ASA 5505 - 10 License Limit?
Nov 27, 2011Hit my 10 license limit on my 5505 and am trying out how to clear the cache so my main machines can get online.
I connected some VMs to the internet so i could download updates and now im stuck.
ADVERTISEMENT
Cisco WAN :: How To Buy License Of ASA 5505
Dec 6, 2011I have cisco asa 5505 Base Line .. so i want to buy the license key to get more features . so what is the requirments and how i can buy .
View 1 Replies View RelatedCisco :: Bandwidth Limit In ASA 5505?
Aug 18, 2011I am using ASA 5505 cisco firewall as a transparent firewall. I have assigned ethernet 0/0 as outside interface and ethernet0/1-7 as inside interface. There are 3 departments in office. So, i connected ethernet 0/1 to Dept A, ethernet 0/2 to Dept B and ethernet 0/3 to Dept C. Now, I want to limit bandwidth to each department, e.g, 1 Mbps download/upload to Dept A, 512 kbps download/upload to Dept B and 512 kbps download/upload to Dept C. So, how can i do this in ASA 5505.?
View 1 Replies View RelatedCisco VPN :: ASA 5505 IPSec SA Limit?
May 2, 2012I am trying to replace a 1751 IPSec VPN that connects a single LAN behind the 1751 to ~45 remote networks behind a single peer. There are a small number of workstations (~50) and low throughput (< 1MBps) across this VPN, the biggest trouble is the number of remote networks needed.
I have tried to connect an ASA5505 Security Plus in place of the 1751 and am able to get Phase 1 and Phase 2 up, except I don't get all of my ipsec sa's and can only pass traffic to some of the remote networks. Does the 25 IPSec limit apply to multiple sa's one one peer, I've only ever seen it spoken of as a 25 peer limit?
Cisco Firewall :: ASA 5505 - 3 DES License
May 20, 2013I'm new to ASA and bought a used one from ebay but I cannot connect to the ASDM - I get an error in all the browsers.
Cannot communicate securely with peer: no common encryption algorithm(s).
(Error code: ssl_error_no_cypher_overlap)
Having browsed the support forums and Google - it seems I need the 3DES license. I have obtained an activation key from Cisco and applied it to my ASA 5505 however I get a warning about the device is licensed for a higher software level. the license on the ASA is Security plus. When I apply the activation key from Cisco most of the features are disabled.
[Code] ......
Cisco VPN :: 5505 - SSL License Upgrade?
Aug 11, 2011My client is having a 5505 which supports 2 SSL peers as per now and we want an upgrade . I had a look into GPL and I was confused with two of the following part numbers . Which one should I go for as both of these look same for me and there is a huge difference in price .
ASA5500-SSL-10
ASA 5500 SSL VPN 10 Premium User License
ASA-AC-E-5505
AnyConnect Essentials VPN License - ASA 5505 (25 Users)
Cisco :: ASA 5505 Licensed Limit For SSH Sessions?
Sep 11, 2011I have the default license for a ASA 5505 and this last Friday I received the attached log for SSH sessions through this firewall; we want to be clear about this issue. This limitation has to be with the 10 Inside Host or the Total VPN Peers limitations in this license? This firewall exists only to agree with a PCI requirement between our router and a communication with a Payment Card Industry Brand, all of this in the same site.
ASA5505 <164>Sep 09 2011 10:42:08: %ASA-4-450001: Deny traffic for protocol 6 src DMZ:X.X.X.X/2479 dst DMZ1:X.X.X.X/22, licensed host limit of 10 exceeded.
I hope that the communications through 22 TCP port, are not countable for license propose.
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 3, DMZ Restricted
Inside Hosts : 10
Failover : Disabled
VPN-DES : Enabled
[code]....
Cisco Firewall :: ASA 5505 10 Host Limit?
Feb 26, 2013I updated an ASA 5505 to 50 users, but I still can only connect 10 hosts. In Licensing it show 50 insides hosts. I also tried to update to ASA 8.4.5 but that did not work.
View 2 Replies View RelatedCisco VPN :: ASA 5505 License And Smartnet Selection?
Jun 11, 2012We purchased an ASA 5505 (ASA5505-BUN-K9) and more recently purchased the license to upgrade it from 10 to 50 users (L-ASA5505-10-50). I would like to provide remote access to users via AnyConnect - specifically, AnyConnnect on Windows plus the iPhone/iPad and Android versions. My understanding is that I should purchase the Anyconnect Essentials (L-ASA-AC-E-5505) and Anyconnect Mobile (L-ASA-AC-M-5505) licenses. Is this correct? If I do this, how many simultaneous remote access VPN connections (via Anyconnect clients) will the ASA then support?
