We have a customer that has a ASA 5525-x reporting only 4g flash memory rather than 8g has any 4g version of the 5525 or is the IOS reporting incorrectly the size, as it seems to be embedded on these units as a USB disk internal.
View 4 RepliesNeed this file to erase my flash memory?
View 2 Replies View RelatedI recently upgraded the flash and the RAM on one of my ASA 5505 lab machines. The flash was upgraded from 128 to 512MB and the RAM was also upgraded from 256 to 512MB. I am using asa845-k8.bin. The firewall boots and runs file until you issue the reload command. The system shuts down but never reloads.
View 11 Replies View RelatedCurrently I have C2801 with 256MB of memory and 64MB of flash. I want to upgrade it to 384MB / 128MB.Do I need to get MEM2801-256D or I can use any PC133 SDRAM (144PIN) for memory? 384 is maximum I can install? Do I need to get MEM1800-128CF or I can use any compant flash card? 128MB is maximum I can install? (I saw 256MB flash on for C2801)
View 10 Replies View Relatedif there is a Flash Memory upgrade option for the ACE4710 that they have.He says he needs more memory so that he can have two images on flash at once. From what I can find, there does not seem to be an upgrade option to increase the flash from the 1 Gig that comes with the platform.
View 1 Replies View RelatedI have a cisco 2821 router configured as a CME version 7.1. Now I want to upgrade the IOS to version 15 to get a CME version 8.6 but I faced a problem that the flash of the 2821 is 64MB and the IOS version 15 required flash 128MB. I tried to replace this flash with another 128MB installed on Cisco 2811 router but when I installed the 128MB flash on the 2821 CME the 2821 didn't boot from it.
View 5 Replies View RelatedI read that there are internal and external flash memory in 3725 router that can max up to 128mb. So adding the sizes of internal and external flash memory, will that total to 256mb?
And also is the internal flash of 3725 just the same with its external flash?
When I try to copy ios to one flash in router 2801, I receive the message of of insufficient memory, and have the follow out in the next command: [code] This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately.
View 6 Replies View Relatedthe problem shows an error in a switch catalyst 2900XL - its a 2924 -, i was copying the image of the ios via xmodem and before finished the the power energy in the facility shuts down, when the energy supply returns the switch get power energy normally but the flash memory doesn't initialized and the loader stuck when i try to initializy the flash or reset
this is the error that shows me:
switch: flash_init
Initializing Flash...
flashfs[0]: 21 files, 2 directories
[Code]....
I just read the Removing and Installing CompactFlash Memory Cards in Cisco 2800 Series Routers instructions and there was nothing said regading powering down the router. Are these CompactFlash cards hot swappable??
View 2 Replies View RelatedI have read that it is possible to migrate from a 525 to an ASA via a upgrade to pix asa version 7.0 then using the migration tool once copied to the new ASA 5500 series, but i have alos read in a forum somewhere that a migration from PIX to ASA 5500-x series is not possible,, is this true ?
View 1 Replies View Related We have recently installed new 5525 8.6(1) ASA's. Our setup is like; where we are using Public IP for web server, which needs to be mapped/natted to internet VIP address and that VIP is configured on F5 LB. Setup is below; This Public IP is the web server IP. The firewall get hits, but web server page is not being displayed. In the logs FW built tcp but then tear down the session, syslog id (302014) 77 TCP Reset-I
|INTERNET|
|
|
195.201.55.X
[ ASA ]
Natting to
10.100.100.151
[ F5 ]
|
/
/
Real Servers---> .150 .151
NAT Config is; nat (DMZ1,OUTSIDE) source static 10.100.100.151 195.201.55.X.
May I know how to configure for remote accessing ASA 5525 via ssh?I have issued the following commands
ssh 10.60.0.0 255.255.0.0 outside
ssh 10.60.0.0 255.255.0.0 dmz
ssh 10.60.0.0 255.255.0.0 inside
ssh timeout 5
but I am not able to access ASA via ssh. Do I need to add any other command
I have a PIX 515 with version 8.0(3). We buy a ASA 5525-X for replace the PIX.
The question is, what is the better method to migrade the configurations? Manually?
What is the better version for 5525-X? 8.6.1?
We have a 5525 that has not been deployed to production yet so we're using it in the lab. I want to lab some upgrades from 8.2 to 8.6 for some customers but the 5525 comes loaded with 8.6. Would there be any problem with reimaging the 5525 with 8.2? I'm just not sure if there would be an issue with this new hardware running that old software.
View 3 Replies View RelatedI'm about to upgrade from an ASA5520 to ASA5525.
View 1 Replies View RelatedWe've just replaced our Fortinet Firewalls with 5525's but are struggling to get a feature working that worked great on the Fortinet firewall.All our users use a proxy for internet access that's configured in IE but from time to time some users need to remove this proxy and go directly out to the internet, with the Fortinet devices we created a rule right at the bottom of the inside access out rule that had it authenticate users via TACACS which worked a treat and could be used from PC or laptop. We want to do a similar thing on the 5525 and I thought the Authenticated user would give me this access but I don't seem to be able to get it to work. I've got the AD side of it working fine the ASA can pull user and groups from AD but I'm struggling to get this working for a user.
View 3 Replies View RelatedWe are using MS System Center Operations Manager to monitor network devices. We are trying to monitor our Cisco ASA 5525-X firewall interfaces.
We have a generic management pack installed that seems to work for parts of the 5525. We can see performance info for IF-4 but none of the other interfaces.
Our Management Pack is a generic Cisco Adaptive Security Appliance Version 9.1(1) management pack.
Is there a management pack that is specifically for this Cisco firewall?
I am in the process of upgrading a client's firewalls from 5520s to 5525-Xs. I have 2 independent firewalls that are merging into a single firewall. Both of the source ones have a TON of user accounts defined for remote user VPN, is there any way to move these user accounts with passwords in tact?? The goal is not to have to tell the 250+ users that they need to reset their passwords at once.
View 2 Replies View RelatedIs there a module or way to create a Guest Access Lobby on the ASA 5525? We currenly leverage the WLC to do this for us, but are moving to a routed access enviornment which is causing some issues. We would like to offload the guest access responsibility to the ASA if possible.
View 1 Replies View RelatedWe are suffering an issue with ASDM 7.1(1) on a 5525-X with 9.1(1) software. In the Configuration --> Interfaces window, I can modify parameters on physical interfaces, I can modify parameter on subinterfaces, but I cannot create new subinterfaces or Etherchannels through ASDM.
When I create a subinterface, entering all parameters, interface name, vlan id, security level, etc., then I click on "Apply" button and nothing happens. It doesn't send anything to ASA. If I click on another window, ASDM ask for applying changes, I click on it, but nothing is applied and window doesn't change. It happens only when creating new interfaces. If I create them through CLI, then I can modify parameters without any problem.
I have tried re-installing java and I have tested with 6.31, 7.9, 7.11, 7.17 Java versions, from Windows XP, Windows 2003 Server and Windows 7 computers with same issue. Also with Linux Mint distro with IcedTea Java.
I recieved my IPS module license for my ASA 5525 . I enetered the key via the ADSM and it prompted me to restart the firewall .. After that i cannot get into the firewall via the ASDM .
View 3 Replies View RelatedI need to setup an ASA 5525 in Active/Standby failover mode. I am setting up the ASA for a company that purchased only one public IP address. The public IP address is assigned to the outside interface. My question is will failover work correctly if I don't use a secondary IP address on the failover configuration on the outside interface?
View 4 Replies View Related We have an ASA 5525 running version 8.6(1)2 and a 10 MG pipe. I have execs that want to limit bandwidth on users for stuff like youtube, stream media, and downloads. I found the article on ‘Bandwidth Management(Rate Limit) Using QoS Policies’ so it appears our firewall can do what we want. I’m not a cisco person. My knowledge is limited when it comes to configuration – that’s why we have SmartNet.
Can bandwidth be limited on end users and/or can they limit the ‘bandwidth rate limit’ to just youtube, steaming media, and downloads? If so, what should the limit be? and I’m assume this would be for ‘incoming’ traffic only? we’re running into some bandwidth hogs – usually youtube and/or streaming media. We have a Barracuda web filter which we’ve used to block and monitor activity but I simply do not have time to babysit this all day. I should also mention we do have critical data running up and down the pipe; such as credit card processing, DB replication between in house DB and hosted website, TPCx and EDI, FTP, and such that we don’t want restricted.
Could I configure and connect 3 Dell switches to an ASA-5525 Firewall which has got 8 interfaces.
View 7 Replies View Relatedi have cisco ASA 5510 Firewall using in my network, i have planning to upgrade the Flash memory from 256 mb to 512 mb and the RAM from 256 mb to 1GB.
View 1 Replies View RelatedTrying to copy the system image file from the sup-bootflash to a new 64MB ATA flash card. Yes the software can support the 64MB card.
The ATA flash card was formated successfully, however I cannot copy the system image to it so that it can boot after a power loss.
The command I tried was: console(enabled) copy sup-bootflash: slot0:
The source filename was typed in as shown in the Show Verison command.The result was: Error opening slot0: no such device.I suspect that I am missing something obvious as I am new to Cisco Switches.
I have ordered RP2 and it will be having 8GB default memory. What is the difference between memory & Physical memory?Since I am able to see only 4GB memory in my ASR 1004. [code]
View 1 Replies View Relatedit is possible use 1 or 2 Gb memory with ASA 5505 or only 512 Mb ?
View 3 Replies View RelatedI've deployed many Cisco PIX 501 v6.3.3 either as normal firewalling feature and/or with VPN features enabled. I noticed in all my deployments, regardless if it's during peak hours or after office hours, the memory utilization is always consistent 11MB utilized over the total of 16MB(memory default size).
View 3 Replies View RelatedI have an ASA that is logging the message %ASA-3-321007: system is low on free memory blocks of size 2048. I ran the "show blocks" command and the "Cnt" value for the 2048 blocks is 0. How do I reclaim these blocks and what are they used for?
View 1 Replies View RelatedI am trying to get experience with 8.4 code on my 5505. I purchased a Cisco 512MB memory upgrade and installed it. It booted up once and I thought I was ok. I then looked down and noticed that all lights were blinking on the front panel and I had no console access.
[code]...
I was looking at my CISCO ASA 5520 and i found something really strange
ciscoasa/VPN-context# sh mem detail
Used memory: 4259249568 bytes (793%)
------------- ----------------
Total memory: 536870912 bytes (100%)
but when I look at the system context this is what I see
ciscoasa# sh mem
Free memory: 170829000 bytes (32%)
Used memory: 366041912 bytes (68%)
------------- ----------------
Total memory: 536870912 bytes (100%)
As far as I know the ASA is working good.
Info of the device
Hardware: ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB