Cisco WAN :: Upgrading IOS On 2610XM Router From 12.2xx To 12.4?
Mar 15, 2011
I have just purchased a used 2610XM router for use at home for preparing for the CCNA Security certification.The router came with IOS 12.2xxx.
I've been told that in order to get SDM, which is a big part of the cert test, I need to upgrade to 12.4xxx IOS.I've purused the Cisco site looking for the correct IOS, but there are multiple versions of the 12.4 IOS.
My question is this: which flavor of 12.4 IOS should I d/l?? And does SDM come incorporated WITHIN the IOS, or is that a separate d/l?
View 5 Replies
ADVERTISEMENT
Mar 3, 2012
I have a Cisco 2610XM (256MB DRAM / 48MB FLASH) set up as a WAN router, routing from FA 1/0 to FA 0/0 FA 1/0 is a dhcp client and FA 0/0 is a dhcp pool server.Everything works fine except my router is capping out at about 8MB/s download speed.This would be fine except i have a 16Mb/s internet connectionIs this just the router hardware bottlenecking? or a configuration issue?Either way could you let me know how to solve this?
View 3 Replies
View Related
Dec 21, 2012
Im trying to get into Rommon, Im reading thats the BREAK button, which im assuming obviously its the pause/break button on my keyboard, im pressing it till my finger turns blue a billion times and still no rommon noodles for me.
View 3 Replies
View Related
Feb 18, 2011
I`m having problem with booting Cisco router 2610 and I`m having this message :
C2600 platform with 131072 Kbytes of main memory
Program load complete, entry point: 0x80008000, size 0x439138
Self decompressing the image :####################################################################################################################################################################[OK]
After that, I can't type any thing?
View 3 Replies
View Related
Apr 2, 2012
I've a home lab which consists of three 2610xm routers and I have configured two routers back to back with FR subinterfaces. The commands are used are;
R1
frame relay switching
int s0/0
encap FR
no sh
clock rate 64000
frame-relay intf-type dce
[code].....
Everything works great with this config and I know how to configure without lmi too. My question is more for the CCNA exam and fill the gaps in so to speak. The question is when you configure FR with static mappings and inverse arp do you need actual frame relay switches on the other side of the link or can I configure on my home labs routers. I know I am gonna try and configure this as well, but can I configure multipoint on my third router with a different physical interface. Like R1 with s0/0 to R2 s0/0 and R1 s0/1 to R3 s0/0 with subinterfaces.
View 2 Replies
View Related
Jun 2, 2010
clarify if the NM-1FE2W or NM-2FE2W will work in the 2610XM? These two pages seems to contradict each other:
[URL]
I've an option on some 2610XM's cheap for my lab, but I need to have 2FE ports in each. Some people have told me the NM-1FE2W and NM-2FE2W will work in the XM's and some others have said they wont!
View 5 Replies
View Related
Jun 12, 2012
I currently have a 2 router setup working ( one in the office running a wire behind walls to my upstairs computer ) and have an internet speed of 35/35. We will be upgrading when fios comes out with the 150/65 plan and would like to upgrade our slave router as well. Currently it's a D-Link WBR-1310/RE 54mbps 802.11g router and we would like a router capable of handing the full 150/65mbps with wireless N capabilities.
View 1 Replies
View Related
Jan 2, 2013
I've been using my WRT54G for at least 4 years if I'm not mistaken. I've never had any issues with it at home. I use it to connect my i Pad, iPhone, Mac Book, and XBOX 360 (wired). My question is should I just leave it as is or will I see any performance gain on upgrading my wireless home router? I eventually would like to get 6-10 IP wired cameras for home CCTV system.
View 5 Replies
View Related
Apr 3, 2012
Basically I run 3 voice gateways on 2821 routers. In two of my routers I've had fan failures, one router has had two fans die and one has had just the one.
I was going to buy the offical Cisco fan replacement kit but then I thought with such as high failure rate I'd rather buy something else and better guarentee the service to my call centres.
So, what i'm asking is:
- Is there any reason why I cannot procure a standard 80mm 12V fan with a better rating (cooling and reliability) and install this in my 2821's?
I understand this may invalidate any warranties but mine have long expired.
View 1 Replies
View Related
Mar 14, 2009
I'm trying to upgrade the firmware on my BEFSR81 v3 cable router (firmware version 2.45.xxx) on a Mac. I accessed the interface via Safari browser, followed the instructions, got a message saying not to interrupt the process, but it never completed. So I tried it again (downloaded another copy of the firmware update), and same thing. No choice but to interrupt it. My internet connection seems to be working fine, but now I can't access the router via the browser. I don't think the firmware actually updated.
Should I power down the router and then reset it?
View 3 Replies
View Related
Feb 5, 2013
I currently have an old Linksys WRT160n.How does upgrading to the EA3500 benefit me? How does this differ than my current router which is still wireless N? I know it is Dual band but does that really matter?If my ISP provides me with 10 Mbps does it really matter what router I go with? How exactly does it speed up gaming/netflix/etc?
View 9 Replies
View Related
Mar 28, 2011
Did anybody ever succeeded upgrading 1.3.12.19-tm to 4.0.0.07-tm version?
View 1 Replies
View Related
Feb 19, 2013
I wan to migrate from a router 2800 to L3 switch 3750G , the thing is that we have several vlans and we use a router sometimes with each interface configure with correspoinding vlan subnet ip to route traffic between vlans there is no static or dynamic routing only directly connected interfaces on router routing traffic to each other ?How would i configure a L3 switch interface for simillar functionality , below is my current router configuration
!
ip domain name yourdomain.com
multilink bundle-name authenticated
!
vtp mode transparent
[code]...
View 15 Replies
View Related
Jan 23, 2012
I'm attempting to upgrade to firmware 5.00.38 for my WRT54G-TM router, but it keeps telling me "upgrade failed" after like 3-4 seconds of trying. It says I currently have firmware: DD-WRT v24-sp2 (06/13/09) mega - build 12288. I've tried restetting to factory defaults before upgrading, but doesn't work.
View 1 Replies
View Related
Jan 3, 2012
I have a little problem with my new E1200. Before the E1200 I had a WRT160N that was bricked to death by a power surge due upgrading the firmware. Till that moment the WRT160N met al the required specs as told in the description..I have from my ISP a 40Mbit cable line and was always downloading at those speeds wired aswell as wireless...
Now with the E1200 I get the 40Mbit only wired... wireless it only allows it up to max. 20Mbit.I figured that I didn't do anything different than the Linksys I had before..I'm working with a MacBook from late 2007 running OSX Lion 10.7.2, Built-in AirPort Extreme card (802.11a/b/g/n)My wireless setting with a WP2 Personal Security Mode
View 6 Replies
View Related
Mar 2, 2012
I recently upgraded my d-link router DI-524 for Netgear N600 WNDR3700v3 and every component (wired or wireless) is working except network printer. I have it wired directly to the router and all pcs on the home network can see it, however when i select to do a test print, nothing prints to the printer and i get error. I had this setup using the d-link router with both the printer and the XP PC wired directly to the router and using the XP PC as a network pc sharing the printer to other pcs (Vista / Windows 7) on the home network.The printer is a Toshiba e-studio 160 series.. I re-added the print drivers for XP and still not able to print. Is there anything else I can try?
View 9 Replies
View Related
Jan 22, 2012
After unsuccess firmware upgrade, my router is leds always light.How I can recover it?
View 3 Replies
View Related
Jan 2, 2012
Video streaming was fine until I upgraded the firmware. Is it possible to downgrade the firmware?
View 3 Replies
View Related
Sep 16, 2010
I just upgraded to a E3000 from a WRT54G and I am having some issues with network speed.I have no special settings and have even tried restoring factory defaults and upgrading to the latest firmware to no avail.The time I notice the biggest hit is when transferring files locally on the network (WiFi and LAN).Let me note that I do know the difference between MB/s & Mb/s and the like.I have Comcast 20Mb/s Down, 1.5Mb/s Up (just a FYI, the main issue is local transfers)
With default settings my Laptop (ASUS N82JQ, Atheros AR9285 Wireless Network Adapter), connects to the router at only 65Mb/s (with full signal).Upload seems to be more decent ~600KB/s (Transferring files from wireless n laptop to the gigabit desktop).Download seems to be limited to ~150KB/s (Copying files from the wired gigabit desktop to the wireless n laptop).These speeds are horrible! ~5hrs to transfer 3GB of data!
One of my laptops had a card that was capable of both 2.4 & 5Ghz and I was previously getting ~2000-5000KB/s (2-5MB/s) transfers with this router (But I had to do a system restore on it and reset the router). My ASUS laptop seems to only work with 2.4Ghz though. If I change the 2.4Gh Wireless settings on the router to "Auto(20MHz or 40MHz)" the laptop will connect at 150Mb/s, but the speeds are the same slow speeds as above.
View 9 Replies
View Related
Nov 22, 2012
upgrading from our current WCS version to 7.0.230.0 (not going for NCS at the moment).
View 4 Replies
View Related
May 18, 2011
I'm trying to upgrade my WCS from 7.0.164.0 to 7.0.172.0 but it keeps throwing me into the manual process because it detects multiple versions. Seems a previous upgrade from 6.0.132 to 7.0.164 did dot remove the 6.0.132 directory or files.