Further, we did not initially purchase Smartnet with this device, but I would like to do so to gain access to software updates. Is there a site or document where I can locate the SKU #'s for Smartnet contracts that would be appropriate with our device?
The output of "show version" is below:
Cisco Adaptive Security Appliance Software Version 8.3(1)
Device Manager Version 6.3(1)
Compiled on Thu 04-Mar-10 16:56 by builders
System image file is "disk0:/asa831-k8.bin"
Config file at boot was "startup-config"
[code]....
Cisco VPN :: 5505 AnyConnect Mobile License
Mar 22, 2013I have ASA 5505 (8.4)I set up SSL AnyConnect VPN. I am able to connect from PC and MAC desktop computers using AnyConnect client but when I try use mobile device I am receiving error.Do I need buy the L-ASA-AC-M-5505=license?I see in description Platform: WindowsMy question is would it work with Apple mobile devices (iPhone, iPad)?
View 1 Replies View RelatedCisco Firewall :: ASA 5505 Activation License?
Oct 12, 2011I've purchased a used ASA 5505 device. Upon reseting and looking at the startup, I see that it is unable to retrieve Activation License and used default. Activation License shows as all zeros.
Is there a way to find whatever Activation License is tied to my device from Cisco without a service contract ? or I have to live with the default ?
Cisco Firewall :: ASA 5505 License Upgrade
Dec 17, 2012I have a Cisco ASA 5505 device with basic (default) license, currently all my reirections, VPN's, VLAN's(3 Vlan's) etc are configured on the same and are working fine.Now i need to upgrade my basic license to "Security Plus" for some additional features, if i upgrade it directley is there any complications in present rules, below is my doubhts
1. if i upgrade, did it change any of my present configurations ?
2. is there any name change or property changes for VLAN's or VPN's
3. did it affect the firewall functions
4. If anything goes wrong, can i restore it in to my old state using my previous dump.
Networking :: ASA 5505 10 User VPN License Information
May 21, 2012Is this a good price *NEW* for this unit...325.00
NEW SEALED* Cisco ASA5505-BUN-K9 Firewall 10-User
I assume 10-user means this device comes with a 10 user VPN license? Is there anything else I should be looking for when purchasing an ASA? Mainly looking to use my NetGear WNDR3700 as just a WiFi AP and not my edge device.
Cisco Firewall :: ASA 5505 - SSL WebVPN License
Dec 27, 2012I am planning to setup Clientless Web VPN on our ASA 5505 for secure access to a internal web resource from outside. When I checked the licensing details on the ASA using #sh ver I could notice thar Web VPN peers allowed is only 2 Does this mean that only two clientless simoultaneous connections are possible ?
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 3, DMZ Restricted
[Code]....
Cisco Firewall :: Upgrading ASA 5505 License
Oct 8, 2012One of our clients has recently purchased upgrade licenses for their cisco asa as follows
L-ASA5505-10-50=
and
L-ASA5505-SEC-PL=
after retrieving the activation key from the cisco website we tried entering the activation key to the asa both via ASDM and telnet when entering the command on telnet the shell becomes unresponsive when entering the command on ASDM we receive a "success" message followed by a request to restart ASDM and save the configuration after a minute or so i get an error screen saying "write mem" the asdm restarts and nothing changes.
Cisco Firewall :: Output Bandwidth Limit On ASA 5505
Jun 11, 2013I'm having a bit trouble to limit the bandwidth on outgoing traffic with a Cisco ASA 5505.
In my case I want to limit the bandwidth to 31mbit/s up and down on the outside interface. but with my current configuration, just the download rate gets limited to 31mbit/s when I do a tptest. and the upload is around 40/50mbit.
Here is the policy configuration,
access-list outside_bw extended permit ip any any
class-map outside_bw
match access-list outside_bw
[Code].....
Cisco Firewall :: ASA 5505 With Base License That Uses 3 VLAN
Jul 17, 2012I am working on ASA 5505 with Base License that uses 3 VLAN's.
-My VLAN 1 is for used for my home network.
-VLAN 2 is connected to the public Internet and my IP gets assigned by ISP dynamically.
-VLAN 3 is DMZ where I will have few VM's that would need access to and from the Internet.
I am looking to work with following:
1) 172.16.0.2 that sits on DMZ will need to access public Internet over port 80
2) Permit access from the Internet over port 3389 to 172.16.0.2
3) Permit any host on private VLAN (192.168.0.0 network) to access 172.16.0.2 over the port 3389
4) Permit second VM on the DMZ VLAN let say 172.16.0.3 to access public Internet on all ports. Access in to this host is not permitted.
5) For some reason DHCP hosts are NOT getting DNS (8.8.8.8) entry when IP hets assigned or renew. I have a statements below but it is not working.
Also, if ACL rules for VoIP are written correctly. The goal is to permit these ports (SIP related) to access VoIP router. [code]
Cisco Firewall :: ASA 5505 Security Plus License Upgrade?
Apr 19, 2012We want to upgrade one of our Cisco 5505 with Security Plus license. what is the difference between L-ASA5505-SEC-PL and ASA5505-SEC-PL upgrade licenses?
View 1 Replies View RelatedCisco Firewall :: Adding A DMZ On ASA 5505 With Base License
Dec 28, 2011I'm tring to setup a DMZ for a guest wireless off of a 5505. So this device has a base license. It has vlan1 and vlan 2 for inside and outside.Another vlan is configured to be a failover for the currently active wan connection. It is using the "no forward interface" command.Can I add another vlan as a DMZ if I use the "no forward interface" command? [code]
View 6 Replies View RelatedCisco Firewall :: Configuring ASA 5505 With Base License
May 11, 2011I have ASA 5505 with base licence. I configured NATing and VPN(site to site). All are working fine.My ASA is base license so i created 2 VLANS, one is inside and outside.Inside i am using 10.91.40.0/24 serie IP addresses.Below are the new requirements that i need to configre:
1. First 30 IP addresses only needs internet directly.( Servers and Management)
2. If remaining IPs likes to use web then traffic needs to forward one proxy server( where he gives user authentiation)
Cisco Firewall :: ASA 5505 - Retrieve Original License?
Feb 14, 2012I recently purchased a used Cisco ASA 5505 and I accidentally (and very stupidly) erased the flash without backing up my license.I have generated a demo licence from the Cisco licencing site, so I have basic functionality. However, the email that I received informed me that there is a higher licence already stored for my device.My question is, is there a way to get that licence back if I can provide the serial number / any other identification to prove I now own the ASA?
View 2 Replies View RelatedCisco Firewall :: ASA 5505 - DMZ Configuration With Base License
May 24, 2011My ASA 5505 base license allows for three VLANs, the third one can only initiate traffic to one other VLAN (as specified by no forward interface vlan <number> on the third VLAN). This doesn't mean it can't "access" the other VLAN, it just can't initiate traffic to it. A lot of people get that wrong.Let's say you've got three VLANs, one is OUTSIDE, two is DMZ, and three is INSIDE. On the second VLAN would I enter the no forward interface as vlan 3, then set the name via the nameif command and everything will work just fine. The DMZ will not be able to initiate traffic to the INSIDE, but will to the outside, and assuming you have your ACLs and NAT set up properly, it will be able to respond to traffic from the INSIDE.
Would that be best practice or would I enter the "no forward" interface as in VLAN 1, thus is being able to respond to traffic from the outside as opposed to the inside.
I had a DMZ set up but since there was an intrusion into my network, I am building it again.
Cisco Firewall :: 5505 Remote VPN And Backup ISP License
Oct 29, 2012I have 5505 license with default 10 user license, want to increment the remote vpn user to 50 user license;will it be on yearly basis.Another question, can we purchase security plus license for configuring the failover config ,as well support the 50 user license on the same..
View 3 Replies View RelatedCisco Firewall :: Limit Speed On Port Or VLAN ASA 5505
Aug 7, 2012We need to have one connection with less internet bandwidth assigned to it than all other other connections. Basically it is a separate conection from all others, incoming just from one switch port and separate VLAN.I know this can be done on the switch by limiting the bandwidth allocated to a port,
however, is it possible to have the speed limited down, just before it goes to the internet, ie, on the ASA, rather than doing it on the switch?The firewall is an ASA 5505.
Cisco Firewall :: 5505 Which License Needed To Buy For Normal Base
Sep 22, 2012I have a couple of 5505's with base licenses. One of the two has a limited output when running the sho version command, as it has a restricted license. What license I would need to buy in order to bring it up to "normal" base license ?
