Cisco Firewall :: ASA 5505 All Lights Flashing After A Memory Upgrade
Aug 29, 2012
I have DSL 8Mbps DL and 768kbps UL,Internet -> Modem -> Cisco Router -> Firewall -> Switch Core - > Multiple switches like sfe2000p,CiscoRouter: i use port gig0/1 for PPPoE and i use port gig0/2 for LAN static,Router port gig0/2 with 122.54.144.153/29 connected directly to Firewall port13 with 122.54.144.154/29,i want 122.54.144.153/29 will my default gateway,Please include no limit bandwidth,filter etc at router, Firewall will be DHCP Server and control the bandwidth, filtering etc and the client computer should get 8Mbps.
View 2 Replies
ADVERTISEMENT
Jan 30, 2012
I am trying to get experience with 8.4 code on my 5505. I purchased a Cisco 512MB memory upgrade and installed it. It booted up once and I thought I was ok. I then looked down and noticed that all lights were blinking on the front panel and I had no console access.
[code]...
View 5 Replies
View Related
Mar 1, 2013
I recently upgraded the flash and the RAM on one of my ASA 5505 lab machines. The flash was upgraded from 128 to 512MB and the RAM was also upgraded from 256 to 512MB. I am using asa845-k8.bin. The firewall boots and runs file until you issue the reload command. The system shuts down but never reloads.
View 11 Replies
View Related
Jul 10, 2011
There was a problem with one of our servers. We were unable to connect to it remotely. We restarted the server. Still we were unable to communicate with it. Static IP is provided.
In the connections settings, it showed the send and receive as 0. I noticed the network card lights. Both were flashing green in sync, like twice in one second. I removed the cable and funny thing was, it was still blinking non stop in the same way. I plugged the cable back in and took back out, the same result. After a second restart of the server, it started working normally and i was able to communicate with the server.
View 1 Replies
View Related
Aug 9, 2011
We have a Cisco SRP 527W router that was not showing up on the LAN. so we tried a Factory Default reset but it seems to be dead.
The power light is flashing constantly,the 4 LAN light are constantly on,the DSL Data light comes on for 1 sec when device is powered up.
i have tried connecting directly to a PC, the NIC reports as network cable unplugged.i have tried the (power on device, hold down reset button, power of after 30 sec, power on after 5 sec, release reset button after 5 sec) but still "network cable unplugged".
the firmware flash utility will not find the NIC the device is connected to.the router is less than a year old, is there a fix or is it a warranty replacement ?
View 2 Replies
View Related
May 5, 2012
Thinking back, about a month ago I updated the firmware (I can't check version at the moment). The switch has been working fine since then. Today I needed to move some power cables and the switch lost power. Now ALL of the LED lights are flashing green and I can't access the switch. I've tried setting a static IP on my laptop to 192.168.1.20, mask 255.255.255.0, and accessing the switch on 192.168.1.254, but there's no response. I've tried holding in the reset button for at least 30 seconds while the switch is powered on, AND while powering it on. None of that has worked. Also when I first power it on, the system LED flashes orange very quickly for a second or so, then all of the LEDS start flashing green.
View 5 Replies
View Related
Jan 21, 2013
Region : Others
Model : TL-WR740N
Hardware Version : V4
Firmware Version :
ISP :
My router is not working and only all lights are flashing everytime after interval of 2 seconds.
View 1 Replies
View Related
Aug 23, 2012
My EA4500 is not working. The power indicator light is on but the green and yellow lights on the Internet port are not flashing and the modem the EA4500 is connected to show no activity on that port. Also, the EA4500 is not broadcasting so I can't even connect to it to use Cisco Connect to troubleshoot. I tried resetting it but it did nothing. This has happened before but is usally fixed with a reset.
View 8 Replies
View Related
Feb 22, 2012
i have cisco ASA 5510 Firewall using in my network, i have planning to upgrade the Flash memory from 256 mb to 512 mb and the RAM from 256 mb to 1GB.
View 1 Replies
View Related
Sep 16, 2010
I need to add memory to my ASA 55xx's (running 8.2(2)), some of which are config'd active/active or active/standby. The docs say that ram must be identical, which makes sense for production. My question is this: can I upgrade the standby units first, make them active, and then upgrade their mate? Or must I schedule downtime to take the pair down for the upgrade?
View 4 Replies
View Related
May 10, 2011
I upgraded our ASA5540 to 8.4, THEN noted the increased requirements for Memory. I purchased the 2Gig upgrade, but when installing in the Primary unit today, noted that there were 4 slots. Slots 1/3 had 512Mb modules, so I installed the 2 x 1Gig modules in slots 2/4.
The ASA5540 came up clean, and it "sees" the entire 3Gig of memory.
My question: Is this a SUPPORTED configuration? All documentation I have read only mentions 2Gig of memory. Also, If I had FOUR x 1Gig memory modules, would the ASA5540 support the 4Gigs of memory?
View 1 Replies
View Related
Jul 6, 2011
We want to run ASA 8.4.x on an old ASA5540. We need to upgrade its memory to 2 GB with the following memory upgrade: ASA5540-MEM-2GB=
I suspect that we will completely remove the existing 1 GB of memory and replace it with 2 GB. If this is the case, can I use this 1 GB of memory removed from the ASA5540 and put it in a ASA5510 instead of buying a ASA5510-MEM-1GB= for the ASA5510?
View 2 Replies
View Related
Nov 7, 2011
I tried last night to upgrade the memory in my old 5510. It's about 5 years old and has the single memory socket. I followed the instruction included in the kit:
Mfr. Part#: ASA5510-MEM-1GB
I did wear an ESD wrist strap (genuine Cisco at that!) and ensured the memory was fully seated, the handles locked in.Upon restarting the ASA, for over 15 minutes, it stayed in mode: Power LED steady, Status LED flashing, other LEDs off. No response to attempts to SSL via Putty. I powered it off, verified the memory was indeed fully seated, and re-installed the original 256 MB module. It powered up normally in less than 5 minutes. Is there anything else to try before returning the memory? Tonight, I can try the same new memoy module and see if it works.
View 3 Replies
View Related
Aug 6, 2012
Got an ASA 5505 with the standard 256MB memory. I recently upgrade from 8.2.5 to 8.4.4, and converted over the NAT rules. Problem is, I'm now running very low on memory (RAM): [code]
The ASA doesn't do anything too fancy. Just 1 VPN and 4 inside hosts. Is there any easy way to free up memory, or do I just have to bite the bullet and upgrade to 512MB?
View 6 Replies
View Related
Feb 27, 2013
I'd like to see some REAL LIFE comparisons of ASA firewall throughput (a bit like this one for ISR G2 Routers - [URL].
The reason I ask is that I recently upgraded a firewall from an ASA5505 to an ASA5520 on a small network where the only outside connectivity was a single 10meg Internet circuit with an IPSEC VPN (not landed on the firewall but on a router) to another site.
When I swapped out the firewall the users noticed a big improvement. The firewall is not doing anything out of the ordinary - no IPS or VPN, just standard state full inspection.
View 5 Replies
View Related
Feb 27, 2011
I'm getting ready to reload an ASA that will be a long drive if it doesn't come back up after this upgrade attempt.
View 9 Replies
View Related
Apr 20, 2011
I open case open to the Cisco about I am not able to get the SSH connection from ASA 5505 after upgrade the IOS 8.2.3 and Device Manager 6.3.3 from the older IOS 7.2.4 and device manager 5.2.4.
I am working in MNC and we have more than 30 office around the world.We have all offices have ASA5505 which we upgrade 3 years before and Now We are in procession to upgrade the IOS on all ASA5505 to all 30 offices.
But after I upgrade the 10 offices and relieze that not able to get SSH connection to ASA5505 with new IOS 8.2.3.I opened the 2 times case and call the Cisco Technical but no luck so far.
View 11 Replies
View Related
Jan 18, 2012
I have been delaying an upgrade past 8.2.5 because it is stable and I didnt feel like learning a new way of doing NAT because of the way the code was changed. What is forcing me to go down this path is that I need to be able to let protocol 41 pass through the firewall which doesnt work in 8.2.5 and is what is making me look at 8.3 or 8.4
I know that I will have to install a memory upgrade on both my lab 5505's before I can install the upgraded binary. Will be ordering that in the next few days.
Any suggestions on going to 8.3 or 8.4 based on the reason for the upgrade ? I had been told by TAC to stay away from 8.3 but never got a good reason for that. My lab config (i.e. home ASA) is pretty straight forward (no SSL or IPSEC config), so I would hope it would go fairly smooth. I had heard a lot of horror stories early on but wanted to see how things had been going for everyone with the later versions of code.
View 1 Replies
View Related
Aug 3, 2011
I just upgraded an ASA5505 running 8.4.1 to 8.4.2 after noticing that I was experiencing the ssh bug described here: [URL]. Now every time I reload the unit I get the following message on the console:
Reading from flash...
!!...
Cryptochecksum (unchanged): b19f76ce 30b189e5 9272b4d4 4f746634
Type '?' for a list of available commands.
[Code]...
