Cannot Get Connected To 192.168.0.1
Jul 14, 2012I can not connect to the wireless
View 1 RepliesI can not connect to the wireless
View 1 RepliesI need to have some (maybe four) virtual network interfaces, one face of them connected to my laptop and another face bridged to one of my physical network interfaces.How can i do that?Ive tried VirtNet and Microsoft Loopback Adapter but no success.
View 1 Replies View RelatedI'm currently running the internet through my main PC to other devices in the household by using ICS.
One thing I've noticed is that I can't simply fill in the IP address of the PC hooked up through the router I'm running the ICS through, and connect via FTP (Filezilla). In order to FTP between two local devices, I have to disable the ICS, switch the ICS hosting PC's ethernet plug from the "Internet" port to the "LAN" port, and maybe reboot the router. after doing all of this, I can then FTP connect to another PC for instance.
Is it possible to have an ICS setup between two PCs, and still have the ability to FTP between them as well?
We create a LAN with D Link switch(8 port).6 pc working properly and 1 pc even not connected to LAN we check wire,the signal are transmitted properly through wire.Crimping is done properly.
View 1 Replies View RelatedI moved into the new house with two laptops with Windows Vista installed. Since then I have been experiencing severe problems with the wireless connection. The operator is TalkTalk.
As soon as we realised that the problem seemed to exist exclusively on our Vistas (since the two Macs, of another couple of tenants who had been living here for long, were working correctly as usual) we called the company. They suggested many things I have already read on this forum such as deleting the other networks, re-adding mine manually etc. We then realised that things were more complicated than initially thought and started analysing the problem more in depth. We went through their website and changed different settings, including those listed in the properties of "Manage wireless connection" or sth like that (we changed some IP configurations, the protocol ivp4/6, etc.). The outcome was that my Vistas started working while the Macs stopped.
I called them again many other times but no conclusive solution was ever found. I eventually talked to another operator who drew the conclusion according to which the WEP configuration of our Vistas is not compatible with that of the MAC. In other words either the Vistas would work or the Macs. No way they could both work at the same time!!!!
I ran into a bit of an issue today while testing a vpn software on a virtual machine(win7); I successfully connected to vpn, then the connection dropped and since with the vpn connection another ip address was assigned, now I'm unable to communicate with that VM.
I am able to find it in SCCM via hostname, but can't reboot it or start anything on it.
I've had this problem with my parents internet for some time now, but it's getting gradually worse. It goes through stages of being connected to the internet but won't load web pages. The error messages are;
On Firefox: "The connection to the server was reset while the page was loading"
On Chrome: "The connection to www.example.co.uk was interrupted"
But my computer still says it is connected, and indeed some downloading still works even though web pages won't load (i was able to download the 'Settlers 7' demo from bittorrent and the full game from steam uninterrupted)
ISP is Post Office Connection is DSL Up to 3 computers share this connection, 2 connected by wireless and 1 by LAN. I used to believe this problem affected all 3 computers simultaneously, but now I�m not sure
==============================================================================
C:UsersHal>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Hal-PC
Primary Dns Suffix . . . . . . . :
[Code].....
About a week ago I went on my computer and opened up Mozilla Firefox and it tried loading for a couple of seconds then it went to a white screen. I opened up internet explorer and it says can't find page. I have the pc hardwired with an Ethernet cable to my router. The computer says it is connected and has strong strength. Every other device connected to that router has internet and connects just fine. My antivirus popped up and said it detected a threat then I ran a virus scan and it found nothing
View 4 Replies View RelatedI tried to connect to the internet using my laptop with a four-port ADSL 2+ Wireless Router but I can only connect to LAN, no internet.
I tried to connect using a netbook and it worked perfectly.
I bought my son a PS3 for Christmas and we had one laptop at the time and we had them both connected wirelessly to the internet and they both worked fine. We recently purchased another laptop and when we connected it to the network, now the PS3 will not stay connected to the internet. It is says that the connection is good when you test it, but when you try to download the updates, it stops and says there is an error.
View 3 Replies View RelatedI am trying to connect my laptop to a wireless router at my home, however, it shows limited access and when i browse the internet, i can't surf through the net. I have typed in my SSID and key correctly.