View 1 Replies View RelatedCisco Firewall :: How To Block ARES With ASA 5505 Base License
Sep 1, 2011Well, I tried using the cisco configuration for ASA 5505 for blocking P2P: url...but this configuration only is usefull with programs like Kazaa, so I try this configuration to block ARES but the problem is that ARES try to make downloads from different ports, ¿How do I block ARES if there are sereveral ports ?
View 1 Replies View RelatedCisco Firewall :: Adding Second Subnet On ASA 5505 With Security Plus License
Jan 31, 2012We recently upgraded a ASA 5505 with the security plus license to allow us to add a second subnet, but are having a few problems configuring the second subnet. The original subnet we have configured 10.1.1.0 is able to access the internet without any problems. However the new subnet 10.1.5.0 is unable to access the internet and when we ran a trace packet the nat config nat (inside) 1 0.0.0.0 0.0.0.0 is showing as the rule that drops the packet.
Additionally we have not been able to get the 2 subnets to talk to each other even though same-security-traffic permit inter-interface is configured. How to configure the subnet 10.1.5.0 to access the internet or to get the subnets to communicate. Below is a streamlined version of our current config.
!interface Vlan1nameif insidesecurity-level 100ip address 10.1.1.1 255.255.255.0 ospf cost 10!interface Vlan2nameif outsidesecurity-level 0ip address 66.66.66.66 255.255.255.240 ospf cost 10!interface Vlan13nameif corporatesecurity-level 100ip
[Code].....
Cisco Firewall :: ASA 5505 Security License And Vlans Supported?
May 18, 2013I am buying ASA 5505 with security license. It says it can support 20 vlans does it support 20 vlans by allowing to create subinterfaces? As it has 8 physical ports only?
View 3 Replies View RelatedCisco :: Blocking Site On ASA 5505 Version 8.2(1) Base License Using CLI?
Jul 13, 2012basic step to blocking site on ASA 5505 version 8.2(1) base license using CLI
View 1 Replies View RelatedCisco Firewall :: ASA 5505 - Activate DMZ Interface On Restricted License
Aug 3, 2009I'm trying to activate the DMZ interface on a restricted license ASA 5505 but I get an error when I try to ADD the interface. The message says "With the current license device will only supports 2 fully functional interfaces. Third interface can be added,but the traffic from this interface to another interface need to be blocked. Please make appropriate selection in advanced tab." I gather that I have to define the limitation myself? The problem is that I can't access the advanced tab because of the error. Can I do something via CLI to get through? I'm using ASA 8.2 and ASDM 6.2.
View 4 Replies View RelatedCisco Firewall :: ASA 5505 Base License - How To Get AnyConnect Working
Mar 29, 2012I have a base 5505 and would like to get AnyConnect working. To do that, would I have to first purchase either an essentials or premium license and then purchase the AnyConnect Mobile license?
View 1 Replies View RelatedCisco Firewall :: ASA 5505 Connection Limit And TIME_WAIT Freezing Device
Sep 30, 2011My little ASA 5505 is working great The device appears to be artificially crippled and limited to 10,000 connections. This isn't a "CPU limit" it's just some fake limit in the device as far as I can tell.
The problem we have is that we are only using around 500-600 connections and CPU usage is only like 25%, and yet the connection count is pegged at 10,000 and locks us out of our network.
I am pretty sure this is because there are a lot of "dead" TIME_WAIT connections hanging around not being used. In our application we only have the couple hundred connections but they do move around a bit every now and then.
Is there anyway to get the device to ignore the "dead" connections and not count them towards the artificial limit on the device given that it's pretty clear the CPU / etc., is not utilized sufficiently. These aren't real connections, we only have a couple 100 established, they do just move around a bit however.
We are really only using 500-700 connections according to our servers, the others are just sitting in TIME_WAIT doing nothing.
Cisco Firewall :: ASA 5505 - Limit Access To Remote Desktop To Range Of Outside IPs
Jan 7, 2013After getting hacked I want to limit terminal server/ remote desktop to only my computer. (although I may need to let other net in later)
In other words I want only computers from my home ip range (lets say my ISP gives me at home something in 28.28.XX.0) to be let in to the router at work and then to port 3389.
In the work ASA 5505 softwareVersion 7.2(4) I now have:
access-list outside_in extended permit tcp any interface outside eq 3389
static (inside, outside) tcp interface 3389 192.168.1.2 3389 netmask 255.255.255.255
acces-group outside_in in interface outside