Cisco :: Upgrading From LMS 3.1 To 3.2 / Can Use Same License File
Mar 14, 2012if we are upgrading from lms 3.1 to 3.2, can we use the same license file of 3.1?
View 4 Replies
ADVERTISEMENT
Cisco Firewall :: Upgrading ASA 5505 License
Oct 8, 2012One of our clients has recently purchased upgrade licenses for their cisco asa as follows
L-ASA5505-10-50=
and
L-ASA5505-SEC-PL=
after retrieving the activation key from the cisco website we tried entering the activation key to the asa both via ASDM and telnet when entering the command on telnet the shell becomes unresponsive when entering the command on ASDM we receive a "success" message followed by a request to restart ASDM and save the configuration after a minute or so i get an error screen saying "write mem" the asdm restarts and nothing changes.
Cisco Switching/Routing :: Upgrading License On 24P 3750X
Jan 16, 2013Am attempting to load a new license on a 24 Port 3750X. Was LANBase code, need to get it to IPBase. Have the license file. Have put it on the flash drive. Running "license install flash:" i get the message "%Error reading flash: (is a directory)%Error: License installation failed with error: XML parsing failed"The license installation instructions are a bit cryptic so I could be messing it up. However, every variation I can think of is not working. The command listed above gets the most "promising" results.
View 1 Replies View RelatedCisco Firewall :: Upgrading License For More Context ASA 5580?
Sep 13, 2011This is the situation I got to firewalls with failover and I need to upgrade the license so I can get more context (right now I have 5 context and I need 10) so I was looking at the procedure and I'm not sure If I need to restart the device or not. I was looking at this procedure:
Upgrading the License for a Failover using ASDM (No Reload Required) Use the following procedure using ASDM if your new license does not require you to reload. This procedure ensures that there is no downtime.
•1. On the active unit, choose Configuration > Device Management > High Availability > Failover > Setup, and uncheck the Enable Failover check box. Now click Apply. The standby unit remains in a pseudo-standby state. Deactivating failover on the active unit prevents the standby unit from attempting to become active during the period when the licenses do not match. •
2. Choose Configuration > Device Management > Licensing > Activation Key, and enter the new activation key that you obtained with the active unit serial number. Now click Update Activation Key.•
3. Log into the standby unit by double-clicking its address in the Device List. If the device is not in the Device List, click Add to add the device. You might be prompted for credentials to log in.
4. Choose Configuration > Device Management > Licensing > Activation Key, and enter the new activation key that you obtained with the standby unit serial number. Now click Update Activation Key.
5. Log into the active unit again by double-clicking its address in the Device List. Choose Configuration > Device Management > High Availability > Failover > Setup, and re-check the Enable Failover check box.
6. Click Apply. This completes the procedure.link: [URL]
But then I checked on the cisco web page that there are some license that need to reload I see this:
All models
#Downgrading any license (for example, going from 10 contexts to 2 contexts).#Note If a temporary license expires, and the permanent license is a downgrade, then you do not need to immediately reload the security appliance; the next time you reload, the permanent license is restored.
[URL]
So I just want to know if I'm UPGRADING from 5 to 10 context the reload applies to my situation or not?
Cisco Application :: Upgrading ACE30 8Gbps License?
May 23, 2013I need to upgrade a pair of ACE30s to 8Gbps.According to the administration guide, there will be no impact.BUT, it states also:
All license installations except one have no adverse impact to an operating ACE. [URL] Ofcourse, nothing is said about which one has impact.I assume it's the 16Gbps license but how to confirm this?
Cisco Switching/Routing :: 3750 License Requirement For Upgrading IOS To K9
Nov 9, 2011I have cisco 3750 with ipservices license and I am running with c3750e-universal-mz.122-50.SE2. And I would like to upgrade the IOS " k9" IOS. ie c3750e-universalk9-mz.122-50.SE2. Is there any license required for that ?Also any difference in the IOS upgrade procedure.
View 1 Replies View RelatedCisco Switching/Routing :: License For Upgrading C2960-48PST-S To L Version
Dec 8, 2011I want to know is there is an license for upgrading the C2960-48PST-S to the "L" version (Lan Base).
View 2 Replies View RelatedCisco :: Upgrading To LMS 4.0.1 / File Copy In Progress
Apr 5, 2011After the installation LMS 4.0 I make Upgrading on LMS4.0.1. The process remains stand with the message "File Copy in progress..." during several hours. After the Reboot of the server it points me Cisco Works again with LMS 4.0 starts.OS Version: Windows 2008 R2
View 14 Replies View RelatedCisco :: Upgrading LMS 4 To 4.0.1 - Stuck At File Copy In Progress?
Jul 18, 2011I have an issue installing LMS 4.0.1. LMS 4.0.1 installation is left with "file copy in progress". We waited for few hours and the process java.exe taking the cpu (among 45%).After few tried, same problem occurs ...Antivirus is correctly disabled (I checked the process), and the installation file was decompressed.LMS 4.0 was correctly installed using R2 patch on Windows 2008 Server R2.
