Cisco Firewall :: ASA 5505 Security Plus License Upgrade?

Apr 19, 2012

We want to upgrade one of our Cisco 5505 with Security Plus license. what is the difference between L-ASA5505-SEC-PL and ASA5505-SEC-PL upgrade licenses?

View 1 Replies


ADVERTISEMENT

Cisco Firewall :: ASA 5505 License Upgrade

Dec 17, 2012

I have a Cisco ASA 5505 device with basic (default) license, currently all my reirections, VPN's, VLAN's(3 Vlan's) etc are configured on the same and are working fine.Now i need to upgrade my basic license to "Security Plus" for some additional features, if i upgrade it directley is there any complications in present rules, below is my doubhts
 
1. if i upgrade, did it change any of my present configurations ?
2. is there any name change or property changes for VLAN's or VPN's
3. did it affect the firewall functions
4. If anything goes wrong, can i restore it in to my old state using my previous dump.

View 1 Replies View Related

Cisco Firewall :: Adding Second Subnet On ASA 5505 With Security Plus License

Jan 31, 2012

We recently upgraded a ASA 5505 with the security plus license to allow us to add a second subnet, but are having a few problems configuring the second subnet.  The original subnet we have configured 10.1.1.0 is able to access the internet without any problems.  However the new subnet 10.1.5.0 is unable to access the internet and when we ran a trace packet the nat config nat (inside) 1 0.0.0.0 0.0.0.0 is showing as the rule that drops the packet.
 
Additionally we have not been able to get the 2 subnets to talk to each other even though same-security-traffic permit inter-interface is configured.  How to configure the subnet 10.1.5.0 to access the internet or to get the subnets to communicate.  Below is a streamlined version of our current config.

!interface Vlan1nameif insidesecurity-level 100ip address 10.1.1.1 255.255.255.0 ospf cost 10!interface Vlan2nameif outsidesecurity-level 0ip address 66.66.66.66 255.255.255.240 ospf cost 10!interface Vlan13nameif corporatesecurity-level 100ip

[Code].....

View 15 Replies View Related

Cisco Firewall :: ASA 5505 Security License And Vlans Supported?

May 18, 2013

I am buying ASA 5505 with security  license. It says it can support 20 vlans does it support 20 vlans by allowing to create subinterfaces? As it has 8 physical ports only?

View 3 Replies View Related

Cisco Firewall :: Difference Of VPN Plus License And Security Plus License ASA 5520

Oct 16, 2012

What's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.

View 1 Replies View Related

Cisco WAN :: 1921 - IOS Upgrade With Security License?

Nov 4, 2011

I have a Cisco 1921 ISR Router with Security License running software version 15.0. I want to upgrade the router to 15.1. But I don't want to lose the security license that came with the router. When I look at the IOS downloads page on Cisco, all I see is universal images for all versions of 15.1.
 
My question is - where is the security license stored? In the IOS or programmed in somewhere else of the router? If I upgrade my router to one of the newer 15.1 universal images, will I lose my security license?

View 2 Replies View Related

Cisco VPN :: 5505 - SSL License Upgrade?

Aug 11, 2011

My client is having a 5505 which supports 2 SSL peers as per now and we want an upgrade . I had a look into GPL and I was confused with two of the following part numbers . Which one should I go for as both of these look same for me and there is a huge difference in price .
 
ASA5500-SSL-10
ASA 5500 SSL VPN 10  Premium User License
ASA-AC-E-5505
AnyConnect Essentials VPN License - ASA 5505 (25 Users)

View 4 Replies View Related

Cisco WAN :: Upgrade License 1941-K9 From IPBase To Security

Oct 25, 2011

I would like to Upgrade license Cisco 1941-K9 from ipbase to security

View 5 Replies View Related

Cisco Security :: ASA 5545 - 8.6 - Active / Standby - License Upgrade

Feb 4, 2013

We are planning to upgrade the ASA license in an A/S pair by adding the ASA5500-SC-20= license. The ASA is 5545 and runs 8.6. According to documentation, after 8.3 version, the ASAs can share a license features and do not require the same license on both boxes. I run a test in GNS3 with 8.4(2) images and I saw that by adding the 'activation-key' command only on the primary unit did the job as the 'show activation-key' output shows. In order to be 100% sure would like to verify the following:

Putting the activation-key only on the primary unit is enough and there is no need to do anything elseIn case the primary unit is standby, again we have to put the actication-key command on the primary unit (I am asking this because the 'activation-key' command is not listed under the commands that are not replicated to the other unitk, but doesn't make sense to be replicated since the activation-key is 'tied' with the S/N of the device).

View 4 Replies View Related

Cisco Switching/Routing :: License Upgrade In 2900 For Security K9 Feature?

Dec 18, 2012

i have 2921 router with base license . i want to upgrade to it to security k9 feature or want to enable it. i have license file with product activation key. how should i do it. if any body have screen shot file

View 1 Replies View Related

Cisco Firewall :: Unable To Upgrade Pix-525 FO License?

Feb 10, 2012

Not  abe to upgrade the IOS image PIx7.0  from earlier version 6.3   in  to my old Pix-525 FO(Secondary unit) license box .
 
Is it possible to upgrade without Primary unit (Unrestricted License)  ?

View 6 Replies View Related

Cisco Firewall :: Upgrade License On ASA 5510?

Oct 12, 2011

I have a two ASA HA and I'd like to upgrade the license to ASA5500-SSL-250. I need to know if i have to purchase one license (ASA5500-SSL-250) for the Active unit and one license  (ASA5500-SSL-250) for the standby unit.

View 3 Replies View Related

Cisco Firewall :: ASA5505-SW-10-UL - How To Upgrade License

May 10, 2011

I want to confirm if the upgrade license (ASA5505-SW-10-UL=) is backward compactible with PIX 501 firewall device? though pix 501is end of life bit i want to verify if the upgrade license for asa5505 will work with it?

View 4 Replies View Related

Cisco Firewall :: ASA 5512 - Cannot Connect To VPN After License Upgrade

May 1, 2013

I am having an issue where I can't connect to VPN after upgrading the license. The license upgraded is related to AnyConnect VPN. I noticed from the newly upgraded license, the Encryption-3DES-AES is disabled whereas previously it was enabled.
 
ASA 5512-K9
Version 8.6(1)2

View 2 Replies View Related

Cisco Firewall :: 6500 - Upgrade Context License

May 3, 2011

I have a firewall module in a Switch Catalyst 6500. I wan to  upgrade its context capacity to a greater capacity. When I looked it in the Dynamic configuration, it send me following number parts:
 
FR-SVC-FWM-VC-T1=
FR-SVC-FWM-UPGR1=
 
The first one is the license to have 20 context and the next one is upgrade from 20 context to 50 context. My problem is that I haven't could find a service support contract associate them.I want to know if they have or not service contract, because I can´t find them.

View 1 Replies View Related

Cisco Firewall :: Do Need Security Plus License To Do HA With Two 5520

Mar 7, 2011

Do I need the security plus license to do HA with two 5520's?I was told by our purchasing department that the 5520 was supposed to be able to do HA out of the box, but when I look I see only the VPN + license.  Does that mean I can download the security plus license?  Or do I even need it on the 5520.

View 2 Replies View Related

Cisco Firewall :: Security Plus License For ASA5505

Jul 2, 2012

I have Cisco ASA5505 8.2(5) connected with Cisco 5520 8.2(1) via IPSEC tunnel, I was able to SSH from the inside 5520 to inside IP of the asa5505. but I after I upgrade the license to security plus at 5505 I lost the SSH and ASDM to inside IP of 5505 from the inside network of the 5520. however I still can use SSH and ASDM on outside IP of 5505.
 
I did a lot of testing to make it work but I couldn't I added SSH 0.0.0.0/0 inside and outside also I added acl on both interfaces. when I did a trace on the outside interface from the private network of 5520 to 5505 inside IP I got IPSEC spoofed by the way that trace only works with security plus because I try to test on all my other firewalls 8.2(5) it shows nothing and all my firewalls can accessed from the private network 5520 except the one with the security plus!

