Act I m working in a telecomm company. Where some telecomm monitoring software running on WAN fixed IP. Now i want to remotely use that PC with another PC having normal another internet connection. Is it possible? My one friend tried it using TEAM VIEWER by setting proxy address in team viewer but that proxy address is not working now.
View 1 Replieshow can we login into the private network from Remotely in Switches and firewall or Routers,
View 5 Replies View RelatedI have a website account with fatcow. I created the website with Dreamweaver software and uploaded it to fatcow via port 21.My internet connection was via xplornet and I had no access problems. I upgraded to xplornet's new g4 system and now I can no longer access my account online or upload to my website.We have two computers. The first is a desktop system that has the dreamweaver software. The second is a laptop which connects wirelessly. We share the signal through a dlink router. The modem is a viasat Surfbeam 2 residential satellite modem.1. When I attempt to login to the fatcow control panel, the tab shows successfully authenticated and then re-directs me back to the login page. This happens on both the laptop and the desktop.
I have tried bypassing the router and the problem still exists.I took the laptop to the computer center and I can login to the account no problem.I used a free proxy server page on the internet and can login from my home system on my desktop no problem.I have completely turned off virus scan and firewalls. It doesn't work. I have tried IE7, Chrome, Firefox and they all have the same problem. The laptop runs IE8 and has the same problem.I can ping the page successfully. I can traceroute the page successfully. I can't nslooup any site at all. I get the domain not existant message.My ip and dns settings are the automatically find option.I have renewed ips and dumped the dns cache.Using alternate dns addresses doesn't rectify the problem. When I attempt to upload via dreamweaver, I connect but within seconds I get a Dreamweaver message that says "Connection to remote host has been lost. Click refresh to continue" and the log reads "FTP Error. Dreamweaver could not connect to server." I haven't taken my desktop anywhere to try to see if it works on a different network. I'm in a remote location (hence the satellite internet)and it is an hours drive to the nearest private internet connection and a 2 hour drive to the nearest public connection.
We have a Linksys WRT120N wireless router set up at one of our small offices. I noticed recently when trying to log in to the router to make some admin configurations that it will not accept the login credentials when trying to log in from IE10 browser. Works fine from Chrome, IE9, ect. logging in to a linksys router with IE10?
View 3 Replies View RelatedI got a bit of a technical problem with my DVR networking.
Devices used:
Telstra USB 4g Sierra 320U Aircard
Netcomm NB16WV - ADSL2+ Wireless N Modem Router with VoIP
TECHview 4 Channel H.264 Camera Kit Model No QV -3032
The Goal:We're trying to view the DVR over the wireless 4g network. We have the 320U Aircard connected to the Router and we're able to access the internet. We have DDNS set up in the router for the host name [URL]. I have gone into the Router with the IP address "192.168.1.1" and configured the device, we forwarded ports 80, 9000 and 18004 to the IP address of the DVR "192.168.1.103" And we also added our dynDNS details in the router. I set the the DVR with a static IP address to "192.168.1.103" and rebooted everything. I was then able to access the DVR via a Local Connection. But when I tried to access the DVR via "Redxdvr.dyndns.org" It would not connect.
have hp omni 100 with winows 7 home premium and built in webcam,wanted to be able to either turn it on when i leave home or better yet turn it on from work and be able to monitor my residence dont have alot of money to spend on it
View 1 Replies View RelatedI do not want to connect remotely to a desktop (thats where all of my research keeps directing me to). I just want a device to be part of a network, without actually being there. Is this possible?For some context, heres what I am trying to do: I have a microchip (Arduino) which is connected to a laptop, which is not in range of the wireless network, but its connected to a 4g mobile network. There is an iPhone app called TouchOSC which can communicate wirelessly with this microchip, but only if it is connected to the same wireless network.
View 3 Replies View Relatedhow to actually run a .bat on a remote computer through ssh/sftp in a GUI. My problem is that I havent been using command lines for 15 years, I litterally have never used a command line besides using stuff like ipconfig in command prompt.I have a ssh server on my home server using FreeSSH'd and The only ssh program i can find with a gui is winscp. Though theres no option to connect through ssh everyone says it does and theres even options for it.
Though when i try to run the bat file i get this error"Current sftp -3 session does not support command you request" then something about a seperate shell session. if i click ok it goes down to starting the session then just sits there and says host is not communication for more than 15 seconds still waiting and only option is to abort.
I've just setup my router and dvr system. I have my DVR wired to a Linksys E1200 router. At home view by using url....it then prompts me to log in and voila I can view. I tried setting up the port forwarding although I'm not sure if I did it correctly or not. I got onto my routers webpage. Went to "applications & gaming" Named port, selected both, put in DVR's ip address and clicked save. Came to work and tried to view it and I just get the "cannot load webpage" page.
View 18 Replies View RelatedI work for a company that has several offices in various parts of the country, my job is to change the name of all the machines on our network to our new naming convention. I need to perform this task without causing a distrubance to the other users.
View 2 Replies View RelatedHow can I do this since my netbook has no CDROM drive?
View 2 Replies View RelatedBasically just need to get a static IP so i can remotly view my DVR cameras.
View 4 Replies View RelatedBasically I set up a CCTV at my shop and I can access it remotely through LAN only (an IP was supplied so I can watch it on a pc), but my problem is I don't want to watch it on the LAN pc as it is at the shop so that is useless but I want to be able to watch it at home is there anyway. Is there any way I can assess that LAN IP online at my house maybe a VPN?
View 7 Replies View RelatedI'm currently looking for a way to change all of our Laptop & Workstation (Approx 250+ machines) BIOS passwords using a remote tool if possible. The majority of laptops are Latitude and the workstations OptiPlex although most of the laptops have BitLocker activated. We also use Empirum software to push out software.
I have been looking around and into using the Dell Client Configuration Utility and also the OpenManage tool although I'm not too sure if they would work for us due to us using BitLocker.
I have an ISIS TFS1612 security camera system at my business. I'm looking to view it remotely. But, I can't seem to get it working. I have forwarded all ports that it uses. As well as set up a static external ip address. The modem I have is an Actiontec Q1000 which also acts like my router. There are other things connected to the modem.
View 5 Replies View RelatedIs there any way we can assign or access multiple system with 1 public ip to save public ip's.
View 5 Replies View RelatedI want to connect my laptop with another one via remote connection. But I don't know how to connect. I'm having the team viewer software installed in my two laptops. How to get my PC's connected through remote assistance.
View 4 Replies View RelatedIs it possible to log onto a router over the internet using a pooled IP address? I want to be able to manage some routers that are in different sites, these are just providing internet access to clients. these are 1801 and 877s
View 4 Replies View RelatedUsing a netgear router, windows xp and noontec n5 NAS, I can set up the n5 as a local network drive but, from a friend's house, I canot get to access the n5 remotely using urls such as :ftp://nik@<EIP>.com where nik is the N5 ftp folder name set up and <EIP> is the external ip address detected for the router. The n5 is sold without a user guide and their website has so far not allowed me to download one either
View 3 Replies View Relatedthe way i find mac address remotely is by using this methodarp -a ip addressshould give you a mac address of the following ipsunil pindoria
View 2 Replies View Relatedi am trying to access my 02 router to access my cctv but my router will not allow remote access.
View 2 Replies View RelatedI have set up the workgroup and named each other and now i can see the file shared from my XP laptop and Windows 7 and it shows me that communicate with PC is OK.But throught the Remote I typed the computer name as mentioned on Remote and it says This computer cant connect to the Remote Computer.
I just want to remote the computer locally in the same network. when i browse for to remote PC and tried to click workgroup but the error appear as do not contain terimal servers.
I have tried to apply system image(present on local system )to a remote system using file sharing with imagex.exe , but it dint work.
View 2 Replies View RelatedHow to access remotely over the Internet to office PC from my home PC and get files that I need? Office's ADSL modem's model is BeWan iBox V1.0 and it has a built-in firewall. ADSL connection has a dynamic IP, which I assume should be configured as static (but how?) Should I investigate VPN capabilities as well? I'm not very knowledgeable about these things.
View 7 Replies View RelatedI use remote Desktop access alot for work but it seems a waste of power as for it to be effective I need to keep the computer on all the time. I have an old Ipod Touch, First Generation that I never use.. I was wondering if it is possible to connect the Ipod Touch to my desktop computer via USB.. If when I finish work I put the computer in sleep mode and then if there is any way that I could access the IPOD via the wifi (which is always on in the building) and make the ipod send a signal to the computer to boot it back up..
View 1 Replies View RelatedI am living in an apartment complex with free wireless Internet and i turned this old pentium 4 computer into a web/media/file server. I want to be able to access my server away from home but i am extremely limited and i can not forward ports and I have no other kind of network privileges. I am a complete idiot when it comes to networking solutions and I am trying to learn. I have a very vague understanding of vpns and dynamic dns services but i do not understand what i need to access my server from a different network. I setup dns services for my home server but still have not been able to resolve hostnames to actual y point to my server or maybe my networks firewall is blocking me.
View 1 Replies View RelatedThe server is running Microsoft Windows Server 2008 R2.The four other systems connecting to the server are running Microsoft Windows XP.Is it possible to have all four users connected at the same time remotely using a remote desktop client to the server? I'm using Teamviewer right now, but not sure if it will work with that.
View 3 Replies View RelatedIs there a way to reset the camera remotely, via the browser interface or a FTP connection? I can't find a "reset camera" button on the web interface...unless I've overlooked it.
View 3 Replies View RelatedI need to change my DCS-942L camera settings remotely when I am not connected to my home wireless network. When I am at home, I just type in the local IP address of the camera (192.168.0.100) into my browser to access the firmware. How can I do the same when I am away from home and obviously not connected to the local WiFi?
View 1 Replies View RelatedHow does one remotely access a SG300-28P?
View 2 Replies View RelatedWe recently received a couple of new 5508 WLC running 7.2.103 but the FUS is running 6.0.182. Is it possible to upgrade the FUS to 7.0.0 remotely? Looking at the FUS release notes, user intervention is no longer required, Is this possible?
View 10 Replies View RelatedIs there a way to configure the switch remotely if it looses it's management IP.
View 14 Replies View RelatedWe have an Asus RT-N56U router at home, which is connected directly to a cable modem. I am attempting to remotely access the router's interface, and am having trouble doing so even after configuring it properly. I configured the router's firewall to allow remote access, using port 8080. I also set up DDNS, although I tried connecting using both the IP and the DDNS name.I also set the router to respond to pings, and I am able to successfully ping the router (from a remote location) using both the DDNS name and the public IP. But when attempting to connect using my browser, it doesn't work. I have tried multiple browsers, multiple remote locations, and disabling my computer's firewall, all with no success.
View 7 Replies View Related