View 2 Replies View RelatedCisco :: Upgrading Wireless LAN Controller Over TFTP With Large File?
Jun 13, 2012I have to upgrade our Wireless LAN Controller modules inside 2811 routers.I downloaded files from Cisco site, verified MD5 hashes and hoped it will be pretty easy.the problem is, that WLC is only capable of code upgrade via TFTP and that the image size is ~80MBTFTP transfer hangs at approximately 64MB at the exact same packet number[CODE]
View 4 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.2 License File Installation Failed
Sep 19, 2011have a ACS 5.2 version installed on Vmware . I purchased below liscense
Product Name : L-CSACS-5-LRG-LIC=
Product Description : L-CSACS-5-LRG-LIC= : ACS 5 Large Deployment License (Electronic Delivery)
When i am trying to upgrade the liscense i am getting an Error " Liscense file installation failed : The liscense file must contain single base liscense "
Cisco WAN :: 3750X - Evaluation License File Install Fail?
Mar 13, 2011I'm trying to install a license file on a 3750x stack of 4 switches. I was running IPBase but want to upgrade to IPServices.
Install a License
3750E#copy tftp flash1:
3750E#172.x.x.x
3750E#FDO1111111_201101111111111.lic
3750E# license install flash1: FDO1111111_201101111111111.lic #
Cisco Firewall :: Difference Of VPN Plus License And Security Plus License ASA 5520
Oct 16, 2012What's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.
View 1 Replies View RelatedCisco :: Installation PI1.2 Basic License With LMS4.0 License For 100 Devices
Apr 3, 2013I’m stuck in some problem with installation of LMS4.0 in customer site.
- we purchase a LMS4.0(CWLMS-4.0-100-K9) but couldn’t install it on Windows server 2008 R2 64bit because those things don’t support each other.
- I need to upgrade the LMS4.0 to LMS4.2 that is supporting Windows server 2008 R2 64bit.
- So, I ordered following items via product update tool (url...) [code]
- In this status, how to install LMS4.2 with license for 100 devices? If I install R-PI12-BASE-K9 first, can i enter a licese for 100 devices for CWLMS-4.0-100-K9 into PI1.2?
Cannot Access File Because Another Process Has Locked Portion Of File
Jul 26, 2011I am working on a Drupal site which is on a virtual server (the way it's been explained to me). I've been told I need to work with it through webdev. So I can copy a file off the server and onto my local machine. I make my edits and then try to upload it to the server. I get locked out with the message: Error 0x80070021: The process cannot access the file because another process has locked a portion of the file. I have tried shutting down my code editor, opening and closing the connection, tried different methods of reaching the server (Cyberduck and through Window's map network feature) to no avail. What can I do?
View 1 Replies View RelatedCisco :: Upgrading From WCS 6.0.181.0 To 7.0.230.0?
Nov 22, 2012upgrading from our current WCS version to 7.0.230.0 (not going for NCS at the moment).
View 4 Replies View RelatedCisco :: Upgrading WCS 7.0.164.0 To 7.0.172.0?
May 18, 2011I'm trying to upgrade my WCS from 7.0.164.0 to 7.0.172.0 but it keeps throwing me into the manual process because it detects multiple versions. Seems a previous upgrade from 6.0.132 to 7.0.164 did dot remove the 6.0.132 directory or files.
Am I safe to delete the 6.0.132 directory/files and trying again?
Cisco :: Upgrading WLC 4404?
Mar 9, 2012I need to upgrade our Wireless Lan Controller to support new APs. I was able to get the new code due to a security advisory on the code we are running now. I am upgrading from 6.0.196.0 to 7.0.220.0 (MD). I have read in some of the technical docs that the WCS has to match the WLC. I cannot find any documentation as to what this entails on the WCS.
WCS version is 6.0.132.0 running on Windows.
Cisco WAN :: Upgrading A 7609 12.2 To 15.X
Jan 15, 2012What are the prerequisites before doing this? I have to upgrade a router this week if there is an opportunity to move it to a code that is more current that the one the client is currently running which is 12.2(33)SRD4. I see on the Cisco Support site that after this code, everything moves to 15.
View 2 Replies View RelatedCisco :: 1020 Upgrading WCS And WLC
Jan 30, 2011I'm planning on upgrading our wireless lan controllers and WCS. I would like to upgrade the controllers to 4.2.209 as our 1020 APs will not be supported by any later version, I think. And, I would like to upgrade our WCS to 6.0.181.0 so it's ready for when we upgrade our controllers to 6.x.x.x after we get some APs that can support it. Is the 6.0.181.0 on the WCS going to give me any problems monitoring or administering the controlllers if they are only 4.2.209?
The Cisco WCS release must be the same or more recent than the controller software release. Upgrade the Cisco WCS first to prevent any unexpected problems. Cisco WCS supports database upgrades only from the following official Cisco WCS releases: [code]
Cisco Wireless :: Upgrading MSE From 7.0.105 To 7.0.201.204
Sep 5, 2011If I upgrade MSE with WCS, do I need only the file : Cisco-MSE-L-K9-7.0.201.204-64bit.bin. Or do I need to upload all the 4 database-installer files also ?
View 1 Replies View RelatedCisco WAN :: Upgrading 3825 ISR From 12.4 To 15?
Apr 10, 2011What are the prerequisites before doing this? I have to upgrade a router this Wednesday evening if there is an opportunity to move it to a code that is more current that the one the client is currently running which is 12.4(25b). I see on the Cisco Support site that after this code, everything moves to 15.
View 5 Replies View RelatedCisco :: Upgrading WLC 4402 From 4.2.176.0 To 7.0.230.0?
Apr 7, 2012I am in the process of upgrading my 4402 to version 7.0.230.0 and am confused on the premise of the firmware and the bootloader. From what I currently understand, I can upgrade directly to the 7.0.230.0 firmware from my current 4.2.176.0, then I should upgrade to the latest bootloader image. But I have also seen posts where I should update the bootloader software to the latest version, then put on the latest firmware.
I have seen conflicting reports where I must step through each bootloader version, 4.x to 5.x to 6.x to 7.x to make sure I have all the fixes, but I have also seen instructions, where you can jump to the very latest and the fixes are cumulative.
Cisco :: Upgrading NCS 1.1.1.24 To Prime 1.3
Mar 13, 2013I am currently running NCS 1.1.1.24 and trying to upgrade to prime 1.3, but running into some issues, i applied the patch ncs_patch-1.1.1.24-upgrade-12.tar.gz, but when i try to acutally upgrade i get the following...
admin# application upgrade PI-upgrade-bundle-1.3.0.20.tar.gz defaultRepo
Save the current ADE-OS running configuration? (yes/no) [yes] ?
Generating configuration...
Saved the ADE-OS running configuration to startup successfully (code)
Cisco WAN :: Upgrading ASR 1000 Out Of Box?
Dec 9, 2012Looking for simple doc to follow for upgrade iOS image for Cisco Asr 1000. Not worried about downtime. New hardware not in production yet.
View 4 Replies View RelatedCisco Infrastructure :: Upgrading IOS On 881
Sep 25, 2012I am managing a Cisco 881 with Adv Ip Services ( CISCO881-SEC-K9). It has IOS 15.0(1) M8 on it. I see that there is a new IOS version 15.2M&T that (I think is applicable), and I have read the upgrade procedures for upgrade via USB and TFT.
If I install it will my license for Adv Ip Services be preserved or overwritten. And if the latter, do I need to export it and reapply it? If so, what is the process?
Upgrading Server 2k3 To 2k8?
Jan 17, 2011Purchased a new server. Want to carry over DHCP/DNS/DC/SHARES roles from current domain controller to new 2008 it's a small <20 users server. Is there a solid way to transfer Active Directory and Shares and such?maybe image over 2k3 to the 2008 server, and upgrade to 2008?
View 9 Replies View RelatedCisco :: Upgrading Software On ASA Firewalls?
Feb 13, 2012Am I able to legally download and upgrade software versions still on ASA firewalls?I have not had an issue in the past as this has not effected the license.I cant find anything online saying that you cant due to Cisco's new Software license policy changes.
View 1 Replies View RelatedCisco :: Activating And Upgrading AIP Module
Apr 8, 2013I have cluster of firewalls which inclueds AIP module and are in production. Due to some issue modules could not be activated. Now I need to activate and udate signature of them. So whether I can do all this activity without effecting my production (Zero downtime).
View 5 Replies View RelatedCisco :: Upgrading From 7.0.116.0 To 7.2.110.0 To Support 3602 APs?
Aug 16, 2012I am upgrading from 7.0.116.0 to 7.2.110.0 to support the 3602 APs. Is it a different license to upgrade to 7.2.110.0 or can I directly upgrade to 7.2.110.0 without a new license?We currently have a 5508 base license.
View 1 Replies View RelatedCisco VPN :: ASA5505 - Upgrading To AnyConnect
Nov 7, 2011Can you upgrade an ASA5505 remotely and can you add Anyconnect support (for mobile VPN access) in conjunction with a pre-existing VPN config (so not to interupt the Cisco VPN Client users)?
View 1 Replies View RelatedCisco Wireless :: Upgrading Wlc 5508 From 7.0.116 To 7.4?
May 26, 2013I have a wlc 5508 running version 7.0.116.0 that I need to uppgrade to use the CAP2602I AP. I understand that I need to upgrade it to version 7.0.240 before 7.4.100 to avoid loosing HREAP VLAN mappings, and I have also read that i need to install the FUS image [URL]. In what order should this be done? Shlod the FUS image be installed before new firmware ore after firmware or after 7.0.240 but before 7.4?
View 1 Replies View RelatedCisco :: Unable To Login After Upgrading To LMS 4.1
Dec 5, 2011i recently upgraded our Ciscoworks LMS from 4.0 to 4.1. after i installed the upgrade the admin login doesnt work, neither does any other account. i have tried resetting the password but it doesnt work.
View 3 Replies View Related