How To Remotely Access / Read Or Write And Stream Files
Oct 23, 2011
I have a Windows Home Server 2011 box sitting at home in Washington DC. I have about 1TB worth of stuff on that box. For many reasons, I want to store all my data in a centralized location (that being my WHS box). I then want to access that data through my laptop in London as if the data was in a folder on my computer. I also want to access the data through my mobile phone (android).I just set up filezilla on my WHS box and it works fine if I want to download or upload data. But it won't let me open word files 'off' the server, make changes, and then save it right back. I have to download the word file, make changes, and then reupload that file to the server.
View 3 Replies
ADVERTISEMENT
Jul 17, 2011
Is there any possibility to set linksys E4200 for support anonymous acces to ftp server in read and write mode ?
View 1 Replies
View Related
Jul 9, 2011
I connected my Western Digital Studio II 2TB external harddrive which is formatted NTFS. I can access the drive and read it. But I can't write it. It says I do not have rights. I tried to get to be the owner of the device but it gave some kind of error.
View 2 Replies
View Related
Sep 3, 2011
Here's what I need to do. I have a file server at work that I need to be able to allow our employees to access the files when they are traveling. I know the server's ip address and know how to port forward and how to share certain folders thru windows, but this is all new territory for me.
View 2 Replies
View Related
Nov 14, 2012
trying to stream movies from the USB drive pluged into EA4500 using 3G or remotely. I got Media Server (DLNA) turned on and FTP Server setup. I also setup Dynamic DNS. I can managed to see the media server on iPhoto using WIFI connection with UpnPPeek. I'm wondering if it is possible that any iphone apps like Air Video can be able to stream movie remotely without turn on the computer?
View 9 Replies
View Related
Jul 22, 2012
I bought a seagate USB hard drive today from Target. Its a 2TB and I was going to use it via USB attached to my router. I connected it and the Linksys firmware detected it and I was able to create the appropriate folders on the drive for storage through the linksys GUI.My issue is that I am now trying to move my movies and tv shows over to the drive and it isn't allowing me to do that.
I get an error message that says "You don't have access to //myshare. contact your administrator".
I'm not sure why I was able to create folders on this drive but am unable to move files to it. Makes no sense to me. Write permission is write permission no?My machine which currently stores the media files is windows7 utimate. The router is E3000 using up to date stock firmware.
View 1 Replies
View Related
Aug 21, 2011
If Anonymous Disk Access is selected, read-only files cannot be deleted; nor can the file attributes be changed. This is true even if one attempts to connect as an administrator. Unchecking Anonymous Disk Access and logging on as an administrator fixed this problem for me, but I'd think there are 2 issues.
1. Anonymous Disk Access should allow deletion of ANY files. I would expect this to be a "wide open" setting.
2. If Anonymous Disk Access is selected, a valid login should take precedence.
View 9 Replies
View Related
Jul 8, 2012
I am going back to college and I will need a router. Both my roommate and I were on the same router went over our bandwidth usage a number of times last year. I've done a bit of research and have come up with a few options: Asus rt-n56u, netgear wndr 4500, and the apple airport extreme. Both my desktop and laptop pc so I'm not sure if that effects the outcome. I am going to need a usb port for an ext hdd, which all of them have. All of the routers have a 5hz signal for better streaming. Would I be able to use the apple airport? It seems the have the best reviews. But I question the compatibility and some of the reviews due to possible fanboyism. Also, If I connect my desktop to the router via a crossover cable and have an ext hdd hooked into the router can I transfer files to the ext hdd and stream that data over a 5 hz signal?
View 2 Replies
View Related
Jan 26, 2013
Region : Germany
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : latest
ISP : Kabel BW Germany
I have HDD (Toshiba 500GB) connected to router by USB and started media sharing. (The HDD is started on USB Sharing) Samsung LED UE40D7090 (2011 model) is successfully connected to network,. I can see TP-Link on my LED network but it appears with blue exclamation mark and if i try to access the released folders with files (i can see the files) with TV shows me a message "unknown file formatt" and i can�t access it. On the PC - I can access video, pictures and mp3 content on USB HDD, problem just with TV. If i connect the HDD direct to TV , TV can play all files.
View 5 Replies
View Related
Apr 17, 2012
I have a server connected to my router with a CAT5. I usually manage the server from my laptop connected to the router via WLAN. I often need to add files to a public folder on the server so it can be dowloaded by my clients when they need them. I can access my personal laptop from the server, but I cannot access the server's files from my laptop. This is recent and used to work fine. I also cannot acces other personal computers on my network that I often connect to
View 11 Replies
View Related
Jun 13, 2012
I am using ACS 5.3 with the internal Database for user authentication, I would like to attribute to some users read only rights on the systems. by not configuring an enable password for these users?
View 2 Replies
View Related
Jan 15, 2012
i have one Cisco 3750, am using it as Core Switch where i have 6 more access switches are connected deirectly, and we are using VLANs in our network with the IP reange of 172.16.0.0 , now we had a new Internet connection which is dedicated to Exchange Server only.So we have TWO internet connection One for internet access to all users and another one for only Exchange Server.internet connection for the users is termiated at a Cisco 1700 Series Router and Internet for Exchage Server is terminated at a Cisco ASA Firewall.Now the problem is how can i write an access list, which says that all packets from Exchange server should be routed to ASA Firewall , and all other packets shoulde route to Cisco Router.IP address os Exchange server is 172.16.2.1, 172.16.2.2.
View 13 Replies
View Related
Sep 30, 2010
We are using ACS ver 4.2 and trying to setup users with limited access to our switchs and routers. Here is what we did:
1) Created a user in ACS
2) Create Shell command Autorization Set - ReadOnly
Unmatched Commands - Deny
Commands Added
show
exit
* this should limit the user to the show and exit command only (correct)?
3) Created a group - HelpDesk with the following TACACS+ Settings
Shell (exec) is checked
Priviledge level is check with 15 as the assigned level
Assign a Shell Command Authorization Set for any network device - selected
ReadOnly - shell command autorization set seleted
When the user logs on to the router/switch it appears that he has full access. He can enter the enable command, config terminal command, etc. All we want him to be able to do is to issue the show command.
View 13 Replies
View Related
Apr 13, 2011
I have a wireless router namely D-LINK 524. i know its a prtty old router..but its never let me down ever before..but thn today i decided to play a couple of games online using the psp/ps3 and well both the devices couldnt read the access point..
Then i go onto my pc and the internet on the pc dont work either :'( so then i reboot the modem nd wifi router..but to no avail.So i unplug da routerand connect da modem directly to the pc and it worked..so i was quite stunned..nd i miss playing online..
So to trim it down the problem basically is my phone/ps3/psp cannot find my access point AND my pc doesnt work when connected through the wireless router.
View 4 Replies
View Related
Feb 15, 2011
I would like to ask if its possible to remotely access a WAP54G?
View 3 Replies
View Related
Dec 28, 2011
I have created a share (entire partition) on my external hard drive, which is connected to my E4200 router. The connection to the share is \192.168.1.1ExHDOn the hard drive I've got a folder called "Mijn muziek" (Dutch for My music). So when i go to \192.168.1.1ExHDMijn muziek, the content of the folder is shown. The weird thing is, I can rename the folder, but i cannot add anything to the folder or remove anything from it. I can add files to other folders on the hard driveAnother thing I don't understand is that his folder shows up as "Music" when I create the share.Music is not a folder on the hard drive, but when I go to \192.168.1.1ExHDMusic, i'm in the "Mijn muziek" folder.I have the exact same problems with the folders "Mijn documenten" (shown as Documents) and "Mijn afbeeldingen" (shown as Pictures). Why i don't have write access on the Mijn muziek folder? And how I can manage to get write access on it?
View 4 Replies
View Related
Feb 19, 2012
I configured 2960S switch as http server. I'm unable to access the switch GUI with non privilege 15 user, with privilege 15 user it's working.
View 7 Replies
View Related
Mar 24, 2011
I'm trying to programatically access the MJPG stream from my DCS-930L camera from outside of the DLINK software. Any correct URL for MJPG? Is there any way to view the website contents from this camera so I can hunt this down, or any technical documentation on it?
View 1 Replies
View Related
Apr 20, 2012
Is there any way we can assign or access multiple system with 1 public ip to save public ip's.
View 5 Replies
View Related
Mar 11, 2013
I´m looking for the best configuration to restrict a user to read-only. The restriction should be configured via CLI not TACACS+.
-Hardware: 3750 (probably not interesting for this question)
-Oldest IOS: 12.2(53)SE1
The user should be allowed to: see the running-configurationtrigger all kinds of show-commandsping and traceroute from the device.The user should not be allowed to: upload/delete/rename files on the flash-memoryget into level 15 (not sure if I can avoid this)all other commands despite those from level 1 and those specified above.
View 2 Replies
View Related
Jul 1, 2012
Using a netgear router, windows xp and noontec n5 NAS, I can set up the n5 as a local network drive but, from a friend's house, I canot get to access the n5 remotely using urls such as :ftp://nik@<EIP>.com where nik is the N5 ftp folder name set up and <EIP> is the external ip address detected for the router. The n5 is sold without a user guide and their website has so far not allowed me to download one either
View 3 Replies
View Related
Mar 28, 2013
i am trying to access my 02 router to access my cctv but my router will not allow remote access.
View 2 Replies
View Related
Feb 10, 2013
How to access remotely over the Internet to office PC from my home PC and get files that I need? Office's ADSL modem's model is BeWan iBox V1.0 and it has a built-in firewall. ADSL connection has a dynamic IP, which I assume should be configured as static (but how?) Should I investigate VPN capabilities as well? I'm not very knowledgeable about these things.
View 7 Replies
View Related
Jan 15, 2013
I am living in an apartment complex with free wireless Internet and i turned this old pentium 4 computer into a web/media/file server. I want to be able to access my server away from home but i am extremely limited and i can not forward ports and I have no other kind of network privileges. I am a complete idiot when it comes to networking solutions and I am trying to learn. I have a very vague understanding of vpns and dynamic dns services but i do not understand what i need to access my server from a different network. I setup dns services for my home server but still have not been able to resolve hostnames to actual y point to my server or maybe my networks firewall is blocking me.
View 1 Replies
View Related
Sep 25, 2011
How does one remotely access a SG300-28P?
View 2 Replies
View Related
Nov 14, 2011
We have an Asus RT-N56U router at home, which is connected directly to a cable modem. I am attempting to remotely access the router's interface, and am having trouble doing so even after configuring it properly. I configured the router's firewall to allow remote access, using port 8080. I also set up DDNS, although I tried connecting using both the IP and the DDNS name.I also set the router to respond to pings, and I am able to successfully ping the router (from a remote location) using both the DDNS name and the public IP. But when attempting to connect using my browser, it doesn't work. I have tried multiple browsers, multiple remote locations, and disabling my computer's firewall, all with no success.
View 7 Replies
View Related
May 24, 2012
I recently put in a surveillance system with remote access. I have an application on my android phone and it can be viewed by any browser. While I am connected to my network these functions work fine, on my phone and any desktop/laptop. The problem happens when I try to view remotely, off my network. I had this setup on my Netgear router before I got my new fancy schmancy Cicso router becaue the netgear wasn't cutting the cheese in keeping my wireless connectionstory.So here is what I got. I need 3 ports forwarded for this work, and how I got it work on my Netgear. I have these 3 ports forwarded as single ports. I have them forwarded in a range and I have port triggering turned on. No matter what or which combination of these few things I try, I can't access the DVR remotely, again unless I'm local to MY network.Some additional notes - the DVR has a static address and that address has been reserved in the DHCP settings of the router.
View 5 Replies
View Related
Mar 24, 2012
I noticed that I cannot remotely check the Topology Services in Ciscoworks LMS 3.2. I have attached a screenshot of the error for reference. When I access Topology Services on the server itself, everything works well.
View 5 Replies
View Related
May 15, 2013
I want to remotely access Cisco 500 switches via TELNET and WEB BASED from a server. I dont know the ip addresses for Cisco 500 switches which are configured as backbone which the ip address assigned on the network is static ip address. Specifically I want to get their configuations inorder to get their specified assigned vlans on the network. I know the ip addresses for their specified cisco 500 switches' gateways. I know that cisco 500 switches can be accesses through web. Is there other ways to solve the problem apart from going onsite and connect to the cisco 500 switches using network cable since cisco 500 swithes dont have console ports?
View 1 Replies
View Related
Sep 19, 2012
I recently bought a e4200 v2 and installed connect cloud. I have attached a USB drive to the router. I can connect to it by mapping a network drive on my windows 7 laptop. I can also access it as a media server through my iPad on the local wifi network. This way I can play the music on the USB drive through the iPad. The next thing I would like to accomplish is to be able to listen to the music on the USB drive through the internet (so remotely).
View 2 Replies
View Related
Sep 21, 2011
I have verizon wireless router to connect to the internet via FIOS. The public IP on the wireless router is DHCP assigned. I have my home lab with cisco 2511 and octal cables. I would like to be able to access the terminal server remotely via the internet when I'm not in. I'm concerned cause the wireless router is DHCP assigned IP. Even if I have a static IP on the ethernet port of the 2511 connected to the wireless router, I'm not sure if the NAT will work so it can be accessible from the internet.
View 2 Replies
View Related
Nov 22, 2011
I have configured a router WRV210 and I left it enabled in order to access it remotely, but I can not connect to it. I have checked the settings and everything is fine, but if I try to access it from anywhere in the website does not load, either IE or Firefox or Chrome.
View 7 Replies
View Related
May 14, 2012
I'm looking to be able to access (read and write) a networked external hard drive which is connected to a home router - specifically the Netgear WNDR3400, which has a USB port explicitly for this purpose - from outside the network, via the internet. This is for work purposes (specifically for a small business that I design for). Is this doable? I've been using Dropbox but that's proving too problematic as more and more files need to be managed. I would prefer it not be through software that has to be running on a computer, as there is no "machine" running 24/7 here besides the router itself.
View 1 Replies
View Related