Cisco Firewall :: Upgrading ASA 5505 License

Oct 8, 2012

One of our clients has recently purchased upgrade licenses for their cisco asa as follows

L-ASA5505-10-50=
and
L-ASA5505-SEC-PL=

after retrieving the activation key from the cisco website we tried entering the activation key to the asa both via ASDM and telnet when entering the command on telnet the shell becomes unresponsive when entering the command on ASDM we receive a "success" message followed by a request to restart ASDM and save the configuration after a minute or so i get an error screen saying "write mem" the asdm restarts and nothing changes.

View 4 Replies


ADVERTISEMENT

Cisco Firewall :: Upgrading License For More Context ASA 5580?

Sep 13, 2011

This is the situation I got to firewalls with failover and I need to upgrade the license so I can get more context (right now I have 5 context and I need 10) so I was looking at the procedure and I'm not sure If I need to restart the device or not. I was looking at this procedure:
 
Upgrading the License for a Failover using ASDM (No Reload Required) Use the following procedure using ASDM if your new license does not require you to reload. This procedure ensures that there is no downtime.

•1.       On the active unit, choose Configuration > Device Management > High Availability > Failover > Setup, and uncheck the Enable Failover check box. Now click Apply. The standby unit remains in a pseudo-standby state. Deactivating failover on the active unit prevents the standby unit from attempting to become active during the period when the licenses do not match. •

2.       Choose Configuration > Device Management > Licensing > Activation Key, and enter the new activation key that you obtained with the active unit serial number. Now click Update Activation Key.•

3.       Log into the standby unit by double-clicking its address in the Device List. If the device is not in the Device List, click Add to add the device. You might be prompted for credentials to log in.

4.       Choose Configuration > Device Management > Licensing > Activation Key, and enter the new activation key that you obtained with the standby unit serial number. Now click Update Activation Key.

5.       Log into the active unit again by double-clicking its address in the Device List. Choose Configuration > Device Management > High Availability > Failover > Setup, and re-check the Enable Failover check box.

6.       Click Apply. This completes the procedure.link: [URL]
 
But then I checked on the cisco web page that there are some license that need to reload I see this:
 
All models

#Downgrading any license (for example, going from 10 contexts to 2 contexts).#Note If a temporary license expires, and the permanent license is a downgrade, then you do not need to immediately reload the security appliance; the next time you reload, the permanent license is restored.
 
[URL]
 
So I just want to know if I'm UPGRADING from 5 to 10 context the reload applies to my situation or not?

View 1 Replies View Related

Cisco Firewall :: 5505 When Upgrading To Use Anyconnect

Jun 29, 2011

I have a ASA5505 with the Sec Plus license on it. This allows 25 VPN peers at any time according to the show version output:

Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 20, DMZ Unrestricted
Inside Hosts : Unlimited
Failover : Active/Standby
VPN-DES : Enabled
VPN-3DES-AES : Enabled
VPN Peers : 25
WebVPN Peers : 2
Dual ISPs : Enabled
VLAN Trunk Ports : 8
AnyConnect for Mobile : Disabled
AnyConnect for Linksys phone : Disabled
Advanced Endpoint Assessment : Disabled
UC Proxy Sessions : 2

This platform has an ASA 5505 Security Plus license.

1.)As far as I understand this means RA users and peer2peer combined?

2.)I need additional RA clients to be able to connect in at any time, as far as I know there is no way to allow more IPSEC clients then this due to hardware limitations?

3.)If I go for the Anyconnect option (10 users license), does this then mean that I can use the 25 IPSEC VPNs and at the same time have users using the 10 SSL Anyconnect VPNs at the same time?

4.)Which Anyconnect license am I supposed to buy if this is the route I go, the clients will all be connecting from their desktops most of the time?

5.)Is it difficult to set up?

View 4 Replies View Related

Cisco Firewall :: ASA 5505 - 3 DES License

May 20, 2013

I'm new to ASA and bought a used one from ebay but I cannot connect to the ASDM - I get an error in all the browsers.
 
Cannot communicate securely with peer: no common encryption algorithm(s).
 
(Error code: ssl_error_no_cypher_overlap)
 
Having browsed the support forums and Google - it seems I need the 3DES license. I have obtained an activation key from Cisco and applied it to my ASA 5505 however I get a warning about the device is licensed for a higher software level. the license on the ASA is Security plus. When I apply the activation key from Cisco most of the features are disabled.

[Code] ......

View 4 Replies View Related

Cisco Firewall :: ASA 5505 Activation License?

Oct 12, 2011

I've purchased a used ASA 5505 device.  Upon reseting and looking at the startup, I see that it is unable to retrieve Activation License and used default.  Activation License shows as all zeros.
 
Is there a way to find whatever Activation License is tied to my device from Cisco without a service contract ?  or I have to live with the default ?

View 5 Replies View Related

Cisco Firewall :: ASA 5505 License Upgrade

Dec 17, 2012

I have a Cisco ASA 5505 device with basic (default) license, currently all my reirections, VPN's, VLAN's(3 Vlan's) etc are configured on the same and are working fine.Now i need to upgrade my basic license to "Security Plus" for some additional features, if i upgrade it directley is there any complications in present rules, below is my doubhts
 
1. if i upgrade, did it change any of my present configurations ?
2. is there any name change or property changes for VLAN's or VPN's
3. did it affect the firewall functions
4. If anything goes wrong, can i restore it in to my old state using my previous dump.

View 1 Replies View Related

Cisco Firewall :: ASA 5505 - SSL WebVPN License

Dec 27, 2012

I am planning to setup Clientless Web VPN on our ASA 5505 for secure access to a internal web resource from outside. When I checked the licensing details on the ASA using #sh ver I could notice thar Web VPN peers allowed is only 2 Does this mean that only two clientless simoultaneous connections are possible ?
 
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs                       : 3, DMZ Restricted

[Code]....

View 5 Replies View Related

Cisco Firewall :: ASA 5505 With Base License That Uses 3 VLAN

Jul 17, 2012

I am working on ASA 5505 with Base License that uses 3 VLAN's.
 
-My VLAN 1 is for used for my home network.
-VLAN 2 is connected to the public Internet and my IP gets assigned by ISP dynamically.
-VLAN 3 is DMZ where I will have few VM's that would need access to and from the Internet.
 
I am looking to work with following:

1) 172.16.0.2 that sits on DMZ will need to access public Internet over port 80
2) Permit access from the Internet over port 3389 to 172.16.0.2
3) Permit any host on private VLAN (192.168.0.0 network) to access 172.16.0.2 over the port 3389
4) Permit second VM on the DMZ VLAN let say 172.16.0.3 to access public Internet on all ports. Access in to this host is not permitted.
5) For some reason DHCP hosts are NOT getting DNS (8.8.8.8) entry when IP hets assigned or renew. I have a statements below but it is not working.
 
Also, if ACL rules for VoIP are written correctly. The goal is to permit these ports (SIP related) to access VoIP router. [code]

View 1 Replies View Related

Cisco Firewall :: ASA 5505 Security Plus License Upgrade?

Apr 19, 2012

We want to upgrade one of our Cisco 5505 with Security Plus license. what is the difference between L-ASA5505-SEC-PL and ASA5505-SEC-PL upgrade licenses?

View 1 Replies View Related

Cisco Firewall :: Adding A DMZ On ASA 5505 With Base License

Dec 28, 2011

I'm tring to setup a DMZ for a guest wireless off of a 5505. So this device has a base license.  It has vlan1 and vlan 2 for inside and outside.Another vlan is configured to be a failover for the currently active wan connection.  It is using the "no forward interface" command.Can I add another vlan as a DMZ if I use the "no forward interface" command? [code]

View 6 Replies View Related

Cisco Firewall :: Configuring ASA 5505 With Base License

May 11, 2011

I have ASA 5505 with base licence. I configured NATing and VPN(site to site). All are working fine.My ASA is base license so i created 2 VLANS, one is inside and outside.Inside i am using 10.91.40.0/24 serie IP addresses.Below are the new requirements that i need to configre:
 
1. First 30 IP addresses only needs internet directly.( Servers and Management)

2. If remaining IPs likes to use web then traffic needs to forward one proxy server( where he gives user authentiation)

View 2 Replies View Related

Cisco Firewall :: ASA 5505 - Retrieve Original License?

Feb 14, 2012

I recently purchased a used Cisco ASA 5505 and I accidentally (and very stupidly) erased the flash without backing up my license.I have generated a demo licence from the Cisco licencing site, so I have basic functionality. However, the email that I received informed me that there is a higher licence already stored for my device.My question is, is there a way to get that licence back if I can provide the serial number / any other identification to prove I now own the ASA?

View 2 Replies View Related

Cisco Firewall :: ASA 5505 - DMZ Configuration With Base License

May 24, 2011

My ASA 5505 base license allows for three VLANs, the third one can only initiate traffic to one other VLAN (as specified by no forward interface vlan <number> on the third VLAN). This doesn't mean it can't "access" the other VLAN, it just can't initiate traffic to it. A lot of people get that wrong.Let's say you've got three VLANs, one is OUTSIDE, two is DMZ, and three is INSIDE. On the second VLAN would I enter the no forward interface as vlan 3, then set the name via the nameif command and everything will work just fine. The DMZ will not be able to initiate traffic to the INSIDE, but will to the outside, and assuming you have your ACLs and NAT set up properly, it will be able to respond to traffic from the INSIDE.
 
Would that be best practice or would I enter the "no forward" interface as in VLAN 1, thus is being able to respond to traffic from the outside as opposed to the inside.
 
I had a DMZ set up but since there was an intrusion into my network, I am building it again.

View 2 Replies View Related

Cisco Firewall :: 5505 Remote VPN And Backup ISP License

Oct 29, 2012

I have 5505 license with default 10 user license, want to increment the remote vpn user to 50 user license;will it be on yearly basis.Another question, can we purchase security plus license for configuring the failover config ,as well support the 50 user license on the same..

View 3 Replies View Related

Cisco Firewall :: 5505 Which License Needed To Buy For Normal Base

Sep 22, 2012

I have a couple of 5505's with base licenses. One of the two has a limited output when running the sho version command, as it has a restricted license. What license I would need to buy in order to bring it up to "normal" base license ?

View 1 Replies View Related

Cisco Firewall :: How To Block ARES With ASA 5505 Base License

Sep 1, 2011

Well, I tried using the cisco configuration for ASA 5505 for blocking P2P: url...but this configuration only is usefull with programs like Kazaa, so I try this configuration to block ARES but the problem is that ARES try to make downloads from different ports, ¿How do I block ARES if there are sereveral ports ?

View 1 Replies View Related

Cisco Firewall :: Adding Second Subnet On ASA 5505 With Security Plus License

Jan 31, 2012

We recently upgraded a ASA 5505 with the security plus license to allow us to add a second subnet, but are having a few problems configuring the second subnet.  The original subnet we have configured 10.1.1.0 is able to access the internet without any problems.  However the new subnet 10.1.5.0 is unable to access the internet and when we ran a trace packet the nat config nat (inside) 1 0.0.0.0 0.0.0.0 is showing as the rule that drops the packet.
 
Additionally we have not been able to get the 2 subnets to talk to each other even though same-security-traffic permit inter-interface is configured.  How to configure the subnet 10.1.5.0 to access the internet or to get the subnets to communicate.  Below is a streamlined version of our current config.

!interface Vlan1nameif insidesecurity-level 100ip address 10.1.1.1 255.255.255.0 ospf cost 10!interface Vlan2nameif outsidesecurity-level 0ip address 66.66.66.66 255.255.255.240 ospf cost 10!interface Vlan13nameif corporatesecurity-level 100ip

[Code].....

View 15 Replies View Related

Cisco Firewall :: ASA 5505 Security License And Vlans Supported?

May 18, 2013

I am buying ASA 5505 with security  license. It says it can support 20 vlans does it support 20 vlans by allowing to create subinterfaces? As it has 8 physical ports only?

View 3 Replies View Related

Cisco Firewall :: ASA 5505 - Activate DMZ Interface On Restricted License

Aug 3, 2009

I'm trying to activate the DMZ interface on a restricted license ASA 5505 but I get an error when I try to ADD the interface. The message says "With the current license device will only supports 2 fully functional interfaces. Third interface can be added,but the traffic from this interface to another interface need to be blocked. Please make appropriate selection in advanced tab." I gather that I have to define the limitation myself? The problem is that I can't access the advanced tab because of the error. Can I do something via CLI to get through? I'm using ASA 8.2 and ASDM 6.2.

View 4 Replies View Related

Cisco Firewall :: ASA 5505 Base License - How To Get AnyConnect Working

Mar 29, 2012

I have a base 5505 and would like to get AnyConnect working.  To do that, would I have to first purchase either an essentials or premium license and then purchase the AnyConnect Mobile license?

View 1 Replies View Related

Cisco Firewall :: ASA 5505 - Increase Inside Hosts License Count?

Feb 14, 2012

At the end of the day I simply need to upgrade the license on my ASA 5505 v7.2.4 (upgrade will come later as part of a larger project) to allow for >10 Inside Hosts. From what I've read there seems to be a 50 license upgrade out there. Can this be purchased directly? From whom? Will it only affect the Inside Hosts number and not affect any other licenses, configurations, etc. Just being overly cautious since this is way outside of my normal realm. Below is the current activation-key information....
 
Result of the command: "show activation-key"
  
Serial Number:  xxxxxxxxxxxxxx
Running Activation Key: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
  
Licensed features for this platform:
Maximum Physical Interfaces : 8        
VLANs                       : 3, DMZ Restricted
Inside Hosts                : 10       
Failover                    : Disabled
VPN-DES                     : Enabled  
VPN-3DES-AES                : Enabled  
VPN Peers                   : 10       
WebVPN Peers                : 2        
Dual ISPs                   : Disabled 
VLAN Trunk Ports            : 0        
  
This platform has a Base license. 
 
The flash activation key is the SAME as the running key.

View 2 Replies View Related

Cisco :: Upgrading From LMS 3.1 To 3.2 / Can Use Same License File

Mar 14, 2012

if we are upgrading from lms 3.1 to 3.2, can we use the same license file of 3.1?

View 4 Replies View Related

Cisco Switching/Routing :: Upgrading License On 24P 3750X

Jan 16, 2013

Am attempting to load a new license on a 24 Port 3750X. Was LANBase code, need to get it to IPBase. Have the license file. Have put it on the flash drive. Running "license install flash:" i get the message "%Error reading flash: (is a directory)%Error: License installation failed with error: XML parsing failed"The license installation instructions are a bit cryptic so I could be messing it up. However, every variation I can think of is not working. The command listed above gets the most "promising" results.

View 1 Replies View Related

Cisco Application :: Upgrading ACE30 8Gbps License?

May 23, 2013

I need to upgrade a pair of ACE30s to 8Gbps.According to the administration guide, there will be no impact.BUT, it states also:
 
All license installations except one have no adverse impact to an operating ACE. [URL] Ofcourse, nothing is said about which one has impact.I assume it's the 16Gbps license but how to confirm this?

View 1 Replies View Related

Cisco Switching/Routing :: 3750 License Requirement For Upgrading IOS To K9

Nov 9, 2011

I have cisco 3750 with ipservices license and I am running with c3750e-universal-mz.122-50.SE2. And I would like to upgrade the IOS " k9" IOS. ie c3750e-universalk9-mz.122-50.SE2. Is there any license required for that ?Also any difference in the IOS upgrade procedure.

View 1 Replies View Related

Cisco Switching/Routing :: License For Upgrading C2960-48PST-S To L Version

Dec 8, 2011

I want to know is there is an license for upgrading the C2960-48PST-S to the "L" version (Lan Base).

View 2 Replies View Related

Cisco Firewall :: Difference Of VPN Plus License And Security Plus License ASA 5520

Oct 16, 2012

What's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.

View 1 Replies View Related

Cisco VPN :: Upgrading Firmware From 7.2 To 8.0 On ASA 5505

May 9, 2011

I'm about to upgrade my asa to version 8 from 7. I see a lot of instructions on using tftp to accomplish this.  I also see in  the GUI where i can upload the image files for version 8.  is there any disadvantage from using the GUI instead of a tftp server?

View 1 Replies View Related

Cisco WAN :: How To Buy License Of ASA 5505

Dec 6, 2011

I have cisco asa 5505 Base Line .. so i want to buy the license key to get more features . so what is the requirments and how i can buy .

View 1 Replies View Related

Cisco VPN :: 5505 - SSL License Upgrade?

Aug 11, 2011

My client is having a 5505 which supports 2 SSL peers as per now and we want an upgrade . I had a look into GPL and I was confused with two of the following part numbers . Which one should I go for as both of these look same for me and there is a huge difference in price .
 
ASA5500-SSL-10
ASA 5500 SSL VPN 10  Premium User License
ASA-AC-E-5505
AnyConnect Essentials VPN License - ASA 5505 (25 Users)

View 4 Replies View Related

ASA 5505 - 10 License Limit?

Nov 27, 2011

Hit my 10 license limit on my 5505 and am trying out how to clear the cache so my main machines can get online.

I connected some VMs to the internet so i could download updates and now im stuck.

View 10 Replies View Related

Cisco VPN :: ASA 5505 License And Smartnet Selection?

Jun 11, 2012

We purchased an ASA 5505 (ASA5505-BUN-K9) and more recently purchased the license to upgrade it from 10 to 50 users (L-ASA5505-10-50).  I would like to provide remote access to users via AnyConnect - specifically, AnyConnnect on Windows plus the iPhone/iPad and Android versions.  My understanding is that I should purchase the Anyconnect Essentials (L-ASA-AC-E-5505) and Anyconnect Mobile (L-ASA-AC-M-5505) licenses.  Is this correct?  If I do this, how many simultaneous remote access VPN connections (via Anyconnect clients) will the ASA then support?
 
Further, we did not initially purchase Smartnet with this device, but I would like to do so to gain access to software updates.  Is there a site or document where I can locate the SKU #'s for Smartnet contracts that would be appropriate with our device?
 
The output of "show version" is below:
 
Cisco Adaptive Security Appliance Software Version 8.3(1)
Device Manager Version 6.3(1)
 Compiled on Thu 04-Mar-10 16:56 by builders
System image file is "disk0:/asa831-k8.bin"
Config file at boot was "startup-config"

[code]....

View 2 Replies View Related

Cisco VPN :: 5505 AnyConnect Mobile License

Mar 22, 2013

I have ASA 5505 (8.4)I set up SSL AnyConnect VPN. I am able to connect from PC and MAC desktop computers using AnyConnect client but when I try use mobile device I am receiving error.Do I need buy the L-ASA-AC-M-5505=license?I see in description Platform: WindowsMy question is would it work with Apple mobile devices (iPhone, iPad)?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved