Cisco Application :: Router 851 Cannot Load Yahoo Page

Mar 21, 2012

We have 50 subscriber using Cisco Router 851 can't loading page yahoo.

View 1 Replies


ADVERTISEMENT

Facebook And Yahoo Load Only Text On The Left Side Of The Page And Internet Is Slow?

Oct 23, 2011

I turned on my PC and started using Facebook normally, it was a bit slower than usual and then suddenly, it didn't load anymore. I tried more than once, but then it started loading only text on the left side of the page and I couldn't use it practically. This happened also with Yahoo, but I didn't see it happening with some other websites, they work totally normally.I stress I have tried clearing the whole cache and history of Google Chrome and Mozilla Firefox, system restore, check of sfc.exe, creation of new user account, running of an Ubuntu LIVE CD, uninstallation of all browsers and installation of the latest versions once again, changing of the MTU to 1500, turning off my router and antenna but unfortunately nothing has worked till now.What wonders me is that Facebook works normally on my laptop which uses wireless connection provided by the same router and antenna.

View 1 Replies View Related

Why Not Opening Yahoo Home Page

Dec 14, 2011

I am not abel to open yahoo home page I tried all security option and also formate system but still not able to open yahoo all other web site like gmail rediff etc are working properly?

View 1 Replies View Related

Cisco :: How To Allow Yahoo Chat Application

Nov 28, 2011

I would like to allow yahoo chat application to a particular user in my office thru Cisco ASA, can i have configuration for this The list of IP addresses and port number which is Yahoo Chat is using.

View 2 Replies View Related

Broadband :: Unable To Load Yahoo Msn Live Sites?

Dec 19, 2011

Loading yahoo page on windows 7.

View 1 Replies View Related

Security / Firewalls :: Yahoo Fantasy Draft Applet Won't Load

Aug 27, 2011

So ive been trying to enter a yahoo fantasy hockey mock draft and it wont seem to load. Ive tried both IE and Firefox, no luck..ive updated my adobe and jave..no luck i cant seem to get it to load..

View 2 Replies View Related

D-Link DIR-655 :: How To Bridge Router - Page Doesn't Load

Apr 23, 2012

I am using a DIR 655 router with a DSL 526B modem/router combo. I always get a message saying "Oops! The page you requested is not available.". The page doesnt load (It sometimes does if I keep refreshing again and again). I read somewhere that it might be because I have to bridge my modem/router with my router

View 1 Replies View Related

IE Home Page Won't Load?

Apr 3, 2011

My grandma is trying to get on her IE. She is connected to the internet, but when she opens IE it says "connecting to home page" but nothing will load... it just keeps showing its connecting but never connects.

She has re started her computer, unplugged everything and reset the internet modem, but has no such luck

View 3 Replies View Related

Dell :: Wireless-N 1030 Cannot Load One Page

Mar 24, 2012

I have an inspiron, with an Intel Centrioun Wireless-N 1030, that I purchased new just two months ago. I just recently starting having trouble with the wireless internet connection. I am able to connect 95% of the time, but then I cannot load one page. Occasionally, it will speed up and I have a good connection for a few minutes, but then I lose it again.  It happens on battery or cord, with two different networks (one large school network and my home network). It doesn't happen if I am on a land/wired connection. The two other computers in my house, two and four years old, are having no trouble with the wireless connections. I have been using the current modem at my house since i bought the computer. Today, we reset the modem to factory settings, with no change. We also did several ping tests and had a 9% failure rate pinging th modem.  I have also changed it to run at max power all the time and disabled the option to turn off when lower power, with no change. I have also attempted to update the driver through the device manager.

View 10 Replies View Related

Cisco Switching/Routing :: SLM248G - Admin Page Fails To Fully Load?

Nov 11, 2012

We have an SLM248G switch which seems to be giving a few problems.  When attempting to access the switch, the admin page loads but after logging-in, the admin portal page does not load fully, see screenshot.
 
Even after a factory reset (reset button held), the issue continues.  Is there any other workaround for completely resetting everything?

View 2 Replies View Related

Lenovo Notebook Shows Internet Connection / Web Page Doesn't Load

Oct 23, 2012

My lenovo notebook shows internet connection is there but web page doesnt load

View 4 Replies View Related

Cisco Application :: URL Load Balancing In ACE 20?

May 23, 2011

I have 2 rservers 10.30.1.73, 10.30.1.76,I have 3 URLs in both

[URL]
 
I want to have only one link for two same link in both servers with this ip address 10.30.1.172 so I will have 3 link and will load balance to 6 links

[URL]

View 4 Replies View Related

Cisco Application :: 4710 - ACE Sharepoint Setup / Keep Getting IIS Splash Page?

Apr 9, 2012

I have setup load-balancing on an ACE 4710 for HTTP for Sharepoint 2010. The Server Admin says that the IIS server will recognize the right site by DNS name. Problem is I have no clue how to make sure the servers get the DNS name passed to them. They says this is for a multi-homing setup so that we can run multiple sites using the same VIP to the same Serverfarm. How do I do this? I keep getting the IIS splash page since the real server cannot determine the IIS site that I am supposed to access.

View 2 Replies View Related

Cisco Application :: 389 Load Balancing LDAP In ACE?

Dec 5, 2011

Does loadbalancing ldap services in ACE? Both port 389 and 636.

View 4 Replies View Related

Cisco Application :: SIP Load Balancing With ACE 4710?

Nov 8, 2011

SIP Load balancing Issue with ACE 4710?I have a Cisco ace 4710 with vesion Version A4(2.2). i configued simple SIP load balancing first without stickiness. without stikeiness we are having a problem because bye packet at the was not going to the same server all the time that left our port in used even though user hang up the phone. its happen randmly. i have a total 20 licenced ports and its fill out very quickly. so i dicided to use the stickiness with call-ID but still same issue. below is the config
 
rserver host CIN-VOX-31
  ip address 172.20.130.31
  inservice
rserver host CIN-VOX-32
  ip address 172.20.130.32
  inservice

[code].....

View 6 Replies View Related

Cisco Application :: ACE20 Load Balancing

Apr 26, 2011

I have a problem with the ACE 20 load balance
 
To start with following is our architectural request flow:

Load Balancer --> Webseal /(reverse proxy) --> HTTP Server --> Portal Server

We have Hardware Load Balancer Cisco ACE20. When we access our portal from Webseal server it works totally fine without any issue, but when we access the same application using ACE we face the following issues:

1) Some of the links on do not work. For eg: We have a link "subscribe" which points to [URL], whenever we click on this link, the request is directed to [URL] i.e homepage

2) URL redirection does not work We have some links which have a url forwarding or redirection for example when we open [URL] it forwards the requests to [URL] opendocument....., but this redirection fails and again the request is thrown to homepage i.e., [URL]

3) The response of the request and the overall portal when accessed via ACE is very sluggish and it takes 20 seconds for homepage to load, whereas the homepage loads in 4 secs when accessed via webseal.

Below is the ACE details.

Hardware Product Number: ACE20-MOD-K9  Card Index:     207  Hardware Rev:   2.3  Feature Bits:   0000 0002  Slot No. :      7  Type:           ACE
Software  loader:    Version 12.2[120]  system:    Version A2(1.4) [build 3.0(0)A2(1.4) adbuild_11:54:12-2009/03/05_/auto/adbu-rel2/rel_a2_1_4_throttle/REL_3_0_0_A2_1_4]  system image file: [LCP] disk0:c6ace-t1k9-mz.A2_1_4.bin  installed license: ACE-SEC-LIC-K9

View 3 Replies View Related

Cisco Application :: ACE 4700 Not Load Balancing

Oct 26, 2011

I'm running an ACE 4700 appliance, i have a 4 server serverfarm setup, non-ssl, with leastconns predictor...i have tried round robin as well, and nothing...
 
I've taken each rserver out of service, and placed back in, and still, the traffic is handed off only to 1 server...
 
I do have sticky persistence (IP subnet)...

View 8 Replies View Related

Cisco Application :: Load Balancer For ACE-4710

Mar 25, 2012

I am receiving this error while the device is booting up :
 
kernel=(hd0,1)/c4710ace-t1k9-mz.A5_1_1.bin ro root=LABEL=/ auto console=ttyS0,9
600n8 quiet bigphysarea=32768 [Linux-bzImage, setup=0x1400, size=0xe719b73]

View 1 Replies View Related

Cisco Application :: ACE 4710 Webpage Very Slow To Load When Going To ACE

Aug 13, 2012

Experienced the same sort of behaviour with an ACE 4710 version A3 (2.5). When trying to connect to a webpage on port 443, the pages over 1 minute to download fully. I have timed the download using the plug-in firefox. What is strange is that the browser successfully makes the connection, 200OK etc,  but each 'get' takes a very long time to transfer. If I go directly to the server and don't pass via the ACE the page takes between .7 and 1 second to transfer.Is there a way to speed this transfer up, I am currently looking at connection maps.

View 1 Replies View Related

Cisco Application :: ACE 4710 Load Balancer Usage

Dec 13, 2011

We are using Cisco ACE 4710 for load balancing the servers. The predictor used is 'least connections'.Have observed the below;The number of connections for a particular server in a serverfarm is 15 in the Cisco ACE.The actual number of users in that server is 6.All the users access using the VIP.Still i couldn't understand why there is difference in the number of users in the server and the load balancer statistics.

View 2 Replies View Related

Cisco Application :: 4710 - Load Balance Two / Three ISPs Using ACE?

Oct 16, 2011

How to load balance two/three ISPs using ACE.
 
What might be the default gateway?Can i create a serverfarm with two rserver with different subnets?

View 4 Replies View Related

Cisco Application :: ACE 4710 Server Load Balancing?

Jul 7, 2012

We have two Cisco ACE 4710 and we want to install both of the devices in HA with load balancing mode.While i have done HA mode configuration between ACE 4710.But unable to configure load balancing configuration between them.i want to tell you connectivity between server,client & loadbalancer.Our Web servers are connected to VLAN 152 on the L3 (3750) switch.Which are alreday working in redundancy between other L3.And ACE 4710 it is also connected to vlan 150 which are connected to same L3 (3750) switches and users are also connected to vlan 6 on the same L3 itself. 

View 2 Replies View Related

Cisco Application Networking :: ACE 4710 Configuration Of Load Balancer

Jan 22, 2013

I am configuring a load balancer from cisco, a ACE 4710.Load blancing is completely new to me, and i am unexpereinced in this field. It has to be configured for a customer that want to load balance HTTP and RTSP traffic over 4 application servers (Back-end),I searched alot on google for possible solutions, and got RTSP in some way to work, but http wont work says my customer.

[Code] .....

View 3 Replies View Related

Cisco Application :: CSS 11501 Load Balancing With X-forwarded For Address

Sep 15, 2011

We have a pair of CSS 11501,Currently it is using source ip for load balancing and 5 servers as backend , however we have users loggin in using http and based on its source IP (ISP PROXY) , it is forwarded to SERVER A.However, we have a SSL page and when the client switches over to SSL , it is forwarded to SERVER B/C/D/E  based on its source IP ( REAL CLIENT IP) .This will cause the user to be terminated as the 5 servers are independent and not running in a cluster.
 
Is there any way that we can use the X-Forwarded-For address to load balance so that when users loging , they are sent to SERVER A (Based on X-Forwarded-For Header IP which translate to REAL CLIENT IP).This way we are able to also send it back to the same server when it uses SSL.I believe that we should be able to load balance using X-Forwarded-For IP or to rewrite the X-Forwarded-For IP into client source IP.

View 3 Replies View Related

Cisco Application :: How To Capture Packet In Load Balancer CSS11501

Jan 15, 2012

how to capture the incoming and outgoing packets on the balancer?The load balancer is connected in between the customer DCN and cisco switches 2960.The reason of capturing both incoming and outgoing packets on the balancer is to prove to our customer that there is no packet loss issue on the balancer, and it could be some issue on their DCN network.Since it is a production server, I will need to ensure that there is no impact to the incoming and outgoing traffic on the balancer and other networking equipments as well.

View 1 Replies View Related

Cisco Application :: Ace 4710 - Same Context Routed And Load-sharing?

May 16, 2012

Can an ACE 4710 have , in the same context - servers which are

a. just being routed to

b. a set of load-shared servers
 
I have been told you may not be able to do this on this version?

View 2 Replies View Related

Cisco Application :: ACE30 Load Balancing Across Two Slightly Different Servers

Apr 10, 2013

is there a possibility to get a load balancing across two rservers so: when client sends http://vip/ and it goes to rserver1 then url is sent without change when client sends http://vip/ and it goes to rserver2 then url is modified to http://vip/xyz/
 
Or maybe load balancing can be done across two serverfarms ?

View 3 Replies View Related

Cisco Application :: ACE 4710 HTTPS Load Balance Configuration

Apr 16, 2012

Have two ACE 4710 in HA setup. We would like to setup HTTPS loadbalance(actually just a primary and standby configuration in the serverfarm). Initially this would be for Exchange OWA connections but may expand to more HTTPS connections later. I know there are several ways to do SSL with the ACE( client, server, end-to-end). I am just wanting to know the easiest way to deploy this? Is a certificate always needed on the ACE for each connection? In HA mode would a certificate be needed for both or does it replicate in some way to the other ACE?

View 6 Replies View Related

Cisco Application :: CSS 11500 - Why Website Inaccessible Through Load Balancer

Nov 30, 2011

We have a CSS 11503 with the following partial config [code] it is clear that the server at 10.10.10.222 is active.  What we cannot understand is why web site is inaccessible thru load balancer using http://10.10.10.1.

View 2 Replies View Related

Cisco Application :: ACE 4710 - Load Balance Https Based On Url

Nov 15, 2011

I am trying to configure ACE 4710 to load balance base on the URL, If it matches the specific URL ( /456/ ), the traffic will be sent to server farm 456 else the traffic will be sent to server farm 123.
 
I attached an image of the topology.
 
Ace Config: 
 
rserver host SRV01_123
ip address 192.168.1.101
inservice

[Code].....

View 4 Replies View Related

Cisco Application :: ACE 4710 (1) SSL Certificate Import ( 2 ) With Load Balancing?

Dec 3, 2012

I am performing a deployment, in which i require clarity on the following. Our setup has DC and DR , in each site we have two devices for HA.We have received One SSL Certificate from Public CA, Kindly clarify the following doubts i have on thisIn Doc, i found Cert.pem and key.pem is required to generate the pair ,do i receive both Cert.pem and key.pem from the CA or we can generate key.pem from Cert.pem ?SSL Offloading is planned for the X application, and it is running in both DC and DR ( Considering each having their own Public IP address ) , do i need to have two different public certificates or a single certificate can i use in both DC and DR.Load Balancing IssueIs it possible to configure in ACE to access the service in Business hours and in non Business hours to display HTML page showing this is available only during these hours ?In DC we have Three Web Servers ( only in One physical server the service is active, other two are backup ), and these three servers are under cluster and shares one cluster IP , In ACE we have created the VIP and Pointed to only Cluster IP ( like pass through only ). The issue we face is if active web server is down, even then ACE is sending the traffic to that webserver only instead of sending it to the new Active web server. let us know if any solution is there to overcome this issue ?as per my understanding instead of giving cluster IP as real server IP we can issue the three physical servers. now i dont require load balancing between three servers instead require failover king like if first server is down then it should forward to Second server ?

View 4 Replies View Related

Cisco Application :: ACE 4710 Load Balance Only If Primary Server Fails

Oct 14, 2012

I've done a lot of ACE work over the years but this is the first time this has ever come up. 
 
I have a request from an application group where I have 3 rserver in the server farm but they want all traffic to only go to the first server unless that server fails.  If the first server fails, only then do they want traffic to go to the 2nd server instead and if that fails, then traffic goes to the 3rd.
 
I've read through the documentation but haven't figured out a way to do this. What to do this type of failover configuration?

View 4 Replies View Related

Cisco Application :: ACE30 Normal Load Balancing In Routed Mode

Sep 23, 2012

We are in the situation we have a active configuration with ACE30 doing normal load balancing in routed mode, we have tons of rservers going out on a VIP.we now had to add a new private network to a provider that strangely enough does not want to see our public or private addresses. we need to loadbalance towards him on a priovided subnet (still rfc1918) (IOS VRF bug? is that correct?)I have two options, add the network (new interface) to the active loadbalancers (contexts) and then tie in new policies to the active serverfarms or make a new context just to load balance towards this provider.(preferred)Now - If I do this, the rservers see the client source addresses from this new provider. as the loadbalancer does not "hide" the client IP's. I would then have to add static routers toward the new context - I would want to skip that.
 
is there a way, to make the loadbalancer hide the client addresses towards the rservers ? perhaps I'm just needing the correct search term to find the config example.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved