Cisco Firewall :: ASA 5510 With Security Plus License Lost Contexts

Jan 28, 2013

I have a ASA 5510 with Security Plus License and when I looked at the devices a few days ago I had 2 contexts, however after configuring the Mgm port as a regular port the contexts show 0, why?  I can not find any post on the internet where this issue has happen:  here is the output from show ver:

Cisco Adaptive Security Appliance Software Version 7.0(8)
Compiled on Sat 31-May-08 23:48 by builders
System image file is "disk0:/asa708-k8.bin"

[Code]......

View 3 Replies


ADVERTISEMENT

Cisco Firewall :: ASA 5510 - Difference Between CSC-10-PLUS And Security Plus License

Mar 3, 2011

I have ASA 5510. Is there any difference between CSC-10-PLUS license and Security Plus License...

View 3 Replies View Related

Cisco Firewall :: Update License Content Security And Control Info ASA 5510

Mar 20, 2013

I have to upgrade to an ASA 5510 CSC, and the new license is generated, the file you sent me licensing, only seen this:Activation Code not required for this renewal. Please go to "Administration> Product License" in the CSC SSM console and click "Check Status Online" to get the latest expiration date (BASE: 09/04/2014, PLUS: 09/04/2014).This means that what I have not make any upgrades or license charge in the ASA? Does the automatic update is made?

View 1 Replies View Related

Cisco Firewall :: Connection Failure In ASA 5520 Security Contexts

Mar 27, 2011

Ive got a virtualised firewall running 3 security contexts in routed mode. What am experiencing is that i cannot connect to an OUTSIDE host through the security contexts. From the firewall itself i cannot ping the directly attached host on the OUTSIDE interface but i can ping the directly attached host on the INSIDE interface. When i reload the firewall box, the first ping to the OUTSIDE host would be successful but subsequent pings fail and thus total connectivity is lost.
 
I even tried upgrading to ASA version 8.4(1) but still the same.

View 5 Replies View Related

Cisco Firewall :: ASA 5585 Number Of Licenses Used By Multiple Security Contexts

Feb 5, 2012

We are going to deploy a active/active setup of 2 ASA 5585's. Here we will implement a concept of security zones through context's where different services will be firewall through a separate firewall context. will a security context consume 1 or 2 licenses because we are running in a Active/active setup?  Right now I got completely confused when my manager asked me that question.I would say that we only use on security context license - but since we are running in a active/active setup - even though the other instance is standby - will it consume a context license? We are using ASA OS 8.4.x.

View 5 Replies View Related

Cisco Firewall :: Difference Of VPN Plus License And Security Plus License ASA 5520

Oct 16, 2012

What's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.

View 1 Replies View Related

Cisco Firewall :: 5515-X Management Access To Transparent Multi-mode Security Contexts

Jan 23, 2013

I have setup a 5515-X in transparent multi-mode and setup 5 security contexts with inside and outside ports, one admin and 4 others. The problem I have run into is setting up a management IP for each context. On one of my other transparent firewalls in production we were able to apply an IP to the security context (not interface) however the new firewall is running the latest software and this same functionality is not available. The only options for IP in context mode is IP AUDIT. So my next plan was to create sub-interfaces of the management interface and assign one to each context however the 5515-x does not allow sub-interfaces on the management interface. How I setup a management IP on each context?
 
Another interesting thing i read is that the managment IP assigned to a context  (if i could figure out how to set it up), has to be in the same subnet as the data interface which if fine but it also says that the management interface should not be connected to the same switch as the data interface because of MAC address table update issues, meaning that i could not use a sub-interface of one of the already configured context ports.

