Cisco Switches :: How Does One Remotely Access A SG300-28P
Sep 25, 2011How does one remotely access a SG300-28P?
View 2 Replies
ADVERTISEMENT
Routers / Switches :: Can't Access 02 Router Remotely
Mar 28, 2013i am trying to access my 02 router to access my cctv but my router will not allow remote access.
View 2 Replies View RelatedRemotely Access 500 Switches Via TELNET And Web Based From Server?
May 15, 2013I want to remotely access Cisco 500 switches via TELNET and WEB BASED from a server. I dont know the ip addresses for Cisco 500 switches which are configured as backbone which the ip address assigned on the network is static ip address. Specifically I want to get their configuations inorder to get their specified assigned vlans on the network. I know the ip addresses for their specified cisco 500 switches' gateways. I know that cisco 500 switches can be accesses through web. Is there other ways to solve the problem apart from going onsite and connect to the cisco 500 switches using network cable since cisco 500 swithes dont have console ports?
View 1 Replies View RelatedCisco Switches :: (S)NTP Synchronization On SG300 Access?
Nov 17, 2011In our network two Domain Controllers are configured as the central (S)NTP Servers. For a switch in Layer 3 mode it is quit easy to synchronise with these (S)NTP Servers. But what is actually the best approach for access switches in layer 2 mode, that are connected to the layer 3 switch? The only IP Address they have are part of the management VLAN ID 1 which is not routable. I am actually looking for something like a broadcast without having to put a NTP Server in management vLAN.
View 4 Replies View RelatedCisco Switches :: SG300 - Can't Able To Access Shared Folders
Jul 9, 2012I supplied 3 numbers of SG300 series switches for the sole reason to have inter-vlan routing. I created 4 VLANs in the switches and made one switch as Layer 3 switch and other 2 as Layer 2 switch. Inter-Vlan routing is working fine. I am able to ping PCs from different VLANs. But I am not to access shared folders. Customer has installed Window 2003 server installed and it is in VLAN 1. There are some folders created in this server and it is very important for users to have access to the folders.Also, I am not able to access shared folders in other VLANs. I have created a case with Cisco small business and I got a reply saying that the switches will not support shared folder feature, which I think is not real. I am getting a very time to implement this solution in the network. I have a Sonicwall firewall after Core switch which is connected to ISP.
ISP<----->Sonicwall FW<----->Core Switch<------>Layer 2 switch<------>Layer 2 switch
Cisco Switches :: SG300 - How To Block Management Access
Mar 25, 2012I have a SG300 switch working in layer 3 mode. I created 3 VLANS and the intervlan communication is working fine. I want to know how to block acces to switch managment from the Vlans. One of the vlan is allowed to access the switch but not the others vlans. What is the best way to implement this? with ACL or with Managment Access Method, creating an access profile?
View 1 Replies View RelatedCisco Switches :: SG300-28P And Aironet Access Points
May 14, 2013Does Cisco SG300-28P provide enough PoE to power access points 1550 and 1600?
View 1 Replies View RelatedCisco Switches :: SG300-10 Access Port Change Blocks Other One
Jan 15, 2013I recently bough for a home lab a sg300-10 switch. I have enabled layer 3 routing on it and have come across a puzzling issue. The switch is the default gw on this network, and in front of the switch there is a cable modem (ip route 0.0.0.0 0.0.0.0 192.168.0.7).
This is my config:
config-file-header
switch5ed948
v1.2.7.76 / R750_NIK_1_2_584_002
[Code].....
Cisco Switches :: SG300 Can't Able To Access Shared Folders From Different VLANs
Jul 9, 2012I supplied 3 numbers of SG300 series switches for the sole reason to have inter-vlan routing. I created 4 VLANs in the switches and made one switch as Layer 3 switch and other 2 as Layer 2 switch. Inter-Vlan routing is working fine. I am able to ping PCs from different VLANs. But I am not to access shared folders. Customer has installed Window 2003 server installed and it is in VLAN 1. There are some folders created in this server and it is very important for users to have access to the folders.Also, I am not able to access shared folders in other VLANs. I have created a case with Cisco small business and I got a reply saying that the switches will not support shared folder feature, which I think is not real. I am getting a very time to implement this solution in the network. I have a Sonicwall firewall after Core switch which is connected to ISP.
View 1 Replies View RelatedCisco Switches :: SG300-28 GUI Different Than Online SG300-48 Simulator
Aug 29, 2011These are our first switches and seems like GUI is lot different than the online. Out intervlan routing is o not working. I am absolutely sure that I setup the switch in L3 mode since it allows me to create mutiple interfaces. I am hoping that this GUI issue is related to interVLAN routing.
Below is the blog I started for InterVlan issue [URL]
This is the link for online simulator and what I see in its IP tab. I know this switch is not SG300. [URL]
This is what I see on our switch.
Our switch version
switchd64684#show version
SW version 1.1.0.73 ( date 19-Jun-2011 time 18:10:49 )
Boot version 1.0.0.4 ( date 08-Apr-2010 time 16:37:57 )
HW version V01
Cisco Switches :: SG300-28P And SG300-52 Web Managing - Fans
May 26, 20111) I have a Cisco SG300-28P. I plan to add a SG300-52. Would it be possible to manage the new switch through the SG300-28P web browser ?
2) There are 2 fans in the POE model SG300-28P. How many fans are they in the non POE switch SG300-52 ?
Cisco Switches :: SG300 - Implement ACL To Permit Or Deny Access Between Vlans And Hosts
Mar 25, 2012I have a SG300 Switche working in layer 3 mode.I configured 3 VLANs on the switch, assigned all ports, given IP addresses to VLANs interfaces, etc.Now I want to implement ACL to permit or deny access between vlans and hosts.Can I apply an ACL to a whole VLAN (in or out) like Catalyst models?I mean apply the ACL to the entire vlan or the only way in this model is to implement that ACL port by port?Every time I have a new port configure to work in a Vlan I have to implement the ACL?
View 4 Replies View RelatedCisco Switches :: SG300-28 Uplink To Another SG300-28?
Feb 8, 2012Can I connect a single Cat5e cable between two SG300-28 and link them? If so what must I configure?
View 1 Replies View RelatedCisco Switches :: Difference Between SG300-28P And SG300-52
Jul 25, 2012I have SG300-28P that I am using as layer-3 switch. Recently I ran in to SG300-52 switch and even though loading same firmware doesn't give me option to do layer-3 switching. For SG-300 I see options in GUI to create vlan interfaces under IP information section, while SG300-52 has IP information option only under the management section.let me know if these are 2 different hardware types and L3 is not possible on SG300-52. If its possible to enable L3 switching on SG300-52?
View 2 Replies View RelatedCisco Switches :: Replacing 3COM 4500 Switches With SG300-52?
Nov 21, 2011I'm replacing 2 3COM 4500 Swithes with the SG300-52 Cisco switch. We have 3 VLANs, 10, 20, 100. The switch is set for Layer 3 and I have setup DHCP relay. what settings i should set on the Cisco for the following setups:
3COM Setup
#
interface GigabitEthernet1/0/1
[Code].....
Cisco Switches :: SG300 Switches Have Poor Performance In Layer 3?
Jan 1, 2013We have several of the SG300 Serices switches. We use them to route VLAN traffic to Remote Offices, Internet Connections, and WiFi Access Points.In one remote office we have a SG300-10 setup to route the HQ Network and the remote Office Subnet. The SG300 is Connected to HQ via Fiber and has multiple Tagged VLANs on it. If I do speed tests over the Fiber Link on the Incoming Tagged Netwotk I get Decent performance, 80Mbs. If I switch to a networtk that is not priginating from HQ, and have the SG300-10 route packet, I get dismal performance. 15-20Mbs.
I Fireded up a New SG300-28P FW v1.2.7.76. Added a the HQ VLAN 101 and new VLAN 1025 . Mapped some Tagged and untagged ports for each. Switch was connected to HQ Network as untagged VLAN 101. I put a laptop on an Untagged VLAN 101 port. Ran some tests, cam back with 750-850Mbs. Great. Put the same laptop on a Tagged 101 Port, Configured the NIC for Tagged VLAN 101, Same test, same Speeds, 750-850Mbs.I then Configured laptop for Tagged VLAN 1025. Connected to tagged VLAN 1025 port. Ran speed tests, resuts were 15-20Mbs!
I then Configured laptop for Untagged VLAN 1025. Connected to unagged VLAN 1025 port. Ran speed tests, resuts were 15-20Mbs!It was only the Laptop and the Connection to the HQ net on the SG300-28P. Why is the performance of this unit soooooo poor when it needs to route?Other Switches have FW v1.0.0.27 or FW v1.1.2.0. They have Similar speed issues. All Configured for Layer 3.
Cisco Switches :: SG300 Switches Can Be Used With Microsoft NLB In Multicast Mode
Dec 18, 2011does the SG300 switches can be used with Microsoft NLB in Multicast mode?I know on traditional Catalyst switches you can statically "map" IP's to mac's and then to multiple ports but this doesn't seem to work correctly on the SG switches - it gives an error about the mac not being not Unicast?
View 2 Replies View RelatedCisco Switches :: VLAN Management Via SNMP On SG300-10 Switches
Aug 7, 2011Any snmpset commands to add, modify and delete vlan table entries on SG300-10 switches? I checked url... however this information is apparently only valid for catalysts. The latest firmware is installed and the provided MIB files are used.
View 8 Replies View RelatedCisco Switches :: Multiple VLANS And SG300-28P Switches Setup?
Aug 20, 2012I'm going to have several SG300-28P switches to setup. I'll need to create multiple vlans for data, voice, and wireless traffic. I have the following questions in setting up this configuration:
VLAN 1 Management
VLAN 100 Data
VLAN 200 Wireless
VLAN 300 Voice
1) For managing the switches via IP, will LAN1 be the default management network? Should I create a seperate VLAN for managing the switches?
2) For uplinking the switches together, I plan to trunk a port to connect the switches together. What's the configuration on the trunk port to forward all vlans from one switch to another?
