Cisco Wireless :: Upgrading From 4402 To 5508?
Jan 4, 2012Any instructions on performing an upgrade from a 4402 to 5508?
View 7 Replies
ADVERTISEMENT
Cisco :: Upgrading WLC 4402 From 4.2.176.0 To 7.0.230.0?
Apr 7, 2012I am in the process of upgrading my 4402 to version 7.0.230.0 and am confused on the premise of the firmware and the bootloader. From what I currently understand, I can upgrade directly to the 7.0.230.0 firmware from my current 4.2.176.0, then I should upgrade to the latest bootloader image. But I have also seen posts where I should update the bootloader software to the latest version, then put on the latest firmware.
I have seen conflicting reports where I must step through each bootloader version, 4.x to 5.x to 6.x to 7.x to make sure I have all the fixes, but I have also seen instructions, where you can jump to the very latest and the fixes are cumulative.
Cisco Wireless :: Upgrading Wlc 5508 From 7.0.116 To 7.4?
May 26, 2013I have a wlc 5508 running version 7.0.116.0 that I need to uppgrade to use the CAP2602I AP. I understand that I need to upgrade it to version 7.0.240 before 7.4.100 to avoid loosing HREAP VLAN mappings, and I have also read that i need to install the FUS image [URL]. In what order should this be done? Shlod the FUS image be installed before new firmware ore after firmware or after 7.0.240 but before 7.4?
View 1 Replies View RelatedCisco Wireless :: How To Connect One 5508 And 4402
Jan 16, 2012I need to install one 5508 and a 4402 together to bring redundancy to a wireless environment.Can I do this?. What are the neccesary steps to perform this?, the idea behind this is to bring redundancy is the primary WLC falls for any reason.
View 4 Replies View RelatedCisco Wireless :: 5508 As Backup For 4402-25-K9?
Jun 12, 2012My customer has a 4402-25-K9 and need a backup (failover) controller to avoid data transmision break when primary controller goes down.4402 are end of sale so I have a question can I use 5508 to get Controller Failover Protection with 4402 ?
View 3 Replies View RelatedCisco Wireless :: 5508 And 4402 Controller Anchoring?
Mar 11, 2012I am running 5508 wireless controllers. I pass along another agency's WLAN across my wireless network that is anchored to their older 4402 controller.
I wish to run the new 3600 series APs and am planning on migrating to NCS and the new 7.2 code.
I know that the older 4400 series controllers will not handle the newer 7.1 or 7.2 code. However, i still wish to maintain this anchor relatiosnhip with the older 4402 controller. I need to know if this will work or not.
Cisco Wireless :: Replace 4402 With 5508 Controller
Oct 6, 2012I'd like to replace my 4402 Wireless controller with a new 5508. I have migrated the exact configuration from my 4404 controller to the 5508 and they are both running the same version of code. I'm worried that if I replace the 4402 with the 5508 controller, the Access Points will not rejoin to the new controller or they will join but will have lost their configuration e.g. AP Name/location etc etc. AP models registered to the existing controller are 1131, 1142 and 3502. I am also using Cisco WCS.
As long as the new controller has the exact same configuration, is it possible to replace the 4404 with the 5508? Will the existing Access Points join the new controller? Is there any other configuration required? I have read about doing this using mobility groups however would rather not if possible.
Cisco Wireless :: Migrating From 4402 To 5508 - AP Compatibility
May 30, 2013We currently run six 4402 Wireless lan controllers - these are managed by a WCS server - soon to be replaced by Cisco Prime. We run a mixture of LAP1242 and LAP1142 wireless access points. I need to add more but have been told by my supplier that the both these AP's are now end of sale and cannot be purchased.
The replacement AP's are the 2600 series - but I have been told that these are not compatible with my existing 4402 controllers.
To make matters worse I was then advised that if I purchase the new 5580 controllers the older LAP1242 access points will not work with it and require replacing - this, for me, is a lot of access points.
What I need to know is:
What access points, if any, are currently available that are compatible with my 4402 controllers and a future 5508 installation?
I ssem to be in a situation now where I cannot buy any access points that will work with my 4402's but if I upgrade all my current 1242's will not funtion with the new 5508 controller!
