Cisco Application :: 474 / 594 - Remotely Start WAAS Appliance?
Mar 10, 2013
We have several 474 and 594 class WAAS appliances in the field. When power is lost to a given location, almost all of the other devices we have at these sites will start themsleves back up upon the restoration of power. Since the 474 and 594 WAAS appliances are basically PC based devices they do not seem to have the ability to start themselves back up when power is restored. What we would like is to have a solution wherein the WAAS device powers up on its own once power is restored much like the routers, switches, servers and PBX devices at the same location.
View 1 Replies
ADVERTISEMENT
Oct 12, 2011
We have an ACE Appliance in a DMZ and the ACE Appliance's Admin Context IP is translated between ACE and ANM. The ANM Server does not get translated. It is just the opposite then in another Community discussion.
Our Problem: When adding the ACE4710 Appliance to the ANM imported Device List, we use the ACE's NATed Admin Context IP. Import works well, but ANM reflects the Admin Context IP with it's real configured IP. Polling the ACE Appliance does not work therefore.
Is there a possibility of telling the ANM, that the ACE has to be polled through a NATed IP? I could not find a field to set a NATed Mgmt IP.
Configured IP on ACE Admin Context: 192.168.0.10
NATed ACE Admin Context IP: 172.16.0.10
Imported ACE with IP 172.16.0.10 into ANM, but ANM polls for Rserver, Vserver, Probes, etc. via 192.168.0.10 - which is not reachable from the ANM.
View 2 Replies
View Related
Nov 9, 2011
if a Cisco router or switch can handle wccp redirection enabled for both waas and some other web content filtering appliance using a different service group?
seems like the priority value would come into play determining which service group gets handled first?
we currently do WCCP for WaaS on our 3945s.
I am going to advocate to my customer that we separate this out for CPU load issues, config complexity issues, IOS issues, etc... but the question is going to come up - "can we do WCCP for different applications on our Catalyst 3750 core switch, or our 3945 WAN routers?"
View 2 Replies
View Related
Feb 11, 2013
Do you know if it is possible in ACE 4710 appliance to configure a SIP TLS ?The SIP probe we have in the configuration guide it is only for clear text. for Lync 2013 we need to establish first a TLS session and then within it, send an SIP request..IS it possible in any version? I tried also to configure a HTTPS probe but it fails as it sends a GET which the Lync SIP server doesn't understand.
View 1 Replies
View Related
Jun 21, 2012
In 2008-2010 timeframe, I used the ace 4710 appliances at one customer and kind of liked them. The deployment was not too SSL intensive and B/W requirements were low, but I configured a few HA pairs and that worked well. The configuration was pretty comparable to other Cisco devices; so easy to learn/pick-up.Fast forward to 2011: stepped into an environment, where customer purchased 3 - ACE 20 modules (before I got here), and had multiple issues with them. I found 4 documented TAC cases, and 1 was still open. I started working from December 2011 on getting Cisco to own-up WRT modules but customer by that time had had enough.
The most serious issue was a random reboot, hang or lockup. I wasn’t here to work with them to verify, but that’s eventually what the deal breaker was. Around the February 2012 timeframe, talking to Cisco SE, he revealed Cisco had an independent lab in Switzerland verify that some hardware component on the device had a terminal defect, in which a bit would flip, and force the device to lock or reboot - subject ot radioactive decay or interference.Cisco and the lab attributed this to improper shielding, coupled with defective material in the electronic component; hence the device was highly susceptible to radiation-type errors. This is the kind of stuff you read in doomsday reports! As a result, Cisco was EOL-ing the ACE-20 module. I am trying to get Cisco to replace the ACE-20 modules with something else, but they haven’t been too cooperative. They have also limited their SE/Salseperson presence where I work (Pacific Northwest); and are not too responsive.
I have gotten a verbal agreement to get a credit on prior purchases for the amount this customer spent on the ACE-20 modules. However, the credit is only a few points off their normal discounting model. And Cisco will not go into loss on new product sales. Using example, $100 product would cost me $55 with standard Cisco discounting. Cisco’s cost might be $45 so I will only get another $10 credit on this new purchase.The 3 Cisco ACE-20’s originally cost customer about $100K, so to dwindle this credit down, we would need to purchase about $1-$2 million of new hardware - that's a lot of new gear! And I don’t have any real way of knowing that Cisco is applying the credit honestly, and they won’t put anything in writing. This entire issue has really dampened customer’s impression of Cisco. They had smartnet on the ACE-20’s for 2+ years, but then dumped that after losing faith in the product. Now I am trying to resurrect smartnet to see if Cisco will give us an alternate product.
And to cap it all off, the original Cisco salesperson (who sold customer the ACE’s), has left and went to work for F5! And yes, he has been calling on customer to try to sell some big-IP's! At least there is some humor in all of this. So... Has anyone else had bad experience with ACE-20 module? How about ACE 4710? How to get a reliable working ACE module from Cisco?
View 6 Replies
View Related
Jun 15, 2012
We have an ANM Virtual Appliance, version 5.2, were we login and can go no further. This was working for fine for approximately two and half weeks. We created a backup and re-loaded the system via CLI with the same result. We logged in again via SSH and we have noted the following:
cscoanmsa/admin# sh disk
temp. space 4% used (141244 of 4951688)
disk: 7% used (353916 of 5935604)
Internal filesystems:
warning - /var is 100% used (89219000 of 89258112)
cscoanmsa/admin# sh application status ANM
[code]....
Is there any way to access and clean out the /var directory from the CLI. is this achieved simply via the "delete" command with the full path ?
View 5 Replies
View Related
May 26, 2011
My TCOM guys say they do not see the ACE as a CDP neighbor on their switches. Is CDP enabled by default? I cannot find any documentation that suggests this is configuration (like on the Cisco CSS - where it can be enabled, but cannot see its' CDP neighbors).
BTW - The ACE 4710 Appliance documentation uses CDP as acronym for Certificate Revocation List Discovery Point (for SSL CRL's).
View 2 Replies
View Related
Sep 18, 2011
The upgrade process for ANM virtual appliance 4.2 involves doing a backup and restore as root user. I have looked through the documentation and have even reinstalled the virtual appliance to see if the install script gives away the root password for the OS but without luck.
How to set/find the root password?
View 2 Replies
View Related
Jan 21, 2013
I have a pair of ACE 4710's that I am deploying within a datacenter. The primary and secondary ACE appliances have identical configurations except for the IP addressing and priorities for FT. The FT peer is going into a TL error state.
On the primary ACE appliance, I am able to ping and telnet from/to it without any issues. All of the routing works as it should and everything is seen in the ARP table as it should. The secondary appliance is able to ping everywhere, but telnet out of or into that appliance does not work.
I am able to see the IP addresses in the arp table and can successfully ping end to end from the secondary device, just unable to telnet into or out of it. When I try to telnet out of the secondary device, it reports that there is no route, even though the IP's I am trying to telnet to are directly connected and those interfaces are up and working (otherwise ping would fail). The exact same filters (access-lists, service-policies) are configured in the exact same format and applied to the exact same interfaces.
I tried removing all of the fault tolerance configurations and just created a Layer 3 vlan interface for management and I am still unable to telnet into or out of the appliance. This is not a complicated setup and I have to think there is something obvious that I'm missing, but I'm hung up on the fact that the config's are almost identical while one works exactly as intended and the other reports no route to host for a directly connected interface.
View 2 Replies
View Related
Apr 28, 2012
Although, ACS states its installed, after going through the startup. However when I do show application nothing comes up. When I do a application start acs, %Application failed to start.
View 7 Replies
View Related
Sep 6, 2011
I've got basic connectivty to our ACE30 module and when I try connecting to the management IP address (attached to the Admin context), I see a very basic GUI which only lists the CSM to ACE config conversion tool. I don't see a GUI as detailed in the document: url...How do I get the ACE Applicance Device Manager GUI working so that I can then configure real servers, serverfarms etc rather than via the GUI?Having read through copious amount of documentation I can't seem to find a refrence that would ne useful here. This should be a fairly straight forward exercise - do I need to install some other software to get the full fledged GUI working?
View 2 Replies
View Related
Mar 19, 2012
what is that mean-"Redundancy is not supported between an ACE module and an ACE appliance operating as peers" I'm designing network in which I plan to use ACE-4710-0.5F-K9 appliances.
View 1 Replies
View Related
Feb 5, 2012
disable telnet for ACS 1120 Appliance version 5.0.0.21 .is there anway to do it , not able to login via telnet and ssh it says wrong credentials but webgui is working fine with same user and password.
View 1 Replies
View Related
Sep 25, 2011
i have a 4710 appliance (one armed) and i am load balancing with two webservers. In the URL, there are links that need to be redirected to https:
[URL]
i am using the
rserver redirect REDIRECT-TO-HTTPS[URL]
The https is working but i have a problem. when i access the Main link "first" it is redirected to https to the Main link.But if i access one of the Sublinks directly(without having to click on the main link first) the page is redirected to https but to the Main Link. i have to click the Sublink again in order to get the page.How can i redirect to https and stay on the same page? What might be the general link in the webserver-redirection?
View 4 Replies
View Related
Jan 9, 2013
I would just like to double-check a point with the forum on licensing on 4710 Appliance.If with version 4.2 and above 2Gbps Bandwidth licence is required, the output of the sho license status should be?
View 1 Replies
View Related
Sep 25, 2012
When I add this as a device in Prime, it seems to handle this as some sort of generic device, at least it doesn't know that it's a WAAS.
This is what Prime shows when I've added WAAS to the device list:
No Device Info for the selected device IP Address10.y.x.7Product FamilyOwning Entity ID16249245_10.y.x.7NE ID16250325
View 0 Replies
View Related
Dec 3, 2012
Everytime I make a config change to one of the contexts on our ACE20, I get this message: Config Application in Progress. This command is queued to the system
If I run show download info, I get:
context : context1
Interface Download-status
--------------------------------------------------------------
187 In Progress
199 Pending
Regex download optimization status : Couldn't get status[TNRPC Timed out]
It eventually seems to complete, but it takes a very, very long time. We are running Version A2(3.5) [build 3.0(0)A2(3.5)].
View 2 Replies
View Related
Mar 27, 2013
Report run via Individual Web server URL’sThe report takes less than 20 minutes (average 15 minutes) to fetch and return the data. This is observed 9 out of 10 times.Report run via ACE Load Balanced URLThe report keeps on running for more than 20 minutes and never completes. The front end keeps showing report is running.The data in general when tested directly by running queries against the database (bypassing the platform) completes in 15-18 minutesThe network connectivity for each and every ports involved (Loadbalancer/Servers) have been throulgly checked.
View 6 Replies
View Related
Apr 9, 2011
Act I m working in a telecomm company. Where some telecomm monitoring software running on WAN fixed IP. Now i want to remotely use that PC with another PC having normal another internet connection. Is it possible? My one friend tried it using TEAM VIEWER by setting proxy address in team viewer but that proxy address is not working now.
View 1 Replies
View Related
Jan 22, 2013
I got a bit of a technical problem with my DVR networking.
Devices used:
Telstra USB 4g Sierra 320U Aircard
Netcomm NB16WV - ADSL2+ Wireless N Modem Router with VoIP
TECHview 4 Channel H.264 Camera Kit Model No QV -3032
The Goal:We're trying to view the DVR over the wireless 4g network. We have the 320U Aircard connected to the Router and we're able to access the internet. We have DDNS set up in the router for the host name [URL]. I have gone into the Router with the IP address "192.168.1.1" and configured the device, we forwarded ports 80, 9000 and 18004 to the IP address of the DVR "192.168.1.103" And we also added our dynDNS details in the router. I set the the DVR with a static IP address to "192.168.1.103" and rebooted everything. I was then able to access the DVR via a Local Connection. But when I tried to access the DVR via "Redxdvr.dyndns.org" It would not connect.
View 1 Replies
View Related
Jan 30, 2012
Is it possible to log onto a router over the internet using a pooled IP address? I want to be able to manage some routers that are in different sites, these are just providing internet access to clients. these are 1801 and 877s
View 4 Replies
View Related
Jun 6, 2011
have hp omni 100 with winows 7 home premium and built in webcam,wanted to be able to either turn it on when i leave home or better yet turn it on from work and be able to monitor my residence dont have alot of money to spend on it
View 1 Replies
View Related
Feb 12, 2012
I do not want to connect remotely to a desktop (thats where all of my research keeps directing me to). I just want a device to be part of a network, without actually being there. Is this possible?For some context, heres what I am trying to do: I have a microchip (Arduino) which is connected to a laptop, which is not in range of the wireless network, but its connected to a 4g mobile network. There is an iPhone app called TouchOSC which can communicate wirelessly with this microchip, but only if it is connected to the same wireless network.
View 3 Replies
View Related
Aug 25, 2012
how to actually run a .bat on a remote computer through ssh/sftp in a GUI. My problem is that I havent been using command lines for 15 years, I litterally have never used a command line besides using stuff like ipconfig in command prompt.I have a ssh server on my home server using FreeSSH'd and The only ssh program i can find with a gui is winscp. Though theres no option to connect through ssh everyone says it does and theres even options for it.
Though when i try to run the bat file i get this error"Current sftp -3 session does not support command you request" then something about a seperate shell session. if i click ok it goes down to starting the session then just sits there and says host is not communication for more than 15 seconds still waiting and only option is to abort.
View 1 Replies
View Related
Sep 19, 2011
I've just setup my router and dvr system. I have my DVR wired to a Linksys E1200 router. At home view by using url....it then prompts me to log in and voila I can view. I tried setting up the port forwarding although I'm not sure if I did it correctly or not. I got onto my routers webpage. Went to "applications & gaming" Named port, selected both, put in DVR's ip address and clicked save. Came to work and tried to view it and I just get the "cannot load webpage" page.
View 18 Replies
View Related
Sep 25, 2011
How does one remotely access a SG300-28P?
View 2 Replies
View Related
Sep 13, 2012
We recently received a couple of new 5508 WLC running 7.2.103 but the FUS is running 6.0.182. Is it possible to upgrade the FUS to 7.0.0 remotely? Looking at the FUS release notes, user intervention is no longer required, Is this possible?
View 10 Replies
View Related
Jul 27, 2011
I work for a company that has several offices in various parts of the country, my job is to change the name of all the machines on our network to our new naming convention. I need to perform this task without causing a distrubance to the other users.
View 2 Replies
View Related
Apr 17, 2011
How can I do this since my netbook has no CDROM drive?
View 2 Replies
View Related
Mar 13, 2012
Basically just need to get a static IP so i can remotly view my DVR cameras.
View 4 Replies
View Related
Jun 26, 2011
Basically I set up a CCTV at my shop and I can access it remotely through LAN only (an IP was supplied so I can watch it on a pc), but my problem is I don't want to watch it on the LAN pc as it is at the shop so that is useless but I want to be able to watch it at home is there anyway. Is there any way I can assess that LAN IP online at my house maybe a VPN?
View 7 Replies
View Related
Aug 14, 2012
I'm currently looking for a way to change all of our Laptop & Workstation (Approx 250+ machines) BIOS passwords using a remote tool if possible. The majority of laptops are Latitude and the workstations OptiPlex although most of the laptops have BitLocker activated. We also use Empirum software to push out software.
I have been looking around and into using the Dell Client Configuration Utility and also the OpenManage tool although I'm not too sure if they would work for us due to us using BitLocker.
View 1 Replies
View Related
Jan 26, 2011
I have an ISIS TFS1612 security camera system at my business. I'm looking to view it remotely. But, I can't seem to get it working. I have forwarded all ports that it uses. As well as set up a static external ip address. The modem I have is an Actiontec Q1000 which also acts like my router. There are other things connected to the modem.
View 5 Replies
View Related
