Cisco Firewall :: ASA 5510 - Difference Between CSC-10-PLUS And Security Plus License
Mar 3, 2011I have ASA 5510. Is there any difference between CSC-10-PLUS license and Security Plus License...
View 3 Replies
ADVERTISEMENT
Cisco Firewall :: Difference Of VPN Plus License And Security Plus License ASA 5520
Oct 16, 2012What's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.
View 1 Replies View RelatedCisco Firewall :: ASA 5510 With Security Plus License Lost Contexts
Jan 28, 2013I have a ASA 5510 with Security Plus License and when I looked at the devices a few days ago I had 2 contexts, however after configuring the Mgm port as a regular port the contexts show 0, why? I can not find any post on the internet where this issue has happen: here is the output from show ver:
Cisco Adaptive Security Appliance Software Version 7.0(8)
Compiled on Sat 31-May-08 23:48 by builders
System image file is "disk0:/asa708-k8.bin"
[Code]......
Cisco Firewall :: Update License Content Security And Control Info ASA 5510
Mar 20, 2013I have to upgrade to an ASA 5510 CSC, and the new license is generated, the file you sent me licensing, only seen this:Activation Code not required for this renewal. Please go to "Administration> Product License" in the CSC SSM console and click "Check Status Online" to get the latest expiration date (BASE: 09/04/2014, PLUS: 09/04/2014).This means that what I have not make any upgrades or license charge in the ASA? Does the automatic update is made?
View 1 Replies View RelatedCisco VPN :: ASA 5510 - Security Plus License
Aug 21, 2012We’ve ordered ASA 5510 with security plus license as below description:
ASA5510-K8
ASA 5510 Appliance with SW, 5FE, DES
L-ASA5510-SEC-PL=
ASA 5510 Security Plus License w/ HA, GE, more VLANs + conns
The license details on the appliance shows as the below,
Fail over : Enabled
Encryption-DES : Enabled
Encryption-3DES-AES : Disabled
Security Contexts : Default
GTP/GPRS : Disabled
Any Connect Premium Peers : Default
Other VPN Peers : Default
Advanced Endpoint Assessment : Disabled
Any Connect for Mobile : Disabled
Any Connect for Cisco VPN Phone : Disabled
Shared License : Disabled
UC Phone Proxy Sessions : Default
Total UC Proxy Sessions : Default
Any Connect Essentials : Disabled
Bot net Traffic Filter : Disabled
Inter company Media Engine : Disabled
I’ve noticed that the 3DES is disabled, do I need to order another license to use 3DES or not ?Also, I need 2 ~ 5 branches to connect simultaneously and have VPN access on their laptops to the main branch via vpn software, which VPN software I should use and is our license enough or I should order another license.
Cisco Security :: Remove License Previously Installed On ASA 5510?
Nov 15, 2010I'm currently reconfiguring an ASA5510 installation to a HA setup with a second 5510. The old 5510 has an "AnyConnect for Mobile" license which isn't being used. So we upgrade that one to a SecPlus License to enable failover posibilities and we bought a new 5510 also with a SecPlus license. When I'm trying to enable failover I get the message that my mate hasn't got the "AnyConnect for Mobile" license. I know for failover both devices must be exactly the same (at first i thougth that the AnyConnect license would be lost when upgrading to SecPlus). So now I'm wondering and searching for solutions to remove the AnyConnect license (because we don't use it).
View 7 Replies View RelatedCisco Firewall :: Is ASA 5510 Firewall Required Any Subscription Or License
Nov 15, 2012I am quite new to firewall, in my company one asa 5510 firewall is there.I configured inside, outside, dns, dhcp and nating.I need to config bandwidth limit (1Mbps) for inside port and I restruct like facebook, youtube and pornsites..And I heard that some subscription is required, really is it required?
View 1 Replies View RelatedCisco Firewall :: Do Need Security Plus License To Do HA With Two 5520
Mar 7, 2011Do I need the security plus license to do HA with two 5520's?I was told by our purchasing department that the 5520 was supposed to be able to do HA out of the box, but when I look I see only the VPN + license. Does that mean I can download the security plus license? Or do I even need it on the 5520.
View 2 Replies View RelatedCisco Firewall :: Security Plus License For ASA5505
Jul 2, 2012I have Cisco ASA5505 8.2(5) connected with Cisco 5520 8.2(1) via IPSEC tunnel, I was able to SSH from the inside 5520 to inside IP of the asa5505. but I after I upgrade the license to security plus at 5505 I lost the SSH and ASDM to inside IP of 5505 from the inside network of the 5520. however I still can use SSH and ASDM on outside IP of 5505.
I did a lot of testing to make it work but I couldn't I added SSH 0.0.0.0/0 inside and outside also I added acl on both interfaces. when I did a trace on the outside interface from the private network of 5520 to 5505 inside IP I got IPSEC spoofed by the way that trace only works with security plus because I try to test on all my other firewalls 8.2(5) it shows nothing and all my firewalls can accessed from the private network 5520 except the one with the security plus!
