Cisco Firewall :: ASA 5505 - SSL WebVPN License
Dec 27, 2012
I am planning to setup Clientless Web VPN on our ASA 5505 for secure access to a internal web resource from outside. When I checked the licensing details on the ASA using #sh ver I could notice thar Web VPN peers allowed is only 2 Does this mean that only two clientless simoultaneous connections are possible ?
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 3, DMZ Restricted
[Code]....
View 5 Replies
ADVERTISEMENT
Mar 26, 2013
is it strange to have a valid license fro FL-WEBVPN10-K9 but not able to download the latest anyconnect for my router?
View 0 Replies
View Related
May 20, 2013
I'm new to ASA and bought a used one from ebay but I cannot connect to the ASDM - I get an error in all the browsers.
Cannot communicate securely with peer: no common encryption algorithm(s).
(Error code: ssl_error_no_cypher_overlap)
Having browsed the support forums and Google - it seems I need the 3DES license. I have obtained an activation key from Cisco and applied it to my ASA 5505 however I get a warning about the device is licensed for a higher software level. the license on the ASA is Security plus. When I apply the activation key from Cisco most of the features are disabled.
[Code] ......
View 4 Replies
View Related
Oct 12, 2011
I've purchased a used ASA 5505 device. Upon reseting and looking at the startup, I see that it is unable to retrieve Activation License and used default. Activation License shows as all zeros.
Is there a way to find whatever Activation License is tied to my device from Cisco without a service contract ? or I have to live with the default ?
View 5 Replies
View Related
Dec 17, 2012
I have a Cisco ASA 5505 device with basic (default) license, currently all my reirections, VPN's, VLAN's(3 Vlan's) etc are configured on the same and are working fine.Now i need to upgrade my basic license to "Security Plus" for some additional features, if i upgrade it directley is there any complications in present rules, below is my doubhts
1. if i upgrade, did it change any of my present configurations ?
2. is there any name change or property changes for VLAN's or VPN's
3. did it affect the firewall functions
4. If anything goes wrong, can i restore it in to my old state using my previous dump.
View 1 Replies
View Related
Oct 8, 2012
One of our clients has recently purchased upgrade licenses for their cisco asa as follows
L-ASA5505-10-50=
and
L-ASA5505-SEC-PL=
after retrieving the activation key from the cisco website we tried entering the activation key to the asa both via ASDM and telnet when entering the command on telnet the shell becomes unresponsive when entering the command on ASDM we receive a "success" message followed by a request to restart ASDM and save the configuration after a minute or so i get an error screen saying "write mem" the asdm restarts and nothing changes.
View 4 Replies
View Related
Jul 17, 2012
I am working on ASA 5505 with Base License that uses 3 VLAN's.
-My VLAN 1 is for used for my home network.
-VLAN 2 is connected to the public Internet and my IP gets assigned by ISP dynamically.
-VLAN 3 is DMZ where I will have few VM's that would need access to and from the Internet.
I am looking to work with following:
1) 172.16.0.2 that sits on DMZ will need to access public Internet over port 80
2) Permit access from the Internet over port 3389 to 172.16.0.2
3) Permit any host on private VLAN (192.168.0.0 network) to access 172.16.0.2 over the port 3389
4) Permit second VM on the DMZ VLAN let say 172.16.0.3 to access public Internet on all ports. Access in to this host is not permitted.
5) For some reason DHCP hosts are NOT getting DNS (8.8.8.8) entry when IP hets assigned or renew. I have a statements below but it is not working.
Also, if ACL rules for VoIP are written correctly. The goal is to permit these ports (SIP related) to access VoIP router. [code]
View 1 Replies
View Related
Apr 19, 2012
We want to upgrade one of our Cisco 5505 with Security Plus license. what is the difference between L-ASA5505-SEC-PL and ASA5505-SEC-PL upgrade licenses?
View 1 Replies
View Related
Dec 28, 2011
I'm tring to setup a DMZ for a guest wireless off of a 5505. So this device has a base license. It has vlan1 and vlan 2 for inside and outside.Another vlan is configured to be a failover for the currently active wan connection. It is using the "no forward interface" command.Can I add another vlan as a DMZ if I use the "no forward interface" command? [code]
View 6 Replies
View Related
May 11, 2011
I have ASA 5505 with base licence. I configured NATing and VPN(site to site). All are working fine.My ASA is base license so i created 2 VLANS, one is inside and outside.Inside i am using 10.91.40.0/24 serie IP addresses.Below are the new requirements that i need to configre:
1. First 30 IP addresses only needs internet directly.( Servers and Management)
2. If remaining IPs likes to use web then traffic needs to forward one proxy server( where he gives user authentiation)
View 2 Replies
View Related
Feb 14, 2012
I recently purchased a used Cisco ASA 5505 and I accidentally (and very stupidly) erased the flash without backing up my license.I have generated a demo licence from the Cisco licencing site, so I have basic functionality. However, the email that I received informed me that there is a higher licence already stored for my device.My question is, is there a way to get that licence back if I can provide the serial number / any other identification to prove I now own the ASA?
