Cisco WAN :: 6500 IOS Upgrade Memory Requirement
Feb 20, 2013
I am upgrading 6500 switch from old ios to new one and the new one requires 512/512 memory to be free below is the show ver and sh sup-bootflash,
sw-cta2-i8-off>sh ver
Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9-VM), Version 12.2
[Code].....
View 1 Replies
ADVERTISEMENT
Apr 8, 2012
I am trying to load the anyconnect VPN client package v3 for windows and Mac on ASA 5510. The ASA has 256MB for RAM and Flash. After I uploaded pkg files and selected the 2 files and applied from ASDM, ASDM spots responding...
I tried to tftp the running config from ASA to my laptop to analyse but got "No memory available" message...
So it seems like the "unzip" process of the pkg files used up memory... what is really the requirement of the mini Memory/RAM on ASA for hosting anyconnect Clients for 2 OS platform? Requirement on Cisco web site is kind of vague.
View 4 Replies
View Related
Apr 8, 2013
We have a old Cisco ASA5540 firewall running on firmware version 7.0 and also a Firewall Service Module (FSWM) running on firmware version 2.3.
My question is if I would like to upgrade the Cisco ASA5540 firmware version to 7.1 above and the FWSM firewall version to 3.1 above, any requirement on the memory size or hardware to perform the firmware upgrade activity, do I require to do some memory or hardware module upgrade activty first before the firmware upgrade ?
Any restriction, shortcoming and pre-requites to do before the firmware upgrade activity ?
View 2 Replies
View Related
Dec 21, 2012
Currently my ASA5510 has a 64MB internal flash. Does the ASA require a higher capacity flash for an IOS upgrade from 7.2(x) to 8.2(x)? The Cisco Release Notes does not state any internal flash requirement, but just wanted to double check.
View 2 Replies
View Related
Dec 21, 2011
how can we upgrade 6500 non modular ios to normal 6500 ios?
View 5 Replies
View Related
Jan 23, 2013
We have a couple of 6500 series switches and have 3 BGP peerings to each. The 6500 series switches are loaded with WS-SUP720-3B Supervisor Engine. I believe there is a limit to the number of IPv4 routes WS-SUP720-3B supports(256,000). We also have "soft-reconfiguration inbound" configured on the BGP peerings. Thus when I do a "show ip bgp A.B.C.D" it displays three routes from 3 BGP peers and it displays an additional 3 "received-only routes" which I think is due to the "soft-reconfiguration inbound" configuration. We currently filter inbound routes from the BGP peers to be between /0 and /27
We are now looking to add another 2 BGP peerings. I am not too sure if the WS-SUP720-3B will be able to handle all the BGP routes. Is this limit of 256,000 IPv4 routes due to Processor memory limitation or is it software related? Would removing the "soft-reconfiguration inbound" save me some memory ?
View 1 Replies
View Related
Apr 24, 2011
i just noticed that im getting some alloc memory errors with a flexwan card i have on a cisco 6513 on slot 5/1, however i can't seem to figure out how to get more information on this and if the issue is related to the flexwan module or the DS3 card itself. Not really sure how to view memory stats/errors for a particular flexwan card on the 6500 platform. The 6500 has been up for a long time and rebooting it might work but i wanted to know what should be done before i reboot the 6500.
show log:
-Process= "Pool Manager", ipl= 0, pid= 5-Traceback= 6017FA60 60183D3C 6010BE4C 60110C24 60110D80SLOT 5/1: Apr 25 11:53:39: %SYS-2-MALLOCFAIL: Memory allocation of 816 bytes failed from 0x6010BE44, alignment 8Pool: Processor Free: 18848 Cause: Memory fragmentationAlternate Pool: None Free: 0 Cause: No Alternate pool
[Code] ....
View 5 Replies
View Related
Jul 20, 2011
How can we confirm the memory requirement for a RSP720-3c-ge card ?I got a link for 6500 series [URL]
View 2 Replies
View Related
Dec 12, 2011
What is used DDR memory on DFC on linecards for Cisco 7600 or Catalyst6500? I thought that DFC has copy of TCAMs from PFC. That PFC only has TCAMs, and it doesn't have DRAM on itself?
I've been said that if I have full BGP table in memory on supervisor on 6500 (that should be DRAM on RP on MSFC) that I also need 1GB additional memory on DFC on linecards? Is this true? But that should implied that DFC also has copy from MSFC not only from PFC, is this correct?
View 5 Replies
View Related
Nov 15, 2011
Since yesterday, i see
Nov 16 13:23:21.355: %SYSTEM_CONTROLLER-3-MORE_COR_ERR: 255 correctable DRAM memory errors in previous hour
Nov 16 13:23:21.355: %SYSTEM_CONTROLLER-3-COR_MEM_ERR: Correctable DRAM memory error. Count 623, log 8053C830
Nov 16 14:23:21.340: %SYSTEM_CONTROLLER-3-MORE_COR_ERR: 255 correctable DRAM memory errors in previous hour
Nov 16 14:23:21.340: %SYSTEM_CONTROLLER-3-COR_MEM_ERR: Correctable DRAM memory error. Count 879, log 8053C810
error on switch console every hour.
ios version : Cisco IOS Software, s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXJ1, RELEASE SOFTWARE (fc2)
View 4 Replies
View Related
Mar 24, 2011
Upgrading the memory on an 1841. After inserting a 256MB/PC133/SDRAM/DIMM it would not post during the boot, hangs.If i take out the chip it works fine.The on-board memory is 128, so the 256 is the max it would take to a total of 384. According to the documentation this should work.The memory chip is a Transcend chip, basically Samsung.
