Cisco :: Upgrading WLC 4402 From 4.2.176.0 To 7.0.230.0?
Apr 7, 2012
I am in the process of upgrading my 4402 to version 7.0.230.0 and am confused on the premise of the firmware and the bootloader. From what I currently understand, I can upgrade directly to the 7.0.230.0 firmware from my current 4.2.176.0, then I should upgrade to the latest bootloader image. But I have also seen posts where I should update the bootloader software to the latest version, then put on the latest firmware.
I have seen conflicting reports where I must step through each bootloader version, 4.x to 5.x to 6.x to 7.x to make sure I have all the fixes, but I have also seen instructions, where you can jump to the very latest and the fixes are cumulative.
View 2 Replies
ADVERTISEMENT
Jan 4, 2012
Any instructions on performing an upgrade from a 4402 to 5508?
View 7 Replies
View Related
Nov 22, 2012
upgrading from our current WCS version to 7.0.230.0 (not going for NCS at the moment).
View 4 Replies
View Related
May 18, 2011
I'm trying to upgrade my WCS from 7.0.164.0 to 7.0.172.0 but it keeps throwing me into the manual process because it detects multiple versions. Seems a previous upgrade from 6.0.132 to 7.0.164 did dot remove the 6.0.132 directory or files.
Am I safe to delete the 6.0.132 directory/files and trying again?
View 5 Replies
View Related
Dec 4, 2011
I am running a WLC 4402 with software version 6.0.182.0. Which WCS version should I use or does it matter?
View 5 Replies
View Related
Mar 9, 2012
I need to upgrade our Wireless Lan Controller to support new APs. I was able to get the new code due to a security advisory on the code we are running now. I am upgrading from 6.0.196.0 to 7.0.220.0 (MD). I have read in some of the technical docs that the WCS has to match the WLC. I cannot find any documentation as to what this entails on the WCS.
WCS version is 6.0.132.0 running on Windows.
View 7 Replies
View Related
Jan 15, 2012
What are the prerequisites before doing this? I have to upgrade a router this week if there is an opportunity to move it to a code that is more current that the one the client is currently running which is 12.2(33)SRD4. I see on the Cisco Support site that after this code, everything moves to 15.
View 2 Replies
View Related
Jan 30, 2011
I'm planning on upgrading our wireless lan controllers and WCS. I would like to upgrade the controllers to 4.2.209 as our 1020 APs will not be supported by any later version, I think. And, I would like to upgrade our WCS to 6.0.181.0 so it's ready for when we upgrade our controllers to 6.x.x.x after we get some APs that can support it. Is the 6.0.181.0 on the WCS going to give me any problems monitoring or administering the controlllers if they are only 4.2.209?
The Cisco WCS release must be the same or more recent than the controller software release. Upgrade the Cisco WCS first to prevent any unexpected problems. Cisco WCS supports database upgrades only from the following official Cisco WCS releases: [code]
View 2 Replies
View Related
Sep 5, 2011
If I upgrade MSE with WCS, do I need only the file : Cisco-MSE-L-K9-7.0.201.204-64bit.bin. Or do I need to upload all the 4 database-installer files also ?
View 1 Replies
View Related
Apr 10, 2011
What are the prerequisites before doing this? I have to upgrade a router this Wednesday evening if there is an opportunity to move it to a code that is more current that the one the client is currently running which is 12.4(25b). I see on the Cisco Support site that after this code, everything moves to 15.
View 5 Replies
View Related
Mar 13, 2013
I am currently running NCS 1.1.1.24 and trying to upgrade to prime 1.3, but running into some issues, i applied the patch ncs_patch-1.1.1.24-upgrade-12.tar.gz, but when i try to acutally upgrade i get the following...
admin# application upgrade PI-upgrade-bundle-1.3.0.20.tar.gz defaultRepo
Save the current ADE-OS running configuration? (yes/no) [yes] ?
Generating configuration...
Saved the ADE-OS running configuration to startup successfully (code)
View 1 Replies
View Related
Dec 9, 2012
Looking for simple doc to follow for upgrade iOS image for Cisco Asr 1000. Not worried about downtime. New hardware not in production yet.
View 4 Replies
View Related
Sep 25, 2012
I am managing a Cisco 881 with Adv Ip Services ( CISCO881-SEC-K9). It has IOS 15.0(1) M8 on it. I see that there is a new IOS version 15.2M&T that (I think is applicable), and I have read the upgrade procedures for upgrade via USB and TFT.
If I install it will my license for Adv Ip Services be preserved or overwritten. And if the latter, do I need to export it and reapply it? If so, what is the process?
View 3 Replies
View Related
Feb 9, 2011
I am looking around hwo to know the flash and ram installed in WLC 4402? try looking any command, sh ver not there. even in WCS.
View 2 Replies
View Related
Nov 12, 2012
we have a 4402 controller with sw 7.0.116 and a wcs with sw 7.0.172.
We have to create a new wireless network, and would like to send the ssid to only one AP. Is this possible ?
View 1 Replies
View Related
Apr 29, 2013
I have a cisco WLC 4402, i have a problem with people trying to log into wlc 4402 GUI console with wrong pass. Are there any ways that I can allow certain IP to go to or see the log in page of WLC?
View 5 Replies
View Related
Jan 18, 2012
we are using Cisco Aironet 1130 AG and a Cisco 4402 WLC in our network. The certificate service is installed on a Windows 2008 R2 server. We use a standalone Root CA with a Enterprise Sub CA hierarchy. Issueing certificates to clients works fine. The vendor and ca certificates are installed on the WLC and the user have his user certificate. During implementation we used following document: url... Instead of Anonymous Bind, we use a service user to read in AD (works fine, too).
We use the Intel/PRO wireless utility on our Testclient and configured it for EAP-FAST and TLS. We can select the installed certificate in the utility, but when we try to connect, the utility throw the message: "Authentication failed due to an invalid certificate".We´ve logged the WLC and thats a part of the logfile (i´ve greyed out all enterprise data): [code]
View 3 Replies
View Related
Nov 20, 2011
I have 2 4402 WLC's and am in the process of deploying 1042 APs out to sites. But The AP's wont recognize the WLC. I have configured the DNS for CAPWAP but still no dice. I have had to serial into each unit and give it a static IP and then I can see it on the WLC. Shoulsnt this be automatic?
View 21 Replies
View Related
Jan 1, 2007
Currently have a WLC4402 installed with 21 AP's reporting to it. The controller is running at LWAPP3 with version 3.2.116.21. The WLC was purchased prior to Cisco buying Air-e-space, and has a 36 AP license. When attempting to install additional 1242AG-A-K9 ap's, the controller will not acknowledge them. I have verified the LAN confiuration as correct, and working properly.
View 9 Replies
View Related
Jul 29, 2010
Any explanation about this warning from the WLC4402 after the software upgrade to 7.0.96. version? this is the message: Warning: WLC has detected its IP add xx.xx.xx.xx being used by a machine with MAC add xx:xx:xx:xx.and the MAC add found is the the mac add of the dynamic interface of the WLC.
View 7 Replies
View Related
Apr 1, 2013
I installed a chained SSL cert on our anchor/guest 4402 a few years ago.We now have a need to replace the 4402 w/ a 5508, and I got everything configured, ready to go, except that darn cert.I can no longer locate the private key that was used to sign the original CSR.Is there any way to export the current cert from the 4402, so that I can import to the 5508? Or am I SOL?
View 3 Replies
View Related
Jul 24, 2011
I was able to successfully implement MS-PEAP authentication with 5508 WLAN controllers and Cisco ACS v4.2. However, when I integrated 4402 WLC with version code 7.0.116, it did not pass across any authentication requests. Did a debug aaa events enable and there was no output. Configured another SSSID with PSK to test that my controller was OK and aaa debug was working, and there were CLI messages when I associated an AP.
why the 4402 is not working as I have compared configs with the 5508 and there is no difference. The shared secret is configured on both ACS and Controller and CA is downloaded on the ACS.
View 5 Replies
View Related
Jun 29, 2011
My WLC running 6.0.182.0 suddenly could not accept more than 47 APs! Ihave a 1240 trying to join but failed with no obvious reason (no special errors in debugging).
I unplugged one of the joined and the first one joined!! I replugged the second one but could not join!! I unplugged the first one and replugged the second one: the second joined the controller but the first could not associate again!
View 4 Replies
View Related
Mar 27, 2012
My client cannot communicate between each other, why ?
Controller: AIR-WLC4402-25-K9
AP: AIR-LAP1252AG-A-K9
View 6 Replies
View Related
Mar 1, 2012
I'm using RADIUS and FlexConnect APs. The issue is intermittently users will lose connectivity as if they're de-authenticated. Their clients still believe they're associated to wireless but they have no network connectivity. On Windows 7 we receive the exclamation point over the signal strength indicator.
There doesn’t seem to be any rhyme or reason as to what is causing this. It doesn’t seem to happen at any particular time intervals or anything else I can identify. Sometimes users will go entire days without experiencing connectivity issues sometimes they can’t go five minutes. When the clients are experiencing the issues they cannot even ping their default gateway.
The setup was initially the following:
Site A: 1142N APs and RADIUS server (server 2003) users are authenticating to.
Site B: Flex 7510 running code 7.0.116
Between site A and site B there is a site to site VPN with no restrictions.
After some time of working with TAC and not getting anywhere I setup the following:Site A: 4402 WLC running code 7.0.116 connected the same 1142N APs HREAP mode. I had the same issue with connectivity with that setup.Today I changed over to local mode and as of yet I haven’t had reports of connectivity issues.
When running ‘debug client MAC’ I see no indication of connectivity issues. I also have an NCS and I don’t see anything indicating what the issue is there as well. I’ve tried with both enabling and disabling ‘H-REAP Local Auth’. We seem to experience the issue in H-REAP standalone mode as well.
View 10 Replies
View Related
Jun 25, 2012
Can 3600 series model AP work with WLC 4402 with existing license, we purchased 25 LIC pack and still using only 15. Any recommended Part no on 3600 series with external Antenna
View 5 Replies
View Related
Jun 28, 2011
I have a 4402 being used as a dmz anchor and we use WCS to allow our Helpdesk to create lobby ambassador accounts. Recently they have been getting error messages when attempting to create accounts. I am seeing the database maxxed out at 2048. The docs state database entries are made up of mac filters(don't use)..ap mic/ssc(don't use)..Dynamic interfaces(minimal) management users(2) local netusers (100 approx)..and excluded clients(none). So the numbers don't add up.I am on 4.2.61.0 code.. I will say also that WCS shows alot more netuser accounts than my anchor does but no where the numbers to max out the database. Is there some other criteria that hits against the datasbase number?? And what can I do on the WCS to insure it si synch'd up against the dmz anchor other than a audit..
View 3 Replies
View Related
Jan 17, 2011
Purchased a new server. Want to carry over DHCP/DNS/DC/SHARES roles from current domain controller to new 2008 it's a small <20 users server. Is there a solid way to transfer Active Directory and Shares and such?maybe image over 2k3 to the 2008 server, and upgrade to 2008?
View 9 Replies
View Related
Feb 13, 2012
Am I able to legally download and upgrade software versions still on ASA firewalls?I have not had an issue in the past as this has not effected the license.I cant find anything online saying that you cant due to Cisco's new Software license policy changes.
View 1 Replies
View Related
Apr 8, 2013
I have cluster of firewalls which inclueds AIP module and are in production. Due to some issue modules could not be activated. Now I need to activate and udate signature of them. So whether I can do all this activity without effecting my production (Zero downtime).
View 5 Replies
View Related
Aug 16, 2012
I am upgrading from 7.0.116.0 to 7.2.110.0 to support the 3602 APs. Is it a different license to upgrade to 7.2.110.0 or can I directly upgrade to 7.2.110.0 without a new license?We currently have a 5508 base license.
View 1 Replies
View Related
Nov 7, 2011
Can you upgrade an ASA5505 remotely and can you add Anyconnect support (for mobile VPN access) in conjunction with a pre-existing VPN config (so not to interupt the Cisco VPN Client users)?
View 1 Replies
View Related
May 26, 2013
I have a wlc 5508 running version 7.0.116.0 that I need to uppgrade to use the CAP2602I AP. I understand that I need to upgrade it to version 7.0.240 before 7.4.100 to avoid loosing HREAP VLAN mappings, and I have also read that i need to install the FUS image [URL]. In what order should this be done? Shlod the FUS image be installed before new firmware ore after firmware or after 7.0.240 but before 7.4?
View 1 Replies
View Related