View 2 Replies
View Related
May 24, 2011
My ASA 5505 base license allows for three VLANs, the third one can only initiate traffic to one other VLAN (as specified by no forward interface vlan <number> on the third VLAN). This doesn't mean it can't "access" the other VLAN, it just can't initiate traffic to it. A lot of people get that wrong.Let's say you've got three VLANs, one is OUTSIDE, two is DMZ, and three is INSIDE. On the second VLAN would I enter the no forward interface as vlan 3, then set the name via the nameif command and everything will work just fine. The DMZ will not be able to initiate traffic to the INSIDE, but will to the outside, and assuming you have your ACLs and NAT set up properly, it will be able to respond to traffic from the INSIDE.
Would that be best practice or would I enter the "no forward" interface as in VLAN 1, thus is being able to respond to traffic from the outside as opposed to the inside.
I had a DMZ set up but since there was an intrusion into my network, I am building it again.
View 2 Replies
View Related
Oct 29, 2012
I have 5505 license with default 10 user license, want to increment the remote vpn user to 50 user license;will it be on yearly basis.Another question, can we purchase security plus license for configuring the failover config ,as well support the 50 user license on the same..
View 3 Replies
View Related
Sep 22, 2012
I have a couple of 5505's with base licenses. One of the two has a limited output when running the sho version command, as it has a restricted license. What license I would need to buy in order to bring it up to "normal" base license ?
View 1 Replies
View Related
Sep 1, 2011
Well, I tried using the cisco configuration for ASA 5505 for blocking P2P: url...but this configuration only is usefull with programs like Kazaa, so I try this configuration to block ARES but the problem is that ARES try to make downloads from different ports, ¿How do I block ARES if there are sereveral ports ?
View 1 Replies
View Related
Jan 31, 2012
We recently upgraded a ASA 5505 with the security plus license to allow us to add a second subnet, but are having a few problems configuring the second subnet. The original subnet we have configured 10.1.1.0 is able to access the internet without any problems. However the new subnet 10.1.5.0 is unable to access the internet and when we ran a trace packet the nat config nat (inside) 1 0.0.0.0 0.0.0.0 is showing as the rule that drops the packet.
Additionally we have not been able to get the 2 subnets to talk to each other even though same-security-traffic permit inter-interface is configured. How to configure the subnet 10.1.5.0 to access the internet or to get the subnets to communicate. Below is a streamlined version of our current config.
!interface Vlan1nameif insidesecurity-level 100ip address 10.1.1.1 255.255.255.0 ospf cost 10!interface Vlan2nameif outsidesecurity-level 0ip address 66.66.66.66 255.255.255.240 ospf cost 10!interface Vlan13nameif corporatesecurity-level 100ip
[Code].....
View 15 Replies
View Related
May 18, 2013
I am buying ASA 5505 with security license. It says it can support 20 vlans does it support 20 vlans by allowing to create subinterfaces? As it has 8 physical ports only?
View 3 Replies
View Related
Aug 3, 2009
I'm trying to activate the DMZ interface on a restricted license ASA 5505 but I get an error when I try to ADD the interface. The message says "With the current license device will only supports 2 fully functional interfaces. Third interface can be added,but the traffic from this interface to another interface need to be blocked. Please make appropriate selection in advanced tab." I gather that I have to define the limitation myself? The problem is that I can't access the advanced tab because of the error. Can I do something via CLI to get through? I'm using ASA 8.2 and ASDM 6.2.
View 4 Replies
View Related
Mar 29, 2012
I have a base 5505 and would like to get AnyConnect working. To do that, would I have to first purchase either an essentials or premium license and then purchase the AnyConnect Mobile license?
View 1 Replies
View Related
Feb 14, 2012
At the end of the day I simply need to upgrade the license on my ASA 5505 v7.2.4 (upgrade will come later as part of a larger project) to allow for >10 Inside Hosts. From what I've read there seems to be a 50 license upgrade out there. Can this be purchased directly? From whom? Will it only affect the Inside Hosts number and not affect any other licenses, configurations, etc. Just being overly cautious since this is way outside of my normal realm. Below is the current activation-key information....
Result of the command: "show activation-key"
Serial Number: xxxxxxxxxxxxxx
Running Activation Key: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 3, DMZ Restricted
Inside Hosts : 10
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
VPN Peers : 10
WebVPN Peers : 2
Dual ISPs : Disabled
VLAN Trunk Ports : 0
This platform has a Base license.
The flash activation key is the SAME as the running key.
View 2 Replies
View Related
Mar 14, 2011
I'm moving from a 5505 to a 5520 and moving to a different location. I have a certificate on the 5505 that I want to export to the 5520.Can I export that key/certificate and import to the new ASA? Is there a problem since its a different location with a different IP ? (Domain name is the same, I moved the name on the DNS also)Do a have to re-do the signing process with the CA ?
View 3 Replies
View Related
Jun 19, 2012
I have 2 ipsec tunnel active on ASA5505 (secplus license).I would like to activate sslvpn also. Is it possible or there are issues in keeping active both services?
View 3 Replies
View Related
Dec 5, 2012
I am having trouble accessing shares via client SSL VPN. I have an ASA 5505 running 8.4(4)1 The share is on on Ubuntu server 11.04 running Samba 3.5.8
This may not be strictly a Cisco issue and it seems to be an interoperbility issue between ASA and Samba. Or simply the smb.conf configuration.
I suspect the issue is down to the interpretation of Lanman on the ASA as I know the usernames and passwords work correctly when accesing the shares from other platforms (Windows Vista and Ubuntu desktop 12.04)
When monitoring the Samba logs I get the following errors: (amongst others)
ntlm_password_check: NT MD4 password check failed for user testuser
Storing account testuser with RID 1000
check_ntlm_password: sam authentication for user [testuser] FAILED with error
[Code].....
View 1 Replies
View Related
Oct 16, 2012
What's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.
View 1 Replies
View Related
Mar 13, 2012
How is it possible to use OWA / SSO with Webvpn? I'm already configure the bookmark as below
Configuration -> Remote Access VPN -> Clientless SSL VPN Access -> Portal -> Bookmarks -> Add/Edit your Bookmarks URL:
Advanced Options: Post
destination : URL : 0 username : <yourdomain>CSCO_WEBVPN_USERNAME password : CSCO_WEBVPN_PASSWORD SubmitCreds : Login trusted : 0
But it didn't work. The users are authenticated using LDAP.
View 2 Replies
View Related
Dec 6, 2011
I have cisco asa 5505 Base Line .. so i want to buy the license key to get more features . so what is the requirments and how i can buy .
View 1 Replies
View Related
Jun 12, 2011
when a user login into the Cisco ASA Firewall (v8.3.2) via WebVPN, and accesses the applications. This works fine. In fact, the user can also create bookmarks etc.The problem here is when this user signs off and another user signs in via WebVPN, on the same PC or even on a different PC, this new user can view the screen viewed by the previous user. Basically, even though certain users can view only certain applications, but in my case, not all the time, but most of the time, users logging into via WebVPN can view someone else's profile application.
I suspect this is due to cookies or cache but I'm not sure myself. What can I do to resolve the problem.Currently, this issue is being resolved via a lousy manner i.e. we go to the SMB location and we clear the .CSP file manually, which is not the correct way to address this issue.
View 1 Replies
View Related
Aug 11, 2011
My client is having a 5505 which supports 2 SSL peers as per now and we want an upgrade . I had a look into GPL and I was confused with two of the following part numbers . Which one should I go for as both of these look same for me and there is a huge difference in price .
ASA5500-SSL-10
ASA 5500 SSL VPN 10 Premium User License
ASA-AC-E-5505
AnyConnect Essentials VPN License - ASA 5505 (25 Users)
View 4 Replies
View Related
Nov 27, 2011
Hit my 10 license limit on my 5505 and am trying out how to clear the cache so my main machines can get online.
I connected some VMs to the internet so i could download updates and now im stuck.
View 10 Replies
View Related
Jun 11, 2012
We purchased an ASA 5505 (ASA5505-BUN-K9) and more recently purchased the license to upgrade it from 10 to 50 users (L-ASA5505-10-50). I would like to provide remote access to users via AnyConnect - specifically, AnyConnnect on Windows plus the iPhone/iPad and Android versions. My understanding is that I should purchase the Anyconnect Essentials (L-ASA-AC-E-5505) and Anyconnect Mobile (L-ASA-AC-M-5505) licenses. Is this correct? If I do this, how many simultaneous remote access VPN connections (via Anyconnect clients) will the ASA then support?
Further, we did not initially purchase Smartnet with this device, but I would like to do so to gain access to software updates. Is there a site or document where I can locate the SKU #'s for Smartnet contracts that would be appropriate with our device?
The output of "show version" is below:
Cisco Adaptive Security Appliance Software Version 8.3(1)
Device Manager Version 6.3(1)
Compiled on Thu 04-Mar-10 16:56 by builders
System image file is "disk0:/asa831-k8.bin"
Config file at boot was "startup-config"
[code]....
View 2 Replies
View Related
Mar 22, 2013
I have ASA 5505 (8.4)I set up SSL AnyConnect VPN. I am able to connect from PC and MAC desktop computers using AnyConnect client but when I try use mobile device I am receiving error.Do I need buy the L-ASA-AC-M-5505=license?I see in description Platform: WindowsMy question is would it work with Apple mobile devices (iPhone, iPad)?
View 1 Replies
View Related
May 21, 2012
Is this a good price *NEW* for this unit...325.00
NEW SEALED* Cisco ASA5505-BUN-K9 Firewall 10-User
I assume 10-user means this device comes with a 10 user VPN license? Is there anything else I should be looking for when purchasing an ASA? Mainly looking to use my NetGear WNDR3700 as just a WiFi AP and not my edge device.
View 19 Replies
View Related
Jul 13, 2012
basic step to blocking site on ASA 5505 version 8.2(1) base license using CLI
View 1 Replies
View Related