View 2 Replies
View Related
Jan 30, 2013
I wanted to know how many sodium memory slots the 1841 Routers have so i can upgrade to more then 128mb of DRAMI want ideally 256+on the Cisco website in the diagrams they dont say if it has 1 or 2 slots
View 8 Replies
View Related
Jan 30, 2012
I am trying to get experience with 8.4 code on my 5505. I purchased a Cisco 512MB memory upgrade and installed it. It booted up once and I thought I was ok. I then looked down and noticed that all lights were blinking on the front panel and I had no console access.
[code]...
View 5 Replies
View Related
May 11, 2011
Trying to figure out if I can upgrade this flexwan to 256MB and not sure is the card below already has 256MB total or 1 64MB per PA equaling 128MB total.
View 1 Replies
View Related
Feb 25, 2012
Currently I have C2801 with 256MB of memory and 64MB of flash. I want to upgrade it to 384MB / 128MB.Do I need to get MEM2801-256D or I can use any PC133 SDRAM (144PIN) for memory? 384 is maximum I can install? Do I need to get MEM1800-128CF or I can use any compant flash card? 128MB is maximum I can install? (I saw 256MB flash on for C2801)
View 10 Replies
View Related
Sep 16, 2010
I need to add memory to my ASA 55xx's (running 8.2(2)), some of which are config'd active/active or active/standby. The docs say that ram must be identical, which makes sense for production. My question is this: can I upgrade the standby units first, make them active, and then upgrade their mate? Or must I schedule downtime to take the pair down for the upgrade?
View 4 Replies
View Related
May 10, 2011
I upgraded our ASA5540 to 8.4, THEN noted the increased requirements for Memory. I purchased the 2Gig upgrade, but when installing in the Primary unit today, noted that there were 4 slots. Slots 1/3 had 512Mb modules, so I installed the 2 x 1Gig modules in slots 2/4.
The ASA5540 came up clean, and it "sees" the entire 3Gig of memory.
My question: Is this a SUPPORTED configuration? All documentation I have read only mentions 2Gig of memory. Also, If I had FOUR x 1Gig memory modules, would the ASA5540 support the 4Gigs of memory?
View 1 Replies
View Related
Jul 6, 2011
We want to run ASA 8.4.x on an old ASA5540. We need to upgrade its memory to 2 GB with the following memory upgrade: ASA5540-MEM-2GB=
I suspect that we will completely remove the existing 1 GB of memory and replace it with 2 GB. If this is the case, can I use this 1 GB of memory removed from the ASA5540 and put it in a ASA5510 instead of buying a ASA5510-MEM-1GB= for the ASA5510?
View 2 Replies
View Related
Aug 29, 2012
I have DSL 8Mbps DL and 768kbps UL,Internet -> Modem -> Cisco Router -> Firewall -> Switch Core - > Multiple switches like sfe2000p,CiscoRouter: i use port gig0/1 for PPPoE and i use port gig0/2 for LAN static,Router port gig0/2 with 122.54.144.153/29 connected directly to Firewall port13 with 122.54.144.154/29,i want 122.54.144.153/29 will my default gateway,Please include no limit bandwidth,filter etc at router, Firewall will be DHCP Server and control the bandwidth, filtering etc and the client computer should get 8Mbps.
View 2 Replies
View Related
Nov 7, 2011
I tried last night to upgrade the memory in my old 5510. It's about 5 years old and has the single memory socket. I followed the instruction included in the kit:
Mfr. Part#: ASA5510-MEM-1GB
I did wear an ESD wrist strap (genuine Cisco at that!) and ensured the memory was fully seated, the handles locked in.Upon restarting the ASA, for over 15 minutes, it stayed in mode: Power LED steady, Status LED flashing, other LEDs off. No response to attempts to SSL via Putty. I powered it off, verified the memory was indeed fully seated, and re-installed the original 256 MB module. It powered up normally in less than 5 minutes. Is there anything else to try before returning the memory? Tonight, I can try the same new memoy module and see if it works.
View 3 Replies
View Related
Mar 1, 2013
I recently upgraded the flash and the RAM on one of my ASA 5505 lab machines. The flash was upgraded from 128 to 512MB and the RAM was also upgraded from 256 to 512MB. I am using asa845-k8.bin. The firewall boots and runs file until you issue the reload command. The system shuts down but never reloads.
View 11 Replies
View Related
Oct 21, 2012
I have Catalyst 6509 E with redudant SUP720-3B (and MSFC3) running 12.2(18)SXF6 IP Services Lan Only IOS (this IOS requires 512MB DRAM and 64MB of flash) SUP has 512MB DRAM (458720K/65536K) and 512MB sup-bootdisk:, but, there is65536K bytes of Flash internal SIMM (Sector size 512K).
My question is can I put 12.2(33)SXJ3 IP Services Lan Only IOS to this 6500 because this IOS requires 512MB DRAM and 512MB od flash?This is "sh ver" and "dir all-filesystems" of my 6500:
cat6500#sh verCisco Internetwork Operating System Software IOS (tm) s72033_rp Software (s72033_rp-IPSERVICESK9-M), Version 12.2(18)SXF6, RELEASE SOFTWARE (fc1)Technical Support: [URL] Copyright (c) 1986-2006 by cisco Systems, Inc.Compiled Mon 18-Sep-06 23:59 by tinhuangImage text-base: 0x40101040, data-base: 0x42D90000
ROM: System Bo
View 6 Replies
View Related
Mar 5, 2013
I upgrade the IOS of my switch 3560 from C3560-IPBASE-M), Version 12.2(25)SEB4, To C3560-IPBASEK9-M), Version 12.2(55)SE5 after that the utilizatio of the memory increase to 80% I attached the output of show memory statistics history
View 5 Replies
View Related
Apr 4, 2011
I have an Acer Desktop Aspire AM3100 running Windows 7 Ultimate. I upgraded my memory. When I turned the PC back on I had lost my whole home network and cannot get internet acces back. I have checked my modem by direct connecting it to my laptop. I have checked my linksys box by doing the same. I can see the linksys on my laptop but cannot access the internet. On my desktop I get nothing?The home network and internet access all disappeared when I upgraded memory.
View 2 Replies
View Related
Mar 5, 2013
I have ordered RP2 and it will be having 8GB default memory. What is the difference between memory & Physical memory?Since I am able to see only 4GB memory in my ASR 1004. [code]
View 1 Replies
View Related
Oct 14, 2011
I have ACE10-6500-K9 installed in 6513 core switch with below mentioned sh version.
Software
loader: Version 12.2[121]
system: Version A2(2.0) [build 3.0(0)A2(2.0)]
system image file: [LCP] disk0:c6ace-t1k9-mz.A2_2_0.bin
[Code].....
I want to know that can i upgrade ACE10-6500-K9 to c6ace-t1k9-mz.A5_1_0 i.e version5 ? I tried to search cisco website but could not get proper upgrade or user guide.
View 2 Replies
View Related
Mar 25, 2012
how to upgrade IOS in switch 6500 connect in VSS from 12.2(33)SXI IOS to 12.2(33)SXJ?
View 3 Replies
View Related
May 21, 2012
I have WS-C6509-E chassis with VS-S2T-10G supervisor.
Currently I have IOS " S2TIBK9-15001SY - Cisco CAT6000-VS-S2T IOS IP BASE FULL ENCRYPT "
Can I upgrade the IOS to " S2TISK9-15001SY - Cisco CAT6000-VS-S2T IOS IP SERV FULL ENCRYPT " without purchasing this IOS?
Will I face issue in TAC cases?
View 1 Replies
View Related
Feb 22, 2012
i have cisco ASA 5510 Firewall using in my network, i have planning to upgrade the Flash memory from 256 mb to 512 mb and the RAM from 256 mb to 1GB.
View 1 Replies
View Related
Aug 20, 2012
We have an old BBSM server (BBSM-1190-K9) with win2000, that we hopefully will replace soon with ISE.I have tried to upgrade the memory in the server but the problem is that the server refuse to start after I have changed the memory.The original memory capsule is Apacer 512 MB ECC PC2-5300CL5, and we have tried with this.
Corsair Server DDR2 PC5300/667MHz ECC Reg. CL5 2GBand MT18HTF12872PY-667D2 BTC 1GB 240p PC2-5300 CL5 18c .There is no response at all on the screen, not even any pre boot messages or BIOS . Power on button only blinks slowly.
View 2 Replies
View Related
May 1, 2013
we have a customer who needs to perform upgrade on their Core 6500 Switch IOS from version 12.2(17d)SXB11a to 15.1SY.Is this a supported upgrade path and can it be done directly?
View 11 Replies
View Related
Jun 4, 2013
I am trying to upgrade Sup2T from 15.0 to 15.1 (same feature sets). I have the new image in bootflash and have changed the boot system statement to boot from the new image and the config register is 0x2102. However, everytime it reboots it loads the old image. [code]
View 4 Replies
View Related
Apr 15, 2013
Today we have 2 VSS, and are about to buy another two 6500 chassies to bulid a new VSS. Our currens chassies have supervisor 720, and the new one will probably have SUP2T
We have a network design that allowes us to run on a single chassie per VSS if we have hardware failure. This means that in a really worst case scenario we need to move around hardware to have 3 system up and running (that would mean multiple failures on all systems... so really really worst case scenario )
So here is my first question. Can I run a VSS with different supervisors in the chassies? Second question: If I want to upgrade a VSS from SUP720 to SUP2T, cna I run 2 supervisors per chassie (quad supervisor VSS) where one supervisor is SUP720 and one is SUP2T?
View 7 Replies
View Related