Cisco Wireless :: WLC 5508 Tunnel To 4402 Anchor
Jul 5, 2011We have got a WLC 4402 as an anchor that provides guest internet access to our visitors. Our wan sites have 4402's running a tunnel to this anchor for guest traffic. We have got a new site coming up that will have a 5508 as its WLC. I am trying to determine if the 5508 will successfully form a tunnel with the existing 4402 anchor. I am assuming that it will be ok or maybe the 4402 will require an ios upgrade. Our AP's everywhere are 1131's but the new site will have the later versions which can work with the CAPWAP based 5508.
will the tunnel between the 4402 and 5508 work well or will it require an ios + bootstrap upgrade on the 4402 and subsequently the rest of the 4402's or it will not work altogetherwill the CAPWAP AP's at the new site work well with the 4402 LWAPP anchor - I am assuming that they will since the CAPWAP compatibility requirements are really between the AP and its local WLC. Our 4402's are on 4.2.61.0 and I am proposing to management that we should upgrade these to 7.0.116.0 to prepare the infrastructure for any potential issues.
Cisco Wireless :: 4402 And 5508 Controller Installation
Oct 30, 2012My client has on cisco 4402 controller running with 48 AP on this. Client requires to add another 25 AP but licence on the current controller is not supported client bought another controller 5508 with 25 AP.
I have been tasked to installe 5508 with conjestion of 4402. I have make the software version on both of them as below
AIR-CT5500-K9-7-0-235-3.aes
AIR-WLC4400-K9-7-0-235-3.aes
To match the same IOS version on both the controller. I have following challenges with me.
- 5508 will registered 25 AP while .. 4408 will continue with 48 AP.
- 5508 is going to be in DC and it will be directly connected to firewall as default gateway for guest SSID. 4402 is going to be on another building.
- How can I make sure that Users connected to AP registered with 4402 will have the same deafult gateway as 5508. Thre is no layer 2 connectivity between this two controllers.
- There is no romaing going to happen between this two controller as both are two different locations and user will leave one location will disconnect and it joines bak when it reach to another controller.
- Is there any way to configure 5508 as master and 4402 as slave kind of connections?
Cisco Wireless :: AP 1131 AG Do Not Associate To Controller 5508 Or 4402
Apr 18, 2013I have 10 Access-Point model 1131 AG are new AP.
When I connect the access-Point to the network, the AP associate only one time but i go to wireless for see the AP, i can see downloading of IOS, but the ios is 3.0.59, the ap don not nothing. I can not change any parameters.
Cisco Wireless :: 4402 Guest Anchor Controller 5508 Software 7.2
Nov 6, 2012We currently have all of our foreign AP controllers on software version 7.0.116. This consists of a mixture of 4400 and 5508 WLC's. Our guest anchor is a 4402 on version 7.0.116. We are replacing the guest anchor with a 5508. We are also upgrading our 5508 wireless controllers to version 7.2 to support the 3600 series AP's. My question is what is the recommeded code that the anchor controller should be on? Should it also be upgraded to 7.2? If we upgrade the anchor controller to version 7.2, will this affect anchoring to 4400 series foreign controllers still on7.0.116?
View 9 Replies View RelatedCisco Wireless :: 5508 Stop Propagating Newer Firmware For Aps After Upgrading WLC?
Mar 24, 2013We have a centralized Cisco 5508 WLC with 84 APs(1142N) in branches (slow WAN links), Current WLC IOS version is 7.0.220.0.Recently we bought new Aps Air CAP36021-N. These APs are not compatible with existing WLC IOS. If I upgrade WLC, then can I stop propagating newer firmware for old Aps? Because it kills all WAN.
View 9 Replies View RelatedCisco :: WLC 5508 - Possible To Anchor To 4402 Running 7.0.116.0
Apr 23, 2012We are deploying two 5508 WLC running 7.2 ios. Is it possible to anchor these to a 4402 running 7.0.116.0. Is there any version mismatch issues. We can find documents on the older compatibility but not on the new code.
View 9 Replies View RelatedCisco :: Maximum Associated Clients For WLC 4402 And 5508?
Jun 22, 2011We have 2 WLCs, 4402 (main) and 5508 (backup). While we turn on both devices, 4402 have 10 APs, and 5508 have 10 APs as well. Total connected clients will be 120+, but when we turn off either 1 wlc, let's say only 4402 is power on, total 20 APs joined, but the total client will be 90+, never reach over 100 clients. The same happened on 5508, is there any maximum associated connection on WLC?
View 1 Replies View RelatedCisco :: WLC 5508 And 4402 - Mac Address Filtering Database
Mar 27, 2012l have implemented mac filtering auth on my wireless network, l have 2 WLC ( 1 WLC 5508 and 1 WLC 4402, and I wonder if you can migrate the mac address database of a WLC to another and how can l do this.
View 4 Replies View RelatedCisco :: 5508 / 4402 - Office Extend Suggestion
Dec 15, 2011I have attached a diagram of the current topology. At present, we have two 5508 connected to our core. We also have a 4402 behind the firewall (DMZ) just purely for guest access. So the staff users connect to the access point which in turns connects to the Staff WLC 1 (if this fails then to Staff WLC2). any guest user connect to the access point which in turn connects to Staff WLC which anchors to Guest WLC which then provides access. Since the guest is behind the DMZ they can only access the internet and not out internal network.
Now we want to office extend our network - we want our users to use 1132 AP at home to access the Infrastructure. is there a way we can do this without disturbing the existing infrastructure. On reading Cisco website, i know the best practice is to use 2 5508 (one behind the firewall and the other anchored to this access the internet network ) i thought since we have a Cisco (dmz) switch (48 port) and only the 4402 (Guest WLC) is connected to it, maybe purchase another 5508 WLC and connect to the 48 port Cisco (dmz) switch. will this work?
Cisco Wireless :: Upgrading MSE From 7.0.105 To 7.0.201.204
Sep 5, 2011If I upgrade MSE with WCS, do I need only the file : Cisco-MSE-L-K9-7.0.201.204-64bit.bin. Or do I need to upload all the 4 database-installer files also ?
View 1 Replies View RelatedCisco Wireless :: Can't Get APs To Recognize 4402 WLC
Nov 20, 2011I have 2 4402 WLC's and am in the process of deploying 1042 APs out to sites. But The AP's wont recognize the WLC. I have configured the DNS for CAPWAP but still no dice. I have had to serial into each unit and give it a static IP and then I can see it on the WLC. Shoulsnt this be automatic?
View 21 Replies View RelatedCisco Wireless :: WLC 4402 Has Detected Its IP Add Being Used By Mac
Jul 29, 2010Any explanation about this warning from the WLC4402 after the software upgrade to 7.0.96. version? this is the message: Warning: WLC has detected its IP add xx.xx.xx.xx being used by a machine with MAC add xx:xx:xx:xx.and the MAC add found is the the mac add of the dynamic interface of the WLC.
View 7 Replies View RelatedCisco Wireless :: 4402 WLC Cannot Join More Than 47 APs
Jun 29, 2011My WLC running 6.0.182.0 suddenly could not accept more than 47 APs! Ihave a 1240 trying to join but failed with no obvious reason (no special errors in debugging).
I unplugged one of the joined and the first one joined!! I replugged the second one but could not join!! I unplugged the first one and replugged the second one: the second joined the controller but the first could not associate again!
Cisco Wireless :: AP Supporting 4402 WLC?
Jun 25, 2012Can 3600 series model AP work with WLC 4402 with existing license, we purchased 25 LIC pack and still using only 15. Any recommended Part no on 3600 series with external Antenna
View 5 Replies View RelatedCisco Wireless :: AP 1262 Cannot Join WLC 4402
Jun 7, 2012We have two cisco 1262 AP and a 4402 WLC, the AP cannot join the WLC. The AP gets the address from dchp
I cannot ping the AP address from the WLC, but i can ping the default gateway and other VLAN addresses.
I already read the info on the this link : [URL] Still our AP cannot join the WLC no matter what i have tried.
Setup
- VLAN setup on a Cisco 3560 48 port poe Switch
- tunk configured btwn the Gi Interface and the Management physical port
- WLC mode is configured for Layer 3
- AP Manager and Management are in the same Subnet
- Option 43 is configured for the with the AP Manager's IP address
- Opotion 60 is also configured with AP Manager's IP address
- the port connected to the APs are in the AP Manager VLAN
Cisco Wireless :: AAA Authentication Failure On WLC 4402?
Jun 13, 2012Error: AAA Authentication Failure for UserName:radiususername User Type: WLAN USER
I am using a window radius server. I have added my WLC 4402 as a radius client on my radius server.
I followed the instructions on the MS link : [URL]
I want to use my windows raduis authentication for WLC management login and Web-Auth for guest WLAN user login.
Cisco Wireless :: 4402 Code Upgrade To 7.0.230.0
Feb 3, 2013Our company has a customer with a Cisco 4402 WLC and a code version of 4.2.130.0 . The customer wants to upgrade the code to 7.0.230.0. Is there any flash size requirement when upgrading to 7.0.230.0? (upgrade train: 4.2.130.0 ----> 4.2.209.0 ----> 7.0.230.0), How can I find the flash size?