View 2 Replies View RelatedI use Comcast cable as my ISP. My cable modem is located downstairs in my house. The cable modem has an Ethernet cable connected to port in a wall right next to it. In another room in my house I have an Ethernet port in the wall that goes to my wireless router. Connected to my WNDR3700v3 is a Synology DS213. When I am on my wireless network my computer can see it. When I use a Ethernet port in another area of my house I cannot see it.There is a network switch that is located elsewhere in the house. A cable modem connects to that network switch. A Ethernet cable comes out of the switch to a port that then connects to the other ports in the house.When I am connected via the wireless network my router IP address is the same as when I am connected via a wire.What can I do so that when I am either on my wireless or wired network I can see the DS213?
View 2 Replies View RelatedDSL internet connection - linksys wireless router E1550
When connected to work VPN (using Cisco AnyConnect client - split tunneling), I lose internet DNS, cannot resolve by name, but can by IP. Can disconnect from VPN, internet works fine. Can disconnect from linksys router and connect directly to DSL modem, VPN and internet work fine. How do I correct this on the router?
I accendentally turn off the p.c. Without properly shutting it down... When I turn on the computer again, there is no more internet connection... I clicked the network icon on the siede to find out why... It is stated: Not connected; No connections are available... I clicked the "Troubleshoot" link, and accdg. To it: the local area connection is experiencing driver or hardware related problems... I clicked next and it says the wireless network adapter is experiencing problem... We are using wi-fi in our home..
View 3 Replies View RelatedSince my brother doesn't want me to download things from his network, I have to use some other guys network. The problem is not to connect, but it's to browse the internet. I do not know why this happens, but it does. The network is unsafe if that
View 1 Replies View RelatedMy PC is connected with an ethernet cable into a wireless router, and windows says I am connected with internet access, but I cannot load any pages.
View 9 Replies View RelatedMine is connected to the router that is in my room, my big brothers pc cannot get a stable connection, when i access the Network and Sharing center, it says Local only and then when i try to repair it goes to local and internet access but then when the troubleshooter finishes it goes back to local only!?
View 1 Replies View RelatedI used the VPN wizard and can connect, but I cannot see any servers. I clicked incorrectly in another post marking it as "Correct Answer", so know I have to post again as his answer pertains to Windows 98.
Pix 501 ver 6.3.5
PDM 3
wireless connected but no internet access on pc.. Netbook using same router worksUsing Micronet adapter for wifi access on pc and built-in wifi on netbook. Have looked at a lot of comments with similar problem.
View 1 Replies View RelatedThe issue i was having is when i connect to 192.168.50.* network i cannot seem to ping or connect to 192.168.51.2 (esxi host1) and 192.168.51.3 (esxi host2) and also free nas device i.e 192.168.52.2. i can only connect to these devices if i ping the 192. 168.50.1 from both the esxi hosts and also from free nas. Everything starts working if i ping from the esxihosts & Freenas device to 192.168.50.1.
f i connect to the hp procurve switch i can ping the hosts fine from the switch not when i connect to Draytek Router i.e 192.168.50.1 unless i run a ping from esxi hosts and free nas device then everything starts working.Here is my network setup for my ESXI home lab.
I have Draytek Vigor 2800 Router with ipaddress 192.168.50.1 (This Router is Downstairs and connected to DSL Line) and another Router with Firmware flushed with DD-WRT and IP address for this is 192.168.50.2. (this router is in upstairs labroom and is connected in Wireless Bridge Mode to Draytek Router Downstairs)
There is a HP Pro curve Switch 2610-24 with IPaddress of 192.168.50.3 and has VLAN's configured on this switch.The VLAN's are : VLAN10 is esxi vlan and ipaddress is 192.168.51.1 and vlan20 is storagevlan and ipaddress is 192.168.52.1 and vlan 30 is internet vlan and ipaddress is 192.168.50.3 (Switch Address).Port 24 is untagged to vlan 30 i.e internet vlan and connnected the port to dd-wrt router lan port. I have untagged ports 1 to 5 to vlan10 i.e esxivlan and connected esxi host's 1 & 2 to ports 1 and 2 respectively and connected freenas device i.e storage to port 6 which is untagged to vlan20 i.e storagevlan
IP Routing is enabled on the switch and ip route 0.0.0.0 0.0.0.0 192.168.50.2 and Default gateway on the switch is 192.168.50.1.
