Cisco Wireless :: Upgrading MSE From 7.0.105 To 7.0.201.204
Sep 5, 2011If I upgrade MSE with WCS, do I need only the file : Cisco-MSE-L-K9-7.0.201.204-64bit.bin. Or do I need to upload all the 4 database-installer files also ?
View 1 Replies
ADVERTISEMENT
Cisco Wireless :: Upgrading Wlc 5508 From 7.0.116 To 7.4?
May 26, 2013I have a wlc 5508 running version 7.0.116.0 that I need to uppgrade to use the CAP2602I AP. I understand that I need to upgrade it to version 7.0.240 before 7.4.100 to avoid loosing HREAP VLAN mappings, and I have also read that i need to install the FUS image [URL]. In what order should this be done? Shlod the FUS image be installed before new firmware ore after firmware or after 7.0.240 but before 7.4?
View 1 Replies View RelatedCisco Wireless :: Upgrading A 1242 AP From IOS To LWAPP
Sep 12, 2011I am trying to upgrade an autonomous IOS 1242 AP to LWAPP and I am having an issue with finding the right code to complete the upgrade. I have upgraded the AP to c1240-rcvk9w8-tar.124-21a.ja2.tar, but now I think I need a JX version of code to have it join a controller, and I can't find this anywhere on the Cisco site.
View 5 Replies View RelatedCisco Wireless :: AP 1131 Upgrading To LWAP
May 20, 2012We're in the process of upgrading our Wireless AP's from autonomus to LWAP. We're doing the upgrades remotely (we have 100's of sites to do, and it's not possible to be there to console on to each one), using a local computer to upgrade them to LWAP's with the Cisco Upgrade Tool.Having some inconsistent bugs pop up though from time to time.The most common one is that it basically buggers up the IP address after applying the recovery firmware image. It's supposed to keep the IP it had according to the IPFile.txt (for example 172.25.25.4), but it does something very weird... it keeps the last two octets (so 25.4 from the e.g) but replaces the first two octets with a 192.168 address. So the final address in this example after the UpgradeTool has done its work, is 192.168.25.4 - which is compeltely wrong.
This causes it to be unable to talk to the WLC (obviously, with bogus IP information it will struggle), and gives us big problems in that it wont ever come up unless someone can console to the AP and fix it. We can usually resolve the issue by munging about on the switch - switching the port it's connected to between access and trunk and doing some shut/noshut cycles seems to do the trick mostly.
Cisco Wireless :: Upgrading From 4402 To 5508?
Jan 4, 2012Any instructions on performing an upgrade from a 4402 to 5508?
View 7 Replies View RelatedWRT54G - Upgrading Wireless Router
Jan 2, 2013I've been using my WRT54G for at least 4 years if I'm not mistaken. I've never had any issues with it at home. I use it to connect my i Pad, iPhone, Mac Book, and XBOX 360 (wired). My question is should I just leave it as is or will I see any performance gain on upgrading my wireless home router? I eventually would like to get 6-10 IP wired cameras for home CCTV system.
View 5 Replies View RelatedCisco Wireless :: Upgrading 1252s From Autonomous To LWAPP
May 22, 2012I need to upgrade several 1252s from autonomous to LWAPP. I have not been able to find the upgrade tool for 1250s or instructions for CLI upgrade. I wil be using NCS to do final configuration once the APs come online.
View 1 Replies View RelatedCisco :: Upgrading Wireless LAN Controller Over TFTP With Large File?
Jun 13, 2012I have to upgrade our Wireless LAN Controller modules inside 2811 routers.I downloaded files from Cisco site, verified MD5 hashes and hoped it will be pretty easy.the problem is, that WLC is only capable of code upgrade via TFTP and that the image size is ~80MBTFTP transfer hangs at approximately 64MB at the exact same packet number[CODE]
View 4 Replies View RelatedCisco Wireless :: WS-6504E / WiSM Can't Function Normally After Upgrading From Version 6.0.182
Oct 13, 2011I have a WiSM installed in WS-6504E, vesion 6.0.182. It can't function normally after upgrading to version7.0.220.When it was unstable, I found three strange condition 1. A lot of log looks like this*osapiReaper: Mar 10 14:53:39.282: %OSAPI-3-FILE_OPEN_FAILED: osapi_file.c:370 Failed to open the file : /proc/1059/stat.(erno 24)*osapiReaper: Mar 10 14:53:39.282: %OSAPI-3-TASK_GETTIME_FAILED: osapi_task.c:3431 Failed to retrieve statistics (/proc/<pid>/stats) for task 'fmcHsTask'2. Internal Temperature was showed "sensor failed"3. CPU User load is Zero?
View 8 Replies View RelatedCisco Wireless :: WS-6504E WiSM Can't Function Normally After Upgrading From Version 6.0.182
Mar 9, 2013I have a WiSM installed in WS-6504E, vesion 6.0.182. It can't function normally after upgrading to version7.0.220. [code]
View 1 Replies View RelatedCisco Wireless :: Upgrading TONS Of Aironet AP1100 (SSC) To Join WLC?
Sep 7, 2012upgrading 300 Aironet 1100 series i.e. 1121 to newly bought WLC.Problem is 1100 are using SSC cert that I must do " debug pm pki enable " on each of 300 AP upgrading to extract its key-hash then copy to Security>AAA>AP Policy and repeat for 300 times. It is the impossible task.What would you recommend us to do the any other methods to achive the same goal?
View 2 Replies View RelatedLinksys Wireless Adapters :: Upgrading WUSB54G To Windows 7?
Jul 9, 2012We've been getting broadband through a WRT54G v2.2 router into numerous computers with WUSB54G v4 wireless adapters into winXP PC's for years now, but I've recently got a 64bit Win7 PC which needs internet connection. I spent all day today trying to find drivers, workarounds and god knows what for the WUSB54G v4 which (I'm pretty sure now ) don't exist for a 64bit system.
How do I get internet into this Windows 7 PC? Will I just need to get a new adapter? (and will it be compatible with the current router?) I don't especially want to get a new router and several new adapters just because we have one new Win7 PC... If I do just need to get a new adapter, in terms of performance/compatibility?
Oh, and how ancient is the hardware we actually have, and does/will it effect the internet in any way?
Linksys Wireless Router :: How Does Upgrading To EA3500 Benefit Me
Feb 5, 2013I currently have an old Linksys WRT160n.How does upgrading to the EA3500 benefit me? How does this differ than my current router which is still wireless N? I know it is Dual band but does that really matter?If my ISP provides me with 10 Mbps does it really matter what router I go with? How exactly does it speed up gaming/netflix/etc?
View 9 Replies View RelatedTP-Link ADSL2+ Wireless :: TD-W8961ND Upgrading Fault?
Feb 13, 2013Region : UnitedArabEmirates
Model : TD-W8961ND
Hardware Version : V1
Firmware Version :
ISP :
I have two W8961ND, one for may office and the another one for use at my home, I tried to upgrade my device but during the upgrading the power supply plugged out and after that my device didn't boot up any more, so how can I repair my device, Is there any uploader for it's hardware chip because it doesn't work with it's LAN port or WIFI at this moment
Dell :: XPS Q740 - Upgrading Wireless Network Card
Feb 27, 2013I have a two year old Dell, an XPS Q740 (from the system info) Intel i7 CPU. Works fine but I've recently upgraded my router to an N standard with dual channels operating at 2.4ghz and 5ghz, so I'd like to improve the the network options for my machine. Looking at the device manager, it says I'm using an Intel WiFi link BGN 1000 which operates at 2.4ghz.
What card if any I can install to bring about a speed improvement. Fiber broadband is also due in my area soon so I want to take advantage of this.
Cisco Wireless :: 5508 Stop Propagating Newer Firmware For Aps After Upgrading WLC?
Mar 24, 2013We have a centralized Cisco 5508 WLC with 84 APs(1142N) in branches (slow WAN links), Current WLC IOS version is 7.0.220.0.Recently we bought new Aps Air CAP36021-N. These APs are not compatible with existing WLC IOS. If I upgrade WLC, then can I stop propagating newer firmware for old Aps? Because it kills all WAN.
View 9 Replies View RelatedLinksys Wireless Router :: WRT54G-TM / Upgrading To New Firmware Failed?
Jan 23, 2012I'm attempting to upgrade to firmware 5.00.38 for my WRT54G-TM router, but it keeps telling me "upgrade failed" after like 3-4 seconds of trying. It says I currently have firmware: DD-WRT v24-sp2 (06/13/09) mega - build 12288. I've tried restetting to factory defaults before upgrading, but doesn't work.
View 1 Replies View RelatedLinksys Wireless Router :: E1200 Bricked Due To Upgrading Firmware
Jan 3, 2012I have a little problem with my new E1200. Before the E1200 I had a WRT160N that was bricked to death by a power surge due upgrading the firmware. Till that moment the WRT160N met al the required specs as told in the description..I have from my ISP a 40Mbit cable line and was always downloading at those speeds wired aswell as wireless...
Now with the E1200 I get the 40Mbit only wired... wireless it only allows it up to max. 20Mbit.I figured that I didn't do anything different than the Linksys I had before..I'm working with a MacBook from late 2007 running OSX Lion 10.7.2, Built-in AirPort Extreme card (802.11a/b/g/n)My wireless setting with a WP2 Personal Security Mode
TP-Link Dual-Band Wireless :: Firmware Upgrading TL-WR2543ND
Jun 17, 2011Region : Bulgaria
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version :
ISP :
Region : Others
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version : 3.13.6 Build 110923 Rel.53137n
ISP :
I bought the TL-R2543ND. The hardware version is V1.2. I want to ask, is there firmware upgrading for this version . Here I see only version V1.URL
Cisco Wireless :: 3500 - Upgrading Large Number Of 1142 Access Points
May 21, 2012I am upgrading a large number of 1142 access points with 3500's does and one know if the back plate for the 1142's can be reused for the 3500's.
View 4 Replies View RelatedCisco Wireless :: AIR-AP1231G-E-K9 - Upgrading Autonomous Access Points To Lightweight Mode
Jun 6, 2013I have AP AIR-AP1231G-E-K9 with iOS c1200-k9w7-tar.123-7.JA2 and I want to convert it to Lightweight Mode with iOS image c1200-rcvk9w8 tar.124-21a.JA2. First of all, is it possible? Because I tried to convert from tftp server command (archive download-sw /overwrite /reload tftp://ipaddress/image.tar) and I cannot see in the controller. (controller and aps are in the same network)
View 11 Replies View RelatedLinksys Wireless Router :: How To Recover WRT54G Light After Upgrading Firmware
Jan 22, 2012After unsuccess firmware upgrade, my router is leds always light.How I can recover it?
View 3 Replies View RelatedLinksys Wireless Router :: Choppy Video Streaming After Upgrading E4200 Firmware
Jan 2, 2012Video streaming was fine until I upgraded the firmware. Is it possible to downgrade the firmware?
View 3 Replies View RelatedLinksys Wireless Router :: E3000 Restoring Factory Defaults / Upgrading To Latest Firmware
Sep 16, 2010I just upgraded to a E3000 from a WRT54G and I am having some issues with network speed.I have no special settings and have even tried restoring factory defaults and upgrading to the latest firmware to no avail.The time I notice the biggest hit is when transferring files locally on the network (WiFi and LAN).Let me note that I do know the difference between MB/s & Mb/s and the like.I have Comcast 20Mb/s Down, 1.5Mb/s Up (just a FYI, the main issue is local transfers)
With default settings my Laptop (ASUS N82JQ, Atheros AR9285 Wireless Network Adapter), connects to the router at only 65Mb/s (with full signal).Upload seems to be more decent ~600KB/s (Transferring files from wireless n laptop to the gigabit desktop).Download seems to be limited to ~150KB/s (Copying files from the wired gigabit desktop to the wireless n laptop).These speeds are horrible! ~5hrs to transfer 3GB of data!
One of my laptops had a card that was capable of both 2.4 & 5Ghz and I was previously getting ~2000-5000KB/s (2-5MB/s) transfers with this router (But I had to do a system restore on it and reset the router). My ASUS laptop seems to only work with 2.4Ghz though. If I change the 2.4Gh Wireless settings on the router to "Auto(20MHz or 40MHz)" the laptop will connect at 150Mb/s, but the speeds are the same slow speeds as above.