Cisco Firewall :: ASA 5510 - Difference Between 8.4.3.ED And 8.4.3 Interim
May 31, 2012What is the difference between 8.4.3.ED and 8.4.3 interim? I need to upgrade my ASA 5510 from 8.4.3
View 5 Replies View RelatedCisco Firewall :: ASA 5505 Security Plus License Upgrade?
Apr 19, 2012We want to upgrade one of our Cisco 5505 with Security Plus license. what is the difference between L-ASA5505-SEC-PL and ASA5505-SEC-PL upgrade licenses?
View 1 Replies View RelatedCisco Firewall :: Security Context License On 5550
Dec 9, 2012I need your support for upgrading the Security context license on 5550, at present we have 5 Security context license installed in ASA but we want it to increased till 10 conctexts. I want to understand if we need to get addtional 5 Security context license or 10.
View 5 Replies View RelatedCisco Firewall :: Upgrade License On ASA 5510?
Oct 12, 2011I have a two ASA HA and I'd like to upgrade the license to ASA5500-SSL-250. I need to know if i have to purchase one license (ASA5500-SSL-250) for the Active unit and one license (ASA5500-SSL-250) for the standby unit.
View 3 Replies View RelatedCisco Firewall :: 5510 CSC Base License
Jan 27, 2013We have purchased an ASA 5510 with CSC module. Unfortunatelly, white envelope with PAK for activation a Base License was lost before we managed to register it.
View 1 Replies View RelatedCisco Firewall :: ASA 5510 And License With AIP-SSM Connection
Oct 29, 2012I have this box. I have few questions about it.
1) Will I be able to update firmware (from 8.2 to 8.3 or higher for example) without smarnet for ASA 5510? And what can not I do without smartnet?
2) I have only AIP-SSM-10 module to this asa 5510. is there a smartnet for it, too? And when I buy only module is there build in a 1 year subscription for IPS signatures?
3) If I have Cisco ASA 5510 base license, will my IPS on AIP-SSM-10 work?
4) Also I'm planning in a year buy one more 5510 with same module and put ther in failover. Will I really need Security Plus license for failover (Active/Standby)? For Active/Active I know that I need one, yes?
Cisco Firewall :: ASA 5510 - CSC 10 License Renewing
Apr 2, 2011I have a problem with ASA5510 CSC10 license renewing. Initially, we had CSC license with 500 seats, and renewed it to 250 seats. After that every time it shows that license expires day before today.(for example if today is 4 April it show that license expires on 3 April).
Clicking on "Check Status Online" didn't work. What can correct this problem ?
Cisco Firewall :: ASA 5510 - License For Failover
Apr 19, 2011I am looking for redundant asa deployment for fail over set up . however both units have csc cards. does this product ASA5510-CSC10-K9 has license for fail over ? what's the part no for asa failover license ?
View 2 Replies View RelatedCisco Firewall :: Security Context License Requirement - ASA5520
Jan 14, 2013A simple question - I have ASA 5520s and was wondering what license is required to create multiple (more than default 2) security contexts.
The ASA already have ASA 5520 VPN Plus license.
Software Version 8.4(1)
Cisco Firewall :: Adding Second Subnet On ASA 5505 With Security Plus License
Jan 31, 2012We recently upgraded a ASA 5505 with the security plus license to allow us to add a second subnet, but are having a few problems configuring the second subnet. The original subnet we have configured 10.1.1.0 is able to access the internet without any problems. However the new subnet 10.1.5.0 is unable to access the internet and when we ran a trace packet the nat config nat (inside) 1 0.0.0.0 0.0.0.0 is showing as the rule that drops the packet.
Additionally we have not been able to get the 2 subnets to talk to each other even though same-security-traffic permit inter-interface is configured. How to configure the subnet 10.1.5.0 to access the internet or to get the subnets to communicate. Below is a streamlined version of our current config.
!interface Vlan1nameif insidesecurity-level 100ip address 10.1.1.1 255.255.255.0 ospf cost 10!interface Vlan2nameif outsidesecurity-level 0ip address 66.66.66.66 255.255.255.240 ospf cost 10!interface Vlan13nameif corporatesecurity-level 100ip
[Code].....
Cisco Firewall :: ASA 5505 Security License And Vlans Supported?
May 18, 2013I am buying ASA 5505 with security license. It says it can support 20 vlans does it support 20 vlans by allowing to create subinterfaces? As it has 8 physical ports only?
View 3 Replies View RelatedCisco Firewall :: 5510 - Which License Needed For ISP Failover
Mar 3, 2011I Have ASA 5510. And I had two ISPs and I need to configure ISP failover. So which license i need? I Had License ASA-CSC10-PLUS License.
View 1 Replies View RelatedCisco Firewall :: ASA5510 Security Context License Transfer To Another Device
Apr 30, 2012Is it possivble to have 10 security licenses, license to a Cisco 5510 and have them transfeered to a Cisco5520?
View 1 Replies View RelatedCisco Firewall :: ASA 5510 No 3des Free License Installed
Sep 12, 2012I have Asa 5510 with base license and no 3des free license installed on to it.Will it be required for both the licenses to be installed on it for site to site tunnels to establish.This firewall is not taking the below commands to give and the tunnel is not getting through.tunnel-group x.x.x.x type ipsec-l2ltunnel-group x.x.x.x ipsec-attributes.
View 3 Replies View RelatedCisco Firewall :: ASA 5510 Switch Failover License From Old To New Device
Nov 1, 2011I used to have this situation where I need to replace faulty ASA5510 (this FW did not failover to standby FW) with the new one.
But the problem is the new ASA5510 came with Base License only not with Security Plus License which is needed to allow this brand new device to be configure failover.
how do I pull out Security Plus License from old FW and switch it to new FW (Base License) and activate to Security Plus License.
Cisco Firewall :: ASA 5510 - Part Number For CSC-SSM With Premium Plus License?
Jul 3, 2011 I would like to order module card CSC-SSM with premium plus license but i don't know which part number with have : Plus license: Adds anti-spam, anti-phishing, URL blocking/filtering and content control
i saw part number ASA5510-CSC10-K9 but it standard license and it dont'have adds anti-spam, anti-phishing, URL Blocking/frltering and content.
Note;i use ASA 5510.
Cisco Firewall :: Is It Required For 3des License Upgrade For ASA 5510 To Reboot
Oct 1, 2012Is it required for the 3des license upgrade for the asa5510 to reboot for the further configuration of site2site tunnels.
View 1 Replies View RelatedSecurity / Firewalls :: Using NAT With Cisco ASA 5510 Firewall?
Mar 25, 2011I was under the impression that those global addresses that we used with NAT were from the outside IP addresses range?Lets say my outside IP address is idk 192.112.40.11 /30 and I only had two usable IPs (since you can't use network and broadcast IPs) so how would I set up NAT for a couple of Inside addresses with a shorting of addresses like this? Idk if that makes sense what I'm trying to say
View 3 Replies View RelatedCisco Security :: Cannot Login To Firewall ASA 5510
Sep 1, 2012i have in my network firewall ASA 5510 but the problem i cannot login to my firewall thru telnet or ssh even ASDM or bowser this is my configuration :
ASA Version 8.2(5)
!
hostname Amco-ASA
[Code].....
Cisco Firewall :: ASA 5510 Security For One Specific User
Jan 18, 2013We have an ASA 5510 version 8.3 (2) that we accept VPN users via a radius server. Is there a way to lock down a specific user that connects to the ASA as a SSL client or IPSEC VPN user? If the specific user were to connect to the ASA, we would want the user to have minimal to not access to our system.
View 1 Replies View RelatedCisco Firewall :: ASA 5510 - Bandwidth Management And Content Security
Sep 13, 2012I have some clarifications regarding ASA firewall, it can be support bandwidth management and content security at the same time. we are looking for below features in ASA5510.
IP/Policy based bandwidth management.Controll the bandwidth and allocate the bandwidth to specified users or servers.Content Security. If not, which device I need to set for Internet Bandwidth Management and content security.
Cisco Firewall :: 5510 Recommended Port-security Settings For ASA HA Failover
Dec 28, 2011I have a pair of ASA 5510s configured in active/standby mode. I have already configured the fail over settings on the firewalls. Both firewalls are connected to a 2960G. I made a change to the interfaces on the 2960 to allow 2 mac addresses on each port. [code]
Upon testing failover via the failover active command, I get port-security errors on the outside interface for each device:%PORT_SECURITY-2- PSECURE_ VIOLATION: Security violation occurred, caused by MAC address aaaa.bbbb.cccc on port GigabitEthernet0/8. After a few minutes, the error goes away and I can then connect to each firewall. It seems that it still waits for the aging time to expire before allowing the other MAC address. Shouldn't the "maximum 2" setting allow for both mac addresses?
I'd rather not have to hardcode the firewall's MAC addresses on each switchport because I could see this causing problems for us down the road. Is there anything else that can be done?
Cisco Firewall :: 5510 Security Plus To Terminate Client VPN Access For External Support Team
Aug 7, 2012I have a customer that wants to purchase an ASA 5510 security plus to terminate client VPN access for an external support team. The customer claims to want URL content filtering/proxy which leads me to suggest a CSC SSM 20 plus module. But upon further conversation, he mentioned wanting IPS. In this case, the customer does not seem to know the difference between the URL content filter/proxy and the IPS and uses both terms interchangably.
1. What would you suggest in your expert opinion would be the best module to get for this customer? IPS or CSC
2. If I go with the CSC module, where can I find good documentation on how to configure it and get it up to date?
3. does the CSC module provide any web proxy functionality?
Cisco :: Difference Between Transform Set And Security Association
Apr 22, 2012Whats the difference between a transform set and a security association? I understand that in the transform set you have to state AH or ESP, but why do you also have to choose a HMAC and an ecryption algorithm? Didnt we just configure that with isakmp? Also what is the point in selecting an encryption algorithm in isakmp if were using AH?
View 3 Replies View Related