On the Draytek router i have configured a static route for 192.168.51.0/24 and Default Gateway is 192.168.50.3 and another static route 192.168.52.0/24 and default Gateway is 192.168.50.3
Actually im having a net problem..I use Windows XP SP3 and my net connection is 2mbps.It gets connected but my browser works very slow and it often shows that 'unable to display page'Iv called the interet provider he says theres nothing wrong.It works only for like 2 mins max.Iv even disabled all the startup programs and removed all the programs which I do not use its still the same.
View 1 Replies View Relatedwhen i brows the internet it says " no data received" and i tried this to every browser i have and still no connection it happened first time hours ago i tried shutting it down and restarting it but its still not working my os is windows 7 home premium. i don't know what i did and my friends don't know how to fix it. we have 3 laptops, 2 other laptops doesnt have a problem.
View 2 Replies View RelatedIll get on my laptop and it will connect for 45min-hour and then it will disconnectEverything says connected on the laptop and the router and modem are connected and working. I have tried restarting my router and modem and even clean installed windows and reinstalled drivers. Nothing seems to work. Im posting from my old laptop and it seems to happen on this computer as well. This has never happened before.
View 9 Replies View RelatedMy computer constantly fluctuates between being connected to the wireless network/internet and "connected with limited access" in which I cannot access the internet. I am then forced to disconnect and reconnect. I then have 1-20 minutes before it drops back to limited connectivity.[CODE]
View 3 Replies View RelatedI can connect to the internet with a cable straight from the modem but cant get online through wifi. Have a strong signal. I have tried all the usual suspect, rebooting, resetting etc 100 times.
View 9 Replies View RelatedI am running windows XP on a computer that I use solely for my business' POS system - therefore not being able to connect to the internet is a problem as I cannot process credit cards. I have checked with the linksys (for router) and internet service provider - everything is working fine as you can see because I am posting from another computer. However the computer that is hardwired to the modem and router cannot access the internet. I get a "connecting" message then a quick "login failure" then a " internet explorer cannot display this page" message
View 1 Replies View Relatedmy computer is running windows xp, even though my computer is connected to the wireless router i can't access the internet.
View 1 Replies View RelatedWe usually connect to a remote server through VPN connection. Nowadays we are unable to browse internet after we estabilish VPN connection. I searched many forums and site and got a temporary solution Go go properties of VPN connection - click on networking tab - properties of IPv4/ IPv6 - go to advanced - in ipsettings tab - uncheck "use default gateway on remote network"
After doing this Im able to browse internet but my concern is the external IP should be of the remote system and not my original IP so that I get access to my remote LAN network.Even I'm able to find a temporary solution for this. After doing this setting we need to connect VPN and disconnect it and go for same setting but you need to check "use default gateway on remote network". Now connect VPN and everything seem to work fine , I'm able browse internet and my IP remains of the remote network and everything is working fine till the VPN connection is disconnected.
my problem is net show its connected but cant open any psge. I have tried somany thinng as bellow.[CODE]
View 5 Replies View RelatedI've got a refurbished lenovo Y470 notebook, just out of the box. I was planning on spending the day configuring it, removing bloatware, ect. but I can't acces the internet. I'm at work, there is a guest wireless network for us, I can connect with my phone so the network is up. I was able to connect normally to my home network last night, not sure why I can't connect here. Running win 7 home premium.
View 13 Replies View RelatedI just set up my new HSI service with comcast. I am using a Motorala 5101 Cable modem. No issues with the ethernet connectivity of course. I set up a wireless network with a Westell router. Just now I found the westell 7501 router I use is meant for DSL service.
However I am able to go as far as connect to the wireless network without a hitch. The only problem is that there is no internet activity happening.
My laptop now is using windows 7 operating system. When i want to use wifi it connected but cannot access the webpage. I am using wifi from my android device. Before this my laptop is working normally. I can access to the webpage like usual. But since three days ago it happen. what is going on with my laptop or my android device. But my android device can access to internet normally.
View 3 Replies View RelatedI have no virus/malware (malwarebites) that i can find. All of the firewall's i know of are off and all antivirus software.I Have a desktop computer with Windows XP Pro. I have Cable internet and I am connected through a modem > router > computer.I will copy & paste (from flash drive) onto here the following commands as i have seen numerous requests for this information on other inquiry's that i have read.
[code]....