Remotely Access 500 Switches Via TELNET And Web Based From Server?
May 15, 2013
I want to remotely access Cisco 500 switches via TELNET and WEB BASED from a server. I dont know the ip addresses for Cisco 500 switches which are configured as backbone which the ip address assigned on the network is static ip address. Specifically I want to get their configuations inorder to get their specified assigned vlans on the network. I know the ip addresses for their specified cisco 500 switches' gateways. I know that cisco 500 switches can be accesses through web. Is there other ways to solve the problem apart from going onsite and connect to the cisco 500 switches using network cable since cisco 500 swithes dont have console ports?
I am living in an apartment complex with free wireless Internet and i turned this old pentium 4 computer into a web/media/file server. I want to be able to access my server away from home but i am extremely limited and i can not forward ports and I have no other kind of network privileges. I am a complete idiot when it comes to networking solutions and I am trying to learn. I have a very vague understanding of vpns and dynamic dns services but i do not understand what i need to access my server from a different network. I setup dns services for my home server but still have not been able to resolve hostnames to actual y point to my server or maybe my networks firewall is blocking me.
Here's what I need to do. I have a file server at work that I need to be able to allow our employees to access the files when they are traveling. I know the server's ip address and know how to port forward and how to share certain folders thru windows, but this is all new territory for me.
I have verizon wireless router to connect to the internet via FIOS. The public IP on the wireless router is DHCP assigned. I have my home lab with cisco 2511 and octal cables. I would like to be able to access the terminal server remotely via the internet when I'm not in. I'm concerned cause the wireless router is DHCP assigned IP. Even if I have a static IP on the ethernet port of the 2511 connected to the wireless router, I'm not sure if the NAT will work so it can be accessible from the internet.
We've got a SG200-18 switch that is to be used as a workgroup switch in our environment (SW Version 1.1.1.8). Working with CLI on big and mid-range Cisco-gear over the past two decades I'm having a hard time figuring out the following on the SG200:
o) I want to change the Management-VLAN from the default "1" to the management-VLAN used in our environment. Sure enough I created that vlan in the SG200-config, however when it comes to assigning the management-IP and VLAN for the management interface in the corresponding pulldown under "IPv4 interface -> Management VLAN" the only thing selectable is the default "1". (see screenshots enclosed)So how do I set a management VLAN different from 1?
o) How do I enable telnet/ssh-access to the SG200-18 - I'd be far more comfortable with a CLI-environment?
The server is running Microsoft Windows Server 2008 R2.The four other systems connecting to the server are running Microsoft Windows XP.Is it possible to have all four users connected at the same time remotely using a remote desktop client to the server? I'm using Teamviewer right now, but not sure if it will work with that.
I can telnet to switch from checkpoint firewall access port and from switch directly. I can ping/traceroute successfully to the switch. Access-lists 14 & 15 are allowing the traffic I want. The router on the other side of the FW has 2 static routes and a default static route set up.
Here is some of the config from my switch:service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
aaa authentication login default local enable line none[code].....
Not sure of checkpoint firewall config....I have run wireshark when trying to telnet and I get no syn-ack back from remote switch. Just 3 consecutive syn attempts.I have some switches I can connect to and they go right through the 3 way TCP handshake and I cannot find any differences in the configs between the successful connections and the unsuccessful connections.
I have more than 20 SF 300-24P 10/100 Managed Switch switches deployed and running in my office network. All these switches have web configuration utility enabled. We would like to enable telnet too. But for this I know I have to visit site to site, connect the switch manually with a laptop and enable telnet option. I am looking for how can I enable telnet in these switches using web-based switch configuration utility.
I'm doing some tesing in SFE2000P linksys switch about the TACACS authentication. I have configured the switch accodringly to point my ACS server with key string. Now, I'm able to login into the switch with TACACS account in HTTP/HTTPS only and but, not with the TELNET access.
Still Switch is authenticating with the local user account only, when in TELNET access method.
I have an SG300 authenticating telnet login to a RADIUS server. It allows me to log in at Priv level 1. when I try and enter Priv 15 mode, I'm prompted for a password which I don't appear to be able to set anywhere or know.
If I remove RADIUS and go back to Local authentication, telnet logs me in at Priv15 immediately.
I HAD similair problem:[URL](Have ver 1.1) Forgot password. Restored to v1.0.0.86 via telnet Been playing around with telnet AND web based updates Read somewhere else (Web-based ONLY works with IE) (Tried Web-based and keep getting "Copy Failed/Undefined Error" and 0 Bytes transfered) Know to upgrade "Boot" first, then "Software Image" THEN reboot
Tried telnet (not through web-based startup) Can get to "lcli" (by Ctrl+Z twice)Retyped Username and Password:
At "console#" tried typing "copy tftp:///srw2024_16_boot-101.rfb boot" didn't work : "Must be valid URL or reserved keyword"
We have recently purchased SG 300-52Port Cisco Switch to support our Network but they constantly having some bizarre issues or I assume bugs, i.e. we cannot Telnet nor SSH to the switch now, whereas we were able to SSH before, we have set them up for Remote Log Services to get some syslogs and reports but no report have been generated nor logs,
I have done some testing through Wireshark and there are absolutely no reports / logs.We have some real issues with this switch and it’s hard to believe that this is a Cisco Product,
SG 300-52 Port Gigabit Managed Switch Firmware Version (Active Image ) : 1.1.1.8 Firmware Version (Non-active ) : 1.1.0.73 Boot Version : 1.0.0.4
Using a netgear router, windows xp and noontec n5 NAS, I can set up the n5 as a local network drive but, from a friend's house, I canot get to access the n5 remotely using urls such as :ftp://nik@<EIP>.com where nik is the N5 ftp folder name set up and <EIP> is the external ip address detected for the router. The n5 is sold without a user guide and their website has so far not allowed me to download one either
How to access remotely over the Internet to office PC from my home PC and get files that I need? Office's ADSL modem's model is BeWan iBox V1.0 and it has a built-in firewall. ADSL connection has a dynamic IP, which I assume should be configured as static (but how?) Should I investigate VPN capabilities as well? I'm not very knowledgeable about these things.
We have an Asus RT-N56U router at home, which is connected directly to a cable modem. I am attempting to remotely access the router's interface, and am having trouble doing so even after configuring it properly. I configured the router's firewall to allow remote access, using port 8080. I also set up DDNS, although I tried connecting using both the IP and the DDNS name.I also set the router to respond to pings, and I am able to successfully ping the router (from a remote location) using both the DDNS name and the public IP. But when attempting to connect using my browser, it doesn't work. I have tried multiple browsers, multiple remote locations, and disabling my computer's firewall, all with no success.
I have a Windows Home Server 2011 box sitting at home in Washington DC. I have about 1TB worth of stuff on that box. For many reasons, I want to store all my data in a centralized location (that being my WHS box). I then want to access that data through my laptop in London as if the data was in a folder on my computer. I also want to access the data through my mobile phone (android).I just set up filezilla on my WHS box and it works fine if I want to download or upload data. But it won't let me open word files 'off' the server, make changes, and then save it right back. I have to download the word file, make changes, and then reupload that file to the server.
I recently put in a surveillance system with remote access. I have an application on my android phone and it can be viewed by any browser. While I am connected to my network these functions work fine, on my phone and any desktop/laptop. The problem happens when I try to view remotely, off my network. I had this setup on my Netgear router before I got my new fancy schmancy Cicso router becaue the netgear wasn't cutting the cheese in keeping my wireless connectionstory.So here is what I got. I need 3 ports forwarded for this work, and how I got it work on my Netgear. I have these 3 ports forwarded as single ports. I have them forwarded in a range and I have port triggering turned on. No matter what or which combination of these few things I try, I can't access the DVR remotely, again unless I'm local to MY network.Some additional notes - the DVR has a static address and that address has been reserved in the DHCP settings of the router.
I noticed that I cannot remotely check the Topology Services in Ciscoworks LMS 3.2. I have attached a screenshot of the error for reference. When I access Topology Services on the server itself, everything works well.
I recently bought a e4200 v2 and installed connect cloud. I have attached a USB drive to the router. I can connect to it by mapping a network drive on my windows 7 laptop. I can also access it as a media server through my iPad on the local wifi network. This way I can play the music on the USB drive through the iPad. The next thing I would like to accomplish is to be able to listen to the music on the USB drive through the internet (so remotely).
I have configured a router WRV210 and I left it enabled in order to access it remotely, but I can not connect to it. I have checked the settings and everything is fine, but if I try to access it from anywhere in the website does not load, either IE or Firefox or Chrome.
is it possible to use the asa dhcp server function to assign based on mac address (yet)? I have read numerous places that it was not possible (as of 8.2) at least, but I am workin in 8.4. I should have mentioned that I've already tried commands (asa 5510 btw)
I'm looking to be able to access (read and write) a networked external hard drive which is connected to a home router - specifically the Netgear WNDR3400, which has a USB port explicitly for this purpose - from outside the network, via the internet. This is for work purposes (specifically for a small business that I design for). Is this doable? I've been using Dropbox but that's proving too problematic as more and more files need to be managed. I would prefer it not be through software that has to be running on a computer, as there is no "machine" running 24/7 here besides the router itself.
I just switched to the EA4500 Router and I'm now unable to remotely access my camera devices. I have done the port forward. I can access the cameras from my local LAN both when using the local 10. ..and external 99 .. Addresses. When I go off the local connection - Access does not work. Slingbox did its auto configuration and I can access it. I just cant get to camera devices (Panosonic, Foscam, etc.).
I have a Cisco Linksys E2500 modem and I cannot access Zoneminder which is essentially a Linux Security video DVR software package. It is running on a Ubuntu Linux server.
I have HTTP port 80 forwarded to the the static IP address of the Ubuntu server but I repeatedly get a error indicating that the connection timed out whenever I try to access Zoneminder remotely as in remotely accessing it from a coffee shop.
I have absolutely no problem accessing Zoneminder when I on my home local LAN.
I can access other software from remote locations on port 4369 with a TCP preferred protocol setting. That is, port 4369 is forwarded to another Windows workstation with an assigned static IP address. Absolutely no problems with port forwarding of 4369.
Also, I've tested port 80 on the YouGetSignal website which is used for testing port forwarding. The website indicates that port 80 is closed. But when I test port 4369, the website reports that the port is open. Zoneminder which uses port 80 is fully operational when I test port 80 via YouGetsignal.
My ISP has told me that they do not block any ports including port 80.
i have configured SSL VPN on Cisco ASA5510 which is working fine .My Users connected the VPN and access the servers remotely. But now i face one challange my users use PPTP VPN of the customer now a days configured at the Customer Network. When they Connect the PPTP VPN unable to Access the servers remotely defined on the SSL VPN Route.