View 3 Replies View Related

Cisco VPN :: ASA 5510 - Security Plus License

Aug 21, 2012

We’ve ordered ASA 5510 with security plus license as below description: 

ASA5510-K8
ASA 5510 Appliance with SW,   5FE, DES
L-ASA5510-SEC-PL=
ASA 5510 Security Plus License   w/ HA, GE, more VLANs + conns
 
The license details on the appliance shows as the below,
Fail over                        : Enabled 
Encryption-DES                  : Enabled 
Encryption-3DES-AES             : Disabled
Security Contexts                : Default 
GTP/GPRS                        : Disabled
Any Connect Premium Peers      : Default 
Other VPN Peers                 : Default 
Advanced Endpoint Assessment    : Disabled
Any Connect for Mobile            : Disabled
Any Connect for Cisco VPN Phone  : Disabled
Shared License                  : Disabled
UC Phone Proxy Sessions          : Default 
Total UC Proxy Sessions          : Default 
Any Connect Essentials            : Disabled
Bot net Traffic Filter            : Disabled
Inter company Media Engine        : Disabled 
  
I’ve noticed that the 3DES is disabled, do I need to order another license to use 3DES or not ?Also, I need 2 ~ 5 branches to connect simultaneously and have VPN access on their laptops to the main branch via vpn software, which VPN software I should use and is our license enough or I should order another license.

View 3 Replies View Related

Cisco Firewall :: ASA5520 - Active / Active Failover In Multiple Security Contexts With Dual ISP?

Jun 1, 2011

I have an ASA5520 in location A with an ISP connection and a matching ASA5520 in location B with a separate ISP connection. We have fiber connecting the two locations and vlans passing back and forth so I will be able to configure the failover via a vlan as well as extend the ISP's to each location via vlans. The Active/Active configuration with the multiple security contexts does not seem to be an issue but how is a redundant ISP configured in this mode?We want to have context A using the ASA in location A with ISP1 as the primary and failing over to ISP 2 in locaiton B We also want to have context B using the ASA in location B with ISP 2 as the primary and failing over to ISP1 in location A Would route tracking provide the desired result? Is there a better option?

View 1 Replies View Related

Cisco Security :: Remove License Previously Installed On ASA 5510?

Nov 15, 2010

I'm currently reconfiguring an ASA5510 installation to a HA setup with a second 5510. The old 5510 has an "AnyConnect for Mobile" license which isn't being used. So we upgrade that one to a SecPlus License to enable failover posibilities and we bought a new 5510 also with a SecPlus license. When I'm trying to enable failover I get the message that my mate hasn't got the "AnyConnect for Mobile" license. I know for failover both devices must be exactly the same (at first i thougth that the AnyConnect license would be lost when upgrading to SecPlus). So now I'm wondering and searching for solutions to remove the AnyConnect license (because we don't use it).

View 7 Replies View Related

Cisco Firewall :: Is ASA 5510 Firewall Required Any Subscription Or License

Nov 15, 2012

I am quite new to firewall, in my company one asa 5510 firewall is there.I configured inside, outside, dns, dhcp and nating.I need to config bandwidth limit (1Mbps) for inside port and I restruct like facebook, youtube and pornsites..And I heard that some subscription is required, really is it required?

View 1 Replies View Related

Cisco Firewall :: Do Need Security Plus License To Do HA With Two 5520

Mar 7, 2011

Do I need the security plus license to do HA with two 5520's?I was told by our purchasing department that the 5520 was supposed to be able to do HA out of the box, but when I look I see only the VPN + license.  Does that mean I can download the security plus license?  Or do I even need it on the 5520.

View 2 Replies View Related

Cisco Firewall :: Security Plus License For ASA5505

Jul 2, 2012

I have Cisco ASA5505 8.2(5) connected with Cisco 5520 8.2(1) via IPSEC tunnel, I was able to SSH from the inside 5520 to inside IP of the asa5505. but I after I upgrade the license to security plus at 5505 I lost the SSH and ASDM to inside IP of 5505 from the inside network of the 5520. however I still can use SSH and ASDM on outside IP of 5505.
 
I did a lot of testing to make it work but I couldn't I added SSH 0.0.0.0/0 inside and outside also I added acl on both interfaces. when I did a trace on the outside interface from the private network of 5520 to 5505 inside IP I got IPSEC spoofed by the way that trace only works with security plus because I try to test on all my other firewalls 8.2(5) it shows nothing and all my firewalls can accessed from the private network 5520 except the one with the security plus!

View 11 Replies View Related

Cisco Firewall :: ASA 5505 Security Plus License Upgrade?

Apr 19, 2012

We want to upgrade one of our Cisco 5505 with Security Plus license. what is the difference between L-ASA5505-SEC-PL and ASA5505-SEC-PL upgrade licenses?

View 1 Replies View Related

Cisco Firewall :: Security Context License On 5550

Dec 9, 2012

 I need your support for upgrading the Security context license on 5550, at present we have 5 Security context license installed in ASA but we want it to increased till 10 conctexts. I want to understand if we need to get addtional 5 Security context license or 10.     

View 5 Replies View Related

Cisco Firewall :: Upgrade License On ASA 5510?

Oct 12, 2011

I have a two ASA HA and I'd like to upgrade the license to ASA5500-SSL-250. I need to know if i have to purchase one license (ASA5500-SSL-250) for the Active unit and one license  (ASA5500-SSL-250) for the standby unit.

View 3 Replies View Related

Cisco Firewall :: 5510 CSC Base License

Jan 27, 2013

We have purchased an ASA 5510 with CSC module. Unfortunatelly, white envelope with PAK for activation a Base License was lost before we managed to register it.

View 1 Replies View Related

Cisco Firewall :: ASA 5510 And License With AIP-SSM Connection

Oct 29, 2012

I have this box. I have few questions about it.
 
1)     Will I be able to update firmware (from 8.2 to 8.3 or higher for example) without smarnet for ASA 5510? And what can not I do without smartnet?
2)     I have only AIP-SSM-10 module to this asa 5510. is there a smartnet for it, too? And when I buy only module is there build in a 1 year subscription for  IPS signatures?
3)     If I have Cisco ASA 5510 base license, will my IPS on AIP-SSM-10 work?
4)     Also I'm planning in a year buy one more 5510 with same module and put ther in failover. Will I really need Security Plus license for failover (Active/Standby)? For Active/Active I know that I need one, yes?

View 5 Replies View Related

Cisco Firewall :: ASA 5510 - CSC 10 License Renewing

Apr 2, 2011

I have a problem with ASA5510 CSC10 license renewing. Initially, we had CSC license  with 500 seats, and renewed it to 250 seats. After that every time it shows that license expires day before today.(for example if today is 4 April it show that license expires on 3 April).

Clicking on "Check Status Online" didn't work. What can correct this problem ?

View 1 Replies View Related

Cisco Firewall :: ASA 5510 - License For Failover

Apr 19, 2011

I am looking for redundant asa deployment for fail over set up . however both units have csc cards. does  this product  ASA5510-CSC10-K9 has license for fail over ? what's the part no for asa failover license ?

View 2 Replies View Related

Cisco Firewall :: Security Context License Requirement - ASA5520

Jan 14, 2013

A simple question - I have ASA 5520s and was wondering what license is required to create multiple (more than default 2) security contexts.

The ASA already have ASA 5520 VPN Plus license.
 
Software Version 8.4(1)

View 2 Replies View Related

Cisco Firewall :: Adding Second Subnet On ASA 5505 With Security Plus License

Jan 31, 2012

We recently upgraded a ASA 5505 with the security plus license to allow us to add a second subnet, but are having a few problems configuring the second subnet.  The original subnet we have configured 10.1.1.0 is able to access the internet without any problems.  However the new subnet 10.1.5.0 is unable to access the internet and when we ran a trace packet the nat config nat (inside) 1 0.0.0.0 0.0.0.0 is showing as the rule that drops the packet.
 
Additionally we have not been able to get the 2 subnets to talk to each other even though same-security-traffic permit inter-interface is configured.  How to configure the subnet 10.1.5.0 to access the internet or to get the subnets to communicate.  Below is a streamlined version of our current config.

!interface Vlan1nameif insidesecurity-level 100ip address 10.1.1.1 255.255.255.0 ospf cost 10!interface Vlan2nameif outsidesecurity-level 0ip address 66.66.66.66 255.255.255.240 ospf cost 10!interface Vlan13nameif corporatesecurity-level 100ip

[Code].....

View 15 Replies View Related

Cisco Firewall :: ASA 5505 Security License And Vlans Supported?

May 18, 2013

I am buying ASA 5505 with security  license. It says it can support 20 vlans does it support 20 vlans by allowing to create subinterfaces? As it has 8 physical ports only?

View 3 Replies View Related

Cisco Firewall :: 5510 - Which License Needed For ISP Failover

Mar 3, 2011

I Have ASA 5510. And I had two ISPs and I need to configure ISP failover. So which license i need? I Had License ASA-CSC10-PLUS License.

View 1 Replies View Related

Cisco Firewall :: ASA5510 Security Context License Transfer To Another Device

Apr 30, 2012

Is it possivble to have 10 security licenses, license to a Cisco 5510 and have them transfeered to a Cisco5520?    

View 1 Replies View Related

Cisco Firewall :: ASA 5510 No 3des Free License Installed

Sep 12, 2012

I have Asa 5510 with base license and no 3des free license installed on to it.Will it be required for both the licenses to be installed on it for site to site tunnels to establish.This firewall is not taking the below commands to give and the tunnel is not getting through.tunnel-group x.x.x.x type ipsec-l2ltunnel-group x.x.x.x ipsec-attributes.

View 3 Replies View Related

Cisco Firewall :: ASA 5510 Switch Failover License From Old To New Device

Nov 1, 2011

I used to have this situation where I need to replace faulty ASA5510 (this FW did not failover to standby FW) with the new one.
 
But the problem is the new ASA5510 came with Base License only not with Security Plus License which is needed to allow this brand new device to be configure failover.
 
how do I pull out Security Plus License from old FW and switch it to new FW (Base License) and activate to Security Plus License.

View 5 Replies View Related

Cisco Firewall :: ASA 5510 - Part Number For CSC-SSM With Premium Plus License?

Jul 3, 2011

 I would like to order module card CSC-SSM with premium plus license but i don't know which part number with have : Plus license: Adds anti-spam, anti-phishing, URL blocking/filtering and content control
 
i saw part number  ASA5510-CSC10-K9 but it standard license and it dont'have adds anti-spam, anti-phishing, URL Blocking/frltering and content.
 
Note;i use ASA 5510.

View 1 Replies View Related

Cisco Firewall :: Is It Required For 3des License Upgrade For ASA 5510 To Reboot

Oct 1, 2012

Is it required for the 3des license upgrade for the asa5510 to reboot for the further configuration of site2site tunnels.

View 1 Replies View Related

Cisco Firewall :: ASA 8.3 Routing Between Contexts

Feb 21, 2011

Is it possible to route among contexts (I have 5 contexts) in the ASA without sending traffic to a fusion router (external router) to be routed.  I am running ASA 8.3.

View 2 Replies View Related

Cisco Firewall :: 5520 As ISP Causes VPN To Be Disabled When Using Contexts

Jan 31, 2012

In the latest code, is VPN still disabled when using contexts? If you use a 5520 as an ISP based firewall for customers, then what would be used for VPN access?  Also how many contexts does a 5520 support, and would putting 2 interfaces into an etherchannel for inside, and 2 for outside work?  Reason I ask about that, the inside and outside would connect to 2 different core routers.  I would be for an MPLS setup.

View 5 Replies View Related

Cisco Firewall :: ASA 5515X Max Contexts In HA Mode

Jun 4, 2013

What is the maximum number of contexts a pair of 5515Xs in HA mode can support?
 
I know each 5515X can have a max of 5 contexts, but does that mean in HA mode a pair can support 10 with license pooling? 

View 8 Replies View Related

Cisco Firewall :: Getting ASA 5540 Default Contexts?

Apr 19, 2011

Q1. I would like to confirm like how many total of contexts do I have by default when I purchase the ASA 5540 ? are they two contexts aside from the admin context or two contexts including the admin context?
 
Q2. can I configure the default box with High Availability using the default contexts?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved