Purchased a new server. Want to carry over DHCP/DNS/DC/SHARES roles from current domain controller to new 2008 it's a small <20 users server. Is there a solid way to transfer Active Directory and Shares and such?maybe image over 2k3 to the 2008 server, and upgrade to 2008?
View 9 RepliesI am trying to copy IOS from my TFTP server which is on my laptop to cisco 2960 switch
I am able to ping to switch from my laptop, connectivity is fine, tftp server is running
Current Image on Switch --> C2960-LANBASE-MZ.122-25.SEE3.bin --> trying to upgrade to --> c2960-lanbasek9-mz.122-53.SE2
I am getting below error when trying to upgarde IOS:
2960-SW#copy tftp: flash:
Address or name of remote host []? 10.1.x.x
Source filename []? c2960-lanbasek9-mz.122-53.SE2
[Code].....
upgrading from our current WCS version to 7.0.230.0 (not going for NCS at the moment).
View 4 Replies View RelatedI'm trying to upgrade my WCS from 7.0.164.0 to 7.0.172.0 but it keeps throwing me into the manual process because it detects multiple versions. Seems a previous upgrade from 6.0.132 to 7.0.164 did dot remove the 6.0.132 directory or files.
Am I safe to delete the 6.0.132 directory/files and trying again?
I just upgraded from DIR 615 to DIR 655. I used the installation CD but I have no wifi signal detected. Wired connection with 655 works though. If I go back to 615, wifi works.
View 1 Replies View RelatedI need to upgrade our Wireless Lan Controller to support new APs. I was able to get the new code due to a security advisory on the code we are running now. I am upgrading from 6.0.196.0 to 7.0.220.0 (MD). I have read in some of the technical docs that the WCS has to match the WLC. I cannot find any documentation as to what this entails on the WCS.
WCS version is 6.0.132.0 running on Windows.
What are the prerequisites before doing this? I have to upgrade a router this week if there is an opportunity to move it to a code that is more current that the one the client is currently running which is 12.2(33)SRD4. I see on the Cisco Support site that after this code, everything moves to 15.
View 2 Replies View RelatedI'm planning on upgrading our wireless lan controllers and WCS. I would like to upgrade the controllers to 4.2.209 as our 1020 APs will not be supported by any later version, I think. And, I would like to upgrade our WCS to 6.0.181.0 so it's ready for when we upgrade our controllers to 6.x.x.x after we get some APs that can support it. Is the 6.0.181.0 on the WCS going to give me any problems monitoring or administering the controlllers if they are only 4.2.209?
The Cisco WCS release must be the same or more recent than the controller software release. Upgrade the Cisco WCS first to prevent any unexpected problems. Cisco WCS supports database upgrades only from the following official Cisco WCS releases: [code]
If I upgrade MSE with WCS, do I need only the file : Cisco-MSE-L-K9-7.0.201.204-64bit.bin. Or do I need to upload all the 4 database-installer files also ?
View 1 Replies View RelatedWhat are the prerequisites before doing this? I have to upgrade a router this Wednesday evening if there is an opportunity to move it to a code that is more current that the one the client is currently running which is 12.4(25b). I see on the Cisco Support site that after this code, everything moves to 15.
View 5 Replies View RelatedI am in the process of upgrading my 4402 to version 7.0.230.0 and am confused on the premise of the firmware and the bootloader. From what I currently understand, I can upgrade directly to the 7.0.230.0 firmware from my current 4.2.176.0, then I should upgrade to the latest bootloader image. But I have also seen posts where I should update the bootloader software to the latest version, then put on the latest firmware.
I have seen conflicting reports where I must step through each bootloader version, 4.x to 5.x to 6.x to 7.x to make sure I have all the fixes, but I have also seen instructions, where you can jump to the very latest and the fixes are cumulative.
I am currently running NCS 1.1.1.24 and trying to upgrade to prime 1.3, but running into some issues, i applied the patch ncs_patch-1.1.1.24-upgrade-12.tar.gz, but when i try to acutally upgrade i get the following...
admin# application upgrade PI-upgrade-bundle-1.3.0.20.tar.gz defaultRepo
Save the current ADE-OS running configuration? (yes/no) [yes] ?
Generating configuration...
Saved the ADE-OS running configuration to startup successfully (code)
Looking for simple doc to follow for upgrade iOS image for Cisco Asr 1000. Not worried about downtime. New hardware not in production yet.
View 4 Replies View RelatedI am managing a Cisco 881 with Adv Ip Services ( CISCO881-SEC-K9). It has IOS 15.0(1) M8 on it. I see that there is a new IOS version 15.2M&T that (I think is applicable), and I have read the upgrade procedures for upgrade via USB and TFT.
If I install it will my license for Adv Ip Services be preserved or overwritten. And if the latter, do I need to export it and reapply it? If so, what is the process?
Am I able to legally download and upgrade software versions still on ASA firewalls?I have not had an issue in the past as this has not effected the license.I cant find anything online saying that you cant due to Cisco's new Software license policy changes.
View 1 Replies View RelatedI have cluster of firewalls which inclueds AIP module and are in production. Due to some issue modules could not be activated. Now I need to activate and udate signature of them. So whether I can do all this activity without effecting my production (Zero downtime).
View 5 Replies View RelatedI am upgrading my home network, I am running cat 5 cables all around my house. currently I have a comcast cable modem and a netgear router. I will have about 20 cables coming in to my office (all the network equipment is already there) I know I will need a switch but I am not sure what kind. I will be upgrading my wireless router to a much better one, should I have the router get its internet connection from the switch or have the switch get the connection from the router. Will I need a firewall? I also have a web and ftp server running behind the router? how should I connect my server?
View 4 Replies View RelatedI currently have a 2 router setup working ( one in the office running a wire behind walls to my upstairs computer ) and have an internet speed of 35/35. We will be upgrading when fios comes out with the 150/65 plan and would like to upgrade our slave router as well. Currently it's a D-Link WBR-1310/RE 54mbps 802.11g router and we would like a router capable of handing the full 150/65mbps with wireless N capabilities.
View 1 Replies View RelatedI upgraded my router Linksys wrt54gl with dd-wrt and i can't connect to internet now. It was all good before. Im hitting my head fo past 5-6hours and cant figure it out.
View 1 Replies View RelatedI am upgrading from 7.0.116.0 to 7.2.110.0 to support the 3602 APs. Is it a different license to upgrade to 7.2.110.0 or can I directly upgrade to 7.2.110.0 without a new license?We currently have a 5508 base license.
View 1 Replies View RelatedCan you upgrade an ASA5505 remotely and can you add Anyconnect support (for mobile VPN access) in conjunction with a pre-existing VPN config (so not to interupt the Cisco VPN Client users)?
View 1 Replies View RelatedI have a wlc 5508 running version 7.0.116.0 that I need to uppgrade to use the CAP2602I AP. I understand that I need to upgrade it to version 7.0.240 before 7.4.100 to avoid loosing HREAP VLAN mappings, and I have also read that i need to install the FUS image [URL]. In what order should this be done? Shlod the FUS image be installed before new firmware ore after firmware or after 7.0.240 but before 7.4?
View 1 Replies View Relatedi recently upgraded our Ciscoworks LMS from 4.0 to 4.1. after i installed the upgrade the admin login doesnt work, neither does any other account. i have tried resetting the password but it doesnt work.
View 3 Replies View RelatedWe are in the middle of upgrading from two PIX's to some new ASA5512X's. To give you some background on the situation we are upgrading these since the PIXs are fairly old. We had one extra that we had to use since one PIX has failed already. The guy that implemented the PIXs orginally was learning how to do so as he went so there is alot of needless config in the PIX, atleast from what I can tell. Another guy that works with me has done some configuration on the new ASAs and has done the majority of it so far. Today we went to install the new ASAs and switch everything over hoping it would work, but that didn't happen. It seems that there is something wrong with our NAT and ACLs somewhere along the lines. The way our network is laid out is that we have two school campus with a site-to-site VPN one is 172.17.0.0/16 and the other is 172.18.0.0/16. We also have a remote-access VPN on both ASA's. When we connected the new ASAs up and brought up the interfaces, nothing on the inside could ping the internet nor the other side. The VPN showed active on the ASA's and each ASA could ping the others outside interface, but that was it. I have posted the configs below.
ASA1:
: Saved
: Written by enable_15 at 04:26:18.240 CDT Tue Mar 12 2013
!
ASA Version 8.6(1)2
[Code].....
I have 100 nos of cisco 1130AG access points and I upgraded the ios for one of the access point.
the existing image is c1130-k9w7-tar.124-21a.JA1
upgraded image c1130-k9w7-tar.124-25d.JA.
what is the advantage of upgrading the ios.and i want to upgrade the image to all the access points at time?
We are about to upgrade Cisco Load Balancer CSS 11501 firmware from current ver, 8.10.4.01 to 8.10.6.02,this is a production line device (a running 24x7 network), upgrading will create unpredictable results even worst the network will go down.
View 1 Replies View RelatedI are currently implementing a new patching schedule (when I say new i mean a company first!!!) and I have identified that the firewalls are all running 8.2(2). I would like to bring these up to the latest version but am a little worried about impact!!! I have setup a test firewall with the config from our live asa's and run the upgrade but have received multiple lines.
View 9 Replies View Relatedif we are upgrading from lms 3.1 to 3.2, can we use the same license file of 3.1?
View 4 Replies View RelatedWe are working for a client move from PIX 525 to ASA 5585-X, SSP10. This is a production environment and very critical migration. What are the gotchas which we should be aware off?
View 1 Replies View RelatedI need ot upgrade a Cisco PIX 515 E to A Cisco ASA (not sure what type and modle yet!). the PIX currently has about 80 lines of ACLs and no VPNs. So only inside and outside interfaces and 80 lines of ACLs to be transferred over to the ASA.I was wondering if the ACLs can be transferred over to ASA as is?is there anything that I need ot watch for?
View 1 Replies View RelatedIs it possible to upgrade the flash on the 3750's? We have the older 3750 (WS-C3750-48P-S) only has 15998976bytes flash...
View 1 Replies View RelatedI have just purchased a used 2610XM router for use at home for preparing for the CCNA Security certification.The router came with IOS 12.2xxx.
I've been told that in order to get SDM, which is a big part of the cert test, I need to upgrade to 12.4xxx IOS.I've purused the Cisco site looking for the correct IOS, but there are multiple versions of the 12.4 IOS.
My question is this: which flavor of 12.4 IOS should I d/l?? And does SDM come incorporated WITHIN the IOS, or is that a separate d/l?
Upgrading from cisco LMS 3.0 to a higher version.
Whatdoes it require?. What is the current version? What do we need for upgrading? Are there specific codes or new need to buy new products? In case of buying new products, which are the configurations?