3) On some ports, I want to configure a trunk for two vlans (Data and Voice) where the phone has a pass through for PC. The phone supports tagging for the PC and the VoIP traffic. For example on port 10, would VLAN 100 and 300 be set to tagged?
Cisco Switches :: SG300-52 Multiple Lags Between Switches?
Jan 19, 2012I'm having alot of trouble trying to connect more that one LAG between two SG300-52 switches.Basically i have configured both switches with the same vlans. For 2 of the vlans i would like to connect them together between the two switches using LAG. Switch1 has Vlan 5 (ports 1-12) & Vlan 10 (Ports 25-36) with LAG configured on ports 1-2 and ports 25-26. I have setup the second switch identical to the first. But when i connect the LAG's there is no connectivty. If i disconnect one LAG the other starts working.Can you only have i interconnect LAG between switches?
View 1 Replies View RelatedCisco Switches :: How To Configure Two Links Between Switches SG300
Apr 22, 2012I have two SG300 serie switches and two Gigabit connection between them. How do I configured these two links to work toghether like a one 2 Gigabit channel?
View 2 Replies View RelatedLogin Into The Private Network From Remotely In Switches?
Mar 21, 2011how can we login into the private network from Remotely in Switches and firewall or Routers,
View 5 Replies View RelatedLinksys Access Point :: Remotely Access A WAP54G?
Feb 15, 2011I would like to ask if its possible to remotely access a WAP54G?
View 3 Replies View RelatedAccess Two Or More System With 1 Public Ip Remotely?
Apr 20, 2012Is there any way we can assign or access multiple system with 1 public ip to save public ip's.
View 5 Replies View RelatedCisco :: Why Can't Remotely Access Topology Services In LMS3.2
Mar 24, 2012I noticed that I cannot remotely check the Topology Services in Ciscoworks LMS 3.2. I have attached a screenshot of the error for reference. When I access Topology Services on the server itself, everything works well.
View 5 Replies View RelatedServers :: Can't Access Noontec Gigalink N5 NAS Remotely?
Jul 1, 2012Using a netgear router, windows xp and noontec n5 NAS, I can set up the n5 as a local network drive but, from a friend's house, I canot get to access the n5 remotely using urls such as :ftp://nik@<EIP>.com where nik is the N5 ftp folder name set up and <EIP> is the external ip address detected for the router. The n5 is sold without a user guide and their website has so far not allowed me to download one either
View 3 Replies View RelatedSharing :: How To Remotely Access Office PC From Home
Feb 10, 2013How to access remotely over the Internet to office PC from my home PC and get files that I need? Office's ADSL modem's model is BeWan iBox V1.0 and it has a built-in firewall. ADSL connection has a dynamic IP, which I assume should be configured as static (but how?) Should I investigate VPN capabilities as well? I'm not very knowledgeable about these things.
View 7 Replies View RelatedRemotely Access Server That Is On A Private Network?
Jan 15, 2013I am living in an apartment complex with free wireless Internet and i turned this old pentium 4 computer into a web/media/file server. I want to be able to access my server away from home but i am extremely limited and i can not forward ports and I have no other kind of network privileges. I am a complete idiot when it comes to networking solutions and I am trying to learn. I have a very vague understanding of vpns and dynamic dns services but i do not understand what i need to access my server from a different network. I setup dns services for my home server but still have not been able to resolve hostnames to actual y point to my server or maybe my networks firewall is blocking me.
View 1 Replies View RelatedCisco Switches :: VTP And STP On SG300-28 Switch
May 9, 2011I have a question, does the SG300-28 support VTP and STP?. I want to add it to my network's VTP domain so I don't have to manage vlans manually on the SG300-28 and also be able to configure STP to keep my network loop free.
View 2 Replies View RelatedCisco Switches :: Set Up LAG Between SG300-20 And SRW224G4P
Jul 19, 2012On my SG300 I set up LAG for the last two ports.
I then plugged them into my SRW224G4P, once I do that I get dropped packets.
I was thinking maybe doing firmware upgrades to both switches?
Cisco Switches :: How To Assign SG300-10 To VTP
Jan 29, 2012I need to know how to configure each port in switch SG300-10 to vlans, i need to configure one port "trunk" with catalyst switch and assign 4 ports to different vlans. any solution?
View 2 Replies View RelatedCisco Switches :: Does SG300-10 Support RIP
Jun 20, 2012In the CLI documentation for the SG 300 Series, it shows sh ip route rip as a command. I have installed the latest firmware and that command is no longer available. Does the SG300 series support RIP?
View 6 Replies View RelatedCisco Switches :: SG300-10MP Keeps Going Down?
Jan 27, 2013We purchased a SG300-52 last week to replace a 5yr old Dlink which has worked perfectly. 1 day after the SG300 went it it started crashing with this fatal error problem so I reverted the firmware back from 1.2.7.76 (latest) to 1.1.2.0 but I still get the problems. It crashes when I have it on my lan with users connected or if I just have the switch on my desk with just my laptop connected, so it cant be a load issue or a network topology issue. I already have a Cisco SGE2010 on my network without problems.
View 7 Replies View Related