Am I safe to delete the 6.0.132 directory/files and trying again?
View 5 Replies
View Related
Mar 9, 2012
I need to upgrade our Wireless Lan Controller to support new APs. I was able to get the new code due to a security advisory on the code we are running now. I am upgrading from 6.0.196.0 to 7.0.220.0 (MD). I have read in some of the technical docs that the WCS has to match the WLC. I cannot find any documentation as to what this entails on the WCS.
WCS version is 6.0.132.0 running on Windows.
View 7 Replies
View Related
Jan 15, 2012
What are the prerequisites before doing this? I have to upgrade a router this week if there is an opportunity to move it to a code that is more current that the one the client is currently running which is 12.2(33)SRD4. I see on the Cisco Support site that after this code, everything moves to 15.
View 2 Replies
View Related
Jan 30, 2011
I'm planning on upgrading our wireless lan controllers and WCS. I would like to upgrade the controllers to 4.2.209 as our 1020 APs will not be supported by any later version, I think. And, I would like to upgrade our WCS to 6.0.181.0 so it's ready for when we upgrade our controllers to 6.x.x.x after we get some APs that can support it. Is the 6.0.181.0 on the WCS going to give me any problems monitoring or administering the controlllers if they are only 4.2.209?
The Cisco WCS release must be the same or more recent than the controller software release. Upgrade the Cisco WCS first to prevent any unexpected problems. Cisco WCS supports database upgrades only from the following official Cisco WCS releases: [code]
View 2 Replies
View Related
Sep 5, 2011
If I upgrade MSE with WCS, do I need only the file : Cisco-MSE-L-K9-7.0.201.204-64bit.bin. Or do I need to upload all the 4 database-installer files also ?
View 1 Replies
View Related
Apr 10, 2011
What are the prerequisites before doing this? I have to upgrade a router this Wednesday evening if there is an opportunity to move it to a code that is more current that the one the client is currently running which is 12.4(25b). I see on the Cisco Support site that after this code, everything moves to 15.
View 5 Replies
View Related
Apr 7, 2012
I am in the process of upgrading my 4402 to version 7.0.230.0 and am confused on the premise of the firmware and the bootloader. From what I currently understand, I can upgrade directly to the 7.0.230.0 firmware from my current 4.2.176.0, then I should upgrade to the latest bootloader image. But I have also seen posts where I should update the bootloader software to the latest version, then put on the latest firmware.
I have seen conflicting reports where I must step through each bootloader version, 4.x to 5.x to 6.x to 7.x to make sure I have all the fixes, but I have also seen instructions, where you can jump to the very latest and the fixes are cumulative.
View 2 Replies
View Related
Mar 13, 2013
I am currently running NCS 1.1.1.24 and trying to upgrade to prime 1.3, but running into some issues, i applied the patch ncs_patch-1.1.1.24-upgrade-12.tar.gz, but when i try to acutally upgrade i get the following...
admin# application upgrade PI-upgrade-bundle-1.3.0.20.tar.gz defaultRepo
Save the current ADE-OS running configuration? (yes/no) [yes] ?
Generating configuration...
Saved the ADE-OS running configuration to startup successfully (code)
View 1 Replies
View Related
Dec 9, 2012
Looking for simple doc to follow for upgrade iOS image for Cisco Asr 1000. Not worried about downtime. New hardware not in production yet.
View 4 Replies
View Related
Sep 25, 2012
I am managing a Cisco 881 with Adv Ip Services ( CISCO881-SEC-K9). It has IOS 15.0(1) M8 on it. I see that there is a new IOS version 15.2M&T that (I think is applicable), and I have read the upgrade procedures for upgrade via USB and TFT.
If I install it will my license for Adv Ip Services be preserved or overwritten. And if the latter, do I need to export it and reapply it? If so, what is the process?
View 3 Replies
View Related
Jan 17, 2011
Purchased a new server. Want to carry over DHCP/DNS/DC/SHARES roles from current domain controller to new 2008 it's a small <20 users server. Is there a solid way to transfer Active Directory and Shares and such?maybe image over 2k3 to the 2008 server, and upgrade to 2008?
View 9 Replies
View Related
Feb 13, 2012
Am I able to legally download and upgrade software versions still on ASA firewalls?I have not had an issue in the past as this has not effected the license.I cant find anything online saying that you cant due to Cisco's new Software license policy changes.
View 1 Replies
View Related
Apr 8, 2013
I have cluster of firewalls which inclueds AIP module and are in production. Due to some issue modules could not be activated. Now I need to activate and udate signature of them. So whether I can do all this activity without effecting my production (Zero downtime).
View 5 Replies
View Related