View 2 Replies View RelatedCisco Wireless :: Configuration Migration Of WLC 4402
Feb 3, 2013We got WLC 4402 running software 7.0.235 and would like to backup the configuration and restore on 5508. Is this doable? Do we need to be on the same version as WLC 4402. How to get cisco document to follow the steps if the above is doable,5508 is new with no setup.
View 6 Replies View RelatedCisco :: Wlc 4402 - Wireless Client Ip Address?
Mar 7, 2011I have two wlc 4402 to control 50 AP 1131. 2 WLC: wlc-01 and wlc-02, wlc-02 config as backup wlc in the same mobility group. Client authentication:EAP with Microsoft IAS/AD.All AP have joined wlc-01. Wireless client work well with wlc-01.For testing I config access point AP01 have primary wlc: wlc-01, secondary: wlc-02 If I change config of AP01 like this: primary wlc: wlc-02, secondary: wlc-01. Client is hard to connect to wlc-02 and it only connect when client set static ip ALL wlc run this softwar image: 7-0-98-0 Should I send wlc-02 to warranty service?
View 8 Replies View RelatedCisco Wireless :: 4402 Could Not Register IP Add On MSCB
May 17, 2012I do get this error all the time on my WLC 4402 logs:
"Could not Register IP Add on MSCB. MSCB still in init state. Address:e4:ce:8f:13:e4:de[...It occurred 2 times.!]"
Cisco Wireless :: WLC 4402 Ver 5.1.151.0 Working With Air-ap1041n-e-k9?
Jul 18, 2012I have WLC 4402 working with AIR-AP1131AG-E-K9. Need to buy another pair. I looked to the side air-ap1041n-e-k9. Tell me whether or not the compatibility of the controller and the AP1041n? One more question. When buying in 1131 is still in the box and power cord to the point. The new 1041, the purchase comes with the point of the power cord?
View 13 Replies View RelatedCisco :: 4402 WLC Guest Wireless Setup
Jul 24, 2012I am trying to setup a Wireless Network on my WLC that is totaly independent of our internal LAN. Port1 is designated at the .14.0 network and Port2 is the .18.0 network. The 14 network (Port1) will be the guest and 18 network (Port2) the internal wireless.
The issue i am having is nothing is routing to Port1. I have the Guest Wireless set to get DHCP from the WLC and i can get an address but i cant get internet access. I tried configuring a Network Route but it will only let me set the service port as the Gateway and not the IP for Port1.
I am running software version 5.1.151.0 and using this guide as it is the only one i can find. [URL]
Here is a screen shot of my Interface config.
Cisco Wireless :: Web Authentication Using LDAP On WLC 4402?
Dec 18, 2011We are attempting to use LDAP for web authentication on a WLC 4402.
[URL]
You are able to connect to the SSID and it reidrects you to the login page as it should. When you enter your username and password you get a message that "the username and password combination you have entered is invalid." Based on the following log it looks like the LDAP bind is the issue.
*LDAP DB Task 1: Dec 19 11:19:26.584: %AAA-3-LDAP_CONNECT_SERVER_FAILED: ldap_db.c:1038 Could not connect to LDAP server 1, reason: 1005 (LDAP bind failed).
We are able to test the following configuration with ldp.exe successfully,
Server: ***.***.***.***
Port Number: 389
Bind Username: CiscoBYOT
[Code].....
Cisco Wireless :: WLC 4402 No Boot-up Dead
Jun 22, 2012I tried to upgrade the cisco boorloader pf WLC 4402 from version 4 to 7.2. I updated ER.Aes FOR 7.2 (EARLY RELEASE.aes). It was updated perfectly and then I rebooted controller....now i can only see blank screen from connected console.I tried the flash of other lan controller but its not working because the issue is in the ROM as the boadloader file is in the ROM which is corrupted now i want the solution to upgrade the boatloader file inside the ROM.
View 1 Replies View RelatedCisco Wireless :: AP 1262 Cannot Join WLC 4402
Jun 6, 2012We have two cisco 1262 AP and a 4402 WLC, the AP cannot join the WLC.
The AP gets the address from dchp
I cannot ping the AP address from the WLC, but i can ping the default gateway and other VLAN addresses.
I already read the info on the this link : [URL]
Still our AP cannot join the WLC no matter what i have tried.
Setup
- VLAN setup on a Cisco 3560 48 port poe Switch
- tunk configured btwn the Gi Interface and the Management physical port
- WLC mode is configured for Layer 3
- AP Manager and Management are in the same Subnet
- Option 43 is configured for the with the AP Manager's IP address
- Opotion 60 is also configured with AP Manager's IP address
- the port connected to the APs are in the AP Manager VLAN