Cisco :: Upgrading From WCS 6.0.181.0 To 7.0.230.0?
Nov 22, 2012upgrading from our current WCS version to 7.0.230.0 (not going for NCS at the moment).
View 4 Replies View RelatedCisco :: Upgrading WCS 7.0.164.0 To 7.0.172.0?
May 18, 2011I'm trying to upgrade my WCS from 7.0.164.0 to 7.0.172.0 but it keeps throwing me into the manual process because it detects multiple versions. Seems a previous upgrade from 6.0.132 to 7.0.164 did dot remove the 6.0.132 directory or files.
Am I safe to delete the 6.0.132 directory/files and trying again?
Cisco :: Upgrading WLC 4404?
Mar 9, 2012I need to upgrade our Wireless Lan Controller to support new APs. I was able to get the new code due to a security advisory on the code we are running now. I am upgrading from 6.0.196.0 to 7.0.220.0 (MD). I have read in some of the technical docs that the WCS has to match the WLC. I cannot find any documentation as to what this entails on the WCS.
WCS version is 6.0.132.0 running on Windows.
Cisco WAN :: Upgrading A 7609 12.2 To 15.X
Jan 15, 2012What are the prerequisites before doing this? I have to upgrade a router this week if there is an opportunity to move it to a code that is more current that the one the client is currently running which is 12.2(33)SRD4. I see on the Cisco Support site that after this code, everything moves to 15.
View 2 Replies View RelatedCisco :: 1020 Upgrading WCS And WLC
Jan 30, 2011I'm planning on upgrading our wireless lan controllers and WCS. I would like to upgrade the controllers to 4.2.209 as our 1020 APs will not be supported by any later version, I think. And, I would like to upgrade our WCS to 6.0.181.0 so it's ready for when we upgrade our controllers to 6.x.x.x after we get some APs that can support it. Is the 6.0.181.0 on the WCS going to give me any problems monitoring or administering the controlllers if they are only 4.2.209?
The Cisco WCS release must be the same or more recent than the controller software release. Upgrade the Cisco WCS first to prevent any unexpected problems. Cisco WCS supports database upgrades only from the following official Cisco WCS releases: [code]
Cisco WAN :: Upgrading 3825 ISR From 12.4 To 15?
Apr 10, 2011What are the prerequisites before doing this? I have to upgrade a router this Wednesday evening if there is an opportunity to move it to a code that is more current that the one the client is currently running which is 12.4(25b). I see on the Cisco Support site that after this code, everything moves to 15.
View 5 Replies View RelatedCisco :: Upgrading WLC 4402 From 4.2.176.0 To 7.0.230.0?
Apr 7, 2012I am in the process of upgrading my 4402 to version 7.0.230.0 and am confused on the premise of the firmware and the bootloader. From what I currently understand, I can upgrade directly to the 7.0.230.0 firmware from my current 4.2.176.0, then I should upgrade to the latest bootloader image. But I have also seen posts where I should update the bootloader software to the latest version, then put on the latest firmware.
I have seen conflicting reports where I must step through each bootloader version, 4.x to 5.x to 6.x to 7.x to make sure I have all the fixes, but I have also seen instructions, where you can jump to the very latest and the fixes are cumulative.
Cisco :: Upgrading NCS 1.1.1.24 To Prime 1.3
Mar 13, 2013I am currently running NCS 1.1.1.24 and trying to upgrade to prime 1.3, but running into some issues, i applied the patch ncs_patch-1.1.1.24-upgrade-12.tar.gz, but when i try to acutally upgrade i get the following...
admin# application upgrade PI-upgrade-bundle-1.3.0.20.tar.gz defaultRepo
Save the current ADE-OS running configuration? (yes/no) [yes] ?
Generating configuration...
Saved the ADE-OS running configuration to startup successfully (code)
Cisco WAN :: Upgrading ASR 1000 Out Of Box?
Dec 9, 2012Looking for simple doc to follow for upgrade iOS image for Cisco Asr 1000. Not worried about downtime. New hardware not in production yet.
View 4 Replies View Related