I tried searching for this message with no luck at all. The firewall seems to be working ok as I can still get online and my VPN tunnels are up,
View 3 Replies
View Related
Feb 28, 2013
I have been browsing the forum and the support notes for a couple of hours and haven't found a definitive answer to my question. Our ASA is on the subject versions. I watched a video on YouTube stating that upgrading the ASA is easiest if you upgrade ASDM, then the ASA. Problem is, I don't think I can upgrade ASDM first because I don't see a version that is compatible with ASA 7.2.x and 8.0.x.
View 3 Replies
View Related
Jan 24, 2013
I am trying to find out the best path to upgrade to two ASA 5510 running 9.0 (1). I know there are changes in the new version. Let me know what information you need and i will post.
View 2 Replies
View Related
Dec 17, 2012
I have a Cisco ASA 5505 device with basic (default) license, currently all my reirections, VPN's, VLAN's(3 Vlan's) etc are configured on the same and are working fine.Now i need to upgrade my basic license to "Security Plus" for some additional features, if i upgrade it directley is there any complications in present rules, below is my doubhts
1. if i upgrade, did it change any of my present configurations ?
2. is there any name change or property changes for VLAN's or VPN's
3. did it affect the firewall functions
4. If anything goes wrong, can i restore it in to my old state using my previous dump.
View 1 Replies
View Related
Nov 16, 2011
I have successifuly upgraded ASA and ASDM image. My question is how to make it to boot it as default when you do a factory reset of the device. For the ASA image I found out that it will boot the first image it founds on the flash, so I left only the latest bin file and if I do factory reset it boot the latest. But for ASDM it still boots the old one, because there is no "asdm image disk0:/asdm-645.bin" command in the config. I`m not sure how, because I only left the new ASDM bin image. Is there any variable or something that still points to old asdm image?
My ASA version is 8.4(2) and ASDM 6.4(5). The old one was ASA 8.2 and ASDM 6.3.
View 2 Replies
View Related
Apr 19, 2012
We want to upgrade one of our Cisco 5505 with Security Plus license. what is the difference between L-ASA5505-SEC-PL and ASA5505-SEC-PL upgrade licenses?
View 1 Replies
View Related
Aug 21, 2012
I have several ASA-5505 units with the SecurityPlus license. These are running older OS versions and I would like to upgrade them. I am wondering if I will lose the SecurityPlus if I upgrade the image to 8.3
View 4 Replies
View Related
Mar 24, 2011
Upgrading the memory on an 1841. After inserting a 256MB/PC133/SDRAM/DIMM it would not post during the boot, hangs.If i take out the chip it works fine.The on-board memory is 128, so the 256 is the max it would take to a total of 384. According to the documentation this should work.The memory chip is a Transcend chip, basically Samsung.
View 2 Replies
View Related
Sep 19, 2012
Before upgrading to 8.4(4)1 I was able to ping our inside interface accross the VPN. Now I cannot. Because ping is not working, my SNMP server thinks that the device is offline however I know the VPN tunnel is still up and the remote branch office is working fine. Here is the config of the branch office ASA 5505 in question. How to get icmp working again?
ASA Version 8.4(4)1
!
hostname BranchASA5505
domain-name houston.deh
[Code].....
View 2 Replies
View Related
Oct 18, 2012
My macbook pro recently upgraded to the last version of java and now I can open the ASDM for my Cisco ASA 5505, when I try open, only show me the window of Java 7 ..., and don't load the ASDM.
View 15 Replies
View Related
Jan 30, 2013
I wanted to know how many sodium memory slots the 1841 Routers have so i can upgrade to more then 128mb of DRAMI want ideally 256+on the Cisco website in the diagrams they dont say if it has 1 or 2 slots
View 8 Replies
View Related
May 11, 2011
Trying to figure out if I can upgrade this flexwan to 256MB and not sure is the card below already has 256MB total or 1 64MB per PA equaling 128MB total.
View 1 Replies
View Related
Feb 25, 2012
Currently I have C2801 with 256MB of memory and 64MB of flash. I want to upgrade it to 384MB / 128MB.Do I need to get MEM2801-256D or I can use any PC133 SDRAM (144PIN) for memory? 384 is maximum I can install? Do I need to get MEM1800-128CF or I can use any compant flash card? 128MB is maximum I can install? (I saw 256MB flash on for C2801)
View 10 Replies
View Related
Feb 20, 2013
I am upgrading 6500 switch from old ios to new one and the new one requires 512/512 memory to be free below is the show ver and sh sup-bootflash,
sw-cta2-i8-off>sh ver
Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9-VM), Version 12.2
[Code].....
View 1 Replies
View Related
Jun 5, 2011
I used ASDM to upgrade a 5505 tonight and now I get the error message attached. How/where do I find out which versions are compatible?
View 2 Replies
View Related