View 11 Replies View Related

Cisco Firewall :: ASA 5505 - 3 DES License

May 20, 2013

I'm new to ASA and bought a used one from ebay but I cannot connect to the ASDM - I get an error in all the browsers.
 
Cannot communicate securely with peer: no common encryption algorithm(s).
 
(Error code: ssl_error_no_cypher_overlap)
 
Having browsed the support forums and Google - it seems I need the 3DES license. I have obtained an activation key from Cisco and applied it to my ASA 5505 however I get a warning about the device is licensed for a higher software level. the license on the ASA is Security plus. When I apply the activation key from Cisco most of the features are disabled.

[Code] ......

View 4 Replies View Related

Cisco Firewall :: Security Context License On 5550

Dec 9, 2012

 I need your support for upgrading the Security context license on 5550, at present we have 5 Security context license installed in ASA but we want it to increased till 10 conctexts. I want to understand if we need to get addtional 5 Security context license or 10.     

View 5 Replies View Related

Cisco Firewall :: ASA 5510 - Difference Between CSC-10-PLUS And Security Plus License

Mar 3, 2011

I have ASA 5510. Is there any difference between CSC-10-PLUS license and Security Plus License...

View 3 Replies View Related

Cisco Firewall :: ASA 5505 Activation License?

Oct 12, 2011

I've purchased a used ASA 5505 device.  Upon reseting and looking at the startup, I see that it is unable to retrieve Activation License and used default.  Activation License shows as all zeros.
 
Is there a way to find whatever Activation License is tied to my device from Cisco without a service contract ?  or I have to live with the default ?

View 5 Replies View Related

Cisco Firewall :: ASA 5505 - SSL WebVPN License

Dec 27, 2012

I am planning to setup Clientless Web VPN on our ASA 5505 for secure access to a internal web resource from outside. When I checked the licensing details on the ASA using #sh ver I could notice thar Web VPN peers allowed is only 2 Does this mean that only two clientless simoultaneous connections are possible ?
 
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs                       : 3, DMZ Restricted

[Code]....

View 5 Replies View Related

Cisco Firewall :: Upgrading ASA 5505 License

Oct 8, 2012

One of our clients has recently purchased upgrade licenses for their cisco asa as follows

L-ASA5505-10-50=
and
L-ASA5505-SEC-PL=

after retrieving the activation key from the cisco website we tried entering the activation key to the asa both via ASDM and telnet when entering the command on telnet the shell becomes unresponsive when entering the command on ASDM we receive a "success" message followed by a request to restart ASDM and save the configuration after a minute or so i get an error screen saying "write mem" the asdm restarts and nothing changes.

View 4 Replies View Related

Cisco Firewall :: Is It Required For 3des License Upgrade For ASA 5510 To Reboot

Oct 1, 2012

Is it required for the 3des license upgrade for the asa5510 to reboot for the further configuration of site2site tunnels.

View 1 Replies View Related

Cisco Firewall :: Security Context License Requirement - ASA5520

Jan 14, 2013

A simple question - I have ASA 5520s and was wondering what license is required to create multiple (more than default 2) security contexts.

The ASA already have ASA 5520 VPN Plus license.
 
Software Version 8.4(1)

View 2 Replies View Related

Cisco Firewall :: ASA 5510 With Security Plus License Lost Contexts

Jan 28, 2013

I have a ASA 5510 with Security Plus License and when I looked at the devices a few days ago I had 2 contexts, however after configuring the Mgm port as a regular port the contexts show 0, why?  I can not find any post on the internet where this issue has happen:  here is the output from show ver:

Cisco Adaptive Security Appliance Software Version 7.0(8)
Compiled on Sat 31-May-08 23:48 by builders
System image file is "disk0:/asa708-k8.bin"

[Code]......

View 3 Replies View Related

Cisco Firewall :: ASA 5505 With Base License That Uses 3 VLAN

Jul 17, 2012

I am working on ASA 5505 with Base License that uses 3 VLAN's.
 
