
I am currently finalising my project in Uni and in the project planning section is asks if there are any ethical considerations to be made in my project. I am conducting penetration testing on a VIRTUAL network simulator (GNS3) using Metasploit toolkit. I am guessing I will need permission to download these tools onto the university network, would that count as an ethical consideration? If not, what would I say in this section? note, all of the data I am using in the project was created by myself, and there is no other human participation.
I want to create a network with a bunch of routers and switches to be used as a test network for company employees to remotely login and learn networking.I don't want this network to interfere with the rest of the network in any way.I am basically trying to create a stub network or a passive network!!
I have a small business environment that uses a domain controller and supports about 50+ PCs. Starting this morning multiple computers have lost their ability to obtain an IP address. We have rebooted our domain controller and tried various fixes on local machines with no luck.
I have a peachtree application installed on a standalone system and needs three other systems to connect to the shared folder to work but each time I click on show workgroup computers, it shows me a blank page on one and only shows the other system on the other.Hence when i try to connect to the peachtree folder, it give error that the system is not accessible?
Currently I'm with a pure Cisco shop, running every LAN Switched infrastructure (even in the HQ datacenter) with PVST+, I'm noticing in the documentation I've read and labs I've created that RSTP is... great, and I've observed that even the uplinkfast functionality seems to be build in by just enabling rapid-pvst. Of course I'll propose a migration plan, document the network, diagram it entirely and provide effective steps to implement the change, but that's assumed from any get'go.
I'm trying to use RDC to connect to my home PC from work. I've tested everything on my laptop from another network and the connection works fine but the same settings don't seem to work when I'm at work.
I'm pretty sure I have everything set up correctly. Using the default port forwarded to the desired computer.
I got a $7 per month plan on a server and I have a problems with FTP connection. I am trying to upload a 20MB file with multiple folders and files in it and the connection is very choppy and I literally was not able to do that since yesterday.
i am using L3MPLS VPN services from a provider.They are doing QOS, like my Voice, Data, ICMP. all traffic is classified in their network and take different paths.Now sometime when we face voice issues, simple ICMP ping , TCP ping, will not give me insight if there are any packet losses, since Voice packets are taking someother path with in MPLS cloud due to DSCP marking of Voice pack to 46.is there any tool in which i can change DSCP value of my packets and test out network response? or any monitoring tool that can do this by default?i am looking for freeware at the moment or trial
question 1. in the typical active directory environment and doing wireless/wired 802.1x authentication on endpoints, should ACS join as a domain computer?
question 2. for the endpoint (domain computer) join the domain, in this case is the endpoint will trust the ACS ( also domain computer) ?
question 3. what if there's a GPO policy to install the rootCA certificate toward the endpoints. In this case, ACS should issue the CSR and let the domain CA to signed as the identity certificate? Am i correct?
I'm having some serious sound problem with some 2950 Cisco switches that I have in my CCNA lab these switches sound like a jet I've gone in and made sure the fans are clean and I even replaced one they still are too loud. So I have a few options I can run them without a fan which I really don't want to do but I want to look at two other options. The first option would be to put a heat sink on the chip that's producing heat I also thought about cutting a whole in the top and mounting a 120mm fan.
I am using the "File exist"-check in my Dynamic Access Policies to be sure that VPN-computers are corporate. I would like to place the file in each users %APPDATA%-directory, but it seem that the ASA cannot use variables when specifying the path? Is there a way to do this or do I have to use a absolute path in the check?I am running a ASA 5520 with sw 8.4(1).
Im trying to give internet from my pc to my router. My PC has 2 NICs one receives the INTERNET CONNECTION and the Other Connects to the Router.The router is W31R+, the OS is Windows XP SP3.
My host has an IP of 20.168.1.2 from a router DHCP. I have a virtual environment which has a DC and DNS and the IP is: 192.168.1.x how can I get access from my host to the virtual environment? What do I need to setup on the host OS? (Windows)
i have recently added to a domain. The initial setup is a server running windows 2003 and several xp machines which logon to the domain using mandatory profiles. However, after adding windows 7 machines and logging them on to the system it doesnt load the profiles. (which is fine as I understand you cannot use the same profiles with windows 7+xp)The problem is it automatically creates a roaming profile when logging off and saves it back to the same path as the other profiles under user.V2 which is growing considerably and causing huge logoff and logon times.How can I get the windows 7 machines to not attempt roaming profiles back to the server and instead to just save the profiles locally when logging off.
Today, we have a server running SNA that connects to router via the following. Vitrual Server --> Nexus 1000v ---->Nexus 7010 ---->2800 series router.We are trying to move server to new environment where it is Virtual Server ----> Nexus 1000v ----- Fabric Interconnect-----Nexus 55xx-----Nexus 7010-----2800 router.
Need securing a wireless environment in a hotel? The SSID has to be broadcast of course but how can we protect guests from man in the middle attacks, etc.? Currently the environment is all AP1200s with no hardware upgrades in the near future. There is also a 2811 router in place but nothing else. We would love to be able to force users to authenticate with a password in order to get out to the Internet as well.
I was asked to mount ACESMs on each of the CAT6K switches of a VSS cluster (one ACESM on each individual switch).On a non-VSS environment, the "svclc module <slot> vlan-group <group>" command is used to bind the VLAN group to the module on a certain slot. But now I am facing a VSS scenario, I will need to combine switch and slot in order to reference each of the individual modules...
How do I "index" each of the ACESMs in a VSS cluster? ¿Is there an extension of the aforementioned command to be able to combine switch and slot information?
I am looking to slowly migrate some of our wireless devices (Aironet 1231 and 1232's) to the Wireless N spec - 1260's.I currently have four AP locations that I want to upgrade first before anywhere else. At the minute, these four AP's work on the 2.4Ghz G band.
how the new 1260's will work in the mixed environment. I believe I will need to purchase the 1262 (which is the dual band version) so that I can operate the AP in both the 2.4Ghz G band range and the 5Ghz N range at the same time, is this correct?If I was to purchase the 1261 (which is the single band version), will I only be able to operate in either th 2.4Ghz or 5Ghz, but not at the same time?
For the mixed environment, would you suggest the dual band version? Can I place the same SSID on multiple Radios if this is the case? Following example: Say I have the SSID called 'Company' - this at the minute is operating on the G band 2.4Ghz range. If I was to purcahse the dual band 1262, could I put this SSID on both the G radio and the N radio? Would clients with an N adapter automatically connect to the 5Ghz range (N Radio) and legacy G and B adapters automatically connect to the 2.4Ghz (G Radio)?
During BOYD implementation we faced some problems with Android devices:
1) The Netwrok Setup Assistant (NSA) download process corrupts during the self-provisioning process (captured on 4.1.1 and 4.2.2 version) 2) If NSA is already installed, the network setup process (downloading profile, certificate) stops at last step: connecting to network, meanwhile the connection itself successfully establishes. This bug is captured on 4.2.2 version, 4.1.1 is ok.
Google ACL is configured according to TrustSec docs and permits all traffic to google networks 173.194.0.0/16 and 74.125.0.0/16.
What I'm trying to go for is to make a Static IP so that I can forward my ports in order to play certain games. I have had my ports forwarded at one time with a different ISP (in the same area), however they used cable and the company I'm with now uses DSL. The company "Hawaiian Telcom" has provided me with a Motorola 2210 modem/router. I have had trouble trying to create a static IP with this router so (sorry if this was a stupid move) I decided to buy a linksys router to try to port forward with that. When my ports were forwarded with the previous ISP I was using a linksys router then. The now aged linksys router was replaced due to it getting wet, but that's besides the point
