Cisco :: Flash And RAM Installed In WLC 4402?
Feb 9, 2011I am looking around hwo to know the flash and ram installed in WLC 4402? try looking any command, sh ver not there. even in WCS.
View 2 Replies
ADVERTISEMENT
Cisco Switching/Routing :: 6509 Copy Sup Boot Flash To ATA Flash
Feb 26, 2012Trying to copy the system image file from the sup-bootflash to a new 64MB ATA flash card. Yes the software can support the 64MB card.
The ATA flash card was formated successfully, however I cannot copy the system image to it so that it can boot after a power loss.
The command I tried was: console(enabled) copy sup-bootflash: slot0:
The source filename was typed in as shown in the Show Verison command.The result was: Error opening slot0: no such device.I suspect that I am missing something obvious as I am new to Cisco Switches.
Cisco :: Copy Tftp Flash And Copy Flash Tftp Not Working?
Jul 19, 2011I am using TFTPD32 to upgrade the IOS on a router. When I type in the commands copy tftp flash and enter all the necessary information, the router sits for a minute or so and then times out. There is no entry made in the log when it times out. copy flash tftp yields the same result. The fa 0/0 interface and the TFTP server are both on the same subnet and can successfully ping one anothe
View 16 Replies View RelatedCisco WAN :: 819 Lost Everything On Flash
Aug 3, 2012First some info:
System image file is "flash:c800-universalk9-mz.SPA.152-4.M1.bin"
Cisco C819HG+7-K9 (revision 3.0) with 492620K/31667K bytes of memory.
[code]....
The strange thing is....I have a running-config if i ssh to it. but according to my flash: there is only my IOS.BIN. How is that working?
Where the latest working image can be found. because Cisco states the the one right now i the right..but still i cant see cellular 0 in CCP
Cisco :: Difference Between NVRAM And Flash
Aug 15, 2011what physically distinguished NVRAM from EEPROM (flash)? What type of memory is used for "firmware"
View 1 Replies View RelatedCisco :: Upgrading The Flash On The 3750?
Oct 1, 2012Is it possible to upgrade the flash on the 3750's? We have the older 3750 (WS-C3750-48P-S) only has 15998976bytes flash...
View 1 Replies View RelatedCisco WAN :: IOS For 2610 Router With 4MB Flash?
Jan 15, 2011I erased my flash and cannot locate an IOS that will fit on my 2610 router, I was running 11.3(7), but cannot locate anything even close.
View 3 Replies View RelatedCisco WAN :: 3725 - 4GB Compact Flash
Sep 4, 2012I have a 3725 router and would like to upgrade the slot:0 compact flash to a higher capacity. My question is, I can just pick up a 4GB compact flash card from walmart, or do I have to have a card from Cisco?
View 2 Replies View RelatedUpload Flash From A Sever?
Jun 13, 2012I want to upload flash from a sever, as if I was uploading with flash, instead of a browser. I was told something about rfc..(Flash download request)Anyways, is their any sites, etc, that I can use?
View 2 Replies View RelatedD-Link DIR-825 / Getting Very Poor Flash?
Feb 5, 2011I run a DIR-825 as an access point on my home network and I upgraded the firmware from 2.03Na to 2.05NA and it looks like it was a poor flash. Orange Amber power light, no wireless radios, unable to access it via its configured ip or default (192.168.0.1). It will not respond to pings, give arps, or obviously the web browser session.Is there any way to reflash these things manually or do I have to send it in?
View 2 Replies View RelatedCisco :: Can't Format Compact Flash 512MB?
Aug 4, 2011cant format compact flash, 512MB,at boot is says
Loading disk0:/asa841-51-k8.bin... Booting...
Platform ASA5510
Loading...IO memory blocks requested from bigphys 32bit: 13008 dosfsck 2.11, 12 Mar 2005, FAT32, LFN
here ---> Currently, only 1 or 2 FATs are supported, not 64.
dosfsck(/dev/hda1) returned 1
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
open /dev/hdb1:No such file or directory
dosfsck(/dev/hdb1) returned 1
mount: mounting /dev/hdb1 on /mnt/disk1 failed: No such file or directory
mount: mounting /dev/hdb1 on /mnt/disk1 failed: No such file or directory Processor memory 868220928, Reserved memory: 62914560
what does this mean?Currently, only 1 or 2 FATs are supported, not 64.
Cisco Firewall :: Pix 515 - To Erase Flash Memory
May 12, 2011Need this file to erase my flash memory?
View 2 Replies View RelatedCisco WAN :: Flash In Router 2811 Without Enough Space
Feb 15, 2011I am trying to upgrade a router 2811, the flash has 64 mb and currently has a IOS 32 mb, but require update it with a IOS 37 mb.
What should I do?, I cannot have the two ios in the flash.
Cisco WAN :: 3800 Router Flash Upgrade?
Jul 14, 2012I need to upgrade compact flash memory card for a 3800 router. Basically i want to upgrade code on this router and the current flash size (64Mb) cannot hold new image. I wanted to check if i swap the old flash (64 Mb) with a new one 256 mb, i will loose vlan.dat file since it's stored in flash. Is there a way i can copy vlan.dat to new flash which has new code before i change the boot statements and reload the router?
View 1 Replies View RelatedCisco WAN :: WS-C3750G-24T 16Mb Flash Switch?
Apr 25, 2013I have this WS-C3750G-24T 16Mb flash switch and running on IOS Version 12.2(25)SEE4, RELEASEI would want to know a IOS version that supports IP SLA feature and which is compatable to the above model Switch.
View 3 Replies View RelatedCisco Firewall :: ASA 5525-x Flash Memory
Nov 14, 2012We have a customer that has a ASA 5525-x reporting only 4g flash memory rather than 8g has any 4g version of the 5525 or is the IOS reporting incorrectly the size, as it seems to be embedded on these units as a USB disk internal.
View 4 Replies View RelatedCisco WAN :: Memory / Flash Upgrade For C2801
Feb 25, 2012Currently I have C2801 with 256MB of memory and 64MB of flash. I want to upgrade it to 384MB / 128MB.Do I need to get MEM2801-256D or I can use any PC133 SDRAM (144PIN) for memory? 384 is maximum I can install? Do I need to get MEM1800-128CF or I can use any compant flash card? 128MB is maximum I can install? (I saw 256MB flash on for C2801)
View 10 Replies View RelatedCisco Wireless :: Flash Image For Air BR1310G-A
Dec 22, 2012I purchased a used AIR BR1310G-A--K9-R from a local high school that was rebuilding their athletic field. The AP was used for communications for their pressbox staff. The AIR BR1310G was part of the schools campus wide WiFi network and was upgraded to an lwapp image c1310-k9w8-m 12.4 3c JA. Our home sits on a large lot and I would like to convert the BR1310G back to an autonomous AP.
In order convert it back to an automonous AP, I will need the original image. The school used a contractor for their WiFi network and they do not have a backup of the original image. I do not have a service account with Cisco so downloading the autonomous image from the Cisco website is out. What are my options for either obtaining an image file or using the current managed image without a WLC?
Cisco WAN :: 2821 - Compact Flash / IOS Upgrade?
Sep 25, 2012I need to upgrade the compact flash memory on a 2821 router from 64 to 128, upgrade the ios, and re-script the router. So I'm wondering what is the correct sequence? With the router powered on, do i eject the existing flash, and install the new one or do I power down the router? Once the memory has been increased, then i can upload the new ios?
View 1 Replies View RelatedCisco Security :: PIX 501 Flash Image Download
Jun 23, 2011I have a PIX 501 and I am looking to download an OS as my current image is corrupt and the PIX will not boot. Where I can download the O/S from so I can tftp it across to the router.
View 1 Replies View RelatedCisco Firewall :: ASA5520 External Flash For 8.4
Apr 6, 2011I am in the process of setting up the ASA5520 with the latest 8.4 firmware latest Anyconnect 3.0.
Unfortunately, the internal memory is sufficient enough for the ASA ASDM only. It says not enough memory when I tried to tftp the Anyconnect pkg.There is a external flash slot at the back of the ASA, I've inserted a 256mb CF card but when I do a show disk1: it shows
Cisco Application :: Flash Memory For ACE 4710?
May 13, 2012if there is a Flash Memory upgrade option for the ACE4710 that they have.He says he needs more memory so that he can have two images on flash at once. From what I can find, there does not seem to be an upgrade option to increase the flash from the 1 Gig that comes with the platform.
View 1 Replies View RelatedCisco Firewall :: ASA 5550 - Cannot Copy IOS From Flash To PC
Jan 8, 2013I just got a brand new ASA 5550, i configured the port g0/0 on asa with an ip address 192.168.10.1 then configure my computer with ip 192.168.10.2 and default gateway is 192.168.10.1. I'm able to ping the asa from my computer. I remote to ASA thru the console port and try to copy iOS from flash to my pc but it doesn't work.
Cisco asa# copy flash tftp://192.168.10.2/asa804-k8.bin
Source file name []? asa804-k8.bin
Address or name of remote host [192.168.10.2]?
Destination file name [asa804-k8.bin]?
Writing file tftp://192.168.10.2/asa804-k8.bin...
!%Error writing tftp://192.168.10.2/asa804-k8.bin (Timed out attempting to connect)
Cisco asa#
Cisco Firewall :: Flash Upgrade ASA5520
Jan 11, 2012I am needing to upgrade the Flash card on our current ASA from 64mb to a 1GB card to make way from upgrading from 8.0 to 8.4. When i copy all the contents from the 64MB card through a card reader i am not getting the startup-config file copied over. I checked to make sure that all hidden files are shown, but i am not seeing it. I backed up the startup-config from the old 64mb card to a tftp server before switching the cards out. Is their something that i am missing?
View 4 Replies View RelatedCisco VPN :: Adding Compact Flash To ASA 5520?
Jun 5, 2012I am attempting to install a 512 MB Cisco COmpact Flash for an ASA 5520. We have inserted the compact flash but when we do a DIR, it does not show. even as an unformatted device.
What do we need to do to make this a usable CF? Do I just need to reload the ASA or do I need to format the CF. It has been inserted into the slot in the back of the ASA 5520 and we have ensured that is had been seated properly.
Broadband :: Tcp Ip Not Installed
Jul 27, 2011i am using bsnl broadband connection.when i want to connect to internet it is saying that TCP/IP NOT INSTALLED.DISABLE E-MAIL SCANNING IN YOUR SEMANTIC PRODUCT 1003,3. so i removed the semantic anti product. still internet is not connecting. what shall i do?
View 1 Replies View RelatedCisco AAA/Identity/Nac :: Cannot Access ACS 5.3 Installed In VM
Dec 13, 2012I installed ACS 5.3 on a VM machine for evaluation. The install went fine as I used the recommended settings in the install guide. All the services are up and running when I issue the "show application status acs" command. I am trying to access the web page via http://192.168.1.199:2002 and it just times out. I can ping the server and the server can ping my machine.
View 2 Replies View RelatedCisco VPN :: No Traffic Goes Out When 5510 Installed
Jul 5, 2012Main office has a ASA 5520, new office has a ASA 5510. Problem is no traffic goes out when the 5510 is installed, no internet no network connection to servers.I have both config files attached.
View 9 Replies View RelatedCisco AAA/Identity/Nac :: Getting Certificate Installed - ACS 5.2
Jun 14, 2011Currently I'm using a self signed cert issued by ACS. We are having an issue where occasionally we see in our Windows 7 logs that Windows did not like the self signed cert from ACS when doing dot1x authentication for our Windows 7 clients. We are using the built in dot1x client that comes with Windows and have the "Validate Server Certificate" unchecked but still see this error occasionally. I've tried issuing a CSR from the ACS server and going to Thwate and getting a test cert but everytime I paste the CSR into the field at Thwate I get an error about invalid cert type. You have to choose from a list of server types. I've tried several different ones. I've also tried issuing the request from a WIndows server and when I try and import the files I get a invalid key error. How to get certificate working from Thwate or Verisign?
View 6 Replies View RelatedCisco :: WLC 4402 - Which Version Of WCS To Use
Dec 4, 2011I am running a WLC 4402 with software version 6.0.182.0. Which WCS version should I use or does it matter?
View 5 Replies View RelatedCisco :: Upgrading WLC 4402 From 4.2.176.0 To 7.0.230.0?
Apr 7, 2012I am in the process of upgrading my 4402 to version 7.0.230.0 and am confused on the premise of the firmware and the bootloader. From what I currently understand, I can upgrade directly to the 7.0.230.0 firmware from my current 4.2.176.0, then I should upgrade to the latest bootloader image. But I have also seen posts where I should update the bootloader software to the latest version, then put on the latest firmware.
I have seen conflicting reports where I must step through each bootloader version, 4.x to 5.x to 6.x to 7.x to make sure I have all the fixes, but I have also seen instructions, where you can jump to the very latest and the fixes are cumulative.
Remove Viruses From Flash Disk USB?
Aug 20, 2012How can I remove viruses from my flash disk USB
View 1 Replies View RelatedFlash Player 7 64 Bit Download For Firefox?
Aug 27, 2011my firefox doesnot play flv in web,what do i have to do
View 1 Replies View Related