-My VLAN 1 is for used for my home network.
-VLAN 2 is connected to the public Internet and my IP gets assigned by ISP dynamically.
-VLAN 3 is DMZ where I will have few VM's that would need access to and from the Internet.
 
I am looking to work with following:

1) 172.16.0.2 that sits on DMZ will need to access public Internet over port 80
2) Permit access from the Internet over port 3389 to 172.16.0.2
3) Permit any host on private VLAN (192.168.0.0 network) to access 172.16.0.2 over the port 3389
4) Permit second VM on the DMZ VLAN let say 172.16.0.3 to access public Internet on all ports. Access in to this host is not permitted.
5) For some reason DHCP hosts are NOT getting DNS (8.8.8.8) entry when IP hets assigned or renew. I have a statements below but it is not working.
 
Also, if ACL rules for VoIP are written correctly. The goal is to permit these ports (SIP related) to access VoIP router. [code]

View 1 Replies View Related

Cisco Firewall :: Adding A DMZ On ASA 5505 With Base License

Dec 28, 2011

I'm tring to setup a DMZ for a guest wireless off of a 5505. So this device has a base license.  It has vlan1 and vlan 2 for inside and outside.Another vlan is configured to be a failover for the currently active wan connection.  It is using the "no forward interface" command.Can I add another vlan as a DMZ if I use the "no forward interface" command? [code]

View 6 Replies View Related

Cisco Firewall :: Configuring ASA 5505 With Base License

May 11, 2011

I have ASA 5505 with base licence. I configured NATing and VPN(site to site). All are working fine.My ASA is base license so i created 2 VLANS, one is inside and outside.Inside i am using 10.91.40.0/24 serie IP addresses.Below are the new requirements that i need to configre:
 
1. First 30 IP addresses only needs internet directly.( Servers and Management)

2. If remaining IPs likes to use web then traffic needs to forward one proxy server( where he gives user authentiation)

View 2 Replies View Related

Cisco Firewall :: ASA 5505 - Retrieve Original License?

Feb 14, 2012

I recently purchased a used Cisco ASA 5505 and I accidentally (and very stupidly) erased the flash without backing up my license.I have generated a demo licence from the Cisco licencing site, so I have basic functionality. However, the email that I received informed me that there is a higher licence already stored for my device.My question is, is there a way to get that licence back if I can provide the serial number / any other identification to prove I now own the ASA?

View 2 Replies View Related

Cisco Firewall :: ASA 5505 - DMZ Configuration With Base License

May 24, 2011

My ASA 5505 base license allows for three VLANs, the third one can only initiate traffic to one other VLAN (as specified by no forward interface vlan <number> on the third VLAN). This doesn't mean it can't "access" the other VLAN, it just can't initiate traffic to it. A lot of people get that wrong.Let's say you've got three VLANs, one is OUTSIDE, two is DMZ, and three is INSIDE. On the second VLAN would I enter the no forward interface as vlan 3, then set the name via the nameif command and everything will work just fine. The DMZ will not be able to initiate traffic to the INSIDE, but will to the outside, and assuming you have your ACLs and NAT set up properly, it will be able to respond to traffic from the INSIDE.
 
Would that be best practice or would I enter the "no forward" interface as in VLAN 1, thus is being able to respond to traffic from the outside as opposed to the inside.
 
I had a DMZ set up but since there was an intrusion into my network, I am building it again.

View 2 Replies View Related

Cisco Firewall :: 5505 Remote VPN And Backup ISP License

Oct 29, 2012

I have 5505 license with default 10 user license, want to increment the remote vpn user to 50 user license;will it be on yearly basis.Another question, can we purchase security plus license for configuring the failover config ,as well support the 50 user license on the same..

View 3 Replies View Related

Cisco Firewall :: ASA5510 Security Context License Transfer To Another Device

Apr 30, 2012

Is it possivble to have 10 security licenses, license to a Cisco 5510 and have them transfeered to a Cisco5